|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Gresham, United States
SDE-37L Motor Handpiece for Dental Lab and jewelry beauty wood carving. MARATHON Handpiece High-speed 0-35,000rpm. MARATHON Motor Handpiece Instructions for use. FDA for Handpiece Installed special ball bearings for super high speed (So do not need add oil ).
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Product Name：Dental Amalgamator Models: IMIX-M3, IMIX-M6 Shell Material: Plastic Power: According to the Nameplate Motor Power: 35W Storage Conditions: -10∽40℃, Relative Humidity≤80%, No Corrosive Gas and Ventilated Places. Warranty: 1 year Package Included 1* Dental Amalgamator 4* Springs 2* Fusing core 0.5A Ф5X20 1* English Instruction 1* Warranty Card.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Color: Blue Material: Aluminum, Stainless Steel Process: Painting Plug Type: US Standard Voltage: 110V, 60Hz ±10% Power: 1000W Heating Power: 600W Molding Power: 800W Power Cord Length: 1.2-1.5m/3.94-4.92ft Molding Size: 110*110mm/4.33*4.33in Product Size: 25*21*30cm/9.84*8.27*11.81in Package Size: 30*25*21cm/11.81*9.84*8.27in Gross Weight: 6kg/13.28 lbs Net Weight: 6kg/13.28 lbs Package Included 1* Forming Machine Notes 1.Please note that this product does not include diaphragms. 2.Please note that after using the machine, do not forget to turn off the heating switch, otherwise, it may burn out the heater. 3.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before o.
0 bids Free Shipping
Condition: New Location: Chino, United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm Statement (FDA, ARTG) The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. If you have any problem. Please contact us through eBay Message and we will gladly assist you.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
FEATURES: 1. Professional in dipping the wax 2. There is a effictive temperature-fixed adjustment,can set the temperature+/-℃ 3. Good at heat conduction and insulation 4. Easy to operate and use 5. Melting the wax quickly and keep them in liquid status 6. Equipped digital CPU circuit and set/keep temperature needed 7. Easy to compare pre-set temperature and current temperature 8. LED display heating automatically,LED will shut off when arrving temperature set 9. Easily recognize the specially situation becase of accurate temperature sensor.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: , United States
Then you will need an item that can destroy bacteria. Steam Autoclave: Under the high temperature of 126-128 ℃/258.8-262.4 ℉, steam can kill 99% of bacteria in about 15 minutes. Open the lid of the autoclave, take out the sterilized inner cylinder in the autoclave, and pour more than 3.5L/0.925Gal of water into the electric heating tube.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean.
Buy It Now
$49.90 Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Remarks: Before operation this therapeutic device need to connect with oil free compressor. Clean water bottle 600ML. 1 set. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
$8.00 Shipping
Condition: New Location: La Puente, United States
Product Description: ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. . ★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time. ★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists. ★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Dental Polishing and Grinding Box 1 Accessory Kit 1. Max vacuum: -8.8Kpa. - The baffle plate is made of tempered glass, which prevents the spread of dust during the sandblasting process and reduces the harm of dust to human body;.
Buy It Now
$7.00 Shipping
Condition: New Location: Monroe Township, United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
$4.50 Shipping
Condition: New Location: , China
2.6/12 pits porcelain plate with porcelain cover for mixing dentin powderglaze. Also suitable for technician glaze in the lab. Whitening flawless porcelain, color can be more accurate. cover another area can be used as a toner.
0 bids $6.40 Shipping
Condition: New Location: , China
Battery adapter output : 5V-1A. Output : 1.8W Max. Battery adapter input : 100V-240V 0.5A Max. The main unit cannot be autoclaved. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: Chantilly, United States
Upgrade your dental laboratory with RMH3 Dental Lab Pans and experience the difference in your workflow. Maximize your productivity and enjoy the benefits of a well-organized, color-coded workflow with RMH3 Dental Lab Pans.
0 bids Free Shipping
Condition: New Location: , United States
Laser Drill?Machine?Pin?System. (CICI-China-86-18328503374). FDA declaration .
0 bids Free Shipping
Condition: New Location: Cranbury, United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle. Fully adjustable.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Quiet, powerful, and highly durable, this is the perfect tool for any dentist! Intended Use/DisciplineDental Laboratory. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Quiet, powerful, and highly durable, this is the perfect tool for any dentist! Your satis faction is our ultimate goal. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Motor rotational speed:2,800rpm. Intended Use/DisciplineDental Laboratory. Your satis faction is our ultimate goal.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Jeannette, United States
Vacuum Forming Trays. Select your quantity upon checkout. NOT the manufacturers of these vacuum forming trays. Also, can have an adhesiveness to acrylics on a variety of dental applications. Therefore reasonable care has been taken in the preparation of such information.
0 bids Free Shipping
Condition: New Location: , United States
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids Free Shipping
Condition: New Location: Chino, United States
Sturdy and rugged for years of use, case after high quality case. FDA declaration .
Buy It Now
$7.50 Shipping
Condition: New Location: Chino, United States
With Storage Box, Small Objects Can Be Placed, It Is Convenience to Clean. ♛ 【Wide Applications】the De-ntal Multifunctional Silent Foot Brake Trolley Is Widely Used. Trolley with Pulley, Easy to Move.
0 bids Free Shipping
Condition: New Location: , China
1 AR Heater. Resin(for filling). Resin(for bonding). 3.2 Heating temperatue range:40℃-70℃，±1℃. 3.1 Power adapter：. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids Free Shipping
Condition: New – Open box Location: Norfolk, United States
Lithium Disilicate Amber Press Ingots. LT R10/W1 - 2 Ingots. LT R10/W2 - 5 Ingots.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Fort Lauderdale, United States
Material: Premium Grade Stainless Steel. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. PRECISE CANADA. CARE FOR YOUR LIFE AND HEALTH.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Fullerton, United States
Bio-Art Vacuum Forming Sheets have been specially developed for use by dental professionals with the objective of enabling the production of trays for all kinds of applications (fluoridation, bracket fixation, plate for bruxism, surgical guide, matrix for temporary prosthetic teeth, etc.).
Buy It Now
$6.44 Shipping
Condition: Brand New Location: The Rocks, AU
1x 10pcs Set Dental Tool Kit. A set of handy dental tool for teeth cleaning. Colour: Silver. Material: Stainless Steel. By communicating, we’ll find an agreeable solution to any problem.
0 bids Free Shipping
Condition: New Location: , PK
1 pc Double Denture Flask Clamp / Press. 1 pc Upper Denture Flask. 1 pc Lower Denture Flask. Upper / Lower Dental Flask Press Set. Forged Brass Alloy Construction. Set Weight: 4 kg. 1 Set contains.
Buy It Now
$9.45 Shipping
Condition: New Location: Chino, United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
Buy It Now
Free Shipping
Condition: New Location: Fullerton, United States
High Speed Handpiece Pipe 1pc. Low Speed Handpiece Pipe 1pc. Dental High & Low Speed Handpiece Kit 4 Hole. Portable Dental Unit with Air Compres s or. Model:BD-406 Portable Dental Unit. High speed handpiece.
Buy It Now
Free Shipping
Condition: New Location: Fontana, United States
Portable Dental Unit Air Compressor Curing Light Ultrasonic Scales 4H (AS-ZL01). 4.Built-in ultrasonic scaler-Woodpecker 1 set. 11.600ML Waste water bottle 1 set. Working Pressure For High Speed Hand Piece: 0.36Mpa.
0 bids Free Shipping
Condition: New – Open box Location: Garden City, United States
Item Includes: MicroEtcher II. Model: MicroEtcher II. Manufacturer: Zest Dental. This unit is new/unused. New, unused. Any party that unsuccessfully challenges the enforceability of this Choice of Law and Forum Selection clause shall reimburse the prevailing party for its attorney fees and costs associated with defending against the challenge of said clause.
0 bids $21.00 Shipping
Condition: New Location: Chino, United States
Power : 500W. Fashionable design,safety of insulation is good. Sealing machine ( SEAL 80). Sealing width : 250mm (Max.). Press Width : 10mm. Net weight : 5 kg.
0 bids $17.70 Shipping
Condition: New Location: Chino, United States
High Security: The reinforced power cord interface is durable and safe. And it has an anti-dry burning function. Open the lid of the autoclave, take out the sterilized inner cylinder in the autoclave, and pour more than 3.5L/0.925Gal of water into the electric heating tube.
0 bids Free Shipping
Condition: New Location: Austell, United States
Features: 1. This Dust Collector Is Mainly Used in Industry Enviroment. It Can Collect All the Dusts in the Air Easily to Protect Pollution to the Air. 2. the Dusct Collector Is Located in an Rectangular Box. Good and Simple Design. It Is Easy to Maintenance the Motor. 3.It Can Be Placed Under the Dental Laboratory Bench or Other Places, so That It Will Be Very Convenient to Collect the Dust. 4. the Collector Motor Comes with Strong Power, High Efficiency, Low Noise and Cost down Specifications. Specifications： Voltage: 110v/60hz ± 10% Power: 370w Maximum Pressure: 17kpa Airflow Amount: 70m³/H Maximum Vacuum: -9.8kpa Maximum Noise Intensity: -60db Dimensions: 35 X 20 X 35cm Weight：9kg Notes This Product Should Work with Good Power Supply Cable.
0 bids Free Shipping
Condition: New Location: Fontana, United States
ETERFANT Dental Marathon Electric Micro Motor Polisher Micromotor N3 S05 0-35K. - Regularly sterilize the polisher to maintain hygiene and prevent infection. Ideal for use in dental laboratories and dental clinics.
0 bids Free Shipping
Condition: New Location: Walnut, United States
And it is applied to cutting, grinding, polishing. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc.
0 bids Free Shipping
Condition: New Location: , China
Autoclave Sterilizer. Dental Handpiece. Dental Surgical Light. Dental X Rays. Portable Dental Unit. High temperature could kill 99.9% bacteria. 200 Celsius degree temperature sterilizer(392 fahrenheit).
0 bids $19.90 Shipping
Condition: New Location: , China
Electric Waxer Carving Pen dental, jewelry jewelry trade, industry and other industries die carving industry (production) wax. Electric Current: 0.1A.
0 bids Free Shipping
Condition: New Location: Chino, United States
Weights&Dimensions Weight: 6kg Forming size:126*126mm Dimensions: 25 × 21 × 30cm Specifications Model: JT-018 Voltage: 110V/60Hz ± 10% Motor Power: 800W Heating Power: 600W What's Included? Main unit(Vacuum forming machine) x 1 1x Bag of steel grits Power cord x 1 Manual x 1.
Buy It Now
$26.01 Shipping
Condition: New Location: Chino, United States
Specification Model: ZY-260 Color: Silver Material: 304 Stainless Steel Working Medium: Steam Voltage: 110V (AC) Power: 1.2KW Frequency: 50HZ Capacity: 8L/ 2.11Gal/ 8.5Qt Volume: 0.010m³/ 0.353ft³ Design Pressure: 0.17MPa Design Temperature: 129℃/ 264.2℉ Over-pressure Self-discharge: 0.145-0.165Mpa Maximum Operating Temperature: 126-128℃/ 258.8-262.4℉ Sterilization Chamber Dimensions: 24*12cm/ 9.45*4.72in Product Size: 33*33*26cm/ 12.9*12.9*10in Package Size: 36*36*30cm/ 14.17*14.17*11.81in Net Weight: 6.5kg/ 14lbs Gross Weight: 8kg/ 17.64lbs Package Included 1* Autoclave 1* Pot Lid 1* Sterilized Inner Cylinder 1* Wing Wrench 1* English Instruction Manual.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Investment Vibrator 4" Round Shaker Oscillator Dental Lab Equipment USA This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications Voltage: 110v/60Hz ±10% Power: 100W Dimensions: 14x15x11cm Statement (FDA, ARTG) The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. If you have questions about legal obligations regarding sales of med.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids $10.00 Shipping
Condition: New Location: Chino, United States
Polishing Lathe Machine Bench Buffing Grinder Dental Lab High Speed Polisher. Polisher Polishing Machine Dental Lab Lathe Bench Buffing Grinder Jewelry 110V. The Polishing Lathe is for polishing and burnishing casting.
Buy It Now
$10.00 Shipping
Condition: New Location: , United States
Speed: 3000rpm. Build to Last: This Product Is Mainly Made of High-quality Cast Iron, Glass, and Abs. Process: Polishing, High-temperature Quenching. Number of Polishing Positions: 2. 1 Polishing Machine.
|
|
|
|