|
|
Order by: |
0 bids Free Shipping
Condition: Used Location: Pueblo, United States
Parker Compumotor OEM650RC. The OEM650RC drives are compatible with Mach3. These are very high-performance stepper drivers with. Microstepping Motor Driver. breakout boards that use step / direction signals.
Buy It Now
Free Shipping
Condition: New Location: , United States
It has high compatibility with all the 2-phase, 3-phase and 4-phase microstep drivers and stepper motors. About the 3rd Generation Breakout Board Set. Synchronous coordinates display on computer and display panel, up to 4 axis (X, Y, Z, A axis).
0 bids $5.00 Shipping
Condition: New Location: , China
● One-piece integrated drive. ● Y-axis dual drive, stronger drive capability;. ● Support USB automatic identification, when plugged in USB and connected to the computer, the offline interface is automatically shielded to avoid offline interference with data;.
Buy It Now
Free Shipping
Condition: New Location: Livermore, United States
5 programmable digital outputs available for tool enable, tool direction, flood, mist, and fault outputs. S-Curve path planning. 10 programmable digital inputs available for limit switches, probe interface, and estop.
0 bids Free Shipping
Condition: Used Location: Manassas, United States
These drives work well with Mach3 and UCCNC software. All four units have been fully tested with a PacSci PMB22 servo motor (see short video). They accept 90–235V AC input, single or three phase. One unit is used but the other three were kept as spares so basically they are like new.
Buy It Now
Free Shipping
Condition: New Location: , HK
1 5 Axis Breakout Board + 3 EMA2-080D72 Microstep Motor Drivers. 5 Axis Breakout Board. ™ digital hybrid stepper driver is a high performance Microstep Motor Driver adopting32-bit DSP, pure sine wave subdivision technology.
Buy It Now
$10.50 Shipping
Condition: New Location: , China
It is used to run the signal processing of the host computer ( LPT port ), with MACH3 CNC system software, and the peripheral machine dynamic electrical. It is suitable for CNC engraving machine, CNC lathe, CNC plasmacutting machine, laser engraving machine, CNC milling machines, machining centers and other machine tools.
Buy It Now
Free Shipping
Condition: New Location: Rosenberg, United States
Adopt 6N137 high-speed optical lotus root to ensure high speed without losing step, suitable for 42, 57, 86 two-phase/four-phase/four-wire/six-wire stepper motors within 4.2A. Subdivision: full step, half step, 1/4 step, 1/8 step, 1/16 step, maximum 16 subdivisions.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
10in of 13mm (600v 125c) temp rated heatshrink (single wall for flexability )(T his is to build your VFD's end boot that goes around your leads). This cable is rated to300v, and 105 degrees Celsius (221 degrees Fahrenheit) This cable is designed for your spindle to VFD connection to protect your CNC system from EMI penetration.
0 bids Free Shipping
Condition: New Location: , United States
Using the minimum error interpolation algorithm, combined with the maximum step pulse frequency of up to 100KHz, no matter the servo motor or the stepper motor, high precision machining can be achieved to ensure the ultimate machining accuracy.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Set Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: Elk Grove Village, United States
Buy It Now
$4.88 Shipping
Condition: New Location: , China
1 x 5 Axis CNC Breakout Board. Output port P17 mouth. Can be accessed by a common cathode or common anode input level to 5V drive. (USB cable not included). Output port P1 port. This item is for what use.
0 bids Free Shipping
Condition: New Location: , China
Supports: For GRBL Contol or Candle (3 axes); for Grbl. SHORT CIRCUIT ION FUNCTION: Cancel the drive module, use an integrated imported stepping motor drive, with short circuit ion, integrated heat dissipation aluminum alloy.
Buy It Now
$5.00 Shipping
Condition: New Location: , China
For Windows: All Mach3 CNC. - Maximum axis: 4 axis. - Using 433MHZ, ISM wireless FR transmission technology, transmit power 10DB, receive sensitivity -98DB. - 1 x WHB04B wireless electronic hand wheel.
Buy It Now
$8.00 Shipping
Condition: New Location: , China
Only support Ethernet interface. - Support 10m/32.8ft Ethernet interface cable. - 1 x Ethernet Cable. - 1 x User Manual. - Support save data when power off. Usually it cost about 35USD-50USD.
0 bids Free Shipping
Condition: New Location: , United States
Using the minimum error interpolation algorithm, combined with the maximum step pulse frequency of up to 100KHz, no matter the servo motor or the stepper motor, high precision machining can be achieved to ensure the ultimate machining accuracy.
Buy It Now
Free Shipping
Condition: Used Location: 화성시, KR
MITSUBISHI 400W SERVO DRIVER.
Buy It Now
$6.99 Shipping
Condition: New Location: , China
The driver has the characteristics of low noise, low heat and high speed performance, and is suitable for any stepper motor below 2.0A phase current of the driver. Step accuracy: ±5% (full step, no load).
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
This is very large for a production robot. This inaccuracy difference could be virtually totally eliminated by using a longer scale which is up to the end users allowable machining tolerances based on their preferred products, and budget for buying a larger Accu-scale.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
DUAL Gecko Drive G540 digital integrated micro stepping 4 axes driver systems. Using two Gecko G540's allows for the two drives to function in parallel as one driver supporting up to 8 axes. I also include the matching resistors for the G540 .
0 bids Free Shipping
Condition: New Location: Rialto, United States
YAKO stepper motor driver,YKA2811MA for cnc machine.
Buy It Now
Free Shipping
Condition: New Location: Goshen, United States
Mach 3 Keyboard Shortcut decals. Great way to label your shortcut keys. Decals are printed on high quality 8 year outdoor vinyl with over laminate UV protection. Adhesive backed, will stick to clean smooth surface.
0 bids Free Shipping
Condition: New – Open box Location: Ventura, United States
We're down to earth, easy to work with people. Fast Dispatch Service.
Buy It Now
Free Shipping
Condition: New Location: , United States
(7) Current: 18A. HY inverters. 220V class:220V(+/-15%). 3) Input Frequency: 48-63 Hz. 4) Output Frequency: 0-400 Hz. 10) With perfect error protection and short circuit starting protection capability;.
0 bids $20.00 Shipping
Condition: Used Location: Groningen - Coendersborg, NL
Suitable for Mach3 CNC systems. The unit features a high-quality LCD screen display, multiple programmable macro keys, and axis selection functionality (X, Y, Z, A) for accurate and easy machine positioning.
Buy It Now
$19.00 Shipping
Condition: New Location: , United States
(The highest uniaxial output pulse is 500KHz and the pulse width can be adjusted. It supports the common stepper motor and servo motor. Pendant Handwheel. 11) Be equipped with MPG port and support digital display MPG as well as support the general MPG in the market.
Buy It Now
$89.00 Shipping
Condition: New Location: , HK
Cnc 2 Axis Lathe NEMA23 MOTOR 22kg. 2x NEMA23 2ph 22kg. cm Step Motor. TURBOCNC, KCAM, MACH3 etc. MIRCO STEPPER FOR 400 TO 25000 STEP PER TURN. 2x 4.2A Industrial Grade Mirco step Drive. Mirco step form 400 to 25000 step per Revelution.
Buy It Now
Free Shipping
Condition: New Location: , United States
It's NOT compatible with stepper motors with rated current below 1.5A or above 3A. Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors.
0 bids $5.00 Shipping
Condition: New Location: 中原区, China
500mW Laser Engraver Module Head for DIY CNC 3018 Pro Laser Engraver Machine. Offline main page, Y+ unlock. Offline main page, Z+Chinese and English switching. PWM pulse frequency duty cycle is adjustable, short press the main page Z+, Z- laser power/spindle speed.
Buy It Now
Free Shipping
Condition: New Location: Houston, United States
It’s easier to manually jog your machine on the fly and toggle your spindle on/off. Easily load your projects onto the included SD card and have them ready to go without the need of a dedicated laptop or computer.
0 bids Free Shipping
Condition: New Location: , China
This module has no programmable function, but built in a variety of fixed operation mode, the user can quickly choose the appropriate trajectory. Motor Pulse Frequency: 85K HZ. VARIOUS WAYS OF USE: Can be independently run as a module, can also cooperate with other systems, as a third party module to make up for the lack of motor output shaft.
Buy It Now
Free Shipping
Condition: New Location: , China
The computer connects to the UC300 via a standard USB cable.It’s the best to shiled the communication USB cable to ignore the interferences. 1 analog output port of 0-10V adjustable speed for spindle (can change to PWM output port);.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description: Industrial Mach3 Cnc Engraving Machine Controller Was Designed for Mach System Do Not Need to Install Any Software and Driver, Spring Can Be Stretched to 3 Meters Waterproof Design, Very Durable, Anti-dirt, Oil Spray Power by Usb Port Dimensions: 22 X 8 X 3cm Please Note: This Item Works with Mach 3 Only The Usb Self-check Light, You Can Type the " Scroll" on the Keyboard to Activate It. Directional Motion Control: X+, X-, Y+, Y-, Z+, Z-, a+, a- Feed Rate Control: F+, F- Jog Rate: J+, J- Spindle Speed: Speed up, Slow down Programming: E-stop, Cycle Start, Spindle on/off, Redo, Single Step, Original Point Package Include 1 * Remote Controller 1 * Cable.
Buy It Now
$18.00 Shipping
Condition: New Location: , United States
It is designed for use with the 2 phase hybrid stepper motor of all kinds with. 1 PC Stepper Motor Driver DQ2722MA, 110-220VAC, 7.0A, 200 Microstep. 1, Stepper Motor Driver DQ2722MA. The highest micro step is 60000ppr.
Buy It Now
$5.00 Shipping
Condition: New Location: , China
Stepper drive subdivision adjustable. X/Y/Z/A four-axis drive, Y-axis dual drive. Support for rotary axis. Product Specifications:4 Axis. Reserve 24V, 12V, 5V power output ports to facilitate the expansion of various functions.
Buy It Now
Free Shipping
Condition: New Location: , HK
1 5 Axis Breakout Board + 4 EMA2-080D72 Microstep Motor Drivers. 5 Axis Breakout Board. ™ digital hybrid stepper driver is a high performance Microstep Motor Driver adopting32-bit DSP, pure sine wave subdivision technology.
0 bids Free Shipping
Condition: Used Location: Morgan, United States
Servo Products Company impact 2 control cabinet. Driver boards installed for x, y, and z axis. There is an empty card slot for a 4th axis.
0 bids Free Shipping
Condition: New Location: , China
Cancel the drive module,use integrated imported stepper motor drive,with short circuit protection,and integrated heat dissipation aluminum alloy;. Add the fan port to force heat dissipation;. Improved USB interface: The original USB interface is patch soldering, transport collision and improper use, easy to drop, now changed to plug-in, very strong;.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
DS Flexion spindle cable DIY kit to assemble your spindle cable minus the solder. piece of 16AWG 4 leadDouble Shielded DS Flexion Robotics Grade Cable. This is the overview video for DS Flexion Cable.
Buy It Now
$24.95 Shipping
Condition: New – Open box Location: Madison, United States
The servo amplifier is specifically designed for use with CNC machines and is ideal for driving servo motors. Cards, Servo Drives, Spindle Drives, Motors, Motherboards and many other products for robots, CNC Power Supplies, AC/DC Industrial Drives, machines & Computers.
Buy It Now
$10.00 Shipping
Condition: New Location: , China
Press Z+ and Z-, the Z axis will move up and down. - Press X+ and X-, the X axis will move left and right. - Press Y+ and Y-, the Y axis will move Front and Back. We are the trustworthy supplier.
Buy It Now
$9.90 Shipping
Condition: New Location: , HK
IDEAL FOR CNC PARALLEL PORT SOFTWARE: TURBOCNC, KCAM, MACH3 etc. Current under 700mA Used Turbocnc or Mach3 phase driver config (MaxNc10 Config). DB25 connector. Maximum for 6 Axis. FREE with the PARALLEL PORT Cable.
Buy It Now
$3.00 Shipping
Condition: New Location: , China
Laser engraving: Support. Power Interface: 5.5-2.5mm DC interface. Connection: USB (USB-CH340). 1x USB cable. (Any stepper motor 42, 57). Stepper motor driver: A4988. Spindle PWM speed: Support.
0 bids $5.79 Shipping
Condition: New Location: , China
1PC MACH3 Interface Board. The output interface. The output interface is P1. Otherwise deal is final. Equiped with anti-reverse connection function. stop,tool setter, limit, ect for PC safety. 1PC USB Cable.
0 bids $12.90 Shipping
Condition: New Location: Hoffman Estates, United States
Easy plug and play USB to Parallel port adapter. Works perfectly with UCCNC, and Mach3, Mach4. doesn't require any complicated wiring. Works with for Mach3, Mach4, UCCNC software via plugin. Gender changing parallel port adapter, so you can use either male or female connections.
0 bids Free Shipping
Condition: New Location: , United States
Using the minimum error interpolation algorithm, combined with the maximum step pulse frequency of up to 100KHz, no matter the servo motor or the stepper motor, high precision machining can be achieved to ensure the ultimate machining accuracy.
Buy It Now
Free Shipping
Condition: New Location: , United States
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. ™ 3 Axis TB6560 Set Professional Driver Board Kit for CNC DIY. This3 Axis TB6560 Set Professional Driver Board is equipped with TB6560AHQ chip.
Buy It Now
$15.95 Shipping
Condition: New Location: Hoffman Estates, United States
1: 1pc Gecko G540 Driver. Gecko G540 Driver. The G540 is a complete 4-axis system which plugs directly into your computer via the parallel port and to your motors through DB9 connectors. It contains four of our G250 drives, our own breakout board and a hard anodized aluminum case.
Buy It Now
Free Shipping
Condition: New Location: , China
1 x 5 Axis Breakout Board (No manual). Output port P1 port. Output port P17 mouth. 1 x USB Cable. Can be accessed by a common cathode or common anode input level to 5V drive. Size : Approx 90 61 15mm.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Set Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: , United States
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Box Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: , United States
This3 Axis TB6600 Set Professional Driver Board is equipped with TB6600HG chip. It is specially developed for all the 2 or 4 phase Nema8, Nema11, Nema14, Nema16, Nema17, Nema23, Nema24, Nema34 stepper motors which are with higher current.
0 bids Free Shipping
Condition: New Location: , United States
We very glad to solve all problem with you. Sales Policy.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Signal input: single ended, pulse / direction Subdivision optional: 1/2/4/8/16/32 subdivision Output current: 0.5A-4.0A Input voltage: 9-42VDC (recommends 12-30V) The current is automatically halved at rest. Can drive 4, 6 and 8 Lead two-phase, four-phase stepper motor Optocoupler isolated signal input, strong anti-interference ability With overheating, overcurrent, undervoltage lockout, input voltage anti-reverse protection and other functions Small size, easy to install External signal 3.3-24V universal, no series resistor required Operating Temperature: -10 to 45 Degrees Celsius Storage temperature: -40 to 70 Degrees Celsius Chopping Frequency: less than 50KHZ.
Buy It Now
$5.00 Shipping
Condition: New Location: , China
5 Axis CNC Breakout board interface adapter board. 5 Axis CNC Interface board Breakout Board For Stepper Motor Driver Mach3 for CNC. 5 Axis CNC Interface Adapter Breakout Board For Stepper Motor Driver Mach3 w/USB.
0 bids Free Shipping
Condition: Used Location: Woonsocket, United States
This high-quality servo drive from Glentek is the perfect addition to any industrial automation system. With its reliable performance and precise control, it's ideal for use in a variety of industries. Whether you're looking to upgrade your current system or you're just starting out, this servo drive is sure to meet your needs.Featuring advanced technology and a durable design, this servo drive is built to last. It's compatible with a wide range of industrial equipment, making it the perfect choice for businesses of all sizes. So why wait? Invest in this top-of-the-line servo drive from Glentek today and experience the ultimate in industrial automation and motion control!
0 bids Free Shipping
Condition: New Location: , United States
Using the minimum error interpolation algorithm, combined with the maximum step pulse frequency of up to 100KHz, no matter the servo motor or the stepper motor, high precision machining can be achieved to ensure the ultimate machining accuracy.
Buy It Now
Free Shipping
Condition: New Location: , China
Maximum Pulse Frequency: 200KHz. Display: 7in 800 x 480 HD 16 million color high brightness LCD display. Disassembly is strictly prohibited. Electric shock can cause death. User Available Program Space: 256M electronic hard disk.
Buy It Now
Free Shipping
Condition: New Location: , United States
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. ™ 3 Axis TB6600 Set Professional Driver Board Kit for CNC DIY. This3 Axis TB6600 Set Professional Driver Board is equipped with TB6600HG chip.
|
|
|
|