|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
Buy It Now
Free Shipping
Condition: New Location: Aurora, United States
With our easy-to-use Kegerator Conversion Kits, you can quickly and economically transform almost any refrigerator or freezer into an amazing beer dispenser! This high quality dual gauge CO2 regulator is perfect for draft beer dispensing, and ideal for kegerator conversions!
Buy It Now
$20.00 Shipping
Condition: New Location: Bend, United States
(Tanks can be used for five years between hydro tests). • 10 lb aluminum Co2 tank - Powder Coated Black. 10 lb aluminum co2 cylinder + TUBULAR Protective carry handle.
Buy It Now
$14.95 Shipping
Condition: New Location: Saint Louis, United States
Kit includes: 1. Black Plastic Faucet Knob. Beer Line Assembly ( 5 Feet of F. D. A. Brewery Approved 3/16 Clear Beer Tubing with Attached Tail Piece and Hex Nut, Washer, Plastic Clamp. 5 1/8" Nipple Shank Assembly. ).
5d 1h 3m 21s 0 bids
$6.12 Now
$9.29 Shipping
Condition: Used Location: El Paso, United States
Designed for ease and efficiency, this coupler ensures a seamless connection between your beer lines and keg, maintaining the integrity of your system. Simple to install and operate, it's an essential component for any draft beer setup.
Buy It Now
Free Shipping
Condition: New Location: Boise, United States
All of the parts you need to connect beer hoses to a shank for making a kegerator or anywhere you need to install beer faucets. (3) Neoprene draft tailpiece gasket.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
APX# 3094 & NY45-6 which is a 3/8" flare nylon seal. Stainless Steel Flare Cap-#3094.
Buy It Now
Free Shipping
Condition: New Location: Aurora, United States
For attaching beverage/air tubing to any standard keg coupler. This unit has a retainer ring on the base to hold your coupler's check valve in place. 3/8" Hose barb is perfect fit for standard 5/16" inner diameter co2 tubing.
Buy It Now
Free Shipping
Condition: New Location: , United States
Heavy duty faucet wrench for draft beer with comfortable vinyl coated handle for easy gripping. A very handy item for any kegerator owner to have whether you're tightening your beer faucet or keg coupler.
Buy It Now
Free Shipping
Condition: New Location: Platte City, United States
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
All you need is a cooler, drill, and our Jockey Box Stainless Coil Kits to build your own high quality draft dispensing system. Serve cold draft beer in style at your next party or event. Custom jockey box coils and coolers are available.
Buy It Now
Free Shipping
Condition: Used Location: Gays Mills, United States
The pump is untested, and sold as-is. Nothing looks broken or anything, I just have no way to test it. Please feel free to message me if you have any questions.
0 bids Free Shipping
Condition: Used Location: Sacramento, United States
Buy It Now
Free Shipping
Condition: New Location: Port Huron, United States
Turn your Intertap faucet into a self-closing faucet with the use of this faucet spring. Forces the tap handle back to the closed position when you let go.
Buy It Now
Free Shipping
Condition: Used Location: Garden Grove, United States
• (3) - MICRO MATIC CO2 GAS REGULATOR 34DH. • (4) - KEG COUPLER W/HANDLE. • (1) - MICRO MATIC CO2 GAS REGULATOR 792-402US.
0 bids $300.00 Shipping
Condition: New Location: , China
Applications: Compatible with Case Backhoe Loader 580K 580SK 590. Size: ID 58mm x 225mm.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
If you need a beer keg coupler then this is the right choice. When you disengage this coupler from kegs, there’s no leaking from the probe of the coupler(made of stainless steel). The most common coupler in the US is the D coupler or “D” System Coupler.
0 bids Free Shipping
Condition: Used Location: San Antonio, United States
Kegerator For Sale  Insignia™ - 5.6 Cu. Ft. 1-Tap Beverage Cooler Kegerator - . Condition is Used. Shipped with USPS Ground Advantage.
Buy It Now
$6.01 Shipping
Condition: Used Location: Tucson, United States
It will leave our building in good condition.
0 bids Free Shipping
Condition: New – Open box Location: Decatur, United States
Buy It Now
$9.90 Shipping
Condition: New Location: Saint Louis, United States
Perfect when dispensing 2 kegs using 1 Regulator. Simply connect the pressure hose leading from your regulator to the hose barb on the 2 way air manifold. You now have 2 - 5/16 hose barb shut off outlets that can connect to your keg couplers.
Buy It Now
Free Shipping
Condition: New Location: Comanche, United States
Choose the right size you need to get the job done!
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
APX# 202004.
Buy It Now
Free Shipping
Condition: New Location: Aurora, United States
This 0.5 micron pumice carbonating stone will diffuse Co2 or Nitrogen into your product, with little or none of the normal shaking / rocking normally required for manual carbonation! Stainless steel ball lock carbonating keg system.
0 bids Free Shipping
Condition: Used Location: Llano, United States
3 orange stoppers, light strip, and filter. Led light on top to light bottle area, LED light where dispenser's at. Shot Glasser Freezer/Chiller: Includes 34 Shot glasses, can hold up to 48 shot glasses.
0 bids Free Shipping
Condition: New Location: Gibsonton, United States
This unit features a 4 tap tower with a 10 1/4" faucet height that allows you to easily fill pint glasses and pitchers with local microbrews, international macrobrews, and everything in between. It holds (1) 1/2 keg, (2) 1/4 kegs, or (4) 1/6 barrel kegs, and features 1 solid door that will not only self-close to prevent potential energy loss, but also lock to prevent theft during off hours.
Buy It Now
$10.00 Shipping
Condition: New Location: Panorama City, United States
Brand New never used Kegco 0-60 beer regulator high pressure gauge is 0-3500. Please see photos. Excellent brand new condition. "T" bar adjustment with lock nut. Perfect for your beer set- up. Check my feedback, Ships right away! Local pick-up okay. See my other listings for more beer and soda gear.
Buy It Now
Free Shipping
Condition: New Location: Clermont, United States
Brand new never used. Open box only for photos Premium Plus CO2 Gas Regulator Beer - Primary - Low Pressure - 0-60 PSI - 2 Gauge Safely control the flow of CO2 with our Premium Plus low pressure primary co2 gas regulator beer. For added safety, this model has an integrated pressure relief valve that vents if pressures exceed 55-65 PSI. This primary regulator comes with an output gauge that monitors pressure up to 60 PSI to provide you options for different beers while the tank gauge has a 0-3000 PSI range so you know how much pressure remains in your cylinder
Buy It Now
Free Shipping
Condition: New Location: Phoenix, United States
An integrated pressure relief valve provides you with added safety and peace of mind by ensuring the gas flow is cut off if the pressure gets too high. This tap tower is air-cooled to keep all your beers chilled to perfection, and its 8" faucet height easily accommodates glasses of all sizes.
0 bids Free Shipping
Condition: New other (see details) Location: NEWTOWNABBEY, GB
U-type keg / barrel connector coupler with pipe fittings. Refurbished
Buy It Now
$10.00 Shipping
Condition: New Location: Chino, United States
Specification Material: Stainless Steel, Copper, PU, PVC Mounting Type: Free-standing Color: Silver Process: Electroplating Pressure Reducing Valve Model: American Standard CGA320 Dispenser Type: D Gross Weight: 7kg/15.43lbs Net Weight: 6.6kg/14.55lbs Package Size: 25*25*40cm/9.84*9.84*15.74in Beer Tower Diameter: 7.6cm/2.99in Beer Tower Height: 36cm/14.17in Drip Tray Size: 30*18*2cm/11.81*7.09*0.79in Package Included 1 x Dual Gauge Regulator 1 x Beer Tower 2 x Beer Faucets 2 x "D" Keg Coupleres 1 x Drip Tray 2 x Beer Pipes 2 x Faucet Covers 1 x Wrench All Accessories Needed for Installation Notes Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.
Buy It Now
Free Shipping
Condition: New Location: , United States
Single 5/16" Hose Barb. This model has a 5/16" barbed check valve. Equipped with an external safety. Use with Nitrogen or Beer Gas (G-Mix). Dual Gauge Primary Nitrogen Regulator.
Buy It Now
Free Shipping
Condition: New – Open box Location: Ogden, United States
Buy It Now
Free Shipping
Condition: New Location: Wyoming, United States
Complete with Handle & CGA320 Valve. Valve Installed CGA320. with Siphon Tube. This new multi-purpose 10 lb. aluminum carbon dioxide tank is lightweight and rust-resistant with its thick, corrosion-proof body.
0 bids Free Shipping
Condition: Used Location: Chadds Ford, United States
This pair of beer keg couplers is perfect for draft beer dispensing in your bar or restaurant. With a durable design and a yellow handle, they are easy to use and maintain. These couplers are suitable for kegs and are made of high-quality materials, ensuring a long-lasting use.
Buy It Now
Free Shipping
Condition: New Location: Tonawanda, United States
COLDTOWER KEGERATOR TOWER COOLER s are the all around BEST tower coolers you can buy ! When you want your house or car as COLD as possible, what do you do???. BLAST the AC ! I have constructed and tested many different designs in my years of producing tower coolers, and have found the most important factor in cooling a beer tower is the rate of airflow into it.
0 bids Free Shipping
Condition: New – Open box Location: Kansas City, United States
Se Habla Español.
Buy It Now
Free Shipping
Condition: Used Location: Gurnee, United States
It weighs just under 8 lbs. Requires a gas regulator. (Check your area.).
0 bids Free Shipping
Condition: Used Location: Visalia, United States
Buy It Now
$200.00 Shipping
Condition: New Location: , UA
With iTap PRO, you can easily counter-pressure fill glass bottles and growlers. This counteracts foaming, while protecting the beer and extending its shelf life. Beer connection: 8 mm barb. Gas connection: 8 mm barb.
Buy It Now
Free Shipping
Condition: New Location: Eden, United States
Perlick 1 Tap Beer Tower Chrome Stainless Finish 858-408TF W/ 408X Single Faucet. Additional expedited holiday shipping methods are available upon request for qualifying items.
Buy It Now
$30.95 Shipping
Condition: New Location: Saint Louis, United States
TT8CRG- NEW 8 Faucet Stainless Steel "T" Tower - GLYCOL READY - faucet satin finish stainless steel with 3" od pedestal tube built for recirculating GLYCOL COOLED DISPENSING. Includes 4 mounting screws, 6' of attached 3/16" id clear hose per faucet - copper glycol loop system with 3/8" outlet barb fittings for easy connection to 3/8" od trunk line - spray foam insulated.
Buy It Now
$19.99 Shipping
Condition: Used Location: , United States
ANHEUSER BUSCH BEER tubing. Photo of actual item.
Buy It Now
Free Shipping
Condition: New Location: Wyoming, United States
CGA580 Valve. Valve Installed CGA580. This new multi-purpose 60 cubic foot steel tank is mid-size, but heavy duty and hard working. It is great for any of your chosen inert gases; argon, nitrogen, or helium.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
This jumper is used to attach two draft lines together, for quicker, easier cleaning. Connects to the faucet shanks. We are here to help you resolve these issues as quickly and easily as possible. Failure to do so may substantially delay the processing of your credit.
Buy It Now
$145.00 Shipping
Condition: New Location: Saint Louis, United States
PTB-14SSG- NEW - MADE IN THE U. S. A. STAINLESS STEEL GLYCOL READY 14 Faucet Draft Beer Tower with 4" pedestals - brushed stainless steel finish. Built for recirculating glycol cooled dispensing. Includes: 8 mounting screws - all beer faucets and 6' of attached 3/16 FDA approved beverage hose per faucet.
Buy It Now
$14.50 Shipping
Condition: New – Open box Location: Jurupa Valley, United States
Micro Matic Beer System Blower with Bracket,12 CFM Fits 1" Hose. New unused Blower with cord. Fits 1" Hose. 8ft power cord, 115 VAC. For short Beer Line Runs and Cooler Air Circulation. See the detailed pictures in the listing.
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
This kegerator tower kit includes a 5ft beer tubing, 1 D-system keg coupler, 1 dual-gauge CGA320 regulator, 1 tap wrench, 1 cleaning brush, 1 faucet cover, and a set of assembly accessories. VEVOR single tap kegerator tower kit serves a variety of beverages, featuring 8mm internal insulation foam that minimizes the impact of external temperatures, ensuring beverages like beer, kombucha, soda water, and carbonated drinks remain at the ideal temperature for a perfect taste.
Buy It Now
Free Shipping
Condition: New – Open box Location: Powder Springs, United States
New Open box
Buy It Now
Free Shipping
Condition: New Location: Holt, United States
The comfortable grip handles make it easier to maneuver when full, while the rubber base protects both your floor and the keg itself. This durable keg is constructed from high-quality 304 stainless steel and manufactured in an IFSSC 22000-certified facility.
0 bids Free Shipping
Condition: New Location: Belton, United States
EASY TO USE: The ProFiller Wand features an auto-stop function that halts flow when the bottle reaches the desired level, simplifying the bottling process and allowing for hands-free operation. Just insert the wand into the bottle and let it do the work.
Buy It Now
$2.90 Shipping
Condition: New Location: Saint Louis, United States
Material - Food Safe durable rubber. Total Length = 1.5 ". FAUCET NOT INCLUDED.
Buy It Now
Free Shipping
Condition: New Location: Racine, United States
CHRISLAN 11 1/2" CERAMIC TAP HANDLE. FINE FOR TAVERNS, REC-ROOM, MAN CAVES. FAIR PRICE. NEW IN THE BOX.
Buy It Now
Free Shipping
Condition: New – Open box Location: Wooster, United States
Delta 9913-RB-DST Essa Single Handle Pull-down Bar Faucet - Venetian Bronze Open box, item is new and complete, hardware bags are still factory sealed. Shipping is free. Feel free to message us with any questions. Thanks for looking!
0 bids Free Shipping
Condition: Used Location: O Fallon, United States
GLYCOL CHILLER FOR COOLING DOWN BEER LINES. GREAT CONDITION! Glycol Mixture 40% Glycol 60% Water. Glycol Tank Capacity, gal 5.5. Capacity, BTU/hr evap 20F 3200. Compressor Power, hp 3/8. Pump Type 80 gal/hour.
Buy It Now
$9.90 Shipping
Condition: New Location: Saint Louis, United States
4338Af - Shanks connect your faucet to the beer line when going through a wall or refrigerator. Features: 8" long 1/4" bore Material - Nickel plated brass O.D. = 7/8" Includes: Faucet Coupling nut Sleeve - STAINLESS STEEL FLANGE NOT THE BLACK PLASTIC WHICH CRACKS !
0 bids $6.99 Shipping
Condition: New Location: Scottsdale, United States
Use this "German Slider" keg coupler to fit most German beers in "A" system kegs! CHECK OUT THE WONDERFUL ENGRAVING EMBOSSED ON THE OUTER CRATE END! THIS IS A UNIQUE CRATE THAT SHOULD BE FUN FOR YOUR WINE WALL IN YOUR CELLAR OR GARAGE WALL OR BAR AREA WALL OR ANY OTHER CRAFTS YOU CAN IMAGINE!
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Material: Stainless Steel, Copper, PU, PVC Mounting Type: Free-standing Color: Silver Process: Electroplating Pressure Reducing Valve Model: American Standard CGA320 Dispenser Type: D Gross Weight: 7kg/15.43lbs Net Weight: 6.6kg/14.55lbs Package Size: 25*25*40cm/9.84*9.84*15.74in Beer Tower Diameter: 7.6cm/2.99in Beer Tower Height: 36cm/14.17in Drip Tray Size: 30*18*2cm/11.81*7.09*0.79in Package Included 1 x Dual Gauge Regulator 1 x Beer Tower 2 x Beer Faucets 2 x "D" Keg Coupleres 1 x Drip Tray 2 x Beer Pipes 2 x Faucet Covers 1 x Wrench All Accessories Needed for Installation Notes Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.
0 bids Free Shipping
Condition: Used Location: O Fallon, United States
ASK US ABOUT THIS OPTION. Self closing interchangeable door with key lock. Stainless steel interior and floor. Heavy duty rubber caster wheels. FITS 4 1/6 barrel KEGS.
|
|
|
|
For sale is a draft beer tower Including a faucet and drip tray with drain. These were all used in the metrodome. And bought at a food service auction. Drink beer from the same equipment that millions of fans drank from over the years!
|
|
USED BEER KEG TAP AND FAUCETS. HAS A BLEEDER BLOCK AND 3 TAPS AND 3 FAUCETS. EXTRA LONG FAUCET FOR MOUNTING THRUTHICKER WALLS IF NEEDED. RULER NOT INCLUDED. ============================================ ++++++++++++++++++++++++++++++++++++++++++++ ============================================ ANY ITEM PICKED UP LOCALLY IS CASH ONLY PAYMENT IN U.S. FUNDS ONLY PHOTOS ARE ACTUAL ITEMS LISTED ITEM SHIPS WHEN PAYMENT CLEARS SHIPS TO U.S. LOWER 48 STATES ONLY I DO NOT SEND SECOND CHANCE OFFERS PLEASE! ASK QUESTIONS NOW NOT LATER I RESERVE THE RIGHT TO CANCEL ANY OR ALL BIDS ITEM IS SOLD"AS IS" WITH NO WARRANTIES EXPRESSED OR IMPLIED SHIPS ONLY TO CONFIRMED ADDRESS IN THE LOWER U. S. WILL NOT SHIP TO P.O. BOX ADDRESS. APO, OR FPO( SOMETIMES SHIPPING UPGRADED TO PRIORITY& MAIL THE SAME ... moreOR NEXT DAY. IF I FIND IT SOLD& PAID FOR IN TIME. SOMETIMES SOME ITEMS THAT DIDNT SELL WILL RELIST AT A LOWER PRICE. SO YOU CAN MARK THE ITEM AND WATCH IT) ITEM DESCRIPTION IS A GENERAL DESCRIPTION ONLY. I STRIVE FOR 100% SATISFACTION AND TRY TO BE ACCURATE IN THE DESCRIPTION BUT I THINK IT IS ALMOST IMPOSSIBLE TO DESCRIBE EVERY SMALL SCRATCH. MARK, NICK, DENT AND DETAIL. PICTURES OF ITEM ARE NOT TOUCHED UP OR DOCTORED, I TRY TO ACCURATELY SHOW WHAT YOU WILL SEE WHEN YOU OPEN YOUR PURCHASE. IF DESCRIPTION AND PHOTOS LEAVE QUESTIONS OR DOUBT FOR YOU, PLEASE ASK AND I WILL TRY TO FURTHER SATISFY YOUR CONCERNS BEFORE YOU BID. ANY QUESTION WITHOUT A REGULAR EMAIL ADDRESS INCLUDED WILL NOT RECEIVE A REPLY-SIMPLY UNCHECK THE BOX THAT HIDES YOUR EMAIL ADDRESS RETURNS ONLY IF ITEM IS NOT AS I HAVE DESCRIBED IT. BUYER MUST CONTACT SELLER BEFORE RETURNING. NO RETURNS ON ITEMS THAT BUYER DID NOT INSURE. ITEM MUST BE RETURNED INSURED AND IN ORIGINAL CONDITION. UNUSED AND UNDAMAGED WITHIN 3 DAYS-BUYER PAYS ALL SHIPPING AND INSURANCE.
|
|
|
BEER TOWER 1 1/2" TUBE WITH STOUT FAUCET AND GUINNESS LABEL NOT SURE IF THE LIGHT WORKS THE REST WORKS GOOD 20" TALL
|
|
|
This beautiful SKOL beer tower with brass/ wooden faucet. It stands approximately 21" tall( not counting upper end of faucet) and is about 7" in diameter at its widest. Made of ceramic with gold-finished accents. This beer tower has the classic SKOL logo on 3 sides, and wheat ornaments all over the body. The tower is very clean and has only light wear(a handful of scratches on the metal and one small mark on the porcelain top) Please see the photos for more detail and feel free to contact me with any questions. Thanks for looking! THIS IS A BIG-HEAVY-FRAGILE ITEM NEED A BIG BOX WITH LOT OF PROTECTION FOR SHIPPING. FLAT RATE $ 30 ANY OVER PAYMENT IN SH WILL BE REIMBURSED TO WINNER. BOX+PEANUTS+POSTAGE) SHORT PAYMENT IN SH WILL BE PAID FOR ME.
|
|
|
It's in good condition. Buyer pays shipping.
|
|
|
THIS IS A CORNELIUS REFRIGERATED BEER KEG TAP USED ONCE DEMO MODEL. CORNELIUS MADE IN ITALY. NOT A CHEAP COPY MADE IN CHINA) REPLACEMENT PRICE $2,300.00 PLUS GST. IF YOU HAVE ANY QUESTIONS PLEASE CALL IAN ON 0418764997.
|
|
First off. I have purchased this Beer Tower and some other items from a country tavern that closed down about 4 months ago. I have not tested the items I purchased. I was told they were in working condition when they were removed. This item is used. This auction is for a Beer Tower with two tappers or faucets. One faucet says Superior Products and the other faucet says Perlick. The tower has no name on it and it is about 12 inches high by 3 inches wide at the top and the base is about 4 1/2 inches. I don't see anything major wrong or broke. The tower does have some scratches-see photos- and the faucets have some light scratches. Basically I just wiped it down. When I look inside I see the two valves coming in but I do not see any line coming down the tower-just the two tapper nipples sticking ... moreout. This would be a great item for a home draft brewery or home bar. Please check out all photos for detail and condition and bid accordingly. Also keep us in your watch for more brewery items. You are buying this Beer Tap Tapper Tower in As Found used condition. Shipping Insurance is included in our shipping quotes. THANK YOU FOR CHECKING OUT OUR AUCTION. PLEASE CHECK OUT PHOTOS CAREFULLY AND READ ALL OF DESCRIPTION. WE TRY OUR BEST NOT TO HIDE OR MISS ANY DETAILS. IF YOU HAVE ANY QUESTIONS ON THIS ITEM OR SHIPPING PLEASE CONTACT US BEFORE YOU BID. 99 PERCENT OF THE TIME WE SHIP SAME OR NEXT BUSINESS DAY MONDAY THRU FRIDAY WHEN THE PAYMENT HAS CLEARED.
|
|
|
Two Krome Dispense draft beer faucets. Well cared for and coming to you clean. I have replaced my taps with the perlick 525SS. Posted with
|
|
|
Perlick two faucet 3" diameter chrome. Glycol cooled, draft beer dispensing tower arm with Perlick Perl 525PC faucets. Tower has polished stainless steel body. Faucet made of chrome plated brass. Forward seat design prevents lever from sticking. TOWER: 3" diameter. 4 1/2" base flange and cover, 12-11/16" tall column, 9" from counter to faucet bottom. FAUCET: 1" Width x 4" Height x 2-3/4" Diameter. g6.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B%3Eg6%3E-1484d10686d-0x10f-
|
|
|
From a vintage bar. Full brass and solid. Valued over $4500. Local pickup. Any questions please ask.
|
|
|
Two tower 8 tap stainless steel beer dispenser. Great for home or restaurant use. All offers considered.
|
|
Believe this piece was originally out of a bar. Used to dispense something or another. Was found in a lot of WWII items at an estate sale. Not sure where the gentleman aquired it. As you can see in the photos it shows wear and tear. Reads E. Gamberoni Bizarte on the one side and L. Crama Etain 1er Titre Doual 1943. It stands 3 1/4in. tall. Guessing it probably does not work. Please look at the photos closely and ask any questions you may have prior to purchase. Please read the description and view our photos closely. We try to be as descriptive and accurate as possible. As you can see. We sell a wide variety of items in our store. We do not claim to be experts on each and every item, nor are we trying to sell you the" S i Z z L e" What is described and photographed is what it is. ... moreIf you think it's missing something or you have any questions please contact us and we will answer as quickly possible. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. If you receive your item and you're not 100% satisfied please send it back for a full refund of the purchase price. We do not refund return shipping. We try to make our business as drama free as possible. Thank you for your cooperation. RWTradingPost. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Fully working and lightly USED chrome plated standard beer faucet and black handle with chrome beer shank with built in 3/16" nipple and bore. The shank is 5 5/16" in total length. With the black collar. It will extend 4 5/16" with nipple. The threads are 3 5/8" See images for more details. Included: 1 chrome plated beer faucet 1 standard black plastic tap handle 1 black plastic collar 1 chrome plated shank with integrated nipple. See above for dimensions 1 nut for shank
|
|
|
THIS IS A VERY NICE PERLICK VINTAGE 4 TAP BEER TOWER.IT HAS A FEW LIGHT SCRATCHES AND A LITTLE WEAR ON BASE BOTTOM EDGE.IT IS COMPLETE WITH ALL SERVICE LINES.THE TAPS ARE MADE OF COPPER THAT ADDS A NICE CONTRAST TO THE BRASS.NO DENTS IN BRASS.NO CHIPS IN CERAMIC.CERAMIC IS DARK BLUE. I TOOK THIS COMPLETELY APART AND CLEANED IT THEN POLISHED ALL THE BRASS.I WOULD SUGGEST CHECKING ALL THE TAPS TO MAKE SURE THE SEALS ARE GOOD.THIS COMES AS IS WITH NO WARRANTY. 20 INCHES TALL WITH A 8 INCH BASE. SEE PHOTOS S/H 59.00.PACKED TO INSURE IT ARRIVES AS SHOWN WITH NO DAMAGE IF YOU HAVE ANY QUESTIONS I WILL BE MORE THAN HAPPY TO ANSWER.
|
|
Beer is Fun! Faucet and Shank.Build a kegerator. Keezer(freezerator) or add a faucet to what you have now! Standard American 7/8 threads.I disassemble the unit.soak it in brewery approved cleaner and sanitizer.reassemble and polish. Overall Length-8.5" Shank Length- 6" 11 total faucets and shanks for sale. Defects: See above.See photos. Condition: Very Good. I do combine shipping to save you $$$. If you do win two auctions. request a total" before paying. I will send you a combined invoice. Pay that lower cost invoice and I will ship right away! Height 4 inches Width 8.5 inches Material Chrome& Brass Shipping Weight 1 lb.15 oz. About the Beer: As always I guarantee that you will be happy with your value. Thanks for looking! Check out my other beer stuff I have for sale! ... moreThanks for your interest. waddinsky Noteworthy Feedback: 1. Awesome seller! great transaction. Super fast shipping; buy with confidence! 2. Worked extensively to fix order mistake. Thanks" Bitmap 3. Thanks! I love it! Kegerator Kit) And it was a great price for a great item! Bitmap Think Green Bitmap I use recycled packaging whenever possible. Drink Draft Beer-No cans or bottles ever make it into the environment! Saves energy too! Bitmap Bitmap Note: Any equipment that comes in contact with your beer should be thoroughly cleaned before use. My goal is for you to be a happy customer. When you are happy you will buy from me again. I strive for accurate descriptions. Courteous communication and great packaging. I ship as quickly as possible(mostly the next day after payment is received) If you have a problem or question please contact me and I will address it promptly. Once you feel completely happy with the value of your purchase. Please leave positive feedback. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3F4f%3E-14857ec92ab-0x10e-
|
|
Lot of 48 Stainless Steel Lever Beer Tap Dispenser Faucets Shipping Info(Click to Enlarge) Click to Enlarge) Click to Enlarge) Description We recently liquidated these faucets from a storage unit. They originally came out of a bar that had a multi tap system. All the items pictured will be included in the auction. These retail new for over $27 each! We are offering the entire lot for a low minimum bid and NO RESERVE! DON'T MISS OUT ON THIS GREAT DEAL! THIS ITEM WILL BE SENT UPS GROUND. PLEASE USE CALCULATOR TO ESTIMATE SHIPPING. Shipping Info We strive to provide an accurate representation of our products. All equipment is tested and in working order unless stated otherwise in the listing. However. We do not test any equipment using food products that it is designed for. The extent of ... moreour testing is to power up the unit and make sure all functions are working. Please be advised that equipment has been previously used, and products may have dings, dents, scratches, etc. We do clean the equipment to the best of our ability but please do not expect a spotless piece of equipment All equipment is sold'as is' and does not come with any warranties. Pictures cannot show everything. So please email with any questions. We have a large inventory of used and reconditioned restaurant equipment. Please contact us with any other needs you may have. Buyer to pay actual shipping charges from Charlotte. NC. In most cases, items will be shipped within 3 business days of receiving payment. Most items weighing under 100 pounds are shipped through UPS Ground. Any items shipped UPS Ground are automatically insured for the amount of sale. However. We will not take responsibility for items lost or damaged during shipment. When making a shipping inquiry. Please state whether item will be going to a business or residence. If the item in question is to be shipped through a freight carrier, please state whether any additional services will be necessary. Services such as lift gate delivery, inside delivery, residential delivery, a
|
|
Polished Chrome Plated Kegerator Faucet In Mint condition I do not ship out of the country. Lately. I have had trouble with people not paying for my ebay items. Because of this, I am requiring that all my ebay items be paid within 24 hours of winning the auction. If the item is not paid within this time, the item will immediately be relisted. Shipping is calculated by the USPS based on weight and destination of package. I do not set the price for shipping nor do I make any money off of shipping. I cannot be held responsible for what happens to your package during shipping. I will do my best to package your item and if it is fragile I will be sure to write fragile on your pkg. If you are worried about your item please request shipping insurance for an additional fee. Color may vary slightly ... moredue to flash and natural lighting. Please be sure to check out my other items in my ebay store. I accept Paypal only. Comes from a smoke free pet free home. I include delivery confirmation on all my items. Please bid with confidence as all sales are final. Items are shipped out within 48 hours of cleared payment unless it is a holiday or weekend. Please check my feedback. I strive to give you the best most honest description I can. I am human and mistakes can happen. If you have any problem at all with your item/items please contact me prior to leaving feedback and I’ll do my best to work it out with you. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Two Tubular"T" brass towers with faucets(including one or two Guinness) Have a beautiful old patina on them but these are not that old. If you are working on a place and want a rustic look leave them as is- or get some brasso and they will shine like new. The price is per each with two available. Better deal if you buy two.
|
|
Beer Tap Faucet Distillery Brewing Heavy Brass Handle 1" Threaded Bar Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Vintage Bar item. Dimensions are in the photos. Store Policies: The majority of these items have been acquired through business liquidations and Police auctions. I will do my best to describe and photograph these items but please understand I'm not the original owner. I'm happy to answer questions please email me and I will respond in 24-48hrs. We do our best as sellers to describe these items accurately. Buy items from the Television Show on"Baggage Battles" Travel Channel in U S. OLN In Canada, Quest in the UK, A&E in Au stralia. The Nifty Thrifty Location has been closed and ... moremoved to an online ma rketplace! Inquire on items even if you do not see them on eBay. NYS TAX Applicable to Sales in NEW YORK STATE. 8.625% It will be automatically added to your invoice. Feedback: We ask the buyers to leave 5 stars on all categories in feedback. If you feel that we did not meet your expectations please allow us the opportunity to make this right. Add us to your favorite seller lists! Follow me on Twitter: MarkMeyerHere Like us on Facebook: MarkMeyerBB I will ship to USA. Canada, PR, Japan, UK, Australia. International Shipping is more difficult to estimate prices, please email for a price quote. I'm a good seller and will work with my customers to ship my product around the world. The BUYER is responsible for your local customs taxes, duties,or fees of imports. Thank you. I will not ship to some parts of Europe, Asia, Central or South America. Payment is acceptable by Paypal or Cash for local pickup(Long Island NY) If you use a check through paypal. Please be patient as I wait till the check clears before shipment. Thank you. New York State Sales Tax applicable, Tax Rate 8.625% Returns are Accepted for 14 days. Return Shipping is paid for by the buyer. On Items that have VIN or serial numbers, verificatio
|
|
Beer 4 Faucets- Polished Crome Stainless Steel- Glycol Cooled by MICRO MATIC COMES WITH STEEL BEER DRIP TREY. Faucets4( Tap Handles not included) FinishPolished Stainless Steel Connection(Product)1/4" O.D. Stainless Steel tubes with tapered barb 1/4"3/8" Connection(Glycol)3/8" O.D. Copper tubes with 3/8" barb fitting Length24" Height16" Faucet Height11" See more at: http:www.micromatic.com/draft-keg-beer/towers-pid-METRO-T-4PSSKR-tab-reviews.html#tabcontent CAME OUT OF WORKING BAR Seller's payment instructions No returns if any are forced to take 25% stocking fee and buyer pays all shipping pulse all fee's. Shipping& Handling I ship within the 4 business days(usually less than 2 business days) after receipt of the payment. Each item is packed ... morecarefully to make sure it gets to you in excellent condition. Each package comes with a tracking number. Rates: USA: TBD via USPS Payment Paypal I accept PayPal. You must have funds in your PayPal account. Have the account linked to your bank, or your credit card. Shipping address must be PayPal confirmed. b I Don't accept other forms of payment. I will not ship until I receive payment. So use the payment services above if you want your product faster! Please email me when you mail your payment so I can get an approximate timeframe as to when I will receive it. Terms Of The Sale Payment is expected within 5 days of auction close. Unless prior arrangements had been made. If payment is not received within 7 days a Non-Paying Bidder(NPB) warning will be filed with eBay. A negative feedback will be left if the buyer does not answer the NPB warning within 10 days. I am a reasonable person and as long as the communication channels are open and clear. I have no problems accomodating special circumstances. By entering a bid. You are entering into a legal binding contract to purchasing the item described above. Please do not bid if you are unable to comply with the terms of the sale and eBay policies, or are unsure/unable to pay
|
|
MICRO MATIC Beer 4 Faucets- Polished Stainless Chrome Steel with Drip trey. one faucet is an Ale& Stout.Crome Stainless Steel- Glycol Cooled by MICRO MATIC COMES WITH STEEL BEER DRIP TREY. Faucets4( Tap Handles not included) FinishPolished Stainless Steel Connection(Product)1/4" O.D. Stainless Steel tubes with tapered barb 1/4"3/8" Connection(Glycol)3/8" O.D. Copper tubes with 3/8" barb fitting Length24" Height16" Faucet Height11" See more at: http:www.micromatic.com/draft-keg-beer/towers-pid-METRO-T-4PSSKR-tab-reviews.html#tabcontent CAME OUT OF WORKING BAR Seller's payment instructions No returns if any are forced to take 25% stocking fee and buyer pays all shipping pulse all fee's. Shipping& Handling I ship within the 4 business days(usually ... moreless than 2 business days) after receipt of the payment. Each item is packed carefully to make sure it gets to you in excellent condition. Each package comes with a tracking number. Rates: USA: TBD via USPS Payment Paypal I accept PayPal. You must have funds in your PayPal account. Have the account linked to your bank, or your credit card. Shipping address must be PayPal confirmed. b I Don't accept other forms of payment. I will not ship until I receive payment. So use the payment services above if you want your product faster! Please email me when you mail your payment so I can get an approximate timeframe as to when I will receive it. Terms Of The Sale Payment is expected within 5 days of auction close. Unless prior arrangements had been made. If payment is not received within 7 days a Non-Paying Bidder(NPB) warning will be filed with eBay. A negative feedback will be left if the buyer does not answer the NPB warning within 10 days. I am a reasonable person and as long as the communication channels are open and clear. I have no problems accomodating special circumstances. By entering a bid. You are entering into a legal binding contract to purchasing the item described above. Please do not bid if you are unable
|
|
Please read carefully description of auction in particular condition of item and contents of auction( what in box section) If You don't agree with any terms please do not bid. UP FOR SALE: USED Quick Mount Single Tap Kegerator Tower and Accessories CONDITION: Looks very good. Taken from the cracked Smart + Products SPP155BDSS Freestanding Keg kegerator. PLEASE LOOK PICTURES FOR MORE INFORMATION ABOUT CONDITION AUCTION INCLUDE S: Tower and accessories like you see on the pictures Nothing else. Item is not original( open) box You will receive everything what you see on the pictures and what is in section"AUCTION INCLUDES" mentioned. Nothing else Look at the pictures and descriptions before placing your bids. SHIPPING ECONOMY SHIPPING TO 48 CONTINENTAL US CUSTOMER ONLY NO PO BOX ... moreADDRESS WE WILL SHIP TO PAYPAL CONFIRMATION ADDRESS ONLY WE WILL SHIP TO 48 US ONLY HAWAII. ALASKA with extra cost Customer is responsible for all import fees. Customs fees, duty fees, taxes, brokerage fees, etc. This item cannot be returned or exchanged If the package is refused. Returned or abandoned at the time of delivery for whatever reason, the customer will only be refunded the purchase price of the item minus the original shipping cost, and minus any Customs Fees, Import Fees, Duty Fees, Taxes, Brokerage Fees, etc. that are incurred as the result of the item being returned to the United States. WE DO NOT SHIP TO AFRICA or to the MIDDLE EAST. Emails sent from these locations requesting shipping quotes will not be answered. Take a look at the pictures and descriptions before placing your bids. PAYMENT: PayPal Only- P lease Take a look at the pictures and descriptions before placing your bids. THANK YOU FOR VISITING OUR AUCTION AND CHECK OTHER AUCTIONS!
|
|
Twin Tower. 10 Tap Draft Beer Dispenser. Vintage early- mid 20th Century Tavern or Bar Tap. A Collector's Dream. 8 Original Brass Taps stand atop twin brass cylinder towers. The tap has a beautiful aged patina that with a little TLC could be brought up to be the CENTERPIECE of any serious Breweriana Collection. Put it back to work in your Historic Bar or Mancave or use it as an attractive and period-correct Pull Tap Display. The left and right spigots each have a splitter mounted to give a total of 10 spigots.this could be removed and brought back to its original 8 spigot configuration. From a Tavern in a Lumber River Town in Central Wisconsin.Mosinee.called Little Bull Falls earlier in its history. This tap was sure to have served thirsty workmen from the paper mills. Lumber camps and ... morefields. Local breweries in the area were Mathie Ruder, Wausau Brewing Company, Stevens Point, Marathon Beer and more. All these historic beers as well as the big national beers flowed through these taps. This historic piece measures just a tad over 24 inches long. It stands ~15 inches tall. Each supporting tower is 10 3/4 inches tall. The rectangular'box' housing the spigots is 24 1/4 x 5 x 4 inches. Don't miss out on this authentic. Vintage piece of Breweriana History. Give your collection a boost.bid today. Bidding starts at.99 cents to get the ball rolling. There is a reserve. Shipping is $45 economy to the lower 48 states. Free shipping to the lower 48 states if the items brings more than $500. Thanks for looking! DISCLAIMER: I find antique and collectible items at Estate Sales. Auctions, Private Sales& Thrift Stores so the majority of the items that I sell are Vintage or used and may show signs of normal wear and age. Items are sold in the same condition that I find them which may mean that they are dusty and dirty from years of storage. I do my best to honestly describe everything as I see it, disclosing any damage or imperfections that I detect. However, I am not an expert. Please inspect my photos carefu
|
|
|
Used Perlick 2 Double Tap Tower Draft/Keg Cooler; Model: DS4KP Manufacturer: Perlick Serial Number: 451061 Model: DS4KP Volts: 115 Hz: 60 Charged Refrigerant: 134a Height: 38 1/2" Width: 84" Depth: 24 1/4" This used Perlick 2 double tap tower draft/keg cooler has been tested in our service department and works well. Flaws: Normal wear from use.
|
|
|
Kegerator Beer Faucet tap Handle with 4-1/2 inch x 1inch Shank Kit Brass lever. Everything needed to instal in refrigerator door. I only used it for on barrel of beer. Item is in excellent condition. Check out my other auctions for more kegerator parts I am selling. Costs over $45.00 new. Awesome deal.
|
|
|
GUINNESS COMMERCIAL LIGHTED ULTRASONIC BEER FOAM INITIATOR MODEL#787A6363-USED LOW PRICES ARE US PRESENTS UP FOR BUY NOW: THIS GUINNESS COMMERCIAL LIGHTED TAP HEAD ULTRASONIC BEER FOAM INITIATOR. USED CONDITION,SOME NICKS, MODEL# 787A6363,AC115V 12 VOLT POWER SUPPLY,MOUNTING BRACKET 10"X5"HEAD 13"X5" SLIDES IN TO BRACKET,GREAT ADDITION TO ANY BAR! RARE FIND FOR GUINESS LOVER! FOR MAN CAVE.
|
|
|
Single tap Danbury kegerator. Used for one keg. Includes soda keg. Excellent condition. Local pickup only- will not ship.
|
|
For your consideration is a Authentic British pub-style cask ale beer engine formally used at a local pub in England. Item was shipped along with large hand painted pub sign which is also available. Beer engine is mountable by screw clamps as depicted up to two inches thick. Weight is approximately 21lbs. without packaging. Beer engine composed of brass with porcelain handle and stainless steel guard and drip pan holder bracket. Plastic drippan did not come with beer engine nor tubing which would need to be replaced anyway if using. Have tried engine out and does pull liquid from pail. This is an authentic cask english beer engine with highly polished brass and porclein handle a remarkable show piece for any home bar, micro bar and would add that special touch. Item measures 27" H x 14"back ... moreto front with bracket x 8"W. Item will ship fed-x ground being cheapest approx $23. or shipping of your choice. This might vary a little depending on location and will be adjusted accordingly as I charge actual cost of shipping items. I have two available, one with black porclein handle and the identical item with white porclein handle. Please look at pictures as they are part of description. If you have questions please contact me and I will promptly respond. I will combined shipping cost for items purchased at one time. Thank you for looking.
|
|
|
Barely Used. Mint Condition, Beautiful 6-Faucet Draft Beer Tower with Drip Tray Perfect for restaurant or home use. Unit is in perfect condition. Installed for a new restaurant opening in October of 2013 and taken out in July 2014(less than one year old) Get a great unit for the fraction of the cost of a new one! Draft Beer Tower Features: Metropolis towers offer a dramatic Art Deco look! All 304 stainless steel contact with the beer: product lines. Shanks, faucets! Kool-Rite technology with patented cooling blocks and leak proof shanks! Polished stainless steel won't pit or chip like chrome! Visit the Manufacturers Website for Complete Specifications Normal 0 false false false EN-US JA X-NONE http:www.micromatic.com/draft-keg-beer/towers-pid-METRO-T-6PSSKR.html
|
|
|
Polished Chrome Beer Faucet Tap With Brass Shank and Handle For Beer Towers. Shank tailpiece accepts compression fitting hose ends. These items are used and may need some form of refurbishing before putting them to use.
|
|
|
Beer faucet with 6" shank and keg coupler. Used. Needs cleaning. Good start for kegerator.Only marking is Micro Matic di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-14881198437-0x109-
|
|
|
Replaced keg system at bar selling my older stuff. Please look at all pictures to show what is included. Faucets. Towers, tubing etc. Any questions please email me. Thanks and good luck bidding
|
|
|
I am selling this item for a Friend. You are bidding on an English Beer Engine. Was removed working from an English Pub about 10 years ago. Pullman type for cask conditioned ale. Clamp on type with two Abbot Ale Clips. Abbot Ale is brewed in Suffolk at Greene Kings's Westgate Brewery. Bury St. Edmonds, England. Brass and Porcelain hand pull, we believe the plinth is oak, with drip tray. Includes the swan neck with sparkler. Also includes the keg tap and hose. I am not able to test this item but I believe it is working. From what I can see parts are readily available. Very Unique ManCave item. I unscrewed the pull to make for more compact shipping. Actual cost shipping plus $3.00. Thanks for looking and good luck bidding. Sorry no refunds.
|
|
|
SLIGHTLY USED! single faucet beer tower. works perfect took it off my kegulator since i was replacing it with a two faucet. Comes with mounting screws. Hose and connection. Perferect for you homemade kegulator/ freezer unit/ or replacement.
|
|
|
Single Perlick Faucet Tower. It doesn't appear to have ever been used. Tower insulated with cork. Nice hard line runs through tower. Much easier to install and maintain. Perlick is one of the best.
|
|
|
Pabst blue ribbon 7.75 gallon polished stainless steel pony keg.
|
|
|
Vintage Brass 8 Tap Single Tower Draft Bar Beer Dispenser Very cool single tower 8 tap dispenser. No tap handles included. Please see photos for condition/description. Measurements are 20"W and 15" from the top edge of tap dispenser to the bar.
|
|
|
Five female quick disconnect came off a beer system. 4 have 5/16 barb and 1 has 3/8. Also one male included. Posted with
|
|
|
Stainless Steel Tap Faucet Beer 6" Shank- Used handle,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3F0%3C%3E-1489a79e597-0x107-
|
|
|
KEGERATOR KIT TAP SPIGOT CO2 TANK(empty for shipping) WITH REGULATOR AND HOSES. READY TO INSTALL.
|
|
Vintage Double Beer Tap Chrome Bar Soda Fountain( Offered for consideration is a vintage double beer tap. It measures about 18.5" tall x 8" across. And is in good operating condition. It needs a little cleaning as shown. Click on the pictures to super-size. If you have any questions feel free to ask. Please direct all questions through eBay. Especially after the item ends. I will miss them if sent to my regular email address. I am always happy to combine shipping. And thank you for looking at my item. SHIPPING I try to ship packages out within 1 business days of cleared payment. Large orders or very fragile pieces may take a little longer. I use commercial grade boxes. Peanuts, and bubble wrap for breakable items. I am always happy to combine shipping. I simply recalculate for weight ... moreand size. Return Policy I accept returns for any reason. Items must be returned in original condition with original tags. Returns must be made within 14 days of receiving the package. Return shipping is not refunded. I will only refund return shipping charges if there was an error on my part. Such as a major discrepancy in the listing. Mission Statement To satisfy customers through high standards. Professionalism, truth and honesty. I sell a variety of antiques, collectibles, replacement china, dinnerware, and much more. I try to accurately and completely describe the items. I do not lie by omission, and try to include any and all condition issues. I mainly sell used/vintage/antique items, and some wear is to be expected. Anything more than appropriate wear should and will be documented properly. If there is a problem, just contact me. Read my feedback, and bid with confidence.
|
|
Call us at 513-515-5934 with any questions or concerns. THIS IS A USED ITEM. IT IS NOT PERFECT AS IT SHOWS SIGNS OF WEAR WITH SOME SCRATCHES. It was removed from a working bar and was in operation before we removed it. Everything is for sale locally and can be removed from auction if someone takes it. All equipment is sold as is. Where is without any warranty expressed or implied. We test the equipment, take pictures and describe the equipment to the best of our ability. If it is not in the picture it does not come with it. Ask questions because we do not take returns. We pack our equipment with extra packing material to ensure safe shipping and a quality item arriving at your door. Don't be fooled by low shipping costs. Only you will pay the price for poorly packed items. A few extra ... moredollars for some piece of mind is a great value added bonus nowadays. Shipping price is for within the I-275 beltway of Cincinnati. Oh. We typically ship in the lower 48 continental USA states. PLEASE CONTACT US FOR A SHIPPING QUOTE(Alaska& Hawaii must wait for shipping quote before paying) The Buyer understands and accepts that shipping is Non-Refundable. The buyer understands and accepts that the Non-Refundable shipping policy applies to the rare cases of a product arriving DOA. Missing accessories, wrong model, wrong product, not as described, etc. I DO NOT SHIP INTERNATIONALLY. I DO NOT SHIP TO CANADA SO PLEASE DO NOT ASK
|
|
i000000. Draft Beer Dispenser Tap Faucet& Stem Shank Chrome Tap Rite W/ Nut Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge This auction is for a Used Draft Beer Dispenser Tap Faucet& Stem. It includes the nut as well. It is used with some marks and wear. It has not been used in some time. But is pretty clean. See pictures of all sides. What you see is what is included. Due to the age, it is sold AS-IS, No refunds or returns. Please use the shipping calculator for Priority or Parcel select shipping rates to your zip code. I accept paypal. Please Email any questions. See my other auctions for other Beer items, Beer Taps, Tins, beer signs, and other collectible beer stuff. Combine auctions to save on shipping. Pick up is always welcome ... moreon any of my items. As Always, NO RESERVE! PA residents must add 6% Sales tax. Ships within 1 day of receiving cleared payment. Payment must be received within 4 days from the end of the auction. I accept Paypal. Pickup is welcome with no fee. PA residents must add 6% Sales tax. inkfrog terapeak.
|
|
|
Very nice 10 tap head system This is a older unit that was built into a much older bar. The wooden mounting is rough and not well insulated and we are sure you will want to build a more modern mounting With that in mind we can remove the tap head system and ship just that. It would certainly cut down on the shipping cost for you Ships from zip code 14120
|
|
|
This came from a restaurant in Frederick MD. Dual Tap Chrome Draft Beer Tower with Faucets and Tap Handles. There are no hoses in the tower. There are some scratches on one side at the top. The bottom is stained by beer. It could use a new layer of chrome. One tap handle says"Venuti's Ale" which was the name of the restaurant. The other one is a Samuel Adams handle.
|
|
|
Offering at no reserve a large brass valve made by the Bishop-Babcock Becker Co. It is an adjustable valve- not sure if it is for brewing. Or steam, or what. It has a patent date of Oct 4th, 1898, and is marked: G 61283. What a beautiful piece of engineering and machinery. It measures about 11 1/4' tall overall. The inside diameter of the gauge is 3 1/2' It sure looks like it's in very nice condition. It weighs about 5 1/2 pounds before packaging. I have no way of testing this gauge. Please e-mail with any questions. Shipping will be US priority mail $ 12.00 to the winning bidder. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B0a7%3E-148aa460899-0x107-
|
|
|
Five(5) towers. All for one Money.used. If you buy and need more equipment, like bent tube, faucet, collar, etc. check my store: Fred's Offerings. Offering the lot for: $159.39 No shipping! 1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28b0g%60%60%3E1-148aa4608b0-0x107-
|
|
The Turbo Tap is a very ate yes retrofit draft beer dispensing device made from high-grade stainless steel that slips over the end of a standard U.S. beer faucet. Due to its advances designer the Turbotap uses fluid dynamics principles to modify the natural flow of beer coming out of the faucet in such a way that flow turbulence is minimized and in conjunction with the bottom of the glass fill method. The foam collar is consistently a perfect 1/2" to 1" thick. These factors result in a fill rate that can consistently beat 4 seconds per pint, minimizing waste and pouring a good looking and tasting beer. This is the 475SL model, which is the middle size of the three. I purchased off of EBay and they did not fit our beer taps. The previous owner said he purchased these for a him kegerator ... moreand never used. This auction is for TWO Turbo Taps. note: one tap is missing set screw- this is how it came to me. The previous owner said you could probably purchase at a hardware store like Lowes. Shipping and handling is $5. Please bid with confidence! dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-148b223d02d-0x10a-
|
|
HI THANKS FOR YOUR INTEREST ALLSSGOOD RETAIL STORE AND ONLINE SALES IF EVER ANY PROBLEMS PLEASE CONTACT ME THRU EMAIL OR CALL 705-737-9393-BEER TAPS- 1300+++ ITEMS LISTED I HAVE MANY GREAT ITEMS TO SEE.COMBINE AND SAVE all reasonable,MY GOAL I TO HAVE HAPPY CLIENTS AND HAVE MANY GREAT NEW ITEMS AT ALL TIMES SUBSCRIBE TO MY NEWS LETTER AND GET UPDATED ABOUT NEW ITEMS LISTED Our buy it now price is our preferred price, however we strongly encourage you to make your offers! I THANK YOU VERY MUCH FOR YOUR TIME AND SUPPORT returns-Your satisfaction is important to us. I strives to accurately list and photograph every item we list for sale so that bidders can buy with confidence! I TRY AND ANSWER ALL QUESTIONS AND THANKS YOU AGAIN FOR ALL INTERESTS. Therefore, we only accept returns if the item ... morewas not as described in the auction. All items are sold As Is. LAYAWAYS ACCEPTED 20% OF COST OF ITEM DOWN: 3 MONTH TERM I HOPE YOU HAVE A GREAT DAY PLEASE BID http:stores.ebay.ca/allssgood 006.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%600d72f%2B%3E006-148ba169765-0x114-
|
|
|
C heapest price on eBay! F REE SHIPPING
|
|
|
EXCELLENT USED CONDITION- Typical light wear. Nothing major, very well taken care of. Tap looks Amazing! SUPER RARE! VINTAGE SALZBURGER STIEGL GOLDBRAU CERAMIC/PORCELAIN 27" DRAFT BEER TOWER TAP. Please email any questions. I will respond right away" SUPER FAST AIR SHIPPING- COMMUNICATION AND CUSTOMER SATISFACTION IS ALWAYS# 1 WITH US!
|
|
|
A 6 inch beer shank with an older faucet. Faucet is untested but has been broken down and cleaned. Faucet has lots of sratch marke. Posted with
|
|
|
Up for auction is this very unique and early brass beer tap probably 1880 S 1890 S looks to be like working condition. What a great piece for your bar room or man cave
|
|
|
Integrated Kool-Rite module for optimum cooling Integrated drip tray with drain and radius corners Removable front panel for easy access 4" hole in the bottom for glycol cooled trunk line setup
|
|
|
Heineken commercial grade beer tower and double taps
|
|
|
Up for sale is a 8 tap beer faucet tower. It is brass and it is vintage from the banner equipment company. It has 8 chrome beer dispensers. Buy it now and save
|
|
Up for auction is a pair of standard beer faucets each including a shank w/mounting hardware and connection equipment. They are older and have seen some wear as seen in the photos. But they are fully functional and the seals were replaced and have seen use only a handful of times since. These would be perfect for a jockey box or mobile kegerator, but I don't know how well they would work with everyday use. Mounting hardware and connecting hardware is included, just hook it up with some hose clamps up to your draft beer line. Included in this lot are: 2- Standard chrome plated brass draft beer faucets with newer seals 1- 5" Chrome plated brass shank w/ 5/16" bore 1- 5.5" Chrome plated brass shank w/ 3/16" bore 1- black plastic flange 1- stainless steel flange 2- chrome ... moreplated nipples w/ 3/16" bore 2- black washers 2- shank nuts Shipping is via Priority Mail Small Flat Rate Box to anywhere in the US. Please contact me for questions or other shipping methods and destinations.
|
|
A VERY cool"Hires Root Beer" Barrel/Keg/Beermister. The Barrel looks to have all the necessary hoes& fittings to be hooked up and function. There seem to be cooling cylinders on the bottom to fun(Could use a good cleaning) This Keg would make a GREAT addition to any home bar or"ManCave" and can be filled with whatever you like. Soda, Beer, Etc, Etc) If you're looking for a really awesome accent to a bar or home this Hires Keg is worth while. Ive Seen others on Ebay but none in this good condition. SIZE: 30" Inches Tall X 24" inches wide SHIPPING: Shipping is no issue for me. I work with lots of shippers who are insured and professional. The service is quick and professional. All I need from you when it comes to shipping is the address of the delivery and ... morethe location(Location means. To your front door, or up three flights of stairs) If you've never bought anything on Ebay or the Internet that depends on Delivery. I'm here to make the process as simple and painless as possible. Feel free to look at my other Ebay sales and see the satisfaction my customers have had in dealings. Local Pickup are also available and im more then willing do whatever is necessary to put you at ease. In order to get a Shipping Quote. Please MESSAGE me your Zip Code and let me know if it's going up any flights of stairs.
|
|
|
Stainless steel beer draft tower with drip tray. Collars, and faucet Chudnow single gauge co2 regulator domestic d keg coupler
|
|
|
This is a used Olmstead single faucet stainless steel beer tower with a down tube for connecting to your coupler. It features a used flow control faucet for controlling beer flow. This is also a stainless steel item. This is a good working used unit that will provide years of service. Thanks for looking! Check out my other items for sale.
|
|
|
This Antique Solid Brass Beer Tap is in great working order and was made by the"MUTUAL BEER PUMP COMPANY" It is 8 1/2" Long and 6" High to top of knob SHIPPING IN USA IS FREE Return for any reason. Buyer to pay return shipping
|
|
|
Very nice 4 tap head system Nice condition with only some minor scratches and dings Nothing that would cause a problem with the it works Attaches to the underside of the bar 26 Inches wide Ships from zip code 14120
|
|
|
HUGE 3 head tower with drip tray Now this tap Head really makes a statement about your bar Because of the extra lines coming out of the tower we believe it is Glycol Cooled However we do NOT have the cooling unit You will need the tap Handles In very good condition 27 inches tall and 19 inches wide Drip tray is 24 inches wide and 16 inches front to back and 1 1/2 inches deep This unit weighs in at a whopping 33 pounds New this system without the cooler ran $975
|
|
|
Nice solid reconditioned tap tower. Was purchased pre-owned and used only a few times. Some signs of previous use. No dents. Heavy duty. Includes round ball handles and screws to mount. NO HOSE or CONNECTORS Will Ship Fast
|
|
|
Nice single head tower In very good condition You just add the tap handle 14 inches tall and 4 inches in diameter
|
|
|
Nice double head tower In very good condition You just add to tap handles 14 inches tall and 4 inches in diameter
|
|
|
Up for auction or buy it now. Is a Perlick Century ceramic and brass beer tower. It has 4 faucets and is ready for glycol. These sell for $1400+ brand new, but I am selling it at about a third of that price. It will come as it is seen in the pictures. There are 2 vintage beer tap handles attached, that I will include. It is a really nice system and a good look. Any questions, message me.
|
|
|
Used from working environment In good condition. No major scratches Has glycol tubes
|
|
For your consideration is a Authentic vintage British pub-style cask ale beer engines formally used at a local pub in England. Item was shipped along with large hand painted pub sign which is also available. Beer engine is mountable by screw clamps as depicted up to two inches thick. Weight is approximately 26lbs. without packaging. Beer engines composed of brass with porcelain handles and stainless steel guard and drip pan holder bracket. Plastic drippan did not come with beer engine nor tubing which would need to be replaced anyway if using. Have tried engines out and they do pull liquid from pail. These are authentic cask english beer engines with highly polished brass and porclein handles a remarkable show piece for any home bar, microbrew, or display and would add that special touch. ... moreItem measures 27" tall x 14"back to front with bracket& 15"1/2 W. Item will ship fed-x ground being cheapest approx $28. or shipping of your choice. This might very a little depending on location. Item does need a little TLC one handle has chip on top of porclein draw handle and need new rubber rings between brass and porclein as shown in pictures. Minor repair. Please look at pictures for condition as this is item you will receive. Had three and this is last one. Item is sold as is unless misrepresented and trying very hard to show and tell anything there is mechanically or cosmeticly wrong and want you to be satisfied. This is a vintage beer engine and does draw as stated. If you have questions please contact me and I will respond promptly. Thank you for looking `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-148ecf54c70-0x110-
|
|
|
Olmsted Hicksville NY Commercial Beer Tap that mounts to a bar. Heavy Duty Stainless Steele will shine up nice! Nice Chrome- made in the USA! Big step up for the man cave or great deal for your neighborhood bar! Now all you need is CO2 and a couple of kegs!
|
|
|
This is a 20 Tap diamond plate beer draft system. This system includes a special nitrogen tap for Guinness. Includes a digital draft monitoring system that integrates with your POS system keeping track up to 1/100th of an ounce. This system includes the 20 tap heads. The 20 taps, the 20 gauges, the draft manifolds, the PC controller, includes literally everything that you need for 20 kegs, the only thing that you need is one roll of hose that you can get at any hardware store for $100. As you can see in the pictures this is an exhausted system. This system is worth over $25,000.00. You can not even get a draft system digitized for the amount that I am selling all of this for! DON'T BE SHY MAKE ME AN OFFER. Have any questions call Andrew at 208-610-5196. Will ship on a pallet.
|
|
Vintage Thomas Beer Barrell Barrel Draft Pump Excellent LDB111 Description: LDB 111) Vintage Thomas Beer Barrell Barrel Draft Pump Excellent. Payment: We currently accept PayPal only for payment. Shipping: We ship almost anywhere. Just ask for a shipping qoute to your address. Terms of Sale: Larger items that are for sale via Local Pickup Only are Local Pickup Only unless buyer is willing to arrange for freight pickup and packaging charges. Buyer arranges for pickup and accepts all responsibilty for item after it leaves our store. I do not process refunds for"impulse" buys. Be sure that you want what you are bidding on. Refunds are only issued if item has been mis-represented in any way or if a piece was damaged during shipment. Buyer must provide photos of any damage so that we ... moremay present those to the consignor who offered the piece. Many times. A return will be requested, depending on the item, because we mark(invisibly) every item that goes out for delivery so that we know, if there is a return, that it is the same item that was initially sent. I know this sounds"over the top" but the few people out there making a living from"scamming" people have made it difficult for us honest people. Since we do operate a retail facility. All items are subject to prior sale. We try very hard to remove the sold items from our listings as soon as they are sold, but again, we are human and sometimes do make mistakes. We sell a LOT of glassware and are very careful about the packaging of it. We use a LOT of bubble wrap. There is. Included in shipping charges, a small percentage to help offset the cost of packaging materials. About Us: We are an ebay consignment store. We try to do as much research as possible on the items that we are selling. But we are in no way experts. If you have questions, please ask and we will be more that happy to answer to the best of our ability. If we do not know the answer, we will tell you. Contact Us: If there is any problem with an item that you have received. Pleas
|
|
|
This is a slightly used stainless steel faucet from Ultra Flow. It is similar to the Perlick 650 SS faucet but preforms better with it's slide design. This faucet will provide years of good service. Thanks for looking! Check out my other auction items.
|
|
|
Up for auction is a pair of Tap Rite keg pumps. They appear to be in good working shape. I dont have a keg to test them on. But they did build pressure if you held your hand over the end and pumped. SATISFACTION GUARANTEED with a one week return period. Buyer pays shipping and insurance both ways if needed. Shipping will run $12.50 USPS in the continental USA.
|
|
|
Used faucet has brass internal lever. Cleaned it up best I could. Works fine.
|
|
|
Krome Flow Control Beer Faucets- Lot. 24 Faucets `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-1490631d51a-0x108-
|
|
|
Only Used to Dispense a Few Corny Kegs* Perfect Condition Seals appear to be in good condition, No Dings. Scratches or Signs of Wear, Accepting PayPal Only* 1016; 1of4)
|
|
Selling as found this Perlick Tap comes with its original box and instructions. 26000D2 It does not look like the tap has been used. The tap measures about 7 inches long. box shows some wear from storage. PLEASE READ DETAILS TO REVIEW MY GENERAL SELLING POLICIES*FEEL FREE TO EMAIL WITH ANY QUESTIONS. BUT PLEASE SO THAT THERE ARE NO MISUNDERSTANDINGS ALL I ASK IS THAT YOU PLEASE DO SO"PRIOR TO" BIDDING OR BUYING, SO THAT I MAY ADDRESS ANY QUESTIONS OR CONCERNS YOU MIGHT HAVE BEFORE FINAL SALE AS I DO NOT ACCEPT RETURNS* This is not a pet free smoke free home! Although items are kept in separate apartment please keep this in mind when bidding! If there are problems of any nature. Please contact me before leaving anything less than a positive feedback. I try to describe items to the ... morebest of my ability. Most of what I sell are vintage items and there is usually wear associated with age and use. Items may need cleaned unless stated otherwise. I am not an expert and encourage questions! I love mid- century décor and enjoy being able to give others a chance to decorate from a totally cool era!
|
|
|
For sale. Is an authentic brass, forced air draft system. 6 lines with trunk line and drip tray included. Some minor paint marks on back of unit; as it was against a wall. Unit was maintained and cleaned twice a month. Please message me with other questions. T ap handles are not included
|
|
|
3 Faucet Brass beer tower. Great for any Sports Bar! `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-149063399af-0x115-
|
|
|
Really nice 6 tap tower from the bar at The Governor's Inn in Raleigh that closed this year. Included is a drip tray with drain that is not in as good a shape as the tower but still looks nice and is fully functional. I obtained it to build a keezer but my wife convinced me that a freezer for 6 kegs would be a bit overkill. Great buy for the right person.
|
|
|
This auction is for a very nice single head direct draw draft tower w/ chrome finish and stainless steel lever. Manufactured in Texas by Taprite. This item was used as a prop for a TV show, and as such was never hooked up, or used. It is in essentially like new condition with no marks or scratches. Please see my other auctions for identical single head taps D4740: NSF Approved, Spout to Flange, Connector, 3/16" I.D. x 50" Exposed Vinyl Tubing w/ Wing Nut, Faucet Head, Chrome w/ S/S Lever, Finish, Polished Chrome- NSF,
|
|
|
This auction is for a very nice double head direct draw draft tower w/ chrome finish and stainless steel lever. Manufactured in Texas by Taprite. This item was used as a prop for a TV show, and as such was never hooked up, or used. It is in essentially like new condition with no marks or scratches. Please see my other auctions for identical single head taps D4743DT: NSF Approved, Spout to Flange, 9 1/4" Connector, 2- 3/16" x 50" Exposed Vinyl Tubing w/ Wing Nut, Faucet Head, 2 Chrome w/ S/S Lever, Finish, Polished Chrome- NSF,
|
|
|
We bought 20 of them but only have 16 taps here at the Wooden Foot Saloon in Waverly. IA. They work great and have increased our keg yields by almost 10% Good luck and Happy Bidding! dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-14915548847-0x113-
|
|
|
UP FOR BID IS THIS LIGHTLY USED STORED SINGLE TAP TOWER DISPENSER VERY NICE AND A LOW PRICE PLUS YOU GET A FREE COORS TAP HANDLE WITH IT FEEL FREE TO ASK QUESTIONS AND THANKS FOR LOOKING
|
|
Just might be one of a kind! All Brass Goal Post 6- Tap Draft Beer Dispenser. Vintage early- mid 20th century tavern or bar tap from an"old-timers" bar in. Of course, the heart of Packer Country, Green Bay, Wisconsin! A Collector's Dream to Be Sure! Six original brass taps stand atop the goal post cross bar. The tap has a beautiful aged patina that could be the center piece of any serious enthusiast's collection or bar. The very left tap will need a fitting. The"Old Style" beer tap handle is not included. It stands approximately 25" tall X 38" wide X 12" deep. Approximate weight is 22 lbs. Please view photos and feel free to contact me. Standard shipping to lower 48 states is $59.00. Will ship free to lower 48 states if winning bid is at least $400.00. ... morePayPal Only.
|
|
|
Offered is a used Draft beer tower with 5 spouts. This unit is working and was taken out of a bar. The unit comes with drip pan. The only blemishes that do not affect the operation of this unit is on the lid and one of the taps. The tap is missing a brass piece just below the handle(pictured) The lid has a few cracks(pictured) Unit is working and is in good shape. Unit will be disassembled for shipping. Please see photos for details. Buyer pays all shipping costs. International shipping available. Please contact for international shipping quote. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-1491ccdef52-0x113-
|
|
This price includes 5 Turbo Taps THAT IS LESS THAN $75 PER TURBO TAP- BEST PRICE ON EBAY The TurboTap is a patented retrofit draft beer-dispensing device made from high-grade stainless steel that slips over the end of a standard U.S. beer faucet.TurboTap comes in three sizes to fit various draft beer tower configurations and glass configurations. Due to its advanced design. The TurboTap uses fluid dynamics principles to modify the natural flow of beer coming out of the faucet in such a way that flow turbulence is minimized and, in conjunction with the bottom-of-the-glass fill method, the foam collar is consistently a perfect ½” to 1” thick. These factors result in a fill rate that can consistently beat 4 seconds per pint, minimizing waste and pouring a consistently good-looking, good-tasting, ... morebeer. This is the 375 model, which is the shortest out of the three. Brand new device, never used, never installed, shows minor signs of wear, this was how I received them from the Turbo tap distributor, never used them, great addition to your bar equipment.Cut your spillage and pump up your sales,this thing will help your business for sure. As recently shown on TV show BAR RESCUE,check out all the videos online, buy now for the fraction of what being sold on official turbo tap website. These taps were purchased from one and only official Turbo Tap seller in USA.
|
|
|
This glycol system is in excellent condition. It comes with 12 regulators and 10 beer taps. The unit has 1 pump.
|
|
|
2 Turbo Tap Beer Savers 475SL Model. Items are in good working order but used. Get them now for a cheap price. Lower 48 only, no returns please. `4`.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E%604%60-149244cc3a2-0x108-
|
|
Welcome to Oldnnew-sellitall-bignsmall eBay store! PLEASE READ EVERYTHING. Check out my other listings. You are bidding/looking at what you see in the picture. Title, and as described. Please use the pictures, close up features, condition descriptions(if any) to your best judgment. If you have any questions. Please feel free to ask, Thank you for looking and ENJOY! Happy Bidding! I combine Shipping and Handling. Prices of combined shipping varies depending on the item. Small size lots and bigger items are roughly 40-60 percent off on the lower S&H charges. Charges for single cards and small lots will not exceed 6 to 8 dollars(depending on size and weight) Please let me know beforehand if you plan on getting more than one items/lots. I can do within same day to same week with multiple items ... morewon within this time frame. Need more time? Let me know! Most of these items are shipped in bubble wrapped envelope with tracking number. Secured and fast shipping, unless otherwise posted and described. Sometimes I use recycled materials. International bidders/buyers are to let me know before bidding about S&H quotes! Some places I will have a signed delivery confirmation to protect both the seller and buyer. It varies from locations and countries. Thank you. Returns- I will accept returns to the full amount if there are any errors in the transaction(s) However. If you change your mind, then returns are accepted under the condition that any S&H will be subtracted from the total purchase, with or without items having any S&H charges or not. Check it out! I have many other items. Sports cards sets, single inserts and base cards, vintage/modern items, and more! Check out my other track lots/items up for auction. I combine shipping so add us to your favorites list because this is just the beginning! Payment- Non-paying items after 4 days will automatically open a case for non-payment. Item. After 4 days can be re-listed, re-offered to second winning bidder, or not listed, So if you're serious about items you ar
|
|
|
heres a Commercial Draft Beer Dispensing Perlick Line Chiller Model 4204 PRUL. This is from a business that closed, it was a working unit prior to removal, i can ship but please read details below regarding shipping I CAN SHIP SPEEDE DELIVERY TO THE FOLLOWING STATES NEBRASKA MINNESOTA IOWA WISCONSIN SOUTH DAKOTA NORTH DAKOTA OR ILLINOIS FOR A COST OF 50.00 IF YOU NEED IT SHIPPED TO ANY OTHER STATE IT WOULD NEED TO GO FREIGHT. SO YOU WOULD NEED TO ARRANGE YOUR OWN SHIPPING AND PAY YOUR SHIPPER AND HAVE THEM PICK UP AT MY WHAREHOUSE, I CAN LOAD ON SKID WITH FORKLIFT NO PROBLEM, ANY OTHER QUESTIONS PLEASE ASK,THANKS NO INTERNATIONAL SHIPPING
|
|
|
You are checking out a gently used bottle tree for home brewing or wine making. It is made of solid plastic and can hold up to 45 bottles. Be they wine bottles or beer bottles to help them drain and dry after you've cleaned them out. You can add more or less of the tiers on it as well, so if you don't have so many bottles just pull one or two of them off and you'll have less unused spots. This NO RESERVE auction should get you that one last bit to add the finishing touch to your home brewing or home wine making setup, so why not throw in a bid now before it gets too high? Thanks for checking it out, good luck, and happy bidding!
|
|
|
A 6 inch beer shank with an unused perlick faucet. This faucet does have a couple very minor Knicks on it but internally looks not to have been used. Finish is still very nice and Knicks are minimal. Posted with eBay Mobile
|
|
|
PERLICK 8 Faucet Polished Chrome Draft Beer Tower- Glycol Ready. Wide Base Tee Tower- Comes with Drain- Glycol Ready Tower was recently removed from a local beer bar to upgrade to a larger unit. Unit comes with 8 Perlick 425 faucets(taps) Unit has never been opened and the factory insulation is in place in the top section.
|
|
|
THANKS FOR LOOKING. SOLD AS IS AS SEEN.
|
|
This auction is for a Olmstead Products beer tap dispenser. Includes hose. But needs the faucet. Has a sticky residue on side, probably from a sticker, looks like it would be easily removed. Another great find. I search and explore estate sales. Flea markets and antique stores. Almost all of my items have been preowned. All of my items are described to the best of my ability. I am not an expert on all items I sell. If I missed anything it was not my intention. If any questions or more pics needed please ask before bidding. Please read entire description and review all pictures as they are also part of the description. Winning bidder is expected to make payment within 3 days of auction ending. If payment is not received in 4 days an unpaid item case will be opened automatically, unless prior ... morearrangements have been made. Please feel free to ask any questions. If you feel I have SIGNIFICANTLY misrepresented an item, please contact me so we can work out a friendly solution that's acceptable to us both. I pack my items very well, but sometimes things still get broke. If free shipping is listed this does not include international. Tracking is included on all of my packages. BE SURE TO VISIT MY EBAY STORE FOR MORE ITEMS! I strive for 5 star positive feedback. Please use the star rating. It helps me in my seller rating and discounts. I try my best to offer the best service for my buyers. Please message me via eBay before leaving negative or neutral feedback. Let's solve the problems together! Thanks!
|
|
|
Stainless Single Tap Draft Beer Tower with two integrated copper cooling lines. Includes Faucet
|
|
|
This is a used 2-line cold plate that can be used for homebrew or commercial beer kegs through a"jockey box" style setup. Or in home draft system. The cold plate comes completely cleaned and sanitized prior to shipping.
|
|
|
i have(2) single faucet beer keg towers. Need to be cleaned up a little(see photos)
|
|
|