|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Walnut, United States
And it is applied to cutting, grinding, polishing. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc.
0 bids Free Shipping
Condition: New Location: Fontana, United States
ETERFANT Dental Marathon Electric Micro Motor Polisher Micromotor N3 S05 0-35K. - Regularly sterilize the polisher to maintain hygiene and prevent infection. Ideal for use in dental laboratories and dental clinics.
Buy It Now
Free Shipping
Condition: New Location: , United States
Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity. Cut off the power when finish. Wash the surface of the machine frequently to keep clean, so as to extend the service life.
0 bids $34.35 Shipping
Condition: New Location: Monroe Township, United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
Buy It Now
$6.44 Shipping
Condition: Brand New Location: The Rocks, AU
1x 10pcs Set Dental Tool Kit. A set of handy dental tool for teeth cleaning. Colour: Silver. Material: Stainless Steel. By communicating, we’ll find an agreeable solution to any problem.
0 bids Free Shipping
Condition: New Location: Chino, United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm Statement (FDA, ARTG) The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. If you have any problem. Please contact us through eBay Message and we will gladly assist you.
0 bids Free Shipping
Condition: New Location: , United States
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. FDA Declaration.
0 bids Free Shipping
Condition: New Location: Austell, United States
Features: 1. This Dust Collector Is Mainly Used in Industry Enviroment. It Can Collect All the Dusts in the Air Easily to Protect Pollution to the Air. 2. the Dusct Collector Is Located in an Rectangular Box. Good and Simple Design. It Is Easy to Maintenance the Motor. 3.It Can Be Placed Under the Dental Laboratory Bench or Other Places, so That It Will Be Very Convenient to Collect the Dust. 4. the Collector Motor Comes with Strong Power, High Efficiency, Low Noise and Cost down Specifications. Specifications： Voltage: 110v/60hz ± 10% Power: 370w Maximum Pressure: 17kpa Airflow Amount: 70m³/H Maximum Vacuum: -9.8kpa Maximum Noise Intensity: -60db Dimensions: 35 X 20 X 35cm Weight：9kg Notes This Product Should Work with Good Power Supply Cable.
0 bids Free Shipping
Condition: New Location: Fontana, United States
And Drug Administration and state and local regulatory agencies. Working Pressure For High Speed Hand Piece: 0.36Mpa. Working Pressure For Low Speed Hand Piece: 0.34Mpa. Start-up Pressure: 0.5Mpa. Max Pressure: 0.8Mpa.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids $38.00 Shipping
Condition: New Location: Chino, United States
Polisher Polishing Machine Dental Lab Lathe Bench Buffing Grinder Jewelry 110V. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation.
0 bids Free Shipping
Condition: New Location: Chino, United States
The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean.
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: , PK
1 pc Double Denture Flask Clamp / Press. 1 pc Upper Denture Flask. 1 pc Lower Denture Flask. Upper / Lower Dental Flask Press Set. Forged Brass Alloy Construction. Set Weight: 4 kg. 1 Set contains.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Investment Vibrator 4" Round Shaker Oscillator Dental Lab Equipment USA This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications Voltage: 110v/60Hz ±10% Power: 100W Dimensions: 14x15x11cm Statement (FDA, ARTG) The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. If you have questions about legal obligations regarding sales of med.
Buy It Now
$11.57 Shipping
Condition: New Location: Chino, United States
Dental Lab Square Vibrator Vibration Model Oscillator Equipment 120w 110v This Is a Big Power, High Efficiency Vibrator, the Unique Design of Heat Radiation Base Make It Always Work in Long Time. It Has Two Grades, Weak Grade, Strong Grade, Can Be Changed As Necessary. Before Power on, Put the Switch in the Middle Part “O”, and Then Power on, Turn on the Switch (the Indicator Light Comes on), and Choose the Strong Grade or Weak Grade, Finally Turn on the Switch Two or Switch One, It Starts to Work. Features: Voltage: 110v/60hz+-10% Power: 120w Maximum Load:<=2kg Dimension:20.5×15.5×10cm (Inner Packing Size) Package Including: 1x New Jt-51b Small Square Dental Vibrator.
Buy It Now
Free Shipping
Condition: New Location: Chantilly, United States
Upgrade your dental laboratory with RMH3 Dental Lab Pans and experience the difference in your workflow. Maximize your productivity and enjoy the benefits of a well-organized, color-coded workflow with RMH3 Dental Lab Pans.
0 bids Free Shipping
Condition: New Location: Chino, United States
High Security: The reinforced power cord interface is durable and safe. And it has an anti-dry burning function. Open the lid of the autoclave, take out the sterilized inner cylinder in the autoclave, and pour more than 3.5L/0.925Gal of water into the electric heating tube.
Buy It Now
Free Shipping
Condition: Used Location: Hudson, United States
This sale is for 3 Dispensers as shown. We own and operate a modern 60,000 SQ foot Facility in Florida and a 66,000 SQ foot facility in Georgia. The #1 Source for Everything Dental. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Gresham, United States
The electric motor matches the "E"type international interfaceIt can be matched with 1:5,1:1,16:1 internal waterway handpiece. Dental LED Electric Motor Minimally invasive repair,polishing,pulp preparation hole,etc.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Dental Polishing and Grinding Box 1 Accessory Kit 1. Max vacuum: -8.8Kpa. - The baffle plate is made of tempered glass, which prevents the spread of dust during the sandblasting process and reduces the harm of dust to human body;.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Press Dentistry Injection System 400W 110V 282-288 ° C. ★ the Denture Injection Unit Consists of a Heater and a Hot Press. 3 the Heater Will Beep When It Is Heated. 1x Hot Press. 2 the Function of the Hot Press Is to Inject Molten Material into a Previously Prepared Flask.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
0 bids Free Shipping
Condition: New Location: Fort Lauderdale, United States
PRECISE CANADA. CARE FOR YOUR LIFE AND HEALTH. Material: Premium Grade Stainless Steel. Choose The Deal and Compare Prices.
Buy It Now
Free Shipping
Condition: New Location: , United States
High Security: The reinforced power cord interface is durable and safe. And it has an anti-dry burning function. Open the lid of the autoclave, take out the sterilized inner cylinder in the autoclave, and pour more than 3.5L/0.925Gal of water into the electric heating tube.
0 bids Free Shipping
Condition: New Location: Fontana, United States
ETERFANT Dental Agar Duplicating Mixer Hydrocolloid Mixing Heating Machine Automatic Dental Lab Gel Mixer Stirrer. - If the pot contains frozen solid agar, do not attempt to stir it directly. - When the machine is working, the agar added in the pot should not be less than 2kg.
0 bids Free Shipping
Condition: New Location: Chino, United States
Sturdy and rugged for years of use, case after high quality case. FDA declaration .
Buy It Now
Free Shipping
Condition: New Location: Rialto, United States
Adjustable Height: 75.5-115cm/29.72-45.28in. Wheel Type: 4 Lockable Universal Wheels. Material: SPCC. Adjustable Height75.5-115cm/29.72-45.28in. Wheel Type4 Lockable Universal Wheels. 4 Universal Wheels.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental electric Micromotor Motor Polishing Handpiece 35K RPM Introduction: Micro motor DENTAL Handpiece is an instrument made with motor and used for working with the turning force from the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc. Feature: 1. Portable Design-it is very convenient to use and take Installed special ball bearings for super high speed (So do not need add oil) 2.35,000 RPM's provides higher speeds, greater torque 3. Newly designed front nose.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Quiet, powerful, and highly durable, this is the perfect tool for any dentist! Feature 3Compact Design,Unique Appearance. 2FeaturtesCreative Design,Durable Material,Beautiful Appearance. Feature Creative Design,Durable,Beautiful Appearance.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Lab Vacuum Forming Molding Former Heat Equipment Thermoforming Machine US.
Buy It Now
$4.99 Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
$5.00 Shipping
Condition: New Location: Chino, United States
★ the Denture Injection Unit Consists of a Heater and a Hot Press. TypeDental Lab Flexible Denture Machine. Press Dentistry Injection System 400W 110V 282-288 ° C. 3 the Heater Will Beep When It Is Heated.
0 bids Free Shipping
Condition: New Location: La Puente, United States
A Good Tool Is Indispensable for Tedious Vibration Work. Our Dental Square Quartet Vibrator Is Mainly Made of Various High-quality Materials and Adopts a Painting Process to Ensure That You Can Use It for a Long Time. Good Performance(120w) Can Make Your Vibration Work More Efficient. It Will Be a Good Helper in Your Work.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
$7.00 Shipping
Condition: New Location: Monroe Township, United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
0 bids Free Shipping
Condition: New Location: Cranbury, United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle. Fully adjustable.
Buy It Now
$9.45 Shipping
Condition: New Location: Chino, United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
Buy It Now
$5.00 Shipping
Condition: New Location: Chino, United States
Features: 1. This centrifugal casting machine is indispensible for the production of high quality oral restorations. Durable and reliable,our casting apparatus easily handles most alloys with high melting-points that are used by dentists. 2. Cast denture frames, inlays, and crown bridges with ease! This item features a heavy duty spring and an adjustable balance mechanism and comes with 3 cradles and a pair of tongs. Specification: Dental Centrifugal casting machine(AE-5) Weight: 13kg Speed: 7000rpm Package Including: 1 X Centrifugal Casting Machine Dental Lab Equipment Teeth Healthy.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
1.Description Dental Lab Model Arch Trimmer Trimming sides of plaster models Machine 2800rpm 2.What's Included? Dental Model Arch Trimmer Machine: 1 set 3.Features&Highlights This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. 4.Weights&Dimensions Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg 5.Specifications Power Supply:110V 60Hz(US PLUG) Power Consumption:140W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Statement (FDA, ARTG) The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation,.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Quiet, powerful, and highly durable, this is the perfect tool for any dentist! The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids Free Shipping
Condition: New Location: , United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
0 bids Free Shipping
Condition: New Location: , United States
Laser Drill?Machine?Pin?System. (CICI-China-86-18328503374). FDA declaration .
Buy It Now
Free Shipping
Condition: New Location: Fullerton, United States
Bio-Art Vacuum Forming Sheets have been specially developed for use by dental professionals with the objective of enabling the production of trays for all kinds of applications (fluoridation, bracket fixation, plate for bruxism, surgical guide, matrix for temporary prosthetic teeth, etc.).
0 bids $5.00 Shipping
Condition: New Location: , China
1 Piece New Style Wax Carver Heater. Temperature regulation ： 0°C - 150°C.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
|
|
|
|