|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Polisher Polishing Machine Dental Lab Lathe Bench Buffing Grinder Jewelry 110V. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Fullerton, United States
The product is mainly composed of a sensor, an adaptor, a USB connection cable and workstation software. Detector Technology. AD Conversion(bit). Display resolution： 1440 900 or above. Active Area(mm).
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specifications: Product Name: Beauty Instrument Cart Table Size: Length 35.5 X Width 33.5cm Panel Color: White Package Size: 68.5 * 37 * 15cm Weight: 6.1kg Scope of Use: Beauty Salon, Barber Shop, Studio Whether the Socket Is Equipped With：yes（Us Socket) Voltage: 110v,60hz Max Load: 45kg Features: High Quality Material, Environmental Protection. It Is Easy to Install and Use. Trolley with Pulley, Easy to Move. With Storage Box, Small Objects Can Be Placed. With Socket Design, Efficient and Convenient. Packing List: 1 X Beauty Instrument Cart 1 X 110v Power Cord.
0 bids $4.00 Shipping
Condition: New Location: , United States
510(K)Number: K161892. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. (Leezoe-China-Beijing-86-15963302815). FDA declaration.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Features: 1. This centrifugal casting machine is indispensible for the production of high quality oral restorations. Durable and reliable,our casting apparatus easily handles most alloys with high melting-points that are used by dentists. 2. Cast denture frames, inlays, and crown bridges with ease! This item features a heavy duty spring and an adjustable balance mechanism and comes with 3 cradles and a pair of tongs. Specification: Dental Centrifugal casting machine(AE-5) Weight: 13kg Speed: 7000rpm Package Including: 1 X Centrifugal Casting Machine Dental Lab Equipment Teeth Healthy.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Lab Vacuum Forming Molding Former Heat Equipment Thermoforming Machine US.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Quiet, powerful, and highly durable, this is the perfect tool for any dentist! Your satis faction is our ultimate goal.
0 bids Free Shipping
Condition: New Location: Fontana, United States
And Drug Administration and state and local regulatory agencies. Working Pressure For High Speed Hand Piece: 0.36Mpa. Working Pressure For Low Speed Hand Piece: 0.34Mpa. Start-up Pressure: 0.5Mpa. Max Pressure: 0.8Mpa.
0 bids Free Shipping
Condition: New Location: , United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle.
0 bids Free Shipping
Condition: New Location: Rialto, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
$49.90 Shipping
Condition: New Location: , United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
0 bids Free Shipping
Condition: New Location: La Puente, United States
A Good Tool Is Indispensable for Tedious Vibration Work. Our Dental Square Quartet Vibrator Is Mainly Made of Various High-quality Materials and Adopts a Painting Process to Ensure That You Can Use It for a Long Time. Good Performance(120w) Can Make Your Vibration Work More Efficient. It Will Be a Good Helper in Your Work.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
$5.00 Shipping
Condition: New Location: Chino, United States
Dental Square Vibrator Model Vibration Oscillator Platform Vibrating Equipment Description: • This is a big power, high efficiency vibrator, the unique design of heat radiation base make it always work in long time. • It has two grades, weak grade, strong grade, can be changed as necessary. • Before power on, put the switch in the middle part “O”, and then power on, turn on the switch (the indicator light comes on), and choose the strong grade or weak grade, finally turn on the switch two or switch one, it starts to work. Features: Voltage: 110V/60Hz+-10% Power: 120W Maximum load:<=2KG Dimension:20.5×15.5×10cm (Inner packing size) Package Including: 1X New JT-51B Small Square Dental Vibrator.
0 bids Free Shipping
Condition: New Location: , United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
Buy It Now
$82.65 Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Power: 120W. 1x New JT-51BX Small Square Dental Vibrator. you should consult with the FDA's Center for Devices and Radiological Health The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and.
0 bids Free Shipping
Condition: New Location: Fontana, United States
ETERFANT Dental Agar Duplicating Mixer Hydrocolloid Mixing Heating Machine Automatic Dental Lab Gel Mixer Stirrer. - If the pot contains frozen solid agar, do not attempt to stir it directly. - When the machine is working, the agar added in the pot should not be less than 2kg.
0 bids Free Shipping
Condition: New Location: Gresham, United States
E-Type Motor Connection to your straight & Contra Angle Handpiece. Dental Lab MARATHON Micromotor Machine N3 + 35K RPM Polishing Handpiece 110/220V. Dental Lab MARATHON Handpiece 35K RPM + Micromotor N3 220V/110V New.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids $10.00 Shipping
Condition: New Location: , United States
Laser Drill?Machine?Pin?System. FDA declaration .
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: Used Location: Quincy, United States
Used from local dental lab, most are near full, I see one that is empty, the number 701, top left. Please see pictures. pan
Buy It Now
$4.00 Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , United States
Features: Voltage: Ac 110v/60hz Power: 400 Watts Heating Temperature: 282-288 ° C Pressurization Time: 7 Minutes 30 Seconds - 11 Minutes Packing Size: 40*34*57cm Gross Weight: 30kg The Package Includes: 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1xproduct Brochure.
Buy It Now
$5.00 Shipping
Condition: New Location: Chino, United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
0 bids $30.00 Shipping
Condition: New Location: , China
Braces forming, forming and making of bleaching braces. Base forming, forming and production of temporary, permanent base and mouthguard. Place the forming sheet on the forming machine, clamp it, lift it to the heating place, and place the finished model on the vacuum suction cup of the vacuum forming machine.
Buy It Now
Free Shipping
Condition: New Location: Woodland, United States
Use for repair of minor problems occurring most frequently in dental units. Kit includes 1/4" Plastic Sleeve 10 ea. 1/8" Plastic Sleeve 10 ea. 1/4" Poly Sleeve 5 ea. 1/4" Poly Nut & Sleeve 2 ea.
0 bids Free Shipping
Condition: New Location: Gresham, United States
35K R.P.M. handpiece 1 PC. SDE-37L Motor Handpiece for Dental Lab and jewelry beauty wood carving. MARATHON Handpiece High-speed 0-35,000rpm. MARATHON Motor Handpiece Instructions for use. FDA for Handpiece: 510(K) Number: K181691, Regulation Number: 872.4200, Classification Product Code: EFB, Subsequent Product Code: EGS.
Buy It Now
Free Shipping
Condition: New – Open box Location: , United States
Dental Model Square Vibrator Vibration Model 130/120w Oscillator Vibrating Equip SKU: JT-51BX This is a big power, high efficiency vibrator, the unique design of heat radiation base make it always work in long time. It has two grades, weak grade, strong grade, can be changed as necessary. Before power on, put the switch in the middle part “O”, and then power on, turn on the switch (the indicator light comes on), and choose the strong grade or weak grade, finally turn on the switch two or switch one, it starts to work. Features: Voltage: 110V/60Hz+-10% Power: 120W Maximum load:<=2KG Dimension:20.5×15.5×10cm (Inner packing size) Package Including: 1x New JT-51BX Small Square Dental Vibrator --------------------------------------------------------.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids $49.90 Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
$70.00 Shipping
Condition: New Location: , China
This JT-16 Laser Pinhole Drilling Unit features high RPM, low noise, and easy operations. The laser beam positioning system ensures high precision operations. The drilling depth can be adjusted within 0.15mm.
Buy It Now
Free Shipping
Condition: New Location: Fullerton, United States
Sterilizer temperature ： 121 ℃. Tank capacity: 18L. Adding about 800 ml of distilled water. Close the door cover, tight the rotate handle. Pressure Gauge in red area. Inside capacity ： 14 Liter. Connect steam exhaust pipe with the steam vent ， before operation.
0 bids Free Shipping
Condition: New Location: Chino, United States
Polisher Polishing Machine Dental Lab Lathe Bench Buffing Grinder Jewelry 110V Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids $20.00 Shipping
Condition: New Location: Cranbury, United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle.
0 bids $5.17 Shipping
Condition: Brand New Location: Parramatta, AU
X1. Orthodontic Adam Plier TC.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , China
(It is mainly for your piece of mind and comfort.). ◆Keep it away from sun or snow or rain during transportation. ◆Excess impact or shake should be avoided during trans portation. Power wire 1pc.
0 bids $38.00 Shipping
Condition: New Location: Chino, United States
Polisher Polishing Machine Dental Lab Lathe Bench Buffing Grinder Jewelry 110V. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation.
Buy It Now
Free Shipping
Condition: New Location: Fullerton, United States
Dental Lab Marathon Electric Micromotor Polishing Unit / 35K rpm Motor Handpiece. Vacuum Forming Machine is specially designed for dental applications. Durable and user-friendly, our Vacuum Forming Machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental 4" Round Vibrator Speed-Adjustable Variable-Intensity Model Oscillator US.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Thanks a lot for your choosing our products, please look at the PRODUCT INSTRUCTION before using. Our MODEAL VIBRATOR is for making plaster model in the mechanic chamber of the oral section. 1.Basic Structure The vibrator is mainly composed of pedestal and vibrator plate. It is also installed the knot for adjusting the intensity of the vibration. 2.Operation Steps After connecting the power, put the plastic model on the plate, and turn on the adjusting knob. Clockwise direction is to increase the intensity of vibration. Counterclockwise is to reduce the intensity of vibration. Turn off the knob to stop the vibration after the model finishes vibration processing. Then take it off for use. 3.Notices Guarantee the ground line of the power is working. While vibrating, do not a.
Buy It Now
$2.99 Shipping
Condition: New Location: , China
Material :Rubber. Color: Blue. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: Fontana, United States
Weak saliva suction device 1 set. - Ergonomically designed with powerful suction, stable performance, and low noise. - Good air ventilation reduces noise and heat. - The suction motor can operate continuously for 8-10 hours, with an internal electronic thermostat for extended life.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: , China
Buy It Now
Free Shipping
Condition: New Location: Fullerton, United States
And it is applied to cutting, grinding, polishing. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc.
Buy It Now
$2.90 Shipping
Condition: New Location: , China
Type: Dental Tool Set. Features: Explorer Probe, Plier, Dental Examination Mirror. Dental Examination Mirror Length: 16.1cm. Material: Stainless Steel. Highly polished finish for aesthetic and corrosion resistance.
0 bids Free Shipping
Condition: New Location: Fullerton, United States
Vacuum Forming Machine is specially designed for dental applications. Durable and user-friendly, our Vacuum Forming Machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg.
Buy It Now
$39.31 Shipping
Condition: New Location: Chino, United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
|
|
|
|