|
|
Order by: |
0 bids Free Shipping
Condition: New Location: , China
1PCS NEW FANUC SERVO Driver A06B-6096-H208.
0 bids Free Shipping
Condition: New Location: Ontario, United States
Use With Coleman 450XX/ 452XX/ 470XX/ 472XX/ 480XX/ 482XX Series Air Conditioners To Reduce The Starting Current Of The Compressor;. which is known to the State of California to cause cancer, and birth defects or other reproductive harm.
0 bids Free Shipping
Condition: New Location: Ontario, United States
〖Features〗 ❅ This frequency drive is made of high quality material, which is high accuracy and good performance. ❅ It has good anti-interference ability and greatly improves stability. ❅ With extremely strong anti-jamming capability, safely use for you. ❅ Simple to operate and wire, convenient for you to use. ❅ Fast start and stop response, can provide you with good using effect. .
0 bids Free Shipping
Condition: For parts or not working Location: Delta, United States
Category:Servo Drives and Amplifiers. Model Line:ECO-DRIVE. Gate Valves. Knife Gate Valves. Circuit Breakers. Valve Bodies and Manifolds. Heating and Cooling. Cooling Fans.
0 bids Free Shipping
Condition: New Location: Union City, United States
Item must be in original condition. 🔒 Why Choose Us?. Free compatibility consultation & installation guidance. ⚡ Fast Logistics. 🕒 8 Years Expertise. ✅ Lenze & Yaskawa. ✅ Beckhoff. ✅ Honeywell.
Buy It Now
Free Shipping
Condition: Used Location: Ponca City, United States
MODEL: 8200 Vector.
0 bids $19.00 Shipping
Condition: New Location: , China
100% Money Back.
0 bids $31.00 Shipping
Condition: New Location: , China
Speed mode, Torque mode. Relative humidity less than 80RH. Applicable to permanent-magnet, separate excitation DC motor and DC torque motor. Jinan lanjiu Electronic Technology Co., Ltd. was founded in 2017.
0 bids Free Shipping
Condition: Used Location: Louisville, United States
SURPLUS
Buy It Now
Free Shipping
Condition: New Location: Northwood, United States
Fused Disconnect Switch. New Allen Bradley 194R-J100-1753. UL Class J.
0 bids Free Shipping
Condition: New Location: Hebron, United States
0 bids Free Shipping
Condition: Used Location: Harrison Township, United States
Allen-Bradley 505-BOD Series C Size 1 Reversing Motor Starter. Good Used Condition, Functions Normally.
Buy It Now
Free Shipping
Condition: New Location: Fort Payne, United States
Pictures show the two parts assembled.
0 bids $127.19 Shipping
Condition: Gebraucht Location: Kiel, Germany
Lenze EVS9326-KHV531 00410158 KUKA 00-103-117 HW:01 SW:03 Umrichter18,5kVA. Lenze EMF2111IB-V531 00409933 Interbus S. aus einer bis zum. Sollte ein Gerät widererwarten defekt sein, sorgen wir für Ersatz (wenn verfügbar) oder erstatten Ihnen den vollen Kaufpreis.
0 bids Free Shipping
Condition: New Location: Orlando, United States
F1-A06B-6102-H226#H520.
0 bids $25.00 Shipping
Condition: New Location: Marietta, United States
XTCE150G00TD 24VDC DILM150(RDC24V).
0 bids Free Shipping
Condition: New Location: Oakland, United States
Allen Bradley. （Costs in the range of 100~150 USD）.
0 bids $15.00 Shipping
Condition: Used Location: Adrian, United States
Allen Bradley AB 3-pole, Size 3, 90A Contactor 500-DOD930, 120V Coil, as pictured. Came out of large control panels in a factory that was being demolished. Excellent used condition. The contact points are in average to above average condition. More sized and configurations in my other listings, will combine shipping when possible. Any questions, please ask!
0 bids Free Shipping
Condition: New Location: Walton, United States
PWM frequency: 12KHZ. It cannot be connected to AC power and cannot drive the brushless motor. Features: The on-board switch has the functions of running, stopping and braking. The output connection to the motor does not need to be divided into positive and negative.
0 bids Free Shipping
Condition: New Location: Oakland, United States
We will reply you in 24 hours and give your a satified answer. Quote real conditons of parts. Refurbished in box like new, new and original, copy new and used parts.
Buy It Now
Free Shipping
Condition: New Location: Washington, United States
Make: Allen Bradley Model: 800F-N3W LED lamp module, white Condition: Brand New Price is for 1 piece only Same Day Shipping by 6 pm EST
0 bids Free Shipping
Condition: Used Location: Lowell, United States
0 bids Free Shipping
Condition: Used Location: Ventura, United States
MPN: 250521. We're down to earth, easy to work with people. Fast Dispatch Service.
0 bids $40.00 Shipping
Condition: New Location: Lafayette, United States
A510-2025-C3-UE Teco Westinghouse VFD 25HP 3PH 230V 73A Nema 1 NEW
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
0 bids Free Shipping
Condition: Used Location: Jefferson, United States
Sales Policy WE ACCEPT CREDIT CARDS!
0 bids Free Shipping
Condition: New Location: Los Angeles, United States
Multiple Functions: Support automatic, manual, serial port communication control, can control 42/57 two-phase stepping motors directly or with stepping motor drivers, it is a dedicated operation control module for single-axis stepping motors. A variety of fixed operation modes are built into the module, and the user can quickly select the appropriate motion trajectory 9 Modes: The parameters of each mode can be set in advance, with the use of buttons, it is suitable for almost all occasions, with multiple modes such as forward/reverse/delay/cycle/self-locking/no lock/speed Save Function: distance/speed/delay/cycle times can save the settings after power off. It can run independently as a module or be used with other systems.
0 bids Free Shipping
Condition: New Location: Delta, United States
Circuit Breakers. Fuse Holder. Roller Chains. Plug Valves. Motor Drives. Motor Starters. Safety and Security. Electrical Enclosures.
0 bids Free Shipping
Condition: New Location: Hebron, United States
Pls Note:Our product is new factory sealed, but some barcodes and QR codes will be erased before Shipping. we guarantee that every product is brand new and original.We never sell renovated products. Our warehouse has a large amount of inventory. If you need to purchase in bulk, please contact us and we will provide you with the best quotation. Our products listed in eBay more than this, we offer 1734 1606 1746 1747 1756 1762 1763 1766 1768 1769 2080 2085 2090 20F 20G 2198 22A 22B 22C 22D 22F 25A 25B 25C 2711 2711C 2711P 2711R 2713P 440C 440G 440R 5069 5094 700 800T 440E 440K etc.
0 bids $49.00 Shipping
Condition: New – Open box Location: , AE
SURPLUS AMPHENOL. We are NOT Authorized Distributor of this item. NEW IN BOX.
0 bids $18.00 Shipping
Condition: New Location: , China
0 bids Free Shipping
Condition: Used Location: Chapel Hill, United States
(C6726 21Z)
Buy It Now
Free Shipping
Condition: New Location: , China
We will reply to you within 24 hours.
0 bids Free Shipping
Condition: New Location: Hebron, United States
Buy It Now
Free Shipping
Condition: New Location: Walnut, United States
Universal fit for 12V or 24V,supports high power,120W@12V,240W@24V. Rated Thermal Current:10A.
0 bids Free Shipping
Condition: New Location: Houston, United States
We provide 1-year warranty for all products. Rest assured!
0 bids Free Shipping
Condition: New Location: , China
0 bids Free Shipping
Condition: Used Location: Commerce City, United States
Model: Atv12h075f1. Make: Schneider - Altivar. SUM Computers Inc. Item Details .
0 bids Free Shipping
Condition: Used Location: , China
Easy & Secure. 100% Money Back.
0 bids Free Shipping
Condition: New Location: Colonia, United States
We usually fill the inside of the case with 3-5cm thick foam board to protect the parts. We will make custom wooden boxes for them. Allen Bradley.
0 bids Free Shipping
Condition: New Location: Hebron, United States
Buy It Now
Free Shipping
Condition: New Location: Bluffton, United States
Carburetor Kit for Briggs & Stratton 31P977-0449-E1, 31P977-0575-E1 Mower Engine. Carburetor Kit for Briggs & Stratton 21B807-0130-B1, 21B807-0130-G1 Mower Engine. Carburetor Kit for Briggs & Stratton 21B877-0127-B1, 31M977-0111-E1 Mower Engine.
0 bids Free Shipping
Condition: New Location: Dayton, United States
Buy It Now
Free Shipping
Condition: New Location: Bordentown, United States
Able to reverse the motor forward, two PWM input frequency up to 25kHZ;. can solder heat sink;. Double BTS7960 large current (43 A) H bridge driver;. 5V power indicator on board;.
Buy It Now
Free Shipping
Condition: New Location: Brighton, United States
Buy It Now
Free Shipping
Condition: New Location: Hainesport, United States
For Laser Engraving machine, Drawer Machine, CNC Engraving Machine etc. --Integrated 3pcs A4988 drivers, directly connect to four wire stepper motor. --Support the x/y/z limit switch, probe interface.
0 bids Free Shipping
Condition: New Location: , China
Ashley Automation. However, we will try our best to minimize it. Easy & Secure.
0 bids Free Shipping
Condition: Used Location: Detroit, United States
Enhance your setup efficiently. Servo Drives and Amplifiers. model: MITSUBISHI MDS-D-V1-20.
0 bids Free Shipping
Condition: New Location: , China
0 bids Free Shipping
Condition: New Location: 香港, HK
New in box.
0 bids Free Shipping
Condition: New Location: , China
Give us a change, you would know SINOPLC is best one-stop source. Xizi Automation Technology Co.,Ltd, founded in 2010, is a professional purchasing B2B & B2C tool in electronic components field. Can we get a wholesale price ?.
Buy It Now
Free Shipping
Condition: New – Open box Location: Louisville, United States
These are genuine. 16 Amp rated current.
Buy It Now
Free Shipping
Condition: New Location: Mesa, United States
When the saw is turned on, the soft start feature gradually increases the motor's speed, reducing the initial torque and preventing sudden jolts or kickbacks. Soft Starter.
0 bids Free Shipping
Condition: New Location: Edison, United States
New Sealed Allen Bradley 25B-B5P0N104 PowerFlex 525 AC Drive 0.75kW 1Hp
0 bids Free Shipping
Condition: New Location: Edison, United States
We take our reputation seriously.
0 bids $12.00 Shipping
Condition: New Location: Princeton Junction, United States
Quality and Service are our top priorities. We look forward to. Just ask and we can order more just for you. If you have any similar part numbers or need more quantity.
0 bids Free Shipping
Condition: New Location: South El Monte, United States
LS LG SV008iG5A-2. New In Box. We believe ourWide Product Range will be your selection. What should I do if the item quality is bad / does not fit ?. Where can I find a RMA ?. Sure thing. And we are more than willing to assist you any further.
Buy It Now
Free Shipping
Condition: New Location: Duluth, United States
PWM Regulation range:5-100%. - All kinds of dc lamp was dimming, all kinds of dc heater adjust the temperature. - Great for all kinds of general-purpose and have a DC motor speed with brush. - PWN Frequency : 200hz.
0 bids Free Shipping
Condition: New Location: 中原区, China
EM-GS4-075 3phase AC 440~480V soft starter; Power 75 KW, rated Current: 150 Amp. installation size: 247/131/Ф6. l Pump (Centrifugal). - Motor fan : use soft starter instead of conventional starter, to realize the smooth start.
0 bids Free Shipping
Condition: Used Location: South El Monte, United States
· Rexroth HCS01.1E-W0018-A-03-B-ET-EC-PB-NN-NN-FW. 1 x USED Rexroth HCS01.1E-W0018-A-03-B-ET-EC-PB-NN-NN-FW Servo Drive. Servo Drive. We believe ourWide Product Range will be your selection. Used & Tested.
|
|
|
|
Pneumatic Rotary Actuator PHD Inc. Ft. Wayne Model RGA RLS1 50 X 90 Used. Perfect Condition
|
|
|
HUMPHREY HPSA 10 X 1 ROUND PNEUMATIC ACTUATOR This auction is for one New Humphrey HPSA 10 X 1(HPSA 10X1-A) This unit is in excellent physical condition and will arrive in the condition shown. It comes with a 14 Day Guarantee against being DOA from receipt. This auction is for QTY 1. I have a total of 12 of these actuators(as seen in pictures below) these were installed in a custom jig but never put into production. Please email any questions.
|
|
SquareTrade © AP6.0 BIMBA 4 3/4" PANCAKE AIR CYLINDERS FO-024.75-LM-FREE SHIPPING You are bidding on a Magnetic sensing Pneumatic Bimba Double Acting. Single End Rod Pancake Air Cylinder, Model# FO-024.75-LM with 4 3/4 Inches of stroke, 9/16" Bore, and a 1/4" piston. Cylinder measures 6 3/4" High x 1 1/8" Diameter. Features Magnetic Sensing- includes sensor bar Force is.25 x air pressure Body- 304 Stainless Steel Heads- Anodized Aluminum Alloy Piston Rod- Ground and Polished 303 Stainless Steel Piston Seals- Buna N Rod Bushing- Oil Impregnated Bronze Rod Seals- Buna N O-ring Pressure Rating- 200 PSI Maximum(Air only) Temperature Rating- From-20°F to +150°F(25°C to +65°C) For more information see: http:www.bimba.com/Global/Library/Catalogs/Bimba%20Catalogs/FL_FlatCylinders.pdf#page=3 ... moreBimba Manufacturing Company was founded in 1957 when Charles Bimba invented an inexpensive. Non-repairable, stainless steel body air cylinder to replace small bore repairable cylinders. The product has since become an industry standard and Bimba remains the leading manufacturer of this type of cylinder. I will fully guarantee this great cylinder- includes air ports shown. Many more sizes available- see my other auctions. Shipping in the Continental US is FREE- I have very competitive rates for our always welcomed International bidders. Thanks for looking! If you have any question on this item please call us at 1-800-826-3433(9- 5pm Eastern) Pay me securely with your Visa or MasterCard through PayPal! Powered by
|
|
|
Festo DZH-1 5/8"32"PPV-A Push Pull Pneumatic Actuator. Bore is 1 5/8" and Stroke is 32"
|
|
SMC MINI FREE MOUNT CYLINDER BLOCK CDUJB6-6SM-F8PL THANK YOU! Thank you for viewing our items. If you would like to receive updates of our new listings. Please click here and subscribe for our bi-weekly newsletter. Visit our webstore at Burchams Surplus. IMPORTANT SHIPPING INFORMATION! FedEx is our standard carrier* but we are happy to negotiate other shipping arrangements. USPS Priority and UPS shipping are available upon request. Please contact us for details. Our standard carrier to Canada is USPS Priority. DESCRIPTION: This auction i s for a SMC MINI FREE MOUNT CYLINDER BLOCK CDUJB6-6SM-F8PL! Model# CDUJB6-6SM-F8PL Condition: Used surplus in good cosmetic condition with only light signs of wear. Additional description: This item has not been function tested but it was removed from a working ... moreline. There is 6mm of stroke with this unit. More Info on the Web: see page 4 This item retails for about $0.00. If this listing is for a multiple quantity of like items we guarantee the item you receive will be the matching model number and in as good or better condition than the auction photo and description. For warranty information on this auction please refer to the"Returns" details above. For full details please review Warranty& Returns. OUR PROMISE: Burcham's Metal's of Albany. OR has been in business for over fifty years with an established presence on eBay for over twelve years. Burchams Surplus is our eBay store. As an experienced eBay seller it has been our privilege to provide thousands of customers with affordable products and professional service. It is our aim to provide you with a superior eBay buying experience. We do our best to accurately describe each item for sale. Contact us before you bid so that we can answer all your questions about an item before you purchase. We are committed to customer satisfaction through fair surplus pricing. Fast, affordable shipping and professional packaging. We appreciate your business and we want you to come back! Here is what some of our recent cus
|
|
COMPACT IMC S158X78 PNEUMATIC AIR LOCK ~ USED THIS ITEM IS SURPLUS- BOX/ITEM MAY SHOW SIGNS OF DUST/ WEAR/ WRITING/ SCRATCHES/ GREASE FROM STORAGE. Seller makes no guarantees regarding accuracy. Errors or omissions in item descriptions and make no warranty, express or implied as to the nature, quality, value, or condition of any item. Do not assume anything about the item(s) included in this sale. We do not claim to be experts on any of the items that we sell. We do the best research we can and represent the item(s) as clearly and honestly as possible. If you have any questions or concerns regarding compatibility or specific technical specifications, we will do our best to answer them. Please note that we are a business open from 9AM to 3PM(EST) Monday-Friday. We are closed on weekends and ... morenationally recognized holidays. To ensure a timely response to any questions you may have, please do not wait until the last minute to ask them. For questions or concerns contact 1-616-887-3572* Sales Tax: We Collect Sales tax in multiple states. Payment Options: PAYPAL or VISA/MASTERCARD. DISCOVER& AMERICAN EXPRESS(Call 1-616-887-3572) Your business is important to me. If there is any problem with your purchase or the transaction in any way please let me know. THANK YOU and HAVE A GREAT DAY! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
HitachiSeikiva45 Our internal inventory number on this product is 19W# G2-11D. PLEASE NOTE: We just stripped a Hitachi Seiki Machining Center. Model VA-45, S/N VA45085 with Fanuc System 6M Control. This part was removed from that machine! Click here to go directly to a listing of JUST the items removed from that machine! Please Note: This part is from a working machine. We have no way of testing it once it was removed. Please contact us with any questions. DESCRIPTION: This item was removed from a working Hitachi Seiki. VA-45. You are bidding on an SMC Cylinder(Pneumatic) Model Number: CDQ1B40-20D CDQ1B4020D CDQ1B4O-2OD CDQ1B4O2OD Max Pressure: 9.9kgf/cm^2. 140 psi. Weight App. 1 Lb. Dimensions: 4" x 4" x 2" Cosmetic Condition Rating: 4-Good Note: This is solely a cosmetic description ... moreof the item. This part was pulled from a working machine. And is being sold in good working condition unless otherwise stated! 1) Very Poor 2) Poor 3) Fair 4) Good 5) Like New Condition*NOTE* FREE SHIPPING& HANDLING to lower 48 States via UPS Ground Service. All Other Domestic Shipments pay $10.00 Boxing/ Handling PLUS shipping costs from Zip 49534! All International Shipments pay $15.00 Boxing/ Handling/ Processing PLUS shipping costs from Zip 49534! ALL INTERNATIONAL ORDERS ARE SUBJECT TO ACTUAL SHIPPING COSTS- SOMETIMES THE SHIPPING CALCULATOR IS NOT CORRECT WITH PACKAGES! WE ALSO MAY SUBSTITUTE SHIPPING COMPANY TO GET YOU A BETTER PRICE! Domestic Shipping Policies: All shipments are sent standard ground unless requested differently. We can ship UPS next day air(red) per your request. Unless requested. All next day air shipments will be for the 10:30 a.m. delivery. We can ship this early A.M. But you must include that in your Paypal payment notes. International Shipping Policies: We ship FedEx International. UPS International, USPS Express International. Only when requested. We ship USPS Priority; this carrier type lacks reliable tracking info. We cannot be held responsible for your shipment once it lea
|
|
FOR ANY QUESTIONS BEFORE BUYING THIS PARTICULAR ITEM. PLEASE CALL US AT 805-531-9523 Item Details: USED IN GOOD WORKING CONDITION DUFF-NORTON M3465-97 MODULAR ACTUATOR MCA5D00D14XAA Please Note: Inspect photos for full Specs. NOTE: DO TO MULTIPLE QUANTITIES OF THIS ITEM MAY NOT BE THE ONE IN THE PICTURE. PLEASE LOOK AT OUR EBAY STORE FOR OUR ENTIRE INVENTORY. BUYERS NOTE: We accept no responsibility on the correct application or installation of this item. This item is to be installed and maintained by qualified individuals. WE claim no expertise in the use of this or these items. By purchasing this item you agree to hold BRIMSTR only liable for the purchase amount. SHIPPING DETAILS IF YOU HAVE A UPS ACCOUNT NUMBER WE CAN PUT THE SHIPPING CHARGES UNDER YOUR ACCOUNT NUMBER. MAKE SURE TO PUT ... moreIT IN THE EBAY NOTES MESSAGES AREA WHEN PURCHASING THIS ITEM. OR SEND US A MESSAGE THROUGH EBAY. We do not use USPS Flat Rate Boxes. RETURN POLICY We do our best to describe each item accurately. If an item arrives damaged or incorrectly described. We will work with you to resolve the situation. We only accept returns on items that do not work upon receiving them. We do not accept returns because the wrong item was purchase or the buyer change their mind. You must let us know within 14 days of receiving the item to receive a refund. OUR GOAL IS ALWAYS ACHIEVE 100% CUSTOMER SATISFACTION LOCATION- U21 AT Powered by
|
|
Title: Numatics Air Cylinder Description: Our Internal Stock# F12-8(5/14/13 dan) You are about to purchase the following item: Catalog# GG040/009000000 3-1/2" Stroke 5/8" Diameter Rod NOTE: Tag is Smeared and Hard to Read This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Full 30 Day Return Policy if Found Defective(Freight Prepaid by Buyer) Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine ... morethe correct shipping cost to your destination. Buyer is responsible for ALL shipping fees incurred. Unless otherwise noted. This includes any Duty Fees or Taxes incurred in the process of shipment to foreign countries. We ship worldwide at great rates! International Buyers: You must include a Phone Number AND Email address to avoid shipping Delays and Lost Shipments. If your International Shipment is deemed Undeliverable without supplying this Information. It will be FORFEITED. Send us a message if you have a question about shipping your item. All non-skidded items that are bought and paid for before 3 PM Eastern Time will enjoy Same Day Handling and will likely be shipped out immediately. If you need to ensure immediate processing. Please call to make arrangements. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the s
|
|
|
cccccccccccccccccccccccccccccccccc BOSTON GEAR REDUCER 700 SERIES Model:F72120B5G Input HP: 1.25 Check my store for similar gear boxes. Motors, and industrial supplies! cccccccccccccccccccccccccccccccccc Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13eb52b8339-0x101-
|
|
TOL-O-MATIC BAND CYLINDER PART# BC2#274140 CONFIG: BC210 SK8 CT2 FM2 WO# W429420 APPROX 16" OVERALL LENGTH PLEASE READ BEFORE BIDDING. MAKING AN OFFER, OR PURCHASING Please DO NOT PAY until invoiced. WE COULD POSSIBLY SAVE YOU MONEY ON SHIPPING SHIPPING: All shipping/handling costs will be the sole responsibility of the buyer. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address so we can get the item shipped to you. Do not forget about any other charges which are charged by the carrier. This is something we have no control over and is an additional charge to shipping. RETURN POLICY: WE WILL REFUND YOUR MONEY IF THE ITEM YOU RECEIVE DOES NOT WORK AT ALL UNLESS IT WAS LISTED AS BEING PARTS ONLY OR NOT IN WORKING CONDITION. THE BUYER WILL BE RESPONSIBLE FOR ... moreALL RETURN SHIPPING FEES. AFTER SELLER AGREES TO SEND THE ITEM BACK AND THE ITEM IS RECEIVED AT OUR LOCATION WE WILL ISSUE A REFUND. ITEMS MUST BE RETURNED WITHIN 14 DAYS FROM THE DATE IT WAS DELIVERED TO THE BUYER. ADDITIONAL INFORMATION: Please note we are not experts in the parts or related fields. We may not be able to answer all of your questions but we will do our best to find all information requested. Approximate weight: 4 lbs. Please contact us for any questions or concerns. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. Thank you for your interest in our items. We always appreciate the business opportunities Be sure to add us to your favorites list and check out our other items. MRC/ 702/ SKID#207/ 1) BN
|
|
|
Vici A45 Standard Air Actuator with Closemount Assembly comes with hardware 30 Day HSC Warranty included. HSC# 60165 Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
USED. PSN-750-8. S/N: A951201169. PMAX 120 PSIG. SEE PICS FOR MORE DETAILS. APPROX SHIPPING WEIGHT: 82 LBS. ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO PURCHASE PRICE. THESE FEES WILL VARY ACCORDING TO SIZE. PLEASE CONTACT SELLER FOR PRICE OF PALLET& SHIP QUOTE. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COST WILL BE PRIOR TO BIDDING OR BUYING. CONTACT SELLER FOR SHIPPING QUOTE CL. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Turn-Act Rotary Actuator 112-1Y1-B00 Buy With Confidence
|
|
Robohand RPC-315 Pneumatic 3-Finger Parallel Gripper From our inventory. We are selling a Robohand Pneumatic 3-Finger Parallel Gripper. Specifications: Model# RPC-315 ST14-6-A 3 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 3 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through ... morePayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be shipped and arrive. Keep in mind that we are shipping industrial items that may require additional time to ensure safe and proper pac
|
|
Welcome to Canarsky& Daughters. We are here to sell these items. We are looking forward to doing business with you. So have fun browsing and buying. Reasonable offers are always welcomed. CLICK HERE TO SEE OUR OTHER ITEMS FOR SALE ON EBAY ATTN: Please read all of our updated terms and conditions posted below before bidding. If you have difficulty with these terms. Please write us with your concern. By placing your bid. You accept these terms and agree to abide by them. THIS LOT CONSISTS OF: 1 USED DUFF-NORTON SPA6515-142 1/2 HP SUPER-PAC ACTUATOR. MOTOR: 1/2 HP. RATED OUTPUT: 1500 LBS, SPEED: 50 IN/MIN, 115 VOLT AC, 6.2 AMP, 60 HZ, CLASS B, DUTY: 26 MINUTE ON/1.25 MINUTE OFF. CAPACITY: 1500 LBS. CONDITION: USED SURPLUS. NO REASONABLE OFFER REFUSED. The approximate shipping weight is 35 ... morelbs. All items are sold"as is" Unless described as"new" above. Items are used. We do not have the facilities to test most of these items. You are only buying the item(s) pictured/described. ALL TECHNICAL QUESTIONS/PROBLEMS SHOULD BE ADDRESSED THROUGH EBAY CHANNELS FOR THE FASTEST POSSIBLE SERVICE. IF SENT TO OUR EMAIL ADDRESS. YOUR CORRESPONDENCE WILL GO TO THE JUNK FOLDER, AND WILL NOT GET ADDRESSED. Please note. We are not experts in these fields and so may not be able to give you the answers you require. We will, however do our best to find the information you request. THANK YOU FOR YOUR COOPERATION. This item must be settled for immediately. All items not settled for in full will be relisted or sold at our discretion and appropriate feedback will be left. Please be sure to enclose a shipping address(street address) EBay ID number, and preferred shipment method if applicable. The total due is always equal to the total of 1) the agreed amount of the item and 2) the actual shipping costs and 3) a $5.00 domestic. Or a $10.00 international, packaging and handling fee. The complete amount must be SENT VIA PayPal. PLEASE NOTE: The actual shipment of your item(s) may take anywhere from
|
|
Festo AV-12-4-C Pneumatic Cylinder 12mm From our inventory. We are selling a Festo Pneumatic Cylinder. Specifications: Model# AV-12-4-C 12mm ST25-4-B 1 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 1 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. ... morePaying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be shipped and arrive. Keep in mind that we are shipping industrial items that may require additional time to ensure safe and proper packaging. Open Monday throug
|
|
SMC CDU20-50D Pneumatic Cylinder 50mm Stroke From our inventory. We are selling a SMC Pneumatic Cylinder. Specifications: Model# CDU20-50D 20mm Bore 50mm Stroke ST25-3-A 2 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 2 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal ... moreas a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be shipped and arrive. Keep in mind that we are shipping industrial items that may require additional time to ensure safe and proper packaging
|
|
|
TRANSLATE Arabic Chinese French German Greek Indonesian Italian Hindi Japanese Korean Swedish Portuguese Russian Spanish Remote Controls RC1240-DA Actuator F10/F07-22(1.0MPA/ 10BAR/ 150PSI) HAS SOME SIGNS OF USE. FROM A WORKING ENVIRONMENT. THANKS FOR LOOKING!
|
|
|
Brand: JOHNSON Condition: Used Model: 16305 Weight: 1 lbs Dimensions: 9 X 7 X 6 SKU: B203647 Additional Notes:
|
|
ROBOHAND 100 PSI. 0.75" STROKE PARALLEL GRIPPER RP-17 Search ROBOHAND PARALLEL GRIPPER USED RP-17 100 PSI. 0.75" STROKE, 220 LBS GRIP FORCE ITEM SHOWN IS A REPRESENTATIVE UNIT. CONDITION WILL BE VERY SIMILAR. PLEASE SEE ENLARGED PHOTOS FOR ADDITIONAL INFORMATION. GUARANTEED NOT DOA. 119 DJ SW 4 372013 We do not ship to P.O. Boxes. International customers are responsible for all duties. Taxes, and tariffs. There will be no refunds for refused shipments. Please note that shipping charges are estimated and do not take into account multiples, oversized packages or insurance. We estimate shipping colsts in order to keep shipping cost as minimal as possible. Actual shipping charges will be calculated and added when your order is processed. If there is a significant increase in shipping ... moreyour order will be held and you will be contacted. We apologize in advance for any inconvenience this may cause you. If needing special shipping services please contact us prior to purchasing/ bidding on the item. Due to our pick-up schedule, please contact us before bidding/purchasing the item if needing expedited shipping. Please read description in its entirety before bidding/purchasing. We do our best to accurately describe the items that we are selling. If you have any questions or problems with your transactions please contact us as we strive for customer satisfaction. The photos that are provided are of the actual item. Unless otherwise stated in the discription. Please take the folloing into consideration. The color of the photo may vary from the actual product due to translatoin and reproduction limitations of photography. Item comes with what is stated in the auction, no other items are included unless otherwise stated in the auction. When a PDF  or other link is included in a listing. The information is only inteded as a resource for additional information, not as an exact representation of the item. If a situation arrises that  the item you receive is damaged or D.O.A. please notify us within 14 days aft
|
|
Robohand Custom X2030711 Shielded Gripper RPLC In our is a Robohand Custom Shielded Parallel Gripper(model: X2030711) Specifications: Model# X2030711 ASM: 109 Stroke: 1 3/4in*There's a broken off fitting in this unit. But other than that it appears to be in great condition ST11-2-J 1 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 1 lbs. To calculate shipping. Payment Types ... moreWe are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be shipped and arrive. Ke
|
|
Fabco-Air Pancake hp2-1/2x3ff-dr-j-k-mr2 Line Cylinder Press + sensors fittings Unit was removed from a working machine. Sold as seen as is. Comes with stops and sensors. You are buying 1. READ BELOW BEFORE BIDDING: You are buying the above as is as. This means don't assume anything. If you have questions ask. If it’s not listed as new in the box then don't think it is. It’s sold as seen as is. Even if the unit has been tested or removed from a working machine. Payment: PAYPAL ONLY We will ship using our ups account within three days only in the USA. All other areas will ship USPS and we will ship on Saturdays only so it could be up to 6 days depending when you buy the unit. ALmost all items were removed from a working machine but are sold as is. Feedback: We will post POS feedback ... morewithen 30 days of your purchase. If a threat of Negative. feedback is used to get something that was not listed or service not listed we will forward the request to EBAY without notice to the buyer. We offer many vibratory Feeder Services. Service on Feeding Equipment, Refurbishing, Replacement or Re-tooling, Retrofitting and new turnkey systems. We have the largest inventory of used Vibratory Feeders you will ever find. If you have any questions regarding the above units please contact us at Feeding Concepts Inc. 317-773-2040. On Jan-18-13 at 13:56:26 PST. Seller added the following information:
|
|
NUMATICS 236-103B Valve& HUMPHREY H110-AE1. New This auction is for a NUMATICS 236-103B Valve& HUMPHREY H110-AE1 Valve. New. NUMATICS 030SA456B000061/ 236-103B Valve 24VDC 6 WATTS. HUMPHREY H110-AE1 20-100PSI. Buyer to pay for shipping and handling. CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual ... moredomestic shipping please E-mail in advance for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate h
|
|
Parker Model: P1E-M080MC-0610 Pneumatic Cylinder. This product looks to be unused. Bore Sice: 32- 125 Cylinder Version: Rod locking tie rod Cylinder Bore mm: 80 Sealing/material: Standard Seal magnetic piston Stroke length: 0610 10 bar Terms of Sale Systech. Inc. provides a 14-Day After Receipt of Product Warranty unless otherwise indicated. Buyer’s identified defective product shall be returned to Systech at Buyer’s expense. Buyer is responsible for obtaining return authorization from Seller. Full refund shall be issued after receipt. Inspection and serial number verification. Refund includes shipping paid outbound from Systech. Due to cost of administration. Purchased products returned due to no longer needed or Buyer purchased error shall be assessed 15% Unit Price) Restock Fee. Buyer is ... moreresponsible for obtaining return authorization. Shipping paid outbound from Systech is not refundable. Systech ships via USPS and FedEx(Ground and Express) FOB Phoenix. Please contact Systech prior to paying for product if Express shipping is required. Buyer has option to select alternate transport carrier at Buyer’s expense. Buyer must arrange alternate shipping carrier. Acceptable Payment Methods are: PayPal; Visa; MasterCard or American Express. Credit Card payment is only accepted for domestic ship to locations. Unless otherwise approved by Systech. Local Pick up is acceptable. Applicable tax applies. We thank you in advance for shopping our Store and look forward to continued business with you. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
SMC CMBA20-150-XC1 CYLINDER 9.9 KGF/CM2 10" NEW APPROX: 10" LONG APPROX: 15" LONG EXTENDED ITEM IS NEW/UNSUED AND COMES WITH A DOA WARRANTY! Buyer to pay for shipping and handling. CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance for shipping and handling ... morecharges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powere
|
|
CROMPTON 252-PMMU Relay This auction is for CROMPTON 252-PMMU Relay. Buyer to pay for shipping and handling. CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard ... moreor American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage you
|
|
NUMATICS SOLENOID R10R-01EGLP This auction is for NUMATICS SOLENOID R10R-01EGLP. Buyer to pay for shipping and handling. CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, ... moreMasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy an
|
|
PHD Slide and Cylinder SEB23X41/4-AE-BR This auction is for PHD Slide and Cylinder SEB23X41/4-AE-BR-J2-J6 and SEB23X41/4-AE-BR-H4-J2-J6. Made in USA. Buyer to pay for shipping and handling. CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance for shipping and handling ... morecharges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packagi
|
|
AIRPEL Anti-Stiction Air Cylinder E16D3.0N 100Psi This auction is for two AIRPEL Anti-Stiction Air Cylinder E16D3.0N. Made in USA. Not DOA. MAX PRESS 100psi. Shipping and handling continental US via ground. CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance for shipping ... moreand handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
ALLEN BRADLEY 2755-NC7 Connector. NIB. Made in USA. Buyer to pay for shipping and handling. CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express ... moreRemit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
SMC NCA1WF150-0200-XA20F Cylinder 250 PSi 1.70 MPa. New. Buyer to pay for shipping and handling. CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American ... moreExpress Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active ite
|
|
SMC D-J79 Auto Switch Pair In our is a pair of SMC Auto Switches(model: D-J79) Specifications: Model# D-J79 Rail Mount: Solid State. General Purpose, 2 Wire, Grommet, In-line ST10-1-F 1 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 1 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card ... morethrough PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be shipped and arrive. Keep in mind that we are shipping industrial items that may require additional time to ensure safe and pr
|
|
2) FESTO Cylinders ADVU-20-20-PA. ADVU-16-10-PA new This auction is for(2) FESTO Cylinders. ADVU-20-20-PA Serie N241 and ADVU-16-10-PA Serie M841 new. NOT DOA. Pmax= 10bar/145psi Buyer to pay for shipping and handling. CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance ... morefor shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was
|
|
Robohand Pneumatic Linear Thruster 1" Travel DLT-20EB-1 In our store is a Robohand Pneumatic Linear Thruster(model# DLT-20EB-1) Specifications: Model# DLT-20EB-1 Travel: 1" ST11-4-B 14 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 14 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit ... moreCard through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be shipped and arrive. Keep in mind that we are shipping industrial items that may require additional time to ensure s
|
|
|
HUMPHREY HTBDAM25X11/2 | HTBDAM 25X11/2 Air Cylinder! WOW! This item appears to be used. Unable to test. Selling AS IS Pictures below are of actual item for sale. Location P66 If you have any questions or require more pictures. Please contact me! NEXT DAY DELIVERY AVAILABLE- PLEASE CALL FOR DETAILS! Not what you are looking for? Visit our e-store!
|
|
SquareTrade © AP6.0 | | | JOUCOMATIC ASCO 43500287/ C20AS80 ISOCLAIR PNEUMATIC, Click to View Image Album*WELCOME TO THE GREEN APPLE EMPORIUM* WHERE YOUR GUARANTEED A HASSLE FREE TRANSACTION FROM START TO FINISH FROM A TRUSTED EBAY POWERSELLER Every order is packed well and comes with Delivery Confirmation FREE SHIPPING ON SELECT ITEMS Your Buying 1 BRAND NEW IN PACKAGE WITH INSTALL SHEET JOUCOMATIC ASCO ISOCLAIR PART# 43500287- C 20 AS 80-10C/+70C P.MAX= 10BAR/140PSI FREE Domestic Shipping International shipping is available. P lease use the Calculator below. Int'l Handling is 5.00 While your here. Try your hand at the Shell Game Thanks for shopping at the Green Apple Emporium! Quality.Value,Reliability and Service is what our Business is built on. We value every customer. Because ... morewe want your business! Earning your business one sale at a time Copyright 2008 All Rights Reserved All photos and text are the sole property of GreenAppleEmporium Paypal Payment, We accept Paypal I accept the following forms of payment: PayPal, Preferred Checkout, We Accept Paypal For fastest processing of this order. Please use Vendio Checkout! Shipping& Handling, International Handling ranges from 1.00 to 5.00 depending on the item. Only 1 fee is added per order. US Shipping. $0.00 USPS First-Class Mail® International Shipping. Click button to see prices: USPS First-Class Mail International(Worldwide) STORE POLICIES, SHIPPING& HANDLING, WE SHIP MONDAY THRU SATURDAY VIA USPS EVERY ORDER SHIPPED COMES WITH A DELIVERY CONFIRMATION NUMBER WHICH IS E-Mailed TO YOU WHEN YOUR ITEM IS SHIPPED YOUR PARCEL IS PACKAGED WELL TO ASSURE SAFE DAMAGE FREE DELIVERY. INTERNATIONAL HANDLING IS FROM 1.00 TO 5.00 TO COVER THE SPECIAL TRIP TO THE POST OFFICE.THIS WILL BE POSTED IN THE LISTING DESCRIPTION, WARANTEES, WE WILL TELL YOU IN THE LISTING IF THIS IS A NEW OR USED ITEM. No Warantees neither expressed or implied FEEDBACK, If you have an issue regarding your order please contact us first and let us see if we can help before y
|
|
SMC Auto Switch D-Y69A This is an SMC Auto Switch(model# D-Y69A) Specifications: Model# D-Y69A, Solid State. General Purpose, 3-Wire NPN, Vertical, 1 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 1 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. ... morePaying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be shipped and arrive. Keep in mind that we are shipping industrial items that may require additional time to ensure safe and proper packaging. Open Monday through
|
|
Lot 2 SMC Miniature Stainless Steel Cylinder. Double Ac Description Lot 2 SMC Miniature Stainless Steel Cylinder. Double Acting, Single Rod + LINEAR SLIDE BEARING. STROKE: 500( 50 in) Made in USA Made by SMC Model NCJ2B10-500R Good Condition SPECIFICATIONS: Mounting B(basic) PSI: 100 max? BORE: 10(3/8 in) STROKE: 500( 5 in) LINEAR SLIDE BEARING IKO LWLF18 B Japan See Pictures for more info Overall Dimensions 14.5 x 2.5 x 1.5 in Approximate Shipping Weight 1 Lbs. Unit came from a working facility; it appears to be in working condition other wise noted in the description. Prospective bidders are welcome to inspect equipment under power at our Facility but please call for an appointment. Item is sold As- Is. $$ INTERESTED IN SELLING YOUR EQUIPMENT? $$ PLEASE CALL' 626) 330-4647- We'll ... morebuy from one machine to your entire plant to be listed on Ebay! SHIPPING A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) There will be a local pick-up fee for items purchased after 10/20/2008* Please contact us at 626-330-4647 if you would like to combine items to save on shipping and handling. We encourage customers to use there FEDEX/ UPS/ USPS account to ship out items. All items can be picked up and are shipped from 14911 Don Julian Rd. City of industry, CA 91746 626-330-4647 SPECIAL! NOTE.Item description has been composed utilizing details and criteria available to our description research staf
|
|
|
Lot of 3 different air cylinders as shown.
|
|
COMPACT AIR RHH4X112 This auction is for a COMPACT AIR RHH4X112. TM MS1. 6/00 Buyer to pay for shipping and handling continental USA CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via ... morePayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fa
|
|
2) PHD CYLINDERS This auction is for a TWO PHD CYLINDERS. PHD ML# 190748 w/ two PHD 53606-1-02 sensor PHD NO LABEL ON IT w/ two Compact contronic WSCLRPS Sensor Buyer to pay for shipping and handling continental USA CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance ... morefor shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wron
|
|
GUARDMASTER MINOTAUR MSR5T P/N: 23020 This auction is for GUARDMASTER MINOTAUR MSR5T P/N: 23020. 24V AC/DC Buyer to pay for shipping and handling continental USA. CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone ... moreis: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bd0f%3E-13fc52b6226-0x105-
|
|
NUMATICS ACTUATOR F1CG-01M1A-A3A4 This auction is for a NUMATICS ACTUATOR F1CG-01M1A-A3A4. Made in USA. Buyer to pay for shipping and handling continental USA. CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance for shipping and handling charges. PAYMENTS Payment(s) ... morefor purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by The free listing
|
|
SMC NP420-DN1 Valve Controller with 16 SMC Valves. This unit looks to have little or no use and contains the following Valves: 14) VQ1200Y-5-X35 Valves. 0- 0.7 MPa(2) VQ1200Y-5 Valves. 0.1- 0.7 MPa Contains SMC ARM2000 CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance ... morefor shipping and handling charges. PAYMENTS Payment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to ronf@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything w
|
|
NORGREN S-33016 MOSIER AIR VALVE USED TYPE S-33016 0X OPT 187037.1 24 VOLT AC J99-UM VALVE IS A WORKING SPARE HAS A FEW SCUFF MARKS BUT WORKS AND COMES WITH A DOA WARRANTY! CONDITION All equipment is sold AS-IS. No warranty unless otherwise specified in description. TAX If applicable Arizona residence must pay sales tax unless you send us a valid tax reseller number. Please send reseller form to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 or fax(602)437-1055 SHIPPING Buyer is responsible for shipping and handling charges. Insurance is optional. Please notify us if we will be shipping to a business or a residence. Shipping and handling continental US via DHL ground. International buyers and unusual domestic shipping please E-mail in advance for shipping and handling charges. PAYMENTS ... morePayment(s) for purchases are made via PayPal. Visa, MasterCard or American Express Remit Payments To: Systech. Inc. 4439 South 38th Place, Phoenix, Arizona 85040. Attn: EBay Auction# Systech Inc. will wait 10 days for all checks to clear before shipping. Please send payments to: Systech Inc. 4439 S. 38 th Place. Phoenix. AZ 85040 QUESTIONS Please E-mail us with your questions to sales@systechaz.com. Or our phone is: 602) 437-0100 or(800) 366-6197. But E-mail is best. Systech Inc. will not end any auction early except for damage or incorrect information. DISCLAIMER Systech Inc. makes no representation of any item sold to be fit for a particular purpose and assumes no liability for its use or misuse. It is assumed that the unit will be installed and operated by qualified personnel. The purchaser agrees that the seller shall not be held responsible or liable for any injuries or damages. Whether incidental or consequential, associated in any way with the equipment. The Purchaser. By bidding on this equipment, indicates their acknowledgment of and agreement to the terms of this disclaimer. FOLLOW UP Systech Inc. would greatly appreciate hearing from you if anything was wrong with shipping or packaging. Powered by Th
|
|
|
SMB Machinery Systems- Parts Department SMB Machinery Systems LLC The Equipment Superstore BRAY 90-0830-21320-532 PNEUMATIC ACTUATOR 140PSI DOUBLE ACTING Can't find what you are looking for? Contact us and we will check our vast inventory or contact our vendors to see if we can find what you need at a reasonable price! 15.000 Square Ft. Parts Department! Ebay Listing Section We have a vast inventory of new. Used and surplus parts including but not limited to: Motors Blowers Pumps Gearboxes Electrical Controls Chain and Belting Valves: Ammonia. Steam, Stainless Sprockets Stainless Steel Fittings Pnuematic and Hydraulic components Bearings And More! Red Richards Parts and Purchasing Manger Direct: 770-479-2698 Fax: 770-720-2011 7am-5pm EST
|
|
FABCO-AIR SMALL PALM BUTTON LIGHT SPRING DIRECTIONAL CONTROL VALVE 18PS-4-L THANK YOU! Thank you for viewing our items. If you would like to receive updates of our new listings. Please click here and subscribe for our bi-weekly newsletter. Visit our webstore at Burchams Surplus. IMPORTANT SHIPPING INFORMATION! FedEx is our standard carrier* but we are happy to negotiate other shipping arrangements. USPS Priority and UPS shipping are available upon request. Please contact us for details. Our standard carrier to Canada is USPS Priority. DESCRIPTION: This auction i s for a FABCO-AIR SMALL PALM BUTTON LIGHT SPRING DIRECTIONAL CONTROL VALVE 18PS-4-L! Model# 18PS-4-L Condition: New surplus with no factory packaging. Additional description: N/A. More Info on the Web: This item retails for about $0.00. ... moreIf this listing is for a multiple quantity of like items we guarantee the item you receive will be the matching model number and in as good or better condition than the auction photo and description. For warranty information on this auction please refer to the"Returns" details above. For full details please review Warranty& Returns. OUR PROMISE: Burcham's Metal's of Albany. OR has been in business for over fifty years with an established presence on eBay for over twelve years. Burchams Surplus is our eBay store. As an experienced eBay seller it has been our privilege to provide thousands of customers with affordable products and professional service. It is our aim to provide you with a superior eBay buying experience. We do our best to accurately describe each item for sale. Contact us before you bid so that we can answer all your questions about an item before you purchase. We are committed to customer satisfaction through fair surplus pricing. Fast, affordable shipping and professional packaging. We appreciate your business and we want you to come back! Here is what some of our recent customers have to say about us: Great Transaction! Highly Recommended! Will do business again! Buyer: asc_equip( Mar
|
|
SMC NCDRQBW15-90 Compact Rotary Rack and Pinion Style Actuator Full Model No. NCDRQBW15-90-F79L Max. Pressure: 0.7MPa Size: 15mm Rotation Angle: 90(80 deg. to 100 deg. Auto Switch: Solid State. General Purpose, 3 Wire NPN, Lead Wire, Horizontal, 3M The NCRQ series is a compact rotary. Rack and pinion style actuator. The double rack design eliminates backlash and increases strength. Standard equipment include a built-in rubber bumper and rotation adjustment. Auto switch capabilities are an option. Compact double rack design eliminates backlash Body can be mounted as flange Stainless steel shaft Built-in rubber bumper Rotation adjustment is standard Auto switch capable, This SMC NCDRQBW15-90-F79L Actuator is used but in good physical and working condition. I have two of these actuators available ... morethat are pretty much identical to the one in the picture. You will receive the module as pictured or one just like it only. No other cables. Cords, documentation, or any other accessories are included. This item is being sold with a 14-day No-DOA Warranty. Please feel free to email me with any questions. Good luck! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Description Inventory ID: E-367. Description: PHD Pneumatic Slide. SFP5-40X-650-L9-M-NB3-PB. Looks in good shape. Some scratches from sitting in inventory, not certain if new or used. Top Plate that glides is 8-5/8" x 3-1/4" Overall Length 39" Payment Please make sure you have the ability to pay for your item within 5 days of purchasing the item. If you require additional time please contact us to make special arrangements. Shipping We do our best to combine shipping and offer different ways to ship an item to save you money! When we receive your payment and begin the process of making arrangements for shipping we will contact you if you have paid too much in shipping. We will then issue you the refund for the overage. Generally we can ship items same day depending on when payment ... moreis made, but please figure at least a 1 day handling time to get the item out the door. Terms of Sale All items are sold as-is where-is with no warranties expressed or implied unless otherwise noted. If in the event you feel that there was a mistake in the listing or that you are not satisfied after purchasing your item. Please feel free to call us and we will make it right! We stand by all items we sell! About Us CGHITEK is a buyer and reseller or quality surplus industrial equipment. From semiconductor equipment to test equipment to general industrial machinery and supplies we got you covered! Contact Us In the event that you need additional questions answered please feel to contact us by clicking on"Ask A Question" below. Just below the listing. If you prefer to speak with us by phone, just send us your phone number and tell us the item you are wanting to discuss and we will get back to you as soon as possible.
|
|
Item up for sale is a: Fabco-Air The Pancake Line Cylinder 721-4-E-MR Unit is untested- its working condition is unknown Unit has been previously used and appears to be in semi-worn shape Item is used and is untested other than what is indicated below: If you have any questions regarding this item please feel free to contact me and I will do my best to answer your questions 1 item as shown in picture. Picture represents the actual item. ~8 Pounds in a box with packaging materials Included is only what is mentioned. No other cables. Parts, power cords, power adapters, software or any other accessories included. Payment options: PayPal only or contact us for payment methods to pay on pickup. Warranty for US shipments: 14 days testing period unless the auction specified as final sale. Buyer must ... morereturn the product back to the company in a timely manner. Refund upon receiving and inspecting of product and for the cost of the product only. Restocking fee may apply for the new product shipped. Warranty for International shipments: All international orders are final. No exception. Shipping: Buyer is responsible for all shipping cost including returns. Please note for domestic shipments(within US) we ship Fedex ground only. But you can use UPS ground shipping rates(calculated automatically by ebay) to estimate the shipping charges. Actual Fedex ground rates may be cheaper then UPS depending on the destination, so for heavy packages you can always contact us to get the exact shipping rate. FEDEX does not ship to PO Boxes- please provide us with a regular address prior to completing the transaction. International Shipments: International shipments are shipped by USPS global express mail if such option is available. We process international shipments twice a week. Please note that Buyer is responsible for all custom duties/taxes/fees where applicable. Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's
|
|
770) 253-6114, Search our eBay Store: Auction Terms | eBay Store | Contact Us We will be closed on: Dec 25. 2006, Dec 26. 2006, Jan 1. 2007, Jan 2. 2007, On these dates we will not be answering emails or phone calls and we will not be shipping items. COMMENTED OUT- Click here to estimate shipping All international buyers must contact us for a shipping quote before bidding. See for details. Mailed Payments, Bank Wire Transfer, Visa& MasterCard, Buyer must call(770) 253-6114 before purchasing item to pay by Visa or MasterCard. If the buyer does not call. Payment by Visa or MasterCard will not be accepted. All international buyers. Including Canada and Mexico, must pay by Bank Wire Transfer. We do NOT accept escrow or ship COD. See for details. SMC CQ2A32-25DM CQ2 COMPACT PNEUMATIC CYLINDER ... moreACTUATOR This auction is for one SMC CQ2A32-25DM. With a short overall length. This space-saving cylinder helps to make various jigs and equipment more compact. This unit is in excellent physical condition and will arrive in the condition shown. It comes with a 14 Day Guarantee against being DOA from receipt. You are bidding on only what is listed in the description and what is in the pictures. If it is not listed in the description and you don't see it in the pictures, then it is not included. Power cords and power adapters are never included unless specifically mentioned. You must agree to our terms to purchase. ATTENTION: WE HAVE BEEN IN BUSINESS SINCE 1978. FEEL FREE TO CALL US FOR ADDITIONAL INFORMATION. GOOD LUCK BIDDING. By bidding on this auction you are agreeing to these terms. These terms are not negotiable. NO order will be shipped until full payment is made INCLUDING SHIPPING. Shipping listed is for the continental United States only. We carefully package and fully insure every shipment to protect both the seller and buyer. Please allow a minimum of 3 days for shipping after transaction is complete. If we use your shipping account we will charge an additional handling fee for the packing of the it
|
|
SMC Compact Cylinder Actuator CDQ2B63C-J3699-XC11 Weight: 15 lbs Pcs. 2(CW109 L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control ... moreover and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call(856) 881-3185 Monday thru F
|
|
THE ITEM IN THIS ACTION IS THE MHQ2-25D1 Parallel Gripper ONLY When ordering this part the Order NO. is MHQ2-25D1 Details Regarding Used(Next to new/very good condition. Shelf Wear) MHQ2-25D1 has mounting holes on the Grippers faceing the discription lable on the Actuator This series is a standard type parallel air gripper. Taking the place of the MHQ2 series. A linear guide provides high rigidity and high accuracy. MHQ2 can operate under high pressure even at a large holding point and overhang combined with a high degree of precision mounting repeatability Parallel air gripper Double acting Auto switch capable, Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Shipping: We ship within 24 Hours ... moreafter the payment is cleared(Except weekends and holidays) Canada: Canada Post Regular Parcel(2-10 business days) USA: Canada Post International: Air and Ground Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Not what you are looking for? Visit our e-store! Contact for combine shipping Addley Precision Inc. 8870 County Rd. 93 Midland Ontario Canada L4R 4K4 Phone 705 527 6050 Fax 705 527 5626.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-13fc966ba75-0xf1-
|
|
THE ITEM IN THIS ACTION IS THE MH2 C- 25D Parallel Gripper ONLY When ordering this part the Order NO. is MCH2-25D Details Regarding Used(Next to new/very good condition. Shelf Wear) The MHC gripper is ideal for use in applications requiring angular gripping. The opening angle ranges from 30 to-10 degrees. A double piston mechanism provides a large amount of gripping force. While maintaining a compact design. The MHC series has a built in speed adjustment and a recessed groove for auto switches. Angular style. Compact, air gripper, Large gripping force provided by the use of a double piston mechanism, Action: double acting. Normally open, Built-in variable throttle, Auto switch capable, Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false EN-US ... moreX-NONE X-NONE MicrosoftInternetExplorer4 Shipping: We ship within 24 Hours after the payment is cleared(Except weekends and holidays) Canada: Canada Post Regular Parcel(2-10 business days) USA: Canada Post International: Air and Ground Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Not what you are looking for? Visit our e-store! Contact for combine shipping Addley Precision Inc. 8870 County Rd. 93 Midland Ontario Canada L4R 4K4 Phone 705 527 6050 Fax 705 527 5626
|
|
|
SMC Compact Guide Cylinder Location: C 0304, Specs Model: MGPM20TF-50 Max Press. 1.0MPa Bore: 20 mm Stroke: 50 mm Description Here is an SMC Compact guided air cylinder. This item is in excellent working and cosmetic condition complete with limit switches. It is guaranteed to arrive not DOA with a 14 day right of return.For more information on this item. Please click Shipping Feel free to e-mail us at motionconstrained@gmail.com if you have any questions. Also. Feel free to call our office anytime at 970-292-8316. Shipping costs are available from the shipping tab depending on your location. free customisable galleries from
|
|
New Tol-o-matic BC3#275723 BC310 SK84 Rodless Pneumatic Actuator 84"Travel From our inventory. We are selling a NEW Tol-o-matic Pneumatic Actuator. Specifications: Model# BC3#275723 Configuration: BC310 SK84 Travel: 84" RL-2-D 34 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 34 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment ... moreper eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be shipped and arrive. Keep in mind that we are shipping industrial items
|
|
New Tol-o-matic BC3#275722 BC310 SK30 Rodless Pneumatic Actuator 30"Travel From our inventory. We are selling a NEW Tol-o-matic Pneumatic Actuator. Specifications: Model# BC3#275722 Configuration: BC310 SK30 Travel: 30" This item is new no box. The original box came with two tol-o-matic actuators packaged inside which we have split into two eBay listings. ST1-3 15 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have ... moreany questions. Please ask. Shipping Weight: 15 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBa
|
|
YOU ARE LOOKING AT SVF COMPACT QUARTER TURN ACTUATOR H 25 SR 2C ALSO SVF HS25-2C. Please see all photos for details. You will get everything you see in the photos nothing more or less. For more information please contact us. 11-D001HYW CONDITION· Most of our items listed are posted and sold either AS-IS or WORKING. If sold“Working” you have 7 days from the date of arrival to test the item or items& notify us if it is not working. Failing to do so within the time frame will void any return or exchange policy that was offered. NO Warranty unless otherwise specified in description. There are no refunds or exchanges or returns for items that are sold AS IS. Please. Understand that we do not have the equipment, facilities, or time to fully test every item. If we say the item works, then ... moreit was tested to the best of our ability. It is your responsibility to verify the software or the capability of an item you purchase prior to purchasing it. To confirm it works with what you have. No refund will be given if item is working but not compatible with your equipment. In most cases this can be negotiated, but it must be done prior to your purchase. Items sometimes show the serial number. Due to the fact that sometimes we have multiple items for sale you might not get the one in the photo, the item will be in as good or better condition than the photo shown. All. Items and contents are described to the best of our ability. We examine all items and supply all available Make/Model information. We do not have time to get detailed information beyond what is stated in the listing but will try to answer all questions in a timely manner. POLICY& RETURNS· If you feel we have misrepresented an item. Please contact us either by email or telephone or through ebay and give us the opportunity to work it out with you. With most items you have 7 days from the date you receive the item or items to test& notify us if it is not working. However, some items are sold“AS IS” First. We will offer to repair or replace your ite
|
|
LINEAR AIR GUIDE CYLINDER SMC#MGGMB20-75-H7A2L-XC1 20MM[3/4" BORE X 75MM[2 15/16" STROKE*STROKE IS ADJUSTABLE* ALSO WITH A CYLINDER AND ROD CHANGE YOU CAN MAKE IT LONGER OR SHORTER. MOUNTING PLATE IS 3/8" THICK X 1 3/4" TALL X 3 1/2" WIDE BODY IS 2 3/16" TALL X 4 1/4" WIDE X 3 9/16" LONG THERE IS A CLAMP THAT CAN BE USED AS STOPS/STROKE ADJUSTER THERE ARE DEAD STOPS AND A SHOCK ABSORBER ON EACH END THERE IS A MAGNETIC RING ON THE PISTON ALL THREADS ARE METRIC THERE ARE MOUNTING HOLES ON THE BODY AND PLATE The series MGG guided cylinder is ideally suited for material handling applications involving stopping. Lifting, and pushing. It combines the functions of a conventional cylinder, linear motion guide, and non-rotation device. Features include built-in ... moreshock absorbers, finite stroke adjustment, bumpers, and switch capability. Other features include: Slide or ball bushing bearings available, built-in shock absorbers and stroke adjustments, high degree of non-rotating accuracy, and high load capabilities. THIS GUIDE CYLINDER IS USED BUT IS IN GOOD WORKING CONDITION. CHECK OUT ALL OF MY OTHER INDUSTRIAL COMPONENTS* View seller's other items Many of these items have been out of the box or on the shelf for a while. They may have some scratches and dents on them. But, if I say they are NEW, I mean they have never been used. JC. On Jun-27-13 at 08:22:21 PDT. Seller added the following information:
|
|
FESTO Air Cylinder DN-80-80-PPV 5013 P MAX 12BAR 174psi BORE APROXAMINTLY 3 1/4" Stroke APROXAMENTLY 3 1/4" SHAFT 1" dia CONDITION: USED but in good working condition We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast, easy, and secure way to pay online. On large items we may request certified funds only. WE ABSOLUTELY DO NOT SHIP OUTSIDE OF THE U.S. All shipping originates from 29710 zip code. We ship as soon as possible after payment is received. LOCAL PICKUPS ARE FREE AND ALWAYS WELCOME! COMMON CARRIER SHIPMENTS: Items going common carrier are generally shipped the next business day after payment is made. FREIGHT SHIPMENTS Large items that require an LTL shipment generally go out ... morethe next business day after payment is received. Some exceptions may apply. Larger items that must be shipped via flat bed truck will ship as soon as the truck can be secured. Usually no more than 3-5 business days. It is very important that the seller provide us with accurate shipping info on freight shipments, we must know if we will be shipping to a business, the business name, address, contact info, and if receiver has a way to unload the pallet/item or if we need to arrange for a lift gate. AUCTION SALES POLICY Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. RETURNS We guarantee items to arrive as stated in auctions. PLEASE ASK QUESTIONS BEFORE BIDDING! FEEDBACK We want our customers to be completely satisfied with their purchase. If anything about your transaction is not to your satisfaction, please contact us BEFORE leaving fee
|
|
Systems SMC Rotary Actuator. Rack& Pinion, Air-hydro Description Systems SMC Rotary Actuator. Rack& Pinion, Air-hydro CDRA1BWH100-180-A53ZS Rotary Table Made in Japan Made by SMC SPECIFICATIONS: Rotary Actuator. Rack& Pinion, Air-hydro Model CDRA1BWH100-180-A53ZS Magnet: D(Built-in Magnet) Mounting: B(Basic) Shaft Type: W(double Shaft) Size: 100mm Rotation Angle: 180 Auto Switch: A53-Reed. DC Volt 5 24 LED, 0.5M Lead Wire or Prewired Connector: Z(5mm) Number: S 91 pc) 2) Air-Hydro Unit Model CC63-200 S12-5D Nominal Size: 63mm Stroke: 200mm Size: S(Small Flow Style) Control Valve: 1(Speed Controller) Combination Valve: 2(Stop Valve) Voltage: 5(24VDC) Electrical Entry: D( DIN Terminal) Air Regulater/ Filter Model AR 4000/ AF 4000 Solenoid Valve Model VF 5120 Solenoid Valve Model ... moreVF 3230 Solenoid Valve Model NAV2000-N02-5DZ Shock Absorbers See Pictures for more info Overall Dimensions 23 x 11 x 36 in Approximate Shipping Weight 134 Lbs. WHEN BEING SHIPPED THIS ITEM WILL BE PLACED IN TO A WOODEN BOX FOR SAFE TRANSIT. THIS STRONG WOOD BOX WILL ADD 10- 20 LBS. IF YOU DO NOT WANT A WOODEN BOX PLEASE REMEMBER THIS IS A VERY SENSITIVE ITEM AND COULD BE DAMAGED DURING TRANSIT. Unit came from a working facility; it appears to be in working condition other wise noted in the description. Prospective bidders are welcome to inspect equipment under power at our Facility but please call for an appointment. Item is sold As- Is. $$ INTERESTED IN SELLING YOUR EQUIPMENT? $$ PLEASE CALL' 626) 330-4647- We'll buy from one machine to your entire plant to be listed on Ebay! SHIPPING A $3.50 Handling fee will apply for items between 1-7 lbs needing standard packing A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Items that require a std 4'x4' palle
|
|
|
BIMBA FS-040.625 RJ FLAT-1 Air Cylinder! WOW! Double Acting. Single End Rod This item appears to be used. In working condition. Selling AS IS Pictures below are of actual item for sale. Location X29 If you have any questions or require more pictures. Please contact me! NEXT DAY DELIVERY AVAILABLE- PLEASE CALL FOR DETAILS! Not what you are looking for? Visit our e-store!
|
|
Robohand RPS-18M-C Pneumatic Spring Assist Gripper In our is a Robohand Pneumatic Spring Assist Gripper(model: RPS-18M-C) Specifications: Model# RPS-18M-C Total Rated Grip Force@ 100 PSI. 7 bar: 2669 N Stroke: 31.8 mm Pressure Range: 3.4-7 bar Cylinder Bore: 63.5 mm Spring Direction: Spring Closed ST11-1-B 13 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 13 lbs. To calculate ... moreshipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be
|
|
|
DESCRIPTION: For sale in new condition but is old stock with some rust is a Rotac/Cadillac Gage Hydraulic Rotary Actuator. Item weights 26 pounds in a box. SPECIFICATIONS: Part# RN32-2V oil S/N 100441 Hydraulic rotary actuator 3380 in/lbs of torque@ 1000 PSI max input 100 degree rotation 1-1/4" Keyed dual output shaft 3/8" NPT Ports 4 bolt mount 14 Day Warranty
|
|
|
T-Damper for sale 2 openings are 14" square. 1 is 14" x 20" 2-Blade. Insulated and clad. Access door on unit. Beck Actuator Item is surplus off a thermal oxidizer. We will test and set limits before shipping. Provide us with your zipcode and we can supply you with a shipping quote.
|
|
|
08 6C Max psi unknown. Includes the mounting hardware and accessory pictured. Please email any questions or requests for additional pictures before purchasing. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior.
|
|
|
34 10F For toggle lever clamping system. Double-acting cylinder 189045, ND08, 10bar max, please email any questions or requests for additional pictures before purchasing. International Buyers– Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight(shipping) company or when you pick the item up– do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior.
|
|
|
DESCRIPTION: For sale in condition condition but old stock is a Parker Air Piloted Rotary Actuator. Item weights 70 pounds in a box. SPECIFICATIONS: Part# PTR326-0903F-AA23C 048120-03-96 90 degree rotation 1-3/4" keyed shaft 150 psi max input 3/8" NPT Cylinder ports 14 day warranty
|
|
|
DESCRIPTION: For sale gppd used condition is a Bellows Valveair Air Rotary Actuator. Item weights 15 pounds in a box. SPECIFICATIONS: Part# B471-1013 Air Piloted Rotary actuator 90 degree rotation 3/8" NPT ports Tang style female output shaft 14 Day warranty
|
|
|
Tol O Matic Model# BCES#51313 Config: BCES050 SPO4 SNSR S H SK12 LM SM 231 TS4 RC4 Customer pick ups are welcomed. No handling fee charged if picked up by buyer. And we will load your item for you. Items are located at the new, bright red building located three miles north of Adams, Friendship WI just north of the Hwy 21& Hwy 13 intersection. For other shipping options or any questions, call Dave Gibson at: 1 608 403 1133 or email Dave your question(s) with Ask a question under Seller info.
|
|
Turn-Act MN: TAC-B3439 Air Cylinder. Terms of Sale Systech. Inc. provides a 14-Day After Receipt of Product Warranty unless otherwise indicated. Buyer’s identified defective product shall be returned to Systech at Buyer’s expense. Buyer is responsible for obtaining return authorization from Seller. Full refund shall be issued after receipt. Inspection and serial number verification. Refund includes shipping paid outbound from Systech. Due to cost of administration. Purchased products returned due to no longer needed or Buyer purchased error shall be assessed 15% Unit Price) Restock Fee. Buyer is responsible for obtaining return authorization. Shipping paid outbound from Systech is not refundable. Systech ships via USPS and FedEx(Ground and Express) FOB Phoenix. Please contact Systech prior ... moreto paying for product if Express shipping is required. Buyer has option to select alternate transport carrier at Buyer’s expense. Buyer must arrange alternate shipping carrier. Acceptable Payment Methods are: PayPal; Visa; MasterCard or American Express. Credit Card payment is only accepted for domestic ship to locations. Unless otherwise approved by Systech. Local Pick up is acceptable. Applicable tax applies. We thank you in advance for shopping our Store and look forward to continued business with you. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
NEW BIMBA FOD-170.625 CYLINDER FOD170625_ C70
|
|
SMC NCQ2A25-50DC COMPACT CYLINDER 145PSI EXCELLENT CONDITION PHOTO IS ACTUAL ITEM W5C1C WARRANTY All equipment comes with a 6 month warranty. Equipment is guaranteed to be received as described in the listing or a full refund will be given upon return. SHIPPING Most items will be shipped the next business day after payment has cleared. The listed shipping and handling charges are for the continental US and include all Packaging. Handling, and Insurance fees/costs for regular orders. If equipment is needed to be shipped the same day. Evenings, weekends, or holidays, an additional fee will be added and we must be contacted by phone or email/message. We recommend you contact us directly for all international or freight shipments. Feel free to contact us if you are purchasing multiple items to ... moresee if your purchase qualifies for shipping discounts. PAYMENT Payment can be made with Paypal. Credit Card, Cashier's Check, Company Check, Personal Check, or Wire Transfer. Company Checks, Personal Checks and Wire Transfers must clear before equipment will be shipped. COMPANY PROFILE Remancenter buys and sells industrial electronic equipment for use in the manufacturing world. Our desire is to have the lowest prices of any remanufacturing company on the world wide web. Our primary goal is to satisfy the customer while remaining a profitable growing business. CONTACT INFORMATION 336-394-4600(Office) 336-394-4603(Fax) 336-340-4552(Emergency) Email) On Oct-25-12 at 17:34:13 PDT. Seller added the following information:
|
|
|
3 Parts for one price: 1) Durair II Remote Electric/air valve trip Model AP050 Electric Solenoid Max 145 PSI-4/175 F working temperature 2) Inline Flow Indicator Switch 3) W.A. Kates co. Model 2FA1-1 Differential Pressure Regulator Band- 150 PSI Volume Control Valve Max Working Pressure 300 PSI@ 100 F Customer pick ups are welcomed. No handling fee charged if picked up by buyer. And we will load your item for you. Items are located at the new, bright red building located three miles north of Adams, Friendship WI just north of the Hwy 21& Hwy 13 intersection. For other shipping options or any questions, call Dave Gibson at: 1 608 403 1133 or email Dave your question(s) with Ask a question under Seller info.
|
|
Title: Giben Air Cylinder Description: Our Internal Stock# F11-5(01-10-13 RN) You are about to purchase the following item: 1- Giben Air Cylinder. Used Catalog# C60-65-FP-AAP 4" Air Cylinder 3" Diameter Rod This unit was taken Directly from Working Service. Is Being Sold in GOOD WORKING Condition Due to some items having multiple quantities. Pictures may be representative of your item. To see a picture of the ACTUAL item you will be receiving, please email us and we will promptly send you a picture of your specific item. SAVE BIG $ $ $ $ $ WHEN YOU PURCHASE OUR INVENTORY. Payment& Shipping Info: Shipping Info: Shipping is based on buyers location; please use shipping calculator to determine the correct shipping cost to your destination. Buyer is responsible for ALL shipping fees ... moreincurred. We ship worldwide at great rates! Send us a message if you have a question about shipping your item. WE DO NOT CHARGE PACKAGING OR HANDLING FEES on items that can be shipped VIA UPS*We recommend that you contact us for correct shipping prices for large items. And shipping destinations out side of the Continental USA. Rates are subject to change and contacting us will ensure buyer receives purchased item with the correct shipping terms. We know that when someone buys an item from us. There is an urgency to receive that item. Therefore we strive to Pack and Ship the same day payment has cleared. All items are also available for pick up in person. Return Policy: Full 30 day return privilege on this item if found defective(freight prepaid by buyer) We will either replace item or refund money if found inoperable. Customer satisfaction is our main goal. If you are unsatisfied with any item you purchase. LET US KNOW, and we will be willing to either replace it or reimburse you for the total cost of what you paid. Payment: PayPal is our preferred method of payment. If you have a question on payment options. Please feel free to call us. Contact Information: First Choice Industrial Services. LLC 430 Cummings St NW Suite G Gr
|
|
|
SMC CYL FREE MT DBL ACTING A-SW CDUJB8-8DM Excellent working order and condition. Project Ready. Packaged safely. Shipped quickly. Contact us for shipping outside the 48 contiguous U.S. 377SMC
|
|
|
SMC Cylinder Slide Table MXS16L-20B Great working order. Minor aesthetic wear- priced accordingly. Project Ready. Packaged safely. Shipped quickly. Contact us for shipping outside the 48 contiguous U.S. 375SMC
|
|
|
SMC High Vacuum Valve XLG-25-M9NC Great working order and condition. Project Ready. Packaged safely. Shipped quickly. Contact us for shipping outside the 48 contiguous U.S. 374SMC
|
|
|
SMC Cylinder Slide Table MXS16-30A In great working order. Good condition, minor aesthetic wear only Project Ready. Packaged safely. Shipped quickly. Contact us for shipping outside the 48 contiguous U.S. 373SMC
|
|
|
SMC CYL GUIDE DUAL ROD 12-CSXL6-20-Y59A In great working order. Good condition, minor aesthetic wear only Project Ready. Packaged safely. Shipped quickly. Contact us for shipping outside the 48 contiguous U.S. 372SMC
|
|
|
SMC Cylinder Slide Table MXS12-20AS In great working order- project ready. Very good condition. Priced to save you money. Packaged safely. Shipped quickly. Contact us for shipping outside the 48 contiguous U.S. 370/1SMC
|
|
|
SMC CYL COMPACT AUTO-SW CDQ2F40-20DC In great working order- project ready. Very good condition. Priced to save you money. Packaged safely. Shipped quickly. Contact us for shipping outside the 48 contiguous U.S. 369SMC.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-1402bd0b094-0x103-
|
|
|
SMC CYL COMPACT DBL ROD CDQ2WB20-10DC In great working order- project ready. Some wear aesthetically only and priced accordingly. Packaged safely. Shipped quickly. Contact us for shipping outside the 48 contiguous U.S. 368SMC 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-1402bd0b0bc-0xf5-
|
|
Robohand Heavy Duty Rotary Actuator RR-56M-45 From our inventory. We are selling a Robohand Heavy Duty Rotary Actuator Specifications: Model# RR-56M-45 Max Payload: 13 kg(30 lbs) Torque: 35 Nm(311 in-lb) Rotation: 45 degrees More Information: ST11-1-C 13 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 13 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal ... moreas payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be shipped and arrive. Keep in mind that we are shipping i
|
|
Automax Valve Actuator w/ 1.5" SS Ball Valve. 275 psi@ 100F. Body stamped 1 1/2 R CF3M ITT Camtite 300 2218, Metal Tag: CL 150, Butt Weld SS, V-5BD-07, 91-59341 3113-1-7 ST. ST. Peek-Graphite, Body& Cover ASTMA 351-CF3M, S-204390, Valve Tag No. HV-FP5-182-5. Sr 91-59341-10-6 yr 1991, ITT Engineered Valves, This unit has quick change bolts and mounting hardware, Actuator& Valve appear to be NOS or Reconditioned? list as- Used in excellent condition. 110312z132- shipping weight 60# See our Ebay Store for additional valves. Regulators& fittings. August Industries. Inc. is dedicated to providing an accurate and detailed description of the features and flaws of all items sold. All items will be sold"as is" with no warranty implied or intended. In the unlikely event that ... morewe fail to detail a serious flaw please contact us at once after receiving the item, we will make every effort to correct the error. Thank You
|
|
Automax Valve Actuator w/ 2" SS Ball Valve, 275 psi@ 100F. Body stamped 2 R CF3M ITT Camtite 300 2219, Metal Tag: CL 150, Butt Weld SS, V-5BD-07, 91-59341 3113-1-7 ST. ST. Peek-Graphite, Body& Cover ASTMA 351-CF3M, S-204390, Valve Tag No. HV-FP1-141-4. Sr 91-59341-9-5 yr 1991, ITT Engineered Valves, This unit has quick change bolts and mounting hardware, Actuator& Valve appear to be NOS or Reconditioned? list as- Used in excellent condition. 110312z135- shipping weight 65# See our Ebay Store for additional valves. Regulators& fittings. August Industries. Inc. is dedicated to providing an accurate and detailed description of the features and flaws of all items sold. All items will be sold"as is" with no warranty implied or intended. In the unlikely event that we fail ... moreto detail a serious flaw please contact us at once after receiving the item, we will make every effort to correct the error. Thank You
|
|
|
Brand: Bimba Condition: Used Model: BFT-173-D Type: Double Acting Stroke Size: 3 IN Bore Size: 1-1/2 IN Weight: 2 lbs Dimensions: 11 X 3 X 3 SKU: B200873 Additional Notes:
|
|
|
BIMBA PFC-091-P Position Feedback Cylinder! WOW! This item appears to be new. Selling AS IS Pictures below are of actual item for sale. Location X40 If you have any questions or require more pictures. Please contact me! NEXT DAY DELIVERY AVAILABLE- PLEASE CALL FOR DETAILS! Not what you are looking for? Visit our e-store!
|
|
|
Comp 4 Act Actuator SVF(F.C.I) H15SR-1B Series Z608 120 Psi. 8 Bar 3/4" SVF S/S Ball Valve Used*Note* We sell in store as well as Ebay. Check Quantity.
|
|
KOGANEI CDAS20x50-B-R Pneumatic Air Cylinder Stroke: 50 mm Normal 0 21 false false false ES-MX X-NONE X-NONE MicrosoftInternetExplorer4 KOGANEI CDAS20x50-B-R Pneumatic Air Cylinder Stroke: 50 mm Made by KOGANEI Model CDAS32x40-B-R-G Made in Japan Good Condition Stroke:50 mm See Pictures for more info Overall Dimensions 1.4 x 1.4 x 4.2 in Approximate Shipping Weight 1 Lbs. andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Ups Ground International shipping: Weight based Shipping Charges. International Carriers are: Usps Priority Intl I will ship to: United States. Worldwide[Weight] 2 lbs. Shipping and Handling: Customer Service Policy: A $3.50 Handling fee will apply for items between 1-7 lbs needing standard ... morepacking A $4.75 Handling fee will apply for items between 7-20 lbs needing standard packing A $7.00 Handling fee will apply for items between 21-35 lbs needing standard packing A $9.00 Handling fee will apply for items between 36-80 lbs needing standard packing Handling fees are subject to change if item(s) are oversized. Items that require a std 4'x4' pallet will have a $25.00 fee. Please call for pricing on items that require custom skid or custom crating. We encourage our customers to arrange their own shipping on items that cannot be shipped through FedEx ground(items over 150 Lbs) There will be a local pick-up fee for items purchased after 10/20/2008* Please contact us at 626-330-4647 if you would like to combine items to save on shipping and handling. We encourage customers to use there FEDEX/ UPS/ USPS account to ship out items. All items can be picked up and are shipped from 14911 Don Julian Rd. City of industry, CA 91746 626-330-4647 Payment Policy: PayPal: Yes we do accept paypal payments for all items being shipped out. IF you are picking up the item or having a friend pick up the item it must be paid in person at time of pick up. ALL NEW AND OLD BUYERS MUST CALL BEFORE PICKING UP ANY ITEM. 1MachinerySales.co
|
|
|
◊◊◊◊◊ NORGREN ◊◊◊◊◊ RLE06A-DAN-AA00 Double Action Nonrepairable Air Cylinder 1.25" Bore Size 6" Stroke Length 1/8" Port Size 0.437" Rod Diameter NPTF 10.750" Length 3/4-16 Mount 7/16-20 Rod Thread size RETAIL OVER $65! FREE PRIORITY MAIL SHIPPING! THIS LISTING INCLUDES ONLY THE ITEMS SHOWN IN THE PICTURES Local pick up is always welcomed. Our goal is satisfied customers! If there is anything we can do. Please just ask.
|
|
|
USED GSI VACUUM WAFER CHUCK SP-020 300MM SHIPPING Normally it will take 10-13 working days PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. PAYMENT Pament must be received prior to shipping by PAYPAL ONLY. Thanks for visiting! CLICK HERE! TO VISIT OUR STORE TO SEE MORE INTERESTING ITEMS. The cigarette and the ruler are not included. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
USED GSI VACUUM WAFER CHUCK SP1-0304-CM-0048 282.1075.03 300MM SHIPPING Normally it will take 10-13 working days PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. PAYMENT Pament must be received prior to shipping by PAYPAL ONLY. Thanks for visiting! CLICK HERE! TO VISIT OUR STORE TO SEE MORE INTERESTING ITEMS. The cigarette and the ruler are not included. Click Here. Double your traffic. Get Vendio Gallery- Now FREE! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
AES ENGINEERED SYSTEMS AIR CYLINDER AES BROUGHTON 6T34651 32A BODY WIDTH: 2.5" ROD DIAMETER: 1/2" STROKE: 12.5" approx, BODY LENGTH: RETRACTED-18" EXTRACTED-30.5" approx, CONDITION: USED- GOOD WORKING CONDITION. Auction Sales Policy: WE STAND 100% BEHIND ALL ITEMS SOLD- NO DOA GUARANTEE Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: We ship as soon as ... morepossible after payment is received. Generally within 1-2 business days. WE SHIP FEDEX GROUND. PLEASE CONTACT US FOR EXPEDITED SHIPPING. INTERNATIONAL BUYERS: We would prefer to ship billed to your Fedex. DHL, or UPS account. Please contact us if we need to make other arrangements. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast. Easy, and secure way to pay online. Returns Warranty Information: Unless Sold“As-Is. all of our products come with a 7 Business Day Warranty, beginning the day item is received. Returns are only accepted on items received in different condition than stated in the ad. If your item is received in a different condition than stated(DOA, not working properly etc… please call us immediately. We are more than happy to rectify any problems by replacing the item or issuing a refund. Feedback: We want our customers to be completely satisfied with their purchase. If anything about your transaction is not to your satisfaction. Please contact us BEFORE leaving feedback, inform us of the issue, and we will do our best to resolve the problem to your satisfaction in order to receive positive feedback. We thin
|
|
PARKER CYLINDERS 02.00 C2AUS34A 5.000 SER. 2A 250 PSI, BODY WIDTH: 2 1/2" ROD DIAMETER: 1" STROKE: 5" aaprox, BODY LENGTH: RETRACTED-11 1/2" EXTRACTED-16 1/2" approx, CONDITION: REBUILT. GOOD WORKING CONDITION. Auction Sales Policy: WE STAND 100% BEHIND ALL ITEMS SOLD- NO DOA GUARANTEE Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: We ship as soon as possible ... moreafter payment is received. Generally within 1-2 business days. WE SHIP FEDEX GROUND. PLEASE CONTACT US FOR EXPEDITED SHIPPING. INTERNATIONAL BUYERS: We would prefer to ship billed to your Fedex. DHL, or UPS account. Please contact us if we need to make other arrangements. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast. Easy, and secure way to pay online. Returns Warranty Information: Unless Sold“As-Is. all of our products come with a 7 Business Day Warranty, beginning the day item is received. Returns are only accepted on items received in different condition than stated in the ad. If your item is received in a different condition than stated(DOA, not working properly etc… please call us immediately. We are more than happy to rectify any problems by replacing the item or issuing a refund. Feedback: We want our customers to be completely satisfied with their purchase. If anything about your transaction is not to your satisfaction. Please contact us BEFORE leaving feedback, inform us of the issue, and we will do our best to resolve the problem to your satisfaction in order to receive positive feedback. We think
|
|
HYDRO LINE CYLINDERS HR5DC-2X24 B-1-2-S-N-N-1-1 392060077-1 BODY WIDTH: 2" approx ROD DIAMETER: 1" approx STROKE: 24" approx BODY LENGTH RETRACTED: 31" approx BODY LENGTH EXTRACTED: 55" approx CONDITION: REBUILT. GOOD WORKING CONDITION. Auction Sales Policy: WE STAND 100% BEHIND ALL ITEMS SOLD- NO DOA GUARANTEE Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: ... moreWe ship as soon as possible after payment is received. Generally within 1-2 business days. WE SHIP FEDEX GROUND. PLEASE CONTACT US FOR EXPEDITED SHIPPING. INTERNATIONAL BUYERS: We would prefer to ship billed to your Fedex. DHL, or UPS account. Please contact us if we need to make other arrangements. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast. Easy, and secure way to pay online. Returns Warranty Information: Unless Sold“As-Is. all of our products come with a 7 Business Day Warranty, beginning the day item is received. Returns are only accepted on items received in different condition than stated in the ad. If your item is received in a different condition than stated(DOA, not working properly etc… please call us immediately. We are more than happy to rectify any problems by replacing the item or issuing a refund. Feedback: We want our customers to be completely satisfied with their purchase. If anything about your transaction is not to your satisfaction. Please contact us BEFORE leaving feedback, inform us of the issue, and we will do our best to resolve the problem to your satisfaction in order to receive p
|
|
KANDANT OSAILLATOR 6T34664 BODY WIDTH: 2 1/2" approx ROD DIAMETER: 1/2" approx STROKE: 7" approx BODY LENGTH RETRACTED: 11.5" approx BODY LENGTH EXTRACTED: 18 1/2" approx THESE ITEMS DO NOT HAVE THE NAME BRAND KANDANT. WE GOT THESE IN A LOT OTHERS THAT LOOK EXACTLY LIKE IT HAVE THIS MODEL NUMBER ON IT. CONDITION: REBUILT. GOOD WORKING CONDITION. Auction Sales Policy: WE STAND 100% BEHIND ALL ITEMS SOLD- NO DOA GUARANTEE Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. ... morePayment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: We ship as soon as possible after payment is received. Generally within 1-2 business days. WE SHIP FEDEX GROUND. PLEASE CONTACT US FOR EXPEDITED SHIPPING. INTERNATIONAL BUYERS: We would prefer to ship billed to your Fedex. DHL, or UPS account. Please contact us if we need to make other arrangements. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast. Easy, and secure way to pay online. Returns Warranty Information: Unless Sold“As-Is. all of our products come with a 7 Business Day Warranty, beginning the day item is received. Returns are only accepted on items received in different condition than stated in the ad. If your item is received in a different condition than stated(DOA, not working properly etc… please call us immediately. We are more than happy to rectify any problems by replacing the item or issuing a refund. Feedback: We want our customers to be completely satisfied with their purchase. If anything about your transaction is not to your satisfaction. Please contact us BEFORE leaving feedback, in
|
|
KANDANT OSAILLATOR 12T BODY WIDTH: 2 1/2" approx ROD DIAMETER: 1/2" approx STROKE: 7" approx BODY LENGTH RETRACTED: 11.5" approx BODY LENGTH EXTRACTED: 18 1/2" approx THESE ITEMS DO NOT HAVE THE NAME BRAND KANDANT. WE HAVE SEVERAL OTHERS THAT LOOK VERY SIMILAR THAT ARE KADENT BRAND. CONDITION: USED- GOOD WORKING CONDITION Auction Sales Policy: WE STAND 100% BEHIND ALL ITEMS SOLD- NO DOA GUARANTEE Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within ... more7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: We ship as soon as possible after payment is received. Generally within 1-2 business days. WE SHIP FEDEX GROUND. PLEASE CONTACT US FOR EXPEDITED SHIPPING. INTERNATIONAL BUYERS: We would prefer to ship billed to your Fedex. DHL, or UPS account. Please contact us if we need to make other arrangements. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast. Easy, and secure way to pay online. Returns Warranty Information: Unless Sold“As-Is. all of our products come with a 7 Business Day Warranty, beginning the day item is received. Returns are only accepted on items received in different condition than stated in the ad. If your item is received in a different condition than stated(DOA, not working properly etc… please call us immediately. We are more than happy to rectify any problems by replacing the item or issuing a refund. Feedback: We want our customers to be completely satisfied with their purchase. If anything about your transaction is not to your satisfaction. Please contact us BEFORE leaving feedback, inform us of the issue, an
|
|
HANNA CYLINDERS MIFI 3ACB 1.50 7.00 DSM1A K09606501, EE100-00002, 2" BODY WIDTH, 3/4" ROD DIAMETER, 7" STROKE 22" BODY LENGTH EXTENDED, 15" RETRACTED, CONDITION: USED. GOOD WORKING CONDITION. Auction Sales Policy: WE STAND 100% BEHIND ALL ITEMS SOLD- NO DOA GUARANTEE Your bid is a contract- Place a bid only if you're serious about buying the item. If you are the winning bidder. You will enter into a legally binding contract to purchase the item. If the seller is unable to establish contact with the winning bidder within 3 days of the end of the auction, item may be offered to the next highest bidder or relisted. Payment is due within 7 days of purchase unless otherwise discussed between buyer and seller. Shipping Details: We ship as soon as possible after payment ... moreis received. Generally within 1-2 business days. WE SHIP FEDEX GROUND. PLEASE CONTACT US FOR EXPEDITED SHIPPING. INTERNATIONAL BUYERS: We would prefer to ship billed to your Fedex. DHL, or UPS account. Please contact us if we need to make other arrangements. Payment Details: We gladly accept PayPal. Certified Funds, or Cash for local pickups. We do NOT accept personal or business checks. Sign up for PayPal; the fast. Easy, and secure way to pay online. Returns Warranty Information: Unless Sold“As-Is. all of our products come with a 7 Business Day Warranty, beginning the day item is received. Returns are only accepted on items received in different condition than stated in the ad. If your item is received in a different condition than stated(DOA, not working properly etc… please call us immediately. We are more than happy to rectify any problems by replacing the item or issuing a refund. Feedback: We want our customers to be completely satisfied with their purchase. If anything about your transaction is not to your satisfaction. Please contact us BEFORE leaving feedback, inform us of the issue, and we will do our best to resolve the problem to your satisfaction in order to receive positive feedback. We think good communication
|
|
|