|
|
Order by: |
0 bids Free Shipping
Condition: Used Location: Billings, United States
This medical equipment is designed to meet your needs in the medical laboratory. It is manufactured by io Flex and is intended for use in various medical disciplines. The equipment is reliable and efficient, providing accurate readings and results. It is perfect for use in diagnostic testing, laboratory analysis, and other medical procedures. The brand is known for its quality and innovation, making it a top choice for healthcare professionals. This equipment is a valuable addition to any medical laboratory and is sure to provide you with the tools you need to provide effective medical care. I have 2 trays of medical tools. I don't know what they are.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
27pegs drying rack 2 X laboratory drying rack. There is a tray hole and a water outlet hose at the bottom for better drainage and leakage prevention. Size of the hanging nail: 12.5 0.9 0.9cm. Wall mounting brackets are included.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: Used Location: Garden City, United States
Manufacturer: Envisiontec. Model: D4K pro printer. Both units fully functional. Item Includes: washer, 3d printer, 2 power cords, build plate, basket & lid (both for washer). Technician Testing Notes.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description: Portable Dental Desktop Suction Base for Skilled Workers Laboratory Equipment This compact desk-top portable suction base brings a substantive revolution in polishing for skilled workers. It substituted the fixed suction inlet on the deskside. The bench needn’t be fixed cushions for making the suction inlet near. The suction hose is not only fixed on the deskside, but also can connect with other apparatus at any time. It has aobtained the national invention patent and practical new patent. Features: 1. This compact desk-top Portable Suction Base brings a substantive revolution in polishing for skilled workers. 2. It substituted the fixed suction inlet on the deskside. 3. The bench needn't be fixed cushions for making the suction inlet near. 4. The suction hose is not only fi.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
It has aobtained the national invention. 1X Dental Portable Desktop Suction Base. cushions for making the suction inlet near. The suction hose is. This compact desk-top Portable Suction Base brings a substantive revolution in polishing for skilled workers.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Press Dentistry Injection System 400W 110V 282-288 ° C. ★ the Denture Injection Unit Consists of a Heater and a Hot Press. 3 the Heater Will Beep When It Is Heated. 1x Hot Press. 2 the Function of the Hot Press Is to Inject Molten Material into a Previously Prepared Flask.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
0 bids $6.00 Shipping
Condition: New Location: Chino, United States
This is Reline Jig for dental laboratory use. USA Denshine Dental LED Fiber Optic High Speed Handpiece E-Generator 2-Holes FDA. Denshine Dental 5W Wireless Cordless LED Curing Light Lamp 1500mw - BLACK FDA .
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids $24.00 Shipping
Condition: Used Location: Omaha, United States
This Visi-Blue™ transilluminator is UV safe and converts 365nm UV to (460 to 470nm) blue light for use with various stains including GFP stains, SYBR green and SYPRO orange. These transilluminators are designed for use with GFP stains.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
0 bids $10.00 Shipping
Condition: New Location: , China
This is a very well made flask for Dental Lab Press. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
27pegs drying rack 2 X laboratory drying rack. There is a tray hole and a water outlet hose at the bottom for better drainage and leakage prevention. Size of the hanging nail: 12.5 0.9 0.9cm. Wall mounting brackets are included.
0 bids $9.95 Shipping
Condition: Used Location: Gilbert, United States
Agencies that may be applicable. Certification required before use. wearing of an item if applicable, maintenance/operations, care of item or any. for full details on proper usage of the item, instruction for fitting and.
Buy It Now
Free Shipping
Condition: New Location: , United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Press Dentistry Injection System 400W 110V 282-288 ° C. ★ the Denture Injection Unit Consists of a Heater and a Hot Press. TypeDental Lab Flexible Denture Machine. 3 the Heater Will Beep When It Is Heated.
0 bids Free Shipping
Condition: Used Location: San Jose, United States
It's very clean and varying perfectly. I have multy equipments and need more room
0 bids $5.00 Shipping
Condition: New Location: , United States
Dental LED Curing Light Lamp Wireless Cordless Resin Cure 10W 2000MW USA FDA. Dentist Dental LED Curing Light Lamp Wireless Cordless Resin Cure 10W 2000MW USA. Denshine Dental Slow Low Speed Handpiece Contra Angle Straight Air Motor 2/4Hole.
Buy It Now
Free Shipping
Condition: Used Location: Phoenix, United States
This item is used. The square block is about 1 15/16" wide.
0 bids $6.00 Shipping
Condition: New Location: Chino, United States
This is Reline Jig for dental laboratory use. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. (Amy-China-Beijing-86-13578947868).
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: Used Location: Detroit, United States
Model: NORDSON DAGE 4000 TPAXY (2014). NORDSON DAGE 4000 TPAXY Bond Tester, used, available for sale. Ideal for enhancing your testing capabilities. 4000 TPAXY. NORDSON DAGE.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
0 bids $19.00 Shipping
Condition: Used Location: Norristown, United States
Working perfectly. Includes carrying case and 8 mounting plates.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
0 bids Free Shipping
Condition: Used Location: Portland, United States
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
0 bids Free Shipping
Condition: Used Location: , Canada
This item was in used condition when received and inspected at our facility.
0 bids Free Shipping
Condition: Used Location: Jeffersonville, United States
This is a high-quality Particulate Filtration Efficiency Tester designed for laboratory testing. It is a reliable and efficient equipment that is perfect for healthcare, lab, and dental facilities. The device is made by GBPI and is modeled after the GB-KF30010. With this testing equipment, you can accurately determine the particulate filtration efficiency of your products. It is a must-have for anyone in the business and industrial sectors who wants to ensure their products meet the required standards. Get your hands on this lab testing equipment today and take your business to the next level.
0 bids Free Shipping
Condition: New Location: , United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
0 bids Free Shipping
Condition: New Location: , United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: Used Location: Arlington Heights, United States
It is a testing sieve that is perfect for use in various healthcare, lab, and dental procedures. The unit quantity is one, and the country/region of manufacture is unknown. U S STANDARD SIEVE NO 5.
0 bids Free Shipping
Condition: Used Location: Detroit, United States
Model: LAURELL WS-400B.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids $17.65 Shipping
Condition: Used Location: Brownsville, United States
It was manufactured in an unknown country/region and is suitable for use in a variety of healthcare and lab settings.
0 bids $494.99 Shipping
Condition: Used Location: Saint Paul, United States
Model/Cat # 600DS. Alcon Lab 600DS Ophthalmic Surgical Console. Manufacturer Alcon Technologies. Alcon Accurus Ophthalmic System Conductive Air Hose W/ 6250 Coupler. Alcon Surgical Accurus Operator Manual.
Buy It Now
$6.00 Shipping
Condition: New Location: Kent, United States
USA Dental Reline Jig Single Compress Press Lab Equipment Simple Operation. Condition is New. Shipped with USPS Ground Advantage.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
0 bids Free Shipping
Condition: New Location: , United States
Perfect for creating comfortable and secure dentures for patients. 1pcs Dental Reline Jig. FDA declaration.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
|
|
|
|