|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
0 bids Free Shipping
Condition: New Location: , United States
Features: Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg The package includes: 1X heater 1X hot press 1X picking stick 1X small top bar 1X Big Top Bar 1X Type Box 1X box wrench 1X power cord 1Xproduct brochure.
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: La Puente, United States
A Good Tool Is Indispensable for Tedious Vibration Work. Our Dental Square Quartet Vibrator Is Mainly Made of Various High-quality Materials and Adopts a Painting Process to Ensure That You Can Use It for a Long Time. Good Performance(120w) Can Make Your Vibration Work More Efficient. It Will Be a Good Helper in Your Work.
0 bids Free Shipping
Condition: New Location: , United States
Dental plaster Model Arch Trimmer Trimming Machine Dental Lab Equipment 2800rpm Features: This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Specification: Power Supply:110V 60Hz(US PLUG) Power Consumption:250W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg Package Including: Dental Model Arch Trimmer Machine: 1 set.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
A Good Tool Is Indispensable for Tedious Vibration Work. Our Dental Square Quartet Vibrator Is Mainly Made of Various High-quality Materials and Adopts a Painting Process to Ensure That You Can Use It for a Long Time. Good Performance(120w) Can Make Your Vibration Work More Efficient. It Will Be a Good Helper in Your Work.
0 bids Free Shipping
Condition: New Location: , United States
Weights&Dimensions Weight: 6kg Forming size:126*126mm Dimensions: 25 × 21 × 30cm Specifications Model: JT-018 Voltage: 110V/60Hz ± 10% Motor Power: 800W Heating Power: 600W What's Included? Main unit(Vacuum forming machine) x 1 1x Bag of steel grits Power cord x 1 Manual x 1.
0 bids Free Shipping
Condition: New Location: , United States
Dental plaster Model Arch Trimmer Trimming Machine Dental Lab Equipment 2800rpm Features: This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Specification: Power Supply:110V 60Hz(US PLUG) Power Consumption:250W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg Package Including: Dental Model Arch Trimmer Machine: 1 set.
0 bids Free Shipping
Condition: New Location: , United States
Weights&Dimensions Weight: 6kg Forming size:126*126mm Dimensions: 25 × 21 × 30cm Specifications Model: JT-018 Voltage: 110V/60Hz ± 10% Motor Power: 800W Heating Power: 600W What's Included? Main unit(Vacuum forming machine) x 1 1x Bag of steel grits Power cord x 1 Manual x 1.
0 bids Free Shipping
Condition: New Location: , United States
Main unit 1. FDA declaration .
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
FEATURES: 1. Professional in dipping the wax 2. There is a effictive temperature-fixed adjustment,can set the temperature+/-℃ 3. Good at heat conduction and insulation 4. Easy to operate and use 5. Melting the wax quickly and keep them in liquid status 6. Equipped digital CPU circuit and set/keep temperature needed 7. Easy to compare pre-set temperature and current temperature 8. LED display heating automatically,LED will shut off when arrving temperature set 9. Easily recognize the specially situation becase of accurate temperature sensor.
Buy It Now
Free Shipping
Condition: New Location: , United States
1 Plaster filter. you should consult with the FDA's Center for Devices and Radiological Health state and local regulatory agencies. If the item is subject to FDA regulation. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and.
0 bids Free Shipping
Condition: New Location: Chino, United States
Welcom to yanqiuwangluo66.
0 bids Free Shipping
Condition: New Location: Fontana, United States
And Drug Administration and state and local regulatory agencies. Working Pressure For High Speed Hand Piece: 0.36Mpa. Working Pressure For Low Speed Hand Piece: 0.34Mpa. Start-up Pressure: 0.5Mpa. Max Pressure: 0.8Mpa.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
$5.00 Shipping
Condition: New Location: Chino, United States
Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity. Cut off the power when finish. Wash the surface of the machine frequently to keep clean, so as to extend the service life.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Color: Blue Material: Aluminum, Stainless Steel Process: Painting Plug Type: US Standard Voltage: 110V, 60Hz ±10% Power: 1000W Heating Power: 600W Molding Power: 800W Power Cord Length: 1.2-1.5m/3.94-4.92ft Molding Size: 110*110mm/4.33*4.33in Product Size: 25*21*30cm/9.84*8.27*11.81in Package Size: 30*25*21cm/11.81*9.84*8.27in Gross Weight: 6kg/13.28 lbs Net Weight: 6kg/13.28 lbs Package Included 1* Forming Machine Notes 1.Please note that this product does not include diaphragms. 2.Please note that after using the machine, do not forget to turn off the heating switch, otherwise, it may burn out the heater. 3.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before o.
Buy It Now
Free Shipping
Condition: New Location: Bensenville, United States
Check item specifics and photos to ensure you make the perfect choice.
Buy It Now
Free Shipping
Condition: New Location: , United States
High Security: The reinforced power cord interface is durable and safe. And it has an anti-dry burning function. Open the lid of the autoclave, take out the sterilized inner cylinder in the autoclave, and pour more than 3.5L/0.925Gal of water into the electric heating tube.
0 bids Free Shipping
Condition: New Location: , United States
Dental Vacuum Forming Machine,Compatible with all dental thermoplastics. 1 x Vacuum forming machine. HOW TO USE Dental Vacuum Forming Machine. Temporary, permanent base, dental care of the molding and production.
0 bids $10.00 Shipping
Condition: New Location: , China
Three Teflon coated non-stick reservoirs. Dental wax pot up to high heat to the wax carver quickly and it is safe and efficient to use. Indicator light that goes off when unit reaches desired temperature.
0 bids $30.00 Shipping
Condition: New Location: , China
Dental 35K r/m Marathon Micromotore Micromotor ODONTOTECNICO Polisher Handpiece 110V. micromotor handpiece. Foot ON/OFF switch system.
0 bids Free Shipping
Condition: New Location: Chino, United States
This is a very well made flask for Dental Lab Press. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids Free Shipping
Condition: New Location: Chino, United States
Don't miss out on this top-of-the-line tool for dental professionals. 10X Dental Teeth Adjustable Small Articulator for dental Lab Dentist. Portable Bluetooth Tattoo Stencil Printer - FDA Approved A4 B5 - Create Pro.
0 bids $2.99 Shipping
Condition: New Location: , China
You can securely mount and remove any size full model casts. 1 Pc Main unit. High-quality articulators securely holds full models and Lightweight. Get from the factory directly.
Buy It Now
$8.00 Shipping
Condition: New Location: Chino, United States
High Security: The reinforced power cord interface is durable and safe. And it has an anti-dry burning function. Open the lid of the autoclave, take out the sterilized inner cylinder in the autoclave, and pour more than 3.5L/0.925Gal of water into the electric heating tube.
0 bids $21.00 Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Color: Blue Material: Aluminum, Stainless Steel Process: Painting Plug Type: US Standard Voltage: 110V, 60Hz ±10% Power: 1000W Heating Power: 600W Molding Power: 800W Power Cord Length: 1.2-1.5m/3.94-4.92ft Molding Size: 110*110mm/4.33*4.33in Product Size: 25*21*30cm/9.84*8.27*11.81in Package Size: 30*25*21cm/11.81*9.84*8.27in Gross Weight: 6kg/13.28 lbs Net Weight: 6kg/13.28 lbs Package Included 1* Forming Machine Notes 1.Please note that this product does not include diaphragms. 2.Please note that after using the machine, do not forget to turn off the heating switch, otherwise, it may burn out the heater. 3.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before o.
0 bids Free Shipping
Condition: New Location: Newark, United States
This duplicating machine is designed specifically for dental laboratories and is intended for use in the field of dentistry. With its powerful 800W motor, this machine efficiently mixes and stirs agar gel to create accurate and detailed dental impressions.
0 bids Free Shipping
Condition: New Location: Los Angeles, United States
Barrier film is the ideal solution for protecting hard-to-reach and difficult-to-clean areas. The film is like a thick plastic wrap (similar to what you protect food with). However, barrier film is made with a self-adhesive back, so it it sticky enough to adhere to any surface in the office.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: Used Location: Shippensburg, United States
This dental vacuum forming molding machine is a reliable and efficient tool for dental laboratories, endodontics, and dentistry. It is compatible with all dental thermoplastics and has a dimensions of 25 × 21 × 30cm, making it a compact unit for easy storage. The machine has a weight of 6kg and a voltage of 110V/60Hz ± 10%.
0 bids $0.99 Shipping
Condition: New Location: Woodbridge, United States
High Degree of Precision and Flexibility while conducting the Clinical Procedure. PREMIUM O.R GRADE QUALITY STAINLESS STEEL. Manufactured from AISI 420 Stainless steel. High Grade finish for aesthetic and corrosion resistance.
0 bids Free Shipping
Condition: New Location: , United States
High Security: The reinforced power cord interface is durable and safe. And it has an anti-dry burning function. Open the lid of the autoclave, take out the sterilized inner cylinder in the autoclave, and pour more than 3.5L/0.925Gal of water into the electric heating tube.
0 bids $9.99 Shipping
Condition: New Location: , China
New Dental Lab Dust Collector Vacuum Cleaner. The Dust Collector is a vacuum device, it is used with sandblasters,polishing machines and laboratory tables for dust collecting. very strong vacuum power.
0 bids Free Shipping
Condition: New Location: Chino, United States
Welcom to yanqiuwangluo66.
0 bids $8.00 Shipping
Condition: New Location: La Puente, United States
Product Description: ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. . ★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time. ★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists. ★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
$385.00 Shipping
Condition: New Location: , China
Even heating: Imported heater, heating evenly, no local overshoot on the inner edge of the barrel. Timing function: start the timing after get off work, you can use it when you go to work, no need to stir all night, save electricity costs, and protect the service life of the agar.
0 bids Free Shipping
Condition: New Location: Los Angeles, United States
Perfect for dental practices that emphasize cleanliness and quality. With a count of 500 per box, you're equipped for multiple uses, prioritizing both patient safety and device longevity. Made from durable, tear-resistant material, these sleeves are designed to minimize the risk of contamination while ensuring clear, unhindered X-ray results.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Lab Digital Single-Row Dust Collector Vacuum Cleaner 370W for Laboratory. Power: 370W. cushions for making the suction inlet near. The suction hose is. This compact desk-top portable suction base brings a substantive.
Buy It Now
Free Shipping
Condition: New Location: , United States
4" Round Vibrador Dental Lab Investment VibratorOscillator Variable Speed 110V Dental 4" Round Vibrator, Variable Speed Vibrator, variable-intensity model vibrator, 4" Round Lab Shaker Oscillator, Lab Shaking Vibrator, Lab mixing plaster/gypsum, pouring models, and investing Vibrator This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
0 bids $9.99 Shipping
Condition: New Location: Chino, United States
Remarks: Before operation this therapeutic device need to connect with oil free compressor. Clean water bottle 600ML. 1 set. Saliva ejector. 1 set. 3-way air/water syringe. 1 set. High speed air turbine Handpiece tube. 1 set.
0 bids Free Shipping
Condition: New Location: New York, United States
Dental Kit for Basal/Cortical Fixtures. X1 Dental Kit for Basal/Cortical Fixtures. Kit Contains 1x GDT Hex Driver Ø1.25mm - 25.0mm. We will do Our best to make you 100% satisfied. 1x GDT DLC Pilot Step Drill 16mm - Ø2.0mm.
Buy It Now
$12.00 Shipping
Condition: New Location: Chino, United States
Description: • This is a big power, high efficiency vibrator, the unique design of heat radiation base make it always work in long time. • It has two grades, weak grade, strong grade, can be changed as necessary. • Before power on, put the switch in the middle part “O”, and then power on, turn on the switch (the indicator light comes on), and choose the strong grade or weak grade, finally turn on the switch two or switch one, it starts to work. Package Including: 1x New JT-51B Small Square Dental Vibrator.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Lab Square Vibrator Vibration Model Oscillator Equipment 120w 110v This Is a Big Power, High Efficiency Vibrator, the Unique Design of Heat Radiation Base Make It Always Work in Long Time. It Has Two Grades, Weak Grade, Strong Grade, Can Be Changed As Necessary. Before Power on, Put the Switch in the Middle Part “O”, and Then Power on, Turn on the Switch (the Indicator Light Comes on), and Choose the Strong Grade or Weak Grade, Finally Turn on the Switch Two or Switch One, It Starts to Work. Features: Voltage: 110v/60hz+-10% Power: 120w Maximum Load:<=2kg Dimension:20.5×15.5×10cm (Inner Packing Size) Package Including: 1x New Jt-51b Small Square Dental Vibrator.
0 bids Free Shipping
Condition: New Location: Chino, United States
Sealing machine ( SEAL 80) Parameters: Voltage : AC110V/50Hz, Power : 500W Sealing width : 250mm (Max.) Press Width : 10mm External dimension: 420*300*185mm. Net weight : 5 kg Feature: All plastic shell Fashionable design,safety of insulation is good Convenient for changing the knife blade External standard surgical knife blade, easy to get.
Buy It Now
Free Shipping
Condition: New Location: , United States
0 bids $2.99 Shipping
Condition: New Location: , China
Made of high quality quartz. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids Free Shipping
Condition: New Location: Gresham, United States
The electric motor matches the "E"type international interfaceIt can be matched with 1:5,1:1,16:1 internal waterway handpiece. Dental LED Electric Motor Minimally invasive repair,polishing,pulp preparation hole,etc.
Buy It Now
$9.48 Shipping
Condition: New Location: 青浦区, China
Sales Policy. Our service team is willing to solve the problem for you.
0 bids Free Shipping
Condition: New Location: Fort Lauderdale, United States
Premium Grade Stainless Steel. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Choose The Deal and Compare Prices.
0 bids Free Shipping
Condition: Used Location: Sandy, United States
BienAir S001 trimmer
0 bids $2.99 Shipping
Condition: New Location: , China
Red modeling wax X 20 pcs (1 Box). Red modeling wax for prosthetic dentistry tough,no distortion ,runniness or droplet. overall well balanced composition makes it easy to work with. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg The package includes: 1X heater 1X hot press 1X picking stick 1X small top bar 1X Big Top Bar 1X Type Box 1X box wrench 1X power cord 1Xproduct brochure.
Buy It Now
$54.48 Shipping
Condition: New Location: , China
Power: 100W. Motor revolutions: 5500 revolutions per minute.
0 bids Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
|
|
|
|