|
|
Order by: |
0 bids $40.00 Shipping
Condition: New Location: , China
4Axis MPG Pendant Handwheel 5V 100PPR. - X, Y, Z, 4th axis selector switch. - Required 5V+, 150mA, power for MPG. It supports milling, boring, tapping, drilling and automatic feeding. - Wiring: User can wire this unit to the CNC system with easy.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
Piece of 18AWG 4 leadDouble Shielded DS Flexion Robotics Grade Cable. DS Flexion 18awg Motor Retrofit Cable Kit. Here's an overview video of DS Flexion Cable. DS Flexion Ultra Flex Double Shielded Robotics Cable Is Here!
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Set Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
Piece of 18AWG 4 leadDouble Shielded DS Flexion Robotics Grade Cable. DS Flexion 18awg Motor Retrofit Cable Kit. Here's an overview video of DS Flexion Cable. DS Flexion Ultra Flex Double Shielded Robotics Cable Is Here!
0 bids Free Shipping
Condition: New – Open box Location: San Jose, United States
New in the box never used.
Buy It Now
$18.00 Shipping
Condition: New Location: , China
The maximum output frequency: 40KHZ;. Programmable maximum number of rows: 99;. The status of the switch input signal output signal corresponds to the indicator light on the panel respectively. For the input quantity, the input low level (when the switch is closed) the light is on, otherwise the light is off; for the output quantity, when the output is 0, it is the low level, the indicator light is off, otherwise the light is on.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
DS Flexion spindle cable DIY kit to assemble your spindle cable minus the solder. piece of 16AWG 4 leadDouble Shielded DS Flexion Robotics Grade Cable. This is the overview video for DS Flexion Cable.
0 bids Free Shipping
Condition: New Location: 龙岗区, China
It can effectively solve the problem of air-assisted yellowing wood boards. Cutting/air assisted opening, engraving/air assisted closing can be realized. 1 × 32 bit auto air assist main board. Honor to serve you.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Buy It Now
Free Shipping
Condition: New Location: Ontario, United States
220v 2.2kw (3HP) VFD Specifications. higher horsepower vfd than your motor's. To protect the VFD, be sure to. rated current 10A (Represents the maximum current the VFD can withstand,this is a fixed value).
0 bids Free Shipping
Condition: New Location: Ontario, United States
220v 11kw (15HP) VFD Specifications. Applicable motor power ≤11kw(15hp). higher horsepower vfd than your motor's. To protect the VFD, be sure to. rated current 68A (Represents the maximum current the VFD can withstand,this is a fixed value).
Buy It Now
Free Shipping
Condition: New – Open box Location: Ontario, United States
The product may not have been used; it was only opened for a quick look.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
An actual built in EMI filter covered in the video below for the cleanest possible power output to provide your CNC robot with. That being said most switching power supplies simply feature a toroid passive noise filter which doesn't provide as efficient EMI mitigation as an actual EMI noise filter.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
Piece of 18AWG 4 leadDouble Shielded DS Flexion Robotics Grade Cable. DS Flexion 18awg Motor Retrofit Cable Kit. Here's an overview video of DS Flexion Cable. DS Flexion Ultra Flex Double Shielded Robotics Cable Is Here!
Buy It Now
Free Shipping
Condition: New Location: , United States
3 PCS Wantai Nema 23 Stepper Motor Dual shaft ,57BYGH115-003B,3A, 428oz-in holding torque. The DQ542MA is an economical microstepping driver based on patented technology of Wantai Motor.It is suitable for driving 2-phase 4-phase hybrid stepping motors.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Set Professional Driver Board is equipped with TB6560AHQ chip.
0 bids Free Shipping
Condition: New Location: Ontario, United States
Suitable motor: ≤ 15KW（20hp）. 220v 15kw (20HP) VFD Specifications. Applicable motor power ≤15kw(20hp). higher horsepower vfd than your motor's. To protect the VFD, be sure to. Rated Current:68A (Represents the maximum current the VFD can withstand).
Buy It Now
Free Shipping
Condition: New Location: Rialto, United States
RichAuto DSP A11. (1) DSP Handle (1) 50 pin cable. differential signal. Drive System. X5：Driver alarm signal input. Y5(S4)：Alarm LED. X1:X_se：X origin sensor Signal Input. X4:CutterTool-setting sensor signal input.
0 bids $5.00 Shipping
Condition: New Location: , United States
Application Mainly suitable for GRBL engraving machines such as 3018,3018-pro,3018-pro max,1610 pro or other CNC machines. Improved USB interface: The original USB interface is patch soldering, transport collision and improper use, easy to drop, now changed to plug-in, very strong.
Buy It Now
Free Shipping
Condition: Used Location: Buffalo, United States
This drive, as with all servo drives, needs to have jumpers set up to match your old drive, and the pots adjusted to match your old drive. This drive may be export restricted.
0 bids Free Shipping
Condition: New Location: , China
TC5540V is a new product based on the new TC55 upgraded software and hardware. USB: the system can be powered directly by USB cable, which is convenient for the. ● the size of the insertion opening: length× width 162×84mm, and the thickness of the front panel 4mm.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
Gecko G540 Overview Part 1 Users Manual Breakdown - YouTube. Gecko Drive G540 Integrated Digital 4 Axis Micro Stepping Driver System (REV8 2023 Edition ) 3Yr US Warranty with 4 DB9 male solder type connectors with hoods.
Buy It Now
Free Shipping
Condition: New Location: Ontario, United States
1X 5 Axis Breakout Board. Output port P1 port. Output port P17 mouth. 1X USB cable. 9, can be accessed by a common cathode or common anode input level to 5V drive.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Stepper Drive TB6600. In the user expects low cost, high current operation. Stepper Motor. Can drive 4, 6 and 8 Lead two-phase, four-phase stepper motor. Handheld Inkjet Printer. Signal input: single ended, pulse / direction.
0 bids $4.99 Shipping
Condition: New Location: Las Vegas, United States
This Arduino Nano CNC Shield 3-Axis DRV8825 Stepper Driver Board GRBL Machine Kit is a must-have for anyone looking to take their CNC projects to the next level. The kit includes all the necessary components to get started, including the Arduino Nano board, 4988 stepper driver board, and GRBL machine kit.
0 bids Free Shipping
Condition: New Location: Whippany, United States
MACH3 & parallel port software compatible. 2 × CNC breakout interface boards. Supports both common anode/cathode 5V motor drivers.
Buy It Now
Free Shipping
Condition: New Location: Orlando, United States
DDCS V3.1 is updated from DDCS V2.1 on software and hardware.It combines great power with a tiny footprint and is easy to use. The highest output pulse per axis is 500KHz. The panel layout structure of the DDCS V3.1 is very rational to save space.
0 bids $5.89 Shipping
Condition: New Location: , China
For two-phase within 42,57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is not suitable for more than 3A stepper motor. Automatic half current function. Rated maximum output: ± 3A, peak 3.5A.
Buy It Now
Free Shipping
Condition: New Location: , United States
4 x New 57BYGH56-401A Single-Shaft Stepper Motors 1.26Nm/175oz-in 2.8A. Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors.
0 bids $38.21 Shipping
Condition: New Location: , China
Turn on → Run key → External start key (or panel OK key) to rotate the indexing head. Equal division mode: 1-360 equal divisions. A. Mode selection (equal mode, angle mode, continuous mode). D. Total number of pulses (motor pulse count subdivision reduction ratio).
Buy It Now
Free Shipping
Condition: New Location: , United States
4.0A phase current. Hording torque when DQ542MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. 3 PCS Nema 23 Stepper Motor dual shaft with 428oz-in holding torque.
Buy It Now
Free Shipping
Condition: New Location: , United States
3PCS Wantai Stepper Motor Driver DQ860HA with 7.8A peak current ,24-80VDC ,256 Microstep，for Nema34 Wantai Stepper Motors. 1, Stepper Motor Driver DQ860HA. It is designed for use with 2-phase hybrid stepper motor of all kinds with 57mm to 110mm outside.
0 bids $5.00 Shipping
Condition: New Location: , China
Install GRBL 1.1 firmware. --Integrated 3pcs A4988 drivers, directly connect to four wire stepper motor. for Laser Engraving machine, Drawer Machine, CNC Engraving Machine etc. support XYZ axis, double Yaxis.
Buy It Now
$5.00 Shipping
Condition: New Location: , China
Support USB automatic identification, when plugged in USB and connected to the computer, the offline interface is automatically shielded to avoid offline interference with data;. Support USB flash firmware, firmware upgrade is more convenient;.
Buy It Now
$7.99 Shipping
Condition: New Location: , China
PWM output frequency 10kHz, higher engraving precision and clearer details. Support USB automatic identification, when plugged in USB and connected to the computer, the offline interface is automatically shielded to avoid offline interference with data;.
0 bids Free Shipping
Condition: New Location: Whippany, United States
Industrial-grade CNC command center designed for multi-axis machining systems. Incorporates optical isolation technology across all I/O channels to prevent signal interference. 2x CNC breakout boards.
0 bids Free Shipping
Condition: New Location: , United States
Using the minimum error interpolation algorithm, combined with the maximum step pulse frequency of up to 100KHz, no matter the servo motor or the stepper motor, high precision machining can be achieved to ensure the ultimate machining accuracy.
Buy It Now
Free Shipping
Condition: New Location: , HK
Suitable Microstep Driver 2 Phase, 3 Phase, 4 Phase Microstep Driver (M542/M542H/MA860H/3MA2290 etc.). 1 x 5 Axis Breakout Board. Electrical Specifications of Breakout board. Upgraded circuit, work more peacefully and steady than the previous version.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
The maximum output frequency: 40KHZ;. Program editing functions: You can insert, delete, modify the program. Programmable maximum number of rows: 99;. The status of the switch input signal output signal corresponds to the indicator light on the panel respectively.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Set Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: , United States
24V-50V DC 1.0-5.6A DM556 2-Phase Stepper Motor Driver 42/57 Stepping Motor Driver. Model: DM556. 1 DM556 Steeper Motor Driver. Application: 42/57 stepper motor. Optical isolation input signal, pulse response frequency up to 200kHz.
Buy It Now
$8.00 Shipping
Condition: New Location: , China
Axis: 1, 2, 3 or 4 (X, Y, Z, C). X, Y, Z axis can conduct linear interpolation, X, Y can do circular interpolation. It is an upgrading version of TC55. It is equipped with 16 input port and 8 output port, supporting importing G code files from USB disk and boot picture.
0 bids Free Shipping
Condition: New Location: Rosenberg, United States
This USB motion card does not need install any USB driver, Windows2000/XP/Windows7,can directly identify (Notice: Doesn't support Win8/win10/macOS system !).
Buy It Now
$5.00 Shipping
Condition: New Location: , China
Maximum pulse output frequency 50KHz (-axis simultaneous 50KHZ). - Freedom to select the input function: the limited input port can achieve a variety of user needs. - Input / Output (10MA 16 opto-isolated inputs and 16 opto-isolated output pull-down tank flow 500MA).
Buy It Now
Free Shipping
Condition: New Location: , United States
When the status display bar displays "??". 1x Connection Cable. Touch Screen 2.8” Touchscreen LCD Display. Connector Port 8 Pin. [USA Warehouse]. 1 x SD Card. Precautions for use. Suitable for.
0 bids Free Shipping
Condition: New Location: Los Angeles, United States
Supports connection of electronic handwheel. Supports 4 -axis linkage and can connect 4 stepper motor drivers or drivers;. The maximum step pulse frequency is 100KHz, suitable or stepper motors;. 1 status LED, indicating the connection status on the board.
0 bids Free Shipping
Condition: New – Open box Location: Ventura, United States
Model: DM542. MPN: DM542.
Buy It Now
Free Shipping
Condition: New Location: , Canada
DYN4 AC Servo Drive. 110~240VAC input. Pulse+Analog command mode. 3 axis 750W DYN4. 0.75~1.0kW servo motor pair 270.00 3 810.00. 8 CA-MO255-2H 2ft Molex 5pin / DB25 D-Sub Breakout Board to DYN4 AC Servo Drive 22.00 3 66.00.
0 bids Free Shipping
Condition: New Location: Ontario, United States
220v 7.5kw 10HP VFD Specifications. rated current 34A (Represents the maximum current the VFD can withstand,this is a fixed value). higher horsepower vfd than your motor's. To protect the VFD, be sure to.
0 bids $40.00 Shipping
Condition: New Location: , China
1 x 3 Axis TB6560 Stepper Motor Driver board. CNC stepper motor driver board TB6560,the new chip TB6560AHQ of TOSHIBA, the max ouput peak current can reach to 3.5A, this driver board can drive the 2-phase or 4-phase stepper motor whose current is less than 3A.
0 bids Free Shipping
Condition: New Location: Whippany, United States
The seamless offline operation feature allows you to work independently without relying on a constant computer connection, enhancing your productivity. The ability to connect an external 300w spindle drive expands its capabilities, making it suitable for complex and high - power projects.
Buy It Now
Free Shipping
Condition: New Location: Pasco, United States
X± Y± Z±: Moving Axis. How to increase the spindle power: After pressing the spindle button, press and hold the OK button and the Z+ button simultaneously to increase the speed. How to decrease the spindle: After pressing the spindle button, press and hold the OK button and the Z- button simultaneously to decrease the speed.
Buy It Now
Free Shipping
Condition: New Location: , AS
Nema 23 112mm Stepper Motor. 4 x Nema23 112mm Stepper Motor. Original Stepper Motor of PROVerXL 4030 V1. This ensures the smooth and efficient operation of your machine, providing you with a hassle-free and enjoyable CNC experience.
Buy It Now
Free Shipping
Condition: New Location: , United States
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6600 Box Standard Driver Board is equipped with TB6600HG chip.
Buy It Now
$8.00 Shipping
Condition: New Location: , China
Maximum axis: 4 axis. For Windows: AllMach3 CNC. - Using 433MHZ, ISM wireless FR transmission technology, transmit power 10DB, receive sensitivity -98DB. - LCD display. - Dot matrix LCD with backlight.
Buy It Now
$21.00 Shipping
Condition: New Location: , United States
1 x DDCS Expert. The DDCS Expert can be used for many styles and types of CNC machines. Pick&Place and Mills, lathe and cutters are just a few examples. The DDCS Expert operates as a. 5 Axis; 1M Hz output frequency for each axis; 2-4 Axis linear interpolation, any 2.
0 bids $18.50 Shipping
Condition: New Location: Clear Lake, United States
REMOTES AND PARTS. I DON'T KNOW IF THE IS THE MANUAL FOR THESE. THIS HAS A PWR36 HARDWARE MANUAL WITH IT.
Buy It Now
Free Shipping
Condition: New Location: , United States
3 x New 42BYGH47-401A Single-Shaft Stepper Motors 0.44 Nm/62 Oz-in/1.68A. Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors.
0 bids $4.99 Shipping
Condition: New Location: , China
6 Axis Mach3 5M USB HandWheel Pulse 100PPR Encoder Generator MPG Pendant. 3,The all macro files (in the CD inside macro folder )copied to. Mach3 macros under Mach3 Mill. 4,Wired MPG, turn on the power switch of the handwheel.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
Piece of 18AWG 4 leadDouble Shielded DS Flexion Robotics Grade Cable. DS Flexion 18awg Motor Retrofit Cable Kit. Here's an overview video of DS Flexion Cable. DS Flexion Ultra Flex Double Shielded Robotics Cable Is Here!
|
|
|
|