|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: , United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental electric Micromotor Motor Polishing Handpiece 35K RPM Introduction: Micro motor DENTAL Handpiece is an instrument made with motor and used for working with the turning force from the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc. Feature: 1. Portable Design-it is very convenient to use and take Installed special ball bearings for super high speed (So do not need add oil) 2.35,000 RPM's provides higher speeds, greater torque 3. Newly designed front nose.
Buy It Now
$5.00 Shipping
Condition: New Location: Chino, United States
★ the Denture Injection Unit Consists of a Heater and a Hot Press. TypeDental Lab Flexible Denture Machine. Press Dentistry Injection System 400W 110V 282-288 ° C. 3 the Heater Will Beep When It Is Heated.
Buy It Now
$38.00 Shipping
Condition: New Location: Chino, United States
Polisher Polishing Machine Dental Lab Lathe Bench Buffing Grinder Jewelry 110V. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation.
Buy It Now
$2.99 Shipping
Condition: New Location: , China
This product is used in the photocuring model of the light curing machine. We strive to exceed all your expectations and put a smile on your face. Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item.
Buy It Now
Free Shipping
Condition: New – Open box Location: , United States
The vibrator is mainly composed of pedestal and vibrator plate. It is also installed the knot for adjusting the intensity of the vibration. 1 x New JT-51B X Small Square Dental Vibrator. Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity.
Buy It Now
Free Shipping
Condition: New Location: South El Monte, United States
Also used for cutting excessive wax. Quantity: 1pc. Full Autoclavable / Reusable. Product Conforms to ISO 9001, CE, ISO 13485, and other Quality Standards. City,State:Huanghua City，Hebei Province，China.
0 bids Free Shipping
Condition: New Location: Perth Amboy, United States
Two locking casters provide stability on uneven surfaces. The wide handle ensures a comfortable grip for easy maneuvering. It's solidly built, neat, well-made, and without scratches on its mirror surface.
Buy It Now
$19.13 Shipping
Condition: New Location: Chino, United States
Polisher Polishing Machine Dental Lab Lathe Bench Buffing Grinder Jewelry 110V. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation.
0 bids $2.99 Shipping
Condition: New Location: , China
Denture Articulator Japaness Precision Style. Japaness Precision Style Denture Articulator for Teeth. Dental Lab Japaness Precision Style Articulator.
Buy It Now
$10.00 Shipping
Condition: New Location: , United States
Package Included 1* Autoclave 1* Pot Lid 1* Sterilized Inner Cylinder 1* Wing Wrench 1* English Instruction Manual.
0 bids $300.00 Shipping
Condition: New Location: , United States
Connect steam exhaust pipe with the steam vent，Before operation. Sterilization tray × 3pcs ; steam exhaust pipe × 1pc. Before open the DOOR(Do not close the power switch and close the steam. Avoild overheat protect device: when inter temperature overheat, power break electric current automatically. ).
Buy It Now
Free Shipping
Condition: New Location: , United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental electric Micromotor Motor Polishing Handpiece 35K RPM Introduction: Micro motor DENTAL Handpiece is an instrument made with motor and used for working with the turning force from the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc. Feature: 1. Portable Design-it is very convenient to use and take Installed special ball bearings for super high speed (So do not need add oil) 2.35,000 RPM's provides higher speeds, greater torque 3. Newly designed front nose.
0 bids Free Shipping
Condition: New Location: Chino, United States
★ the Denture Injection Unit Consists of a Heater and a Hot Press. 3 the Heater Will Beep When It Is Heated. 1x Hot Press. 2 the Function of the Hot Press Is to Inject Molten Material into a Previously Prepared Flask.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
0 bids Free Shipping
Condition: New Location: , United States
Main unit 1. Specifications ：. FDA declaration .
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , United States
Dental Vacuum Forming Machine,Compatible with all dental thermoplastics. 1 x Vacuum forming machine. HOW TO USE Dental Vacuum Forming Machine. Temporary, permanent base, dental care of the molding and production.
0 bids Free Shipping
Condition: New Location: Cranbury, United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle. Fully adjustable.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Power: 180W. Dental Polishing and Grinding Box 1 Accessory Kit 1. Max vacuum: -8.8Kpa. - The baffle plate is made of tempered glass, which prevents the spread of dust during the sandblasting process and reduces the harm of dust to human body;.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental plaster Model Arch Trimmer Trimming Machine Dental Lab Equipment 2800rpm Features: This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Specification: Power Supply:110V 60Hz(US PLUG) Power Consumption:250W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg Package Including: Dental Model Arch Trimmer Machine: 1 set.
0 bids Free Shipping
Condition: New Location: Ontario, United States
Designed for mounting pre-cast dental models. Size: 14.6 15 10.3cm. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: , China
Lab Grinding Machine for Jewelry Polisher / Dental Lab, multi use mini lathe. Polisher is aluminm motor with 1400/2800 rpm with high torque and speed ,s upport continuous work silently. Lather Polishing Machine |Two Axle Clamp | 1x Dust Drawer.
0 bids Free Shipping
Condition: New Location: Chino, United States
Power: 120W. 1x New JT-51BX Small Square Dental Vibrator. you should consult with the FDA's Center for Devices and Radiological Health The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and.
Buy It Now
Free Shipping
Condition: New Location: Fullerton, United States
All of the components installed in the central PC board concentrated. Shock,set-up, electron tubes, all of them are insulation vacuum, sealed stereotype protection. This portable dental X-ray machine is high frequency machine.
0 bids Free Shipping
Condition: Used Location: Fort Myers, United States
The Next Dent 3D printer is a high-quality dental lab equipment designed specifically for dental laboratories and dentistry. With its reliable brand, Next Dent, this 3D printer provides precise and efficient printing solutions for creating detailed and accurate dental models. Perfect for professionals in the healthcare, lab, and dental industry, this printer offers cutting-edge technology to enhance productivity and clinical outcomes.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Gresham, United States
And it is applied to cutting, grinding, polishing. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc.
0 bids $49.90 Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: , United States
Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity. Cut off the power when finish. Wash the surface of the machine frequently to keep clean, so as to extend the service life.
Buy It Now
Free Shipping
Condition: New Location: Fullerton, United States
(With 16:1 electric contra angle(1:1/10:1/16:1/20:1 contra angle can be compatible for wide clinical application). Root Canal Host 1PC. e) Buzzer alert: The buzzer will alert when the file is less than 2mm closed to the apex.
Buy It Now
Free Shipping
Condition: New Location: , United States
Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity. Cut off the power when finish. Wash the surface of the machine frequently to keep clean, so as to extend the service life.
Buy It Now
Free Shipping
Condition: New Location: Hayward, United States
Manufactured From AISI 304 German Stainless Steel. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Product Name：Dental Amalgamator Models: IMIX-M3, IMIX-M6 Shell Material: Plastic Power: According to the Nameplate Motor Power: 35W Storage Conditions: -10∽40℃, Relative Humidity≤80%, No Corrosive Gas and Ventilated Places. Warranty: 1 year Package Included 1* Dental Amalgamator 4* Springs 2* Fusing core 0.5A Ф5X20 1* English Instruction 1* Warranty Card.
0 bids $7.00 Shipping
Condition: New Location: , United States
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. City: Beijing ?. 1 Duplicating?Flasks?.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
A variety of functions are integrated, with cutting, grinding and polishing functions. Start and close through the switch, simple operation, easy to use. When the special fixture spindle is in the rotating state, the installation and removal of the grinding tool clamp can be carried out by rotating the clutch handle.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
High Security: The reinforced power cord interface is durable and safe. And it has an anti-dry burning function. Open the lid of the autoclave, take out the sterilized inner cylinder in the autoclave, and pour more than 3.5L/0.925Gal of water into the electric heating tube.
Buy It Now
$15.00 Shipping
Condition: New Location: Chino, United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
0 bids Free Shipping
Condition: New Location: Chino, United States
Technical Data: Model JT-018 Forming size 126*126mm Voltage 110V/60Hz ± 10% Motor Power 800W Heating Power 600W Dimensions 25 × 21 × 30cm Weight 6kg Packing: Main unit(Vacuum forming machine) *1 Bag of steel grits *1 Power cord * 1 Manual * 1 Application Range: 1. Decolorization braces forming and production 2. Orthodontic appliances remain, arch molding and plywood production 3. Periodontal disease, fluoride treatment and production of the molding tray. 4. Temporary, permanent base, dental care of the molding and production.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental visualizer JT-10. Dental Lab Surveyor. 10X Dental Teeth Adjustable Small Articulator for dental Lab Dentist. Dental LED Curing Light Lamp Wireless Cordless Resin Cure 5W 1500MW FDA. Professional Dental Magnetic Articulator for Lab Work and Patient Care.
0 bids Free Shipping
Condition: New Location: Fullerton, United States
Dental Electric Micromotor polisher motor Unit N3. 1 x SHIYANG Micro motor N3 S05. 1 x Handpiece Suppor. This product does not contain the handpiece! E-Type Motor Connection to your straight & Contra Angle Handpiece.
0 bids Free Shipping
Condition: New Location: , United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Sand Blasting Machine 1 Foot Switch 1. - The sealant used on the machine is used for car windows,The seal is very good. - There is a transparent high-strength tempered glass on the top of the machine, and the processing inside can be clearly observed.
0 bids $59.00 Shipping
Condition: New Location: Rancho Cucamonga, United States
Easy Swivel casters for easy transport. Sturdy steel construction. Body: Steel. Hope for your understanding. Simple and durable.
0 bids Free Shipping
Condition: New Location: , United States
Perfect For Dental Hospital, Dental Clinics, Army and. Compact structure consistent with doctor's habits to. Oil free motor without any lubricated oil, drainage bottle. Complete Function: The unit consists of related operation.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
1 Plaster filter. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and. Material: Polypropylene. Color: gray.
0 bids Free Shipping
Condition: Used Location: Nogales, United States
The Sirona CEREC MC XL Dental Milling Machine is a high-quality dental equipment designed for use in dental laboratories. This milling machine is perfect for creating precise and efficient dental restorations, with the ability to mill both crowns and prosthetics. With its advanced technology and trusted brand name, this dental milling machine is a valuable asset for any dental laboratory looking to enhance their workflow and achieve superior results. this model is one of the newer models. if you have any questions please contact me through ebay.
Buy It Now
Free Shipping
Condition: New Location: Fullerton, United States
14L TR250E. Sterilizer temperature ： 121 ℃. Tank capacity: 18L. Sterilization is working. Sterilizer temperature/pressure ： 121 ℃ /0.12Mpa; 134 ℃ /0.22Mpa. We're one of the largest online dental suppliers based on many qualified manufacturers in china.
0 bids Free Shipping
Condition: New Location: , United States
This injection system is composed of a heater and a hot press. The heater will make a beep sound when it finishes heating. Structure and working principle The function of the hot press is that it injects the molten material into flask.
Buy It Now
$8.25 Shipping
Condition: New Location: Monroe Township, United States
Thanks a lot for your choosing our products, please look at the PRODUCT INSTRUCTION before using. Our MODEAL VIBRATOR is for making plaster model in the mechanic chamber of the oral section. 1.Basic Structure The vibrator is mainly composed of pedestal and vibrator plate. It is also installed the knot for adjusting the intensity of the vibration. 2.Operation Steps After connecting the power, put the plastic model on the plate, and turn on the adjusting knob. Clockwise direction is to increase the intensity of vibration. Counterclockwise is to reduce the intensity of vibration. Turn off the knob to stop the vibration after the model finishes vibration processing. Then take it off for use. 3.Notices Guarantee the ground line of the power is working. While vibrating, do not a.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental 4" Round Vibrator Laboratory Equipment Oscillator Mixing Plaster Shaker 4" Dental Round Vibrator Shaker Oscillator variable-intensity model vibrator lab Dental 4" Round Vibrator, Variable Speed Vibrator, variable-intensity model vibrator, 4" Round Lab Shaker Oscillator, Lab Shaking Vibrator, Lab mixing plaster/gypsum, pouring models, and investing Vibrator This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm .
Buy It Now
Free Shipping
Condition: New Location: Fontana, United States
Ultra Silent Operation: Operates at just 60 dB, suitable for a quiet dental workspace. - Premium Materials: High-quality brass with nickel plating for corrosion-resistant valves, and pure copper coils for efficient heat dissipation and longer life.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
$8.00 Shipping
Condition: New Location: La Puente, United States
Product Description: ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. . ★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time. ★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists. ★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded.
|
|
|
|