|
|
Order by: |
Buy It Now
$39.31 Shipping
Condition: New Location: Chino, United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
$49.90 Shipping
Condition: New Location: , United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Color: Blue Material: Aluminum, Stainless Steel Process: Painting Plug Type: US Standard Voltage: 110V, 60Hz ±10% Power: 1000W Heating Power: 600W Molding Power: 800W Power Cord Length: 1.2-1.5m/3.94-4.92ft Molding Size: 110*110mm/4.33*4.33in Product Size: 25*21*30cm/9.84*8.27*11.81in Package Size: 30*25*21cm/11.81*9.84*8.27in Gross Weight: 6kg/13.28 lbs Net Weight: 6kg/13.28 lbs Package Included 1* Forming Machine Notes Please note that this product does not include diaphragms. Please note that after using the machine, do not forget to turn off the heating switch, otherwise, it may burn out the heater.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: , United States
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. air/water?. FDA Declaration 1 main body.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
[Best Tools]--This is a big power, high efficiency vibrator,Quiet, powerful, and highly durable, this is the perfect tool for anyone! [Superior quality] --The device is entirely made of metal.The unique design of heat radiation base make it always work in long time. [The strength is adjustable]--It has two grades, weak grade, strong grade, can be changed as necessary. [How to use]--Before power on, put the switch in the middle part , and then power on, turn on the switch (the indicator light comes on), and choose the strong grade or weak grade, finally turn on the switch two or switch one, it starts to work. [Application]--This variable-intensity model vibrator is ideal for mixing plaster gypsum, pouring models, and investing.It is good used for reducing bubbles, ensuring the flawless.
0 bids Free Shipping
Condition: New Location: Chino, United States
Don't miss out on this top-of-the-line tool for dental professionals. 10X Dental Teeth Adjustable Small Articulator for dental Lab Dentist. Portable Bluetooth Tattoo Stencil Printer - FDA Approved A4 B5 - Create Pro.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Hialeah, United States
Dental Waxing Unit Analog Heater Dipping Wax Pot & Carving Knife Pen JT-50. Exceptions are stated below. PRIVACY AND PROTECTION OF PERSONAL INFORMATION Your privacy is important to us. They are required to maintain the confidentiality of the information and are prohibited from using that information for any other purpose.
0 bids Free Shipping
Condition: New Location: , United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle.
Buy It Now
$48.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: , United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
0 bids $10.00 Shipping
Condition: New Location: , China
MARATHON, SHIYANG micro motor dental Handpiece. push button contra angle handpiece. Shank materials: steel.
Buy It Now
$5.99 Shipping
Condition: New Location: , China
Model:Large/Small
0 bids Free Shipping
Condition: New Location: , United States
Input power: 370W. Assist very well during dental unit's suction failure or insufficiency. Comfortably located next to dental chair. Anti-vibration system and silencer for the exhauster air and non stop suction motor's noise.
0 bids Free Shipping
Condition: New Location: Fontana, United States
ETERFANT Dental Agar Duplicating Mixer Hydrocolloid Mixing Heating Machine Automatic Dental Lab Gel Mixer Stirrer. - If the pot contains frozen solid agar, do not attempt to stir it directly. - When the machine is working, the agar added in the pot should not be less than 2kg.
0 bids Free Shipping
Condition: New Location: , United States
Sterilizer temperature：121℃. Sterilization is working. Material：Stainless steel #304. Wait for the pressure gauge pointer to zero, opened the door cover. Owner/Operator Number: 10058910. Regulation Number: 872.5410.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Vacuum Forming Machine is specially designed for dental applications. Durable and user-friendly, our Vacuum Forming Machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office.
0 bids Free Shipping
Condition: New Location: Chino, United States
Sealing machine ( SEAL 80) Parameters: Voltage : AC110V/50Hz, Power : 500W Sealing width : 250mm (Max.) Press Width : 10mm External dimension: 420*300*185mm. Net weight : 5 kg Feature: All plastic shell Fashionable design,safety of insulation is good Convenient for changing the knife blade External standard surgical knife blade, easy to get.
Buy It Now
$19.13 Shipping
Condition: New Location: Chino, United States
Polisher Polishing Machine Dental Lab Lathe Bench Buffing Grinder Jewelry 110V. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation.
Buy It Now
Free Shipping
Condition: New – Open box Location: Wilmington, United States
Experience precision and reliability with the Eppendorf Safe-Lock DNA Grade Tubes. Designed for forensic DNA applications, the 2.0 mL capacity PCR Tube is a must-have tool for professionals seeking accuracy in their lab techniques. Each pack contains 50 units, ensuring a substantial supply for your laboratory needs. The model 0030123620 is crafted by Eppendorf, a brand synonymous with quality and durability in scientific equipment. The tubes are engineered to meet the stringent requirements of DNA grade work, making them ideal for a range of molecular biology and biotechnology applications. Trust in the precision of Eppendorf to advance your research and analysis with confidence.
0 bids Free Shipping
Condition: New Location: Walnut, United States
And it is applied to cutting, grinding, polishing. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc.
Buy It Now
$18.45 Shipping
Condition: New Location: Chino, United States
4)Weights&Dimensions Weight: 6kg Forming size:126*126mm Dimensions: 25 × 21 × 30cm 5)Specifications Model: JT-018 Voltage: 110V/60Hz ± 10% Motor Power: 800W Heating Power: 600W.
0 bids Free Shipping
Condition: New Location: , United States
Features: Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg The package includes: 1X heater 1X hot press 1X picking stick 1X small top bar 1X Big Top Bar 1X Type Box 1X box wrench 1X power cord 1Xproduct brochure.
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: , United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
FEATURES: 1. Professional in dipping the wax 2. There is a effictive temperature-fixed adjustment,can set the temperature+/-℃ 3. Good at heat conduction and insulation 4. Easy to operate and use 5. Melting the wax quickly and keep them in liquid status 6. Equipped digital CPU circuit and set/keep temperature needed 7. Easy to compare pre-set temperature and current temperature 8. LED display heating automatically,LED will shut off when arrving temperature set 9. Easily recognize the specially situation becase of accurate temperature sensor.
0 bids Free Shipping
Condition: New Location: Fullerton, United States
Sterilizer temperature/pressure：121℃/0.12Mpa; 134℃/0.22Mpa. Connect steam exhaust pipe with the steam vent，before operation. Avoid overheat protect device: when inter temperature overheat, power break electric current automatically.
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
Also, the stainless steel drawer slides smoothly with the handle. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. Features & Details.
Buy It Now
Free Shipping
Condition: New Location: , United States
Quiet, powerful, and highly durable, this is the perfect tool for any dentist! Your satis faction is our ultimate goal. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and.
0 bids $5.18 Shipping
Condition: Brand New Location: Parramatta, AU
X1. Orthodontic Adam Plier TC.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
$48.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Power: 25W. Sand Blasting Machine 1 Foot Switch 1. - The sealant used on the machine is used for car windows,The seal is very good. - There is a transparent high-strength tempered glass on the top of the machine, and the processing inside can be clearly observed.
Buy It Now
$12.00 Shipping
Condition: New Location: Monroe Township, United States
Dental Square Vibrator Model Vibration Oscillator Platform Vibrating Equipment Description: • This is a big power, high efficiency vibrator, the unique design of heat radiation base make it always work in long time. • It has two grades, weak grade, strong grade, can be changed as necessary. • Before power on, put the switch in the middle part “O”, and then power on, turn on the switch (the indicator light comes on), and choose the strong grade or weak grade, finally turn on the switch two or switch one, it starts to work. Features: Voltage: 110V/60Hz+-10% Power: 120W Maximum load:<=2KG Dimension:20.5×15.5×10cm (Inner packing size) Package Including: 1X New JT-51B Small Square Dental Vibrator.
0 bids Free Shipping
Condition: New Location: Chino, United States
Thanks a lot for your choosing our products, please look at the PRODUCT INSTRUCTION before using. Our MODEAL VIBRATOR is for making plaster model in the mechanic chamber of the oral section. 1.Basic Structure The vibrator is mainly composed of pedestal and vibrator plate. It is also installed the knot for adjusting the intensity of the vibration. 2.Operation Steps After connecting the power, put the plastic model on the plate, and turn on the adjusting knob. Clockwise direction is to increase the intensity of vibration. Counterclockwise is to reduce the intensity of vibration. Turn off the knob to stop the vibration after the model finishes vibration processing. Then take it off for use. 3.Notices Guarantee the ground line of the power is working. While vibrating, do not a.
Buy It Now
Free Shipping
Condition: New Location: Chantilly, United States
Explore our extensive catalog, experience the difference in quality, and let us contribute to the success of your dental practice. RMH3 Dental. This is an imaginative constructure and ingenious two-in-one Multifunction Waxing Unit.
0 bids $5.50 Shipping
Condition: New Location: , China
Due to the difference in lighting and screen settings, the color of the product may be slightly different from the picture. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
$2.99 Shipping
Condition: New Location: , China
Material :Rubber. Color: Blue. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Application Range 1. Decolorization braces forming and production 2. Orthodontic appliances remain, arch molding and plywood production 3. Periodontal disease, fluoride treatment and production of the molding tray4. Temporary, permanent base, dental care of the molding and production Weights&Dimensions Weight: 6kg Forming size:126*126mm Dimensions: 25 × 21 × 30cm Specifications Model: JT-018 Voltage: 110V/60Hz ± 10% Motor Power: 800W Heating Power: 600W Specifications: Voltage 110V/60Hz ±10% Power 100W Dimensions 14x15x11cm.
0 bids $2.99 Shipping
Condition: New Location: , China
Capacity: 600ml. Can be used in most dental systems, suitable for dental chairs to use. High water resistance water bottle, compatible with coolant liquid for dental use. Item Type: Dental Water Bottle.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental electric Micromotor Motor Polishing Handpiece 35K RPM Introduction: Micro motor DENTAL Handpiece is an instrument made with motor and used for working with the turning force from the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc. Feature: 1. Portable Design-it is very convenient to use and take Installed special ball bearings for super high speed (So do not need add oil) 2.35,000 RPM's provides higher speeds, greater torque 3. Newly designed front nose.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Quiet, powerful, and highly durable, this is the perfect tool for any dentist! Your satis faction is our ultimate goal.
0 bids $4.00 Shipping
Condition: New Location: , United States
510(K)Number: K161892. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. (Leezoe-China-Beijing-86-15963302815). FDA declaration.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Features: 1. This centrifugal casting machine is indispensible for the production of high quality oral restorations. Durable and reliable,our casting apparatus easily handles most alloys with high melting-points that are used by dentists. 2. Cast denture frames, inlays, and crown bridges with ease! This item features a heavy duty spring and an adjustable balance mechanism and comes with 3 cradles and a pair of tongs. Specification: Dental Centrifugal casting machine(AE-5) Weight: 13kg Speed: 7000rpm Package Including: 1 X Centrifugal Casting Machine Dental Lab Equipment Teeth Healthy.
0 bids Free Shipping
Condition: New Location: Chino, United States
Its compact structure does not take up too much space wherever it is placed, and we believe it is a good helper for your work. It is suitable for a wide range of materials and many clinical applications, and is compatible with almost all dental thermoplastics, making it an indispensable tool for any dental practice.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New – Open box Location: , United States
Dental Model Square Vibrator Vibration Model 130/120w Oscillator Vibrating Equip SKU: JT-51BX This is a big power, high efficiency vibrator, the unique design of heat radiation base make it always work in long time. It has two grades, weak grade, strong grade, can be changed as necessary. Before power on, put the switch in the middle part “O”, and then power on, turn on the switch (the indicator light comes on), and choose the strong grade or weak grade, finally turn on the switch two or switch one, it starts to work. Features: Voltage: 110V/60Hz+-10% Power: 120W Maximum load:<=2KG Dimension:20.5×15.5×10cm (Inner packing size) Package Including: 1x New JT-51BX Small Square Dental Vibrator --------------------------------------------------------.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Investment Vibrator 4" Round Shaker Oscillator Lab Equipment This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: AC110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
$8.00 Shipping
Condition: New Location: La Puente, United States
Product Description: ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. . ★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time. ★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists. ★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded.
|
|
|
|