|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Burbank, United States
Buy It Now
Free Shipping
Condition: New Location: Cincinnati, United States
Bag of 100. FREE Trial!
0 bids Free Shipping
Condition: Used Location: Marble Falls, United States
USA so dont even ask.
0 bids Free Shipping
Condition: Used Location: Marble Falls, United States
Used, tested working. USA so dont even ask.
Buy It Now
$3.69 Shipping
Condition: Used Location: Panorama City, United States
Source: Flojet Corporation The Model 1500-030A, Transfer Valve automatically changes from an empty to a full bag without interrupting syrup flow. It is vacuum-operated, with a snap-action diaphragm.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
1/4" Brass Hose Barb. CO2/air inlet fitting.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
KIT LABEL FLAVOR SELECT ADA.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
Buy It Now
$4.99 Shipping
Condition: Used Location: Allentown, United States
Coke Bib Connectors---Lot of 3. Bag in Box.
Buy It Now
Free Shipping
Condition: Used Location: Marble Falls, United States
New in box.AS-IS. USA so dont even ask.
0 bids $7.51 Shipping
Condition: Seller refurbished Location: Brighton, United States
These are refurbished and fully tested. These are rated at 7.2A 120VAC, 1/3 HP 120VAC. The motor is driven by a large stud Triac. Below are the seven connections More are available!
0 bids Free Shipping
Condition: New Location: Kansas City, United States
0 bids $15.00 Shipping
Condition: Used Location: Marble Falls, United States
NOS, light scuffs/dings from rough handling. USA so dont even ask.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
HARNESS WIRE SGL PL AIR
Buy It Now
Free Shipping
Condition: New – Open box Location: Fort Worth, United States
Package includes:The Jay Companies Beverage Dispenser 1.5-Gallon Capacity Glass Jug Galvanized Base & Lid
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
3/8 FEMALE FLARE COMPRESSION NUT TO 1/4 BARB.
Buy It Now
$4.10 Shipping
Condition: New Location: Panorama City, United States
Here is a 3/8" barb input fittings for a Wunder-Bar soda gun. Buy as many as you want just specify what length you want.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
TUBE TO HOSE STEM 3/8 STEM OD 3/8 HOSE ID LONG.
Buy It Now
Free Shipping
Condition: New Location: Cincinnati, United States
Bag of 50. FREE Trial!
Buy It Now
Free Shipping
Condition: New Location: Cincinnati, United States
Bag of 100. FREE Trial!
Buy It Now
Free Shipping
Condition: New Location: Cincinnati, United States
Bag of 25. FREE Trial!
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
SHURFLO SERVICE PUMP. CO2 air inlet/ air outlet. Brass Elbow Fitting. Elbow with the internal check valve and o-ring. CCP Part# 22149.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
3/8 MALE PIPE THREAD TO 3/8 MALE FLARE ADAPTER SS.
0 bids $4.10 Shipping
Condition: Used Location: Panorama City, United States
They are used cleaned and tested coke bag in box fittings. they are in excellent used condition. The barb size is 3/8th.
Buy It Now
Free Shipping
Condition: New Location: Salinas, United States
Expiration date is 11/22/22. All sales are final.
Buy It Now
Free Shipping
Condition: New – Open box Location: Sedalia, United States
629097551 Cornelius Kit Nozzle Diffuser Idc Pro Genuine OEM ICO2583589. (B2)
Buy It Now
$7.00 Shipping
Condition: New Location: Scottsdale, United States
Buy It Now
Free Shipping
Condition: New Location: Evansville, United States
Parker Part Number: 316GH-12-12N. NSF Certified. Made in U.S.A.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
CCP# 119307. Wunderbar Bar Gun, Soda Gun. VALVE SPRING. THIS IS FOR ONE SPRING. YOU WILL GET ONE SPRING NOT THE WHOLE BAG. ONE SPRING.
0 bids Free Shipping
Condition: New Location: Clearfield, United States
Wrench, Co2 tank, OFFSET CO2 REGULATOR NUT WRENCH, 9", CCP#16797.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
FITTING, 3/8" SS BARB 45 DEGREE DOUBLE O-RING ASSEMBLY.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
Buy It Now
Free Shipping
Condition: New Location: Ogden, United States
Buy It Now
Free Shipping
Condition: New Location: Addison, United States
Use genuine OEM parts for safety reliability and performance. Wunder-Bar 0111-548 Nozzle Assembly - Large Particulate. This is a geniune OEM part from Wunder-Bar.
Buy It Now
Free Shipping
Condition: New Location: Cincinnati, United States
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
DECAL SEAGRAM'S GINGER ALE LEV SINGLE LABEL.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
Stainless Barb to Barb 90 degree elbow. 3/8" Barb x 3/8" Barb. CCP Part# 12939.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
Coca Cola Part# 12956. 3/8" Barb x 3/8" Barb x 3/8" Barb.
Buy It Now
$1.99 Shipping
Condition: New Location: Hartford, United States
Made to work with the 3/8 Nuts. Set of (2) Two.
Buy It Now
Free Shipping
Condition: New Location: Addison, United States
Wunder-Bar 0111-303 Turntable Assembly - 18" Flat Pan. This is a geniune OEM part from Wunder-Bar. Use genuine OEM parts for safety reliability and performance.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
0 bids Free Shipping
Condition: Used Location: Marble Falls, United States
Used, all tested working, but one has a broken plastic face where the coin slot is on top. USA so dont even ask.
0 bids $39.99 Shipping
Condition: Used Location: Battle Creek, United States
Why buy new?. Then, we will re-list the item.
Buy It Now
Free Shipping
Condition: New Location: Farmington, United States
3 FLOJET G55 CO2/AIR DRIVEN BIB PUMP KIT COMPLETE. Condition is New. Shipped with FedEx Ground or FedEx Home Delivery.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
CLAMP EAR 15.3MM (Set of 10).
0 bids $9.95 Shipping
Condition: Used Location: Allentown, United States
Flojet BIB syrup pump P5000551, T5000192. with mounting bracket.
Buy It Now
$5.00 Shipping
Condition: New Location: Conroe, United States
Flojet Syrup Out 1/4" Barbed Stainless Steel Fitting Brand New
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
HARNESS WIRE BIN THERMOSTAT
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
GROMMET BIN CONTROL
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
【 PREMIUM 304 STAINLESS STEEL 】 - The whole juice dispenser is made of superior 304 stainless steel,high - pressure resistance, and easy to clean. There are 3 types of juice dispensers you can choose,including 10L x 3 tanks (270W),10L x 4 tanks (325W ).
Buy It Now
Free Shipping
Condition: New – Open box Location: Odenville, United States
NEW WITHOUT ORIGINAL PACKAGING! Cornelius Soda Fountain Valve with chrome lever. Also comes with Installation instructions and replacement O rings.
Buy It Now
Free Shipping
Condition: New Location: Athens, United States
I take photos of the exact item that you will get, unless I state otherwise.
Buy It Now
Free Shipping
Condition: Used Location: Phoenix, United States
Of course, it's possible for unnoticed details to fall through the cracks but for the most part we try to be really careful about this.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
DECAL COKE ZERO LANCER LEV 6/SHEET.
Buy It Now
Free Shipping
Condition: New Location: Pennsauken, United States
NEW LANCER SODA VALVE NOZZLE For LEV4.5 Valve AX# 82-2014/03-SP. SV-5 DRAW 4 DBR. WE ARE HAPPY TO HELP!
0 bids Free Shipping
Condition: New – Open box Location: Paradise, United States
INTERNATIONAL AND CANADA! I do show the label when available so you can see the part number. Part Number: PH10-74-062.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
CAPACITOR ST 145-174 AT 250.
Buy It Now
Free Shipping
Condition: New Location: Hartford, United States
ICE LEVEL SENSOR SET
|
|
|
All Items Are Sold AS IS ~All items Have Not Been Tested Unless Otherwise Specified In The Description~Good Luck And Happy Bidding! You are viewing: Servend MD200 Countertop Ice Beverage Soda Dispenser Please read and understand the following before bidding: WE SPECIALIZE IN USED RESTAURANT EQUIPMENT. OUR ITEMS RANGE FROM SLIGHTLY USED TO EXTREMELY USED, HOWEVER, ALL ITEMS WE PURCHASE AT LOCAL AUCTION OR TAKE INTO CONSIGNMENT AND SELL FOR OUR CUSTOMERS WERE IN GOOD ENOUGH CONDITION FOR US TO BUY OR SELL AND THEREFORE ARE IN GOOD ENOUGH CONDITION FOR US TO SELL TO YOU. THAT BEING SAID A LL ITEMS ARE SOLD AS-IS; WE OFFER NO WARRANTY OR GUARANTY ON OUR ITEMS AND STRONGLY SUGGEST THAT YOU PURCHASE COVERAGE ON YOUR ITEM WHETHER YOU ARE ARRANGING YOUR OWN SHIPPING OR YOUR ITEM IS BEING SHIPPED VIA ... moreUPS GROUND. BEFORE BIDDING YOU CAN CONTACT US IF YOU WOULD LIKE TO PURCHASE UPS COVERAGE ON YOUR ITEM. IN ALL CASES PLEASE DO NOT PAY UNTIL WE HAVE INVOICED YOU. No shipment or shipping arrangements are provided for larger(100 lb and over) if you are not picking up locally. The arrangement of shipment and delivery are entirely the responsibility of the winning bidder! YOU CAN CONTACT: GRANT AT UNISHIPPERS DIRECTLY FOR A SHIPPING QUOTE AT(954) 634-5995 or(305) 707-4423· Item is sold AS-IS. No refunds or exchanges unless you can convince me you bid on one item and received a completely wrong and blatantly misrepresented item. As in, you ordered a giant stainless steel Walk in freezer and received a spoon. Please bid carefully! These items are either local AUCTION purchased items or taken out of closed or remodeled restaurants. All items were purchased by us in assumed working condition. Not to sound redundant but again. We are not sure of the condition, some used items may have dings and scratches, some items might need a sponge bath. We like to be as honest as possible and tell it like it is. If this is not agreeable to you this perhaps this is not the auction for you. Your item will ship out as soon as your pay
|
|
SODA SYSTEM 6 FLAVOR SODA FOUNTAIN SYSTEM Ice& Beverage Dispenser PRICE $ 1.425.00 + Shipping Six(6) valve soda fountain system with built in ice bin(holds approx. 125+lb. of ice) Built-in cold plate. Cold plate cooling is very efficient easily maintains product quality during high dem and. This system has been set up to dispense six(6) flavors. Equipped with a push button activated ice dispenser. Dispenses product from lever electronic valves(buyer can choose flavor selection) Attractive marquee. Very simple hook-up. The lines have been pre-assembled& labeled. ALL of the fittings have been professionally clamped for easy re-installation. ALSO INCLUDED: A Complete set of Co2 regulators(Primary and Secondary gauges) high pressure hosing. Carbonator. 6) syrup pumps with mounting board. ... moreBIB hose& BIB connectors. We offer FREE phone installation support and a pdf manual with a start up video for easy installation. What you need to supply: Electricity. CO2, Syrup, Ice, Main Water Hook-Up. We will help you locate these items) This is a remanufactured system. All the tubing is new. We pressure test. Performance test, and bring each component back to manufacturer's specs. The components were previously used so they may have minor dings and scratches due to normal use. FEATURES Six Flavor Soda Fountain Dispenser Completely Pre-Assembled Ready To Install Built-in Cold Plate/ Ice Bin Lever Electronic Valves(6) Syrup Pumps w/ Mounting Board Carbonator Measures 24" W x 32" H x 23" D w/ 5" Drain Tray Complete Set Of CO 2 Regulators See Shipping Rates At Check Out 704-827-7400 ALL YOU NEED IS CO2. SYRUP, ELECTRICITY& WATER
|
|
|
Cornelius CB2323 fountain drink beverage dispenser and ice bin. It is single phase. 115 volts, rated at 12 amps. The dimensions are 56 H x 25 D x 25 L. It stands on legs. The ice bin is made by McCann and the model# is 16-1321. It has 6 soda dispensing heads with push bar dispensing and 80lb ice bin with cold plate. AS IS.
|
|
Used IMI Cornelius 8 Head COKE Fountain Dispenser W/Ice Storage FREE FREIGHT! If you buy it with Buy It Now Price) This equipment has been tested and is in a very good condition cosmetically and functionally. This beverage dispenser works good.Cleaned inside and outside. No damage or any dirt around. Please check with manufacturer or call us for full specs. The information we found on the description panel is below: Stock Manufacturer Model Serial No. Description Size 10326, IMI CORNELIUS, ED-200BC, N/A, 115V/60HZ.AMPS3.5/1PH. 30X31X40, Shipping Method: Freight If the listing states that it's free shipping. It's only valid for Buy it Now price. Please ask the shipping rates if you buy it with Best Offer. Most orders will ship within 1 business day after payment has cleared. We encourage ... moreyou to call and pay via Credit Card or PayPal to expedite shipping! We Ship to the continental 48 states only. Sorry. No APO/FPO or PO Box Delivery If you require Liftgate Delivery. Please add $75 for this service. Crating fee may apply depending on the size of the equipment. There is $85 fee for Residential Delivery as well. Save Money! We have 25.000 sq ft warehouse full of restaurant equipment. Buy multiple auctions and we will combine your shipping. Which saves a great deal of money! It is your responsibility to inspect all shipments for damage before you sign for the shipment. If the item is damaged. You need to alert the shipping company immediately, and DO NOT SIGN for the item. Terms and Conditions: Terms are upon receipt; payment for all deliveries is due upon receipt. Payment required within 3 business days after auction ends. Any and all discrepancies. Shortages, overages, damages, or damaged cartons should be indicated at the time of delivery. Returns are at the discretion of Best in Town. If accepted. Prior authorization must be obtained to return any equipment. Authorized returns for credit must be prepaid and be received by Best in Town within 10 working days of purchase. Credit will be based on invoice pric
|
|
| Search: Specifications SKU: 142420, Manufacturer: Cornelius-Beverage, Model: CB2323AK8, List price: $4.306.00 Weight: 167 lbs. Width: 23.25 in. Depth: 24.75 in. Height: 45 in. Powered by: 115 volts, Phases: 1 Our Store Categories effepbdc Finance This Equipment For Your Business Available for purchases totalling $2.000 or more Used Cornelius-Beverage CB2323AK8 Drop In 8 Head Soda Beverage Dispenser w/ Ice Storage Bin We do not accept offers containing any messages FREE SHIPPING! To receive Free Shipping. This item must be completely paid for at the time of checkout. Offer does not include packing, handling, lift gate fees, residential delivery fees, or taxes. Valid only for Customers within the 48 Contiguous States ZipCode: Restaurant Equipment warehouse located in Norcross. GA 30093, Customer ... morePick Up Available( Directions to our Restaurant Equipment Warehouse) This soda unit could be used in any restaurant. Bar, deli, diner, or other food service establishment. This model has some great features and benefits, such as: 8 Soda dispensing heads Easy to use push bar operation Overflow container Ice bin that measures 23"W x 23"D x 14"H Cold plate integrated into ice bin Pepsi product nozzle display covers. Model: CB2323AK8 The manufacturer's spec sheet for this model reads: Drop-In Soda Dispenser. 8) pre-mix valves on s/s tower, 9.75" cup clearance, 23" x 23" 80 lb cap. ice bin, s/s interior& exterior, built-in drip tray. This item is used and has some surface scratches and discoloration. The mounting hardware is not included. This listing is for the main portion of a soda system. Other components are needed such as a carbonator pump. Syrup pumps(one per flavor) co2 tank, soda lines, regulators, and maybe more. This item has been tested by a Restaurant Equipment Technician and appears to be working well. This item weighs 167 lbs. but we have added 50 lbs. to the weight for packing and shipping. Prior to placing your bid on this item please use the Shipping Calculator provided a
|
|
|
This auction is for a well used. All original, vintage syrup dispenser, white porcelain case, chrome pump, white button dial is missing and the spot is empty, found in a box in the barn(look at my other auctions for all the dispensers for syrup and sauce) had bought the contents of an old malt shop years ago and these have been sitting unused, dirty and needs to be cleaned, measures approximately 4 1/2" wide x 14 1/2" deep x 7" high, no cracks, no chips, no crazing, looks like the soda jerk was careful when pulling out the pump, some flea bites, lots of tarnish on the chrome, the chrome pump is marked The Russ Manufacturing company, from a smoke free home. Powered by dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13d6df022a3-0xf0-
|
|
|
Offering a soda dispenser that was in an old soda shop. Handles work good. It has threaded nut to install to bar/counter. All in great condition. Needs a good cleaning. It is about 24" tall. it will ship by UPS or Fedex due to weight. USPS more expensive. The legal stuff: I buy merchandise from estate sales. Flea markets, auctions, and good old picking. So please look at photos and ask questions before you bid I want us both happy. I strive for 5 star performance. Payment due within 5 days. Unpaid case opened after 7 days. Good Luck.
|
|
|
Your buying a 1 shurflo brix pump 5 to 1 mix. I have 6 avaliable. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
SHURflo WATER BOOST SYSTEM 804-023 h This has been tested and is in excellent working condition. Cosmetically this comes exactly as shown in the pictures. The pictures are used to describe the cosmetics, each picture can be enlarged by clicking on it. Additional pictures are located at the bottom of the ad. We try our hardest to give 5-Star Service by giving Clear. Accurate and Honest descriptions to the best of our abilities. We also clearly state our return policies and shipping terms upfront so you know what to expect. If you are pleased with this transaction. Please respond with all 5 Stars! If you are not pleased for any reason, Please contact us using the Contact Seller link on the auction page, and we'll try and make it a Five Star Sale! Sales within the State of Colorado Will have ... moreState and local tax applied where applicable. We take care to pack your items professionally. Therefore items can take up to 7 days or more to ship after payment has cleared when we are backed up. Typically it is only a couple of days after but it does very through the seasons. If there is a critical need for immediate shipping(24 hours from time of payment, Monday through Friday) please let us know immediately after payment has been made. No C.O.Ds please.Payment due within 7 days of auction end. f3d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3Ef3d-13e92003ffe-0x101-
|
|
|
1/4" barb nut hose connector stainless steel fitting FREE SHIPPING. This auction is for a total of 1 fittings in nice condition. Any problems just email me and I will take care of it. Thanks.Chip
|
|
|
3/8" barb stainless steel inlet/ outlet flow fitting for Shurflo pump FREE SHIPPING. This auction is for a total of 2 fittings in nice condition. Any problems just email me and I will take care of it. Thanks.Chip,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*4a24%60%3C%3E-13f00891c98-0xf3-
|
|
|
Eight(8) valve drop-in soda fountain. Excellent for concession trailers. Measuring 18" D X 24" W. The system with ice bin(holds approx. 60+lb. of ice) and cabinet. Has a built-in cold plate for efficient cooling. The system is capable of quick recovery and can handle high volume applications if needed. Product is consistently dispensed frosty cold. Set up to dispense eight(8) flavors. All 8 valves dispense post mix/ Bag-N-Box product. Equipped with'UF1' fast-flow valves. Available with or without Pepsi Merchandiser
|
|
|
LOCAL PICKUP- TAMPA. FLORIDA OR CONTACT BUYER TO ARRANGE FOR FREIGHT SHIPPING(BUYER PAYS ALL SHIPPING COST) Up to 16 drink flavors. Dispening ice fountain machine. Carbonator included. All syrup pumps& rack include(just purchase lines and product and your ready to make money$$) Ice O Matic- 600 pounds per day. With remote condensor. Works great- good shape See all the attached pictures for the different items that are included in the purchase GREAT DEAL- WONT LAST FOR LONG. Posted with Posted with Posted with Posted with
|
|
This is a used in great condition dual gauge Tap-rite professional grade unit which includes as a bonus a Cage protector that cost about 24.99 and dual gauge runs for around 60-75 bucks new shipping includes tracking and insurance Primary CO2 Gas Regulator Double Gauge Beer Regulator This durable CO2 regulator is designed for all draft beer systems and for soda-making from a CO2 tank. It features dual gauges to measure the pressure level in the tank and the outgoing pressure to the keg/soda. The pressure level can easily be adjusted with a screwdriver and it also includes a pressure relief valve for safety. Features: Double Gauge Pressure Relief Valve Easy Pressure Adjustment Cage protector: protects gauges from impact or mistreat(cage value 25.00) Specifications: Output Pressure Gauge: 0-160PSI ... moreTank Pressure Gauge: 0-140PSI Posted with
|
|
IMI Cornelius CB2323AK8 universal post-mix drop-in dispenser Pre-owned in great condition. Removed from a working environment. Local Pickup or LTL freight! FEATURES: Ice chest has 80 lb capacity. Foamed polyurethane insulation. Key lock switch conveniently located on tower( No Key! Large. Extended drip tray provides extra room for cup staging and is removable for ease in cleaning. 8 valves(8 valve has 2 ambient syrups and 6 chilled syrups) Front inlet fitting location. TECHNICAL SPECIFICATIONS: Type of valves UFB-1 TM post-mix Number of valves 8 Cup clearance 9.75" 248 mm) Counter top cut out 23.25" x 23.25" Ice storage capacity 75 lb(34 kg) Drain size. 0.75" 19.1 mm) flexible hose ConnectionS Water: 0.375" 9.5 mm) barb fitting Syrup: 0.375" 9.5 mm) barb fitting ... moreElectrical requirements. 120 V/ 60 Hz/ 1 Amp Shipping weight 235 lb(107 kg) Agency Listings Transformer is UL and cUL listed. Powered by The free listing tool. List your items fast and easy and manage your active items. c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13fa396cad5-0xf6-
|
|
|
For sale is a drink dispenser item code 44133R ZLA 099396C. I plugged it in and it gets very cold, no further testing has been done. some parts may be broken or missing, it may work fine but regardless it's being sold broken for parts. Some scratches and wear from being used. You will receive everything you see in the pictures. If it is not pictured then it's not included. Please view pictures and ask any questions you might have. Have a nice day!
|
|
Please Be Advised that the USPS Shipping costs have had an Increase as of Jan 27 2013 Please review all terms and see shipping details as part of this tranaction Our starting price or fixed prices including shipping are described in this listing and are part of the terms of our sales. You are bidding on a Vintage Sparklet Soda water canister Measures Apx. 4" diam 11" tall The marks are tape residue I do not know if this works or not AS IS See Pictures for closer details and conditions Please keep in mind that I am NOT an expert. Nor am I familiar with all the proper terms to be used in describing such items. However, I describe each item as best and honestly as possible, as well as provide photos for your review(remembering that sometimes a picture can make items look better or worse ... morethan they actually are) Ask any questions before you bid, unless otherwise stated, items are sold as is/as found. I do not attempt to clean items before selling them. And I leave this up to the new owner. If I make any gross misrepresentation of an item. I will be happy to work with you to find a solution that is satisfactory for both of us. If item is not paid for within 7 days of auction end, I reserve the right to re-list item. Shipping Information 54809 We do combine when possible to save you the buyer costs If you purchase more than one Item please do not pay until I have invoiced you with a combined shipping rate. Some items it may actually cost more to combine for example a heavy book with media mail cannot be combined with first class etc. If you have concerns about our shipping cost please contact us Our shipping costs are determined by WEIGHT. SIZE, and FRAGILITY Sometimes we have to ship a light weight item in a priority box for protection of the item. Although some items have to be shipped Parcel Post because of the nature weight and size of these items. The process can take up to 14 days for delivery of which we have no control once the USPS has possession of the item. Not considering Holiday periods) Here is
|
|
SODA SYSTEM 8 FLAVOR ICE& BEVERAGE SYSTEM PRICE $ 1, 7 98.00 + Shipping Manufactured by Eight(8) flavor soda fountain dispenser with built in ice bin(holds approx. 175lb. of ice) Bin has built-in cold plate. Very efficient cooling easily maintains product quality during high demand. Comes with a lid. An ice ring adaptor is available. We have set this system up to dispense eight(8) flavors. Equipped with lever activated ice dispenser. Product dispenses from push button electronic valves(different labels available) One of the valves can have a secondary lever for soda water or plain water only. Attractive marquee. Stainless steel construction. Measures 30" w x 30" d x 28" h. Very simple hook-up. The lines have been pre-assembled& labeled. ALL of the fittings have been ... moreprofessionally clamped for easy re-installation. ALSO INCLUDED: A Complete set of Co2 regulators(Primary and Secondary gauges) high pressure hosing. Carbonator, 8) syrup pumps with BIB hose. BIB connectors, and pump panel. We offer FREE phone installation support and a pdf manual with a start up video for easy installation. What you need to supply: Electricity. CO2, Syrup, Ice, Main Water Hook-Up. We will help you locate these items) As with all used equipment it has some dents. Dings& scratches through normal wear. This is a remanufactured unit in great operating condition. With ALL of our remanufactured equipment. We pressure test and performance test to meet the mfg standards. This is in good"used" condition and comes with our warranty. FEATURES Eight Flavor Soda Dispenser Completely Pre-Assembled Ready To Install Built-in Cold Plate/ Ice Bin Lever Activated Dispensing Valves(8) Syrup Pumps w/ Pump Panel Carbonator PDF Manual& Start Up Video Measures 30" W x 30" D x 28" H Complete Set Of CO 2 Gauges See Checkout For Shipping Rates 704-827-7400
|
|
|
Cornelius CO2 Gauges Soda Pop Beer Gas 500 Lb. I DO NOT know the working condition of these gauges!
|
|
|
This is a re-conditioned 5 Gallon Pin Lock. Soda Keg(Coke style) This keg has been cleaned and soaked in PBW re-rinsed, lubed and re-pressurized to check the seals. The kegs are in good shape, but could have small dings, dents or scratches. These will not effect the function of the kegs. Many have stickers on the outside. They might be of either Cornelius, Firestone(also called Spartenburg) or Italian construction. All types of kegs are manufactured to the same specifications and are of the same quality. This keg's lid will not have a pull tab pressure relief valve but, rather, will come with a"Depressor" that fits onto the post to relieve pressure. The lids and O-rings are interchangeable. FREE Pin Lock Keg Poppet Valve Depressor
|
|
|
Bought from my soda supplier as a back up for busy tavern and was delivered two weeks after we had a fire that wiped out my business. Not needed I only took the plastic off the gun to show its new and never used in the photo's.just cleaning house and things just need to go moved 5 states away not worth time and effort to return for customer credit I can not use.
|
|
|
Removed from service on 8/29/13. In great working condition. The restaurant that it was in is being closed down. This is a Wundar-Bar 10 button Soda Dispensing System. The handle is red with stainless steel hose. Model WBM-10620-R-FR-II. Serial 1409-891 and serial 1409-892. I have two. Comes with hose hanger and drain cup. And housing unit for Juice Manifold. Also includes ten 1/4" straight input fittings. Your getting a complete system. I also understand that Coke will install this for you for FREE. I have two of these so if you want both I will combine shipping. Or if your local. Feel free to pickup Thanks for looking! Posted with On Sep-09-13 at 16:16:50 PDT. Seller added the following information: This auction is for one complete working unit.
|
|
Original 1939 Coca cola countertop dispensing machine. This is not an"antiqued" reproduction. There is slight surface rust on the inside from storage. No holes in the metal or dents. There are scratches but nothing major. The white lettering does have a little fade from wear and age. The rubber gasket around the lid is dry rotted and cracked but still intact and seals correctly. This would be a cheap part to replace. I dont think that it should be restored but used as is. It was installed on a bar top and removed in 1993 and was in perfect working order. I searched Coca Colas private museum and they do not have this model in there showroom. It is a rare find and with a little cleaning would be a great addition to any bar or game room. Please watch for other dispensing units as we ... morehave about four more to list. If you need more photos or information please let me know. The owner says its got to go. Make an offer!
|
|
|
This is a skybox dispenser it worked great but suddenly stop getting cold.Easy fix just dont need anymore.Comes in two pieces has storage under. Front lights up or not and you can buy different pics for front. Pick up only.
|
|
This auction is for a New Cornelius Flavor Fusion system. This is brand new and is ready to go. This sells for over $13.000 new. At the time of this listing, we have 2 available. Dimensions: This will ship on two pallets. 48" x 40" Shipping is the responsibility of the buyer. Please read our shipping policy. This item will need to go freight. We will only accept wire transfers. Cash or check for this transaction. We will work with large corporations/government's on PO's. We also accept certified funds, as well. We accept company checks, but please allow up to 7 days to clear(until a relationship has been established) If you pay with paypal on this item, it will be immediately refunded. We charge from $125 to palletize this item. This is not the cost of shipping. All item ... moreare sold FOB. Our dock. We will assist you in arranging shipping. We will order the shipping and invoice you for the shipping. However, the shipping and any freighting is solely the responsibility of the buyer. We will assist in any claims, but they will also be the responsibility of the buyer. Shipping dimensions: Please Contact us All items are sold as-is. Where-is. Our warehouse is open daily for inspection. We do have a no DOA warranty and will send a service company to inspect the item. We mark many items with an invisible dna pen in several spots. Used equipment is insured differently through freight. Please order insurance for used commercial goods when shipping freight. If you book your own. We use UPS for all ground shipments. We will only use the USPS to international addresses or PO Boxes. You are welcome to use any freight company except SAIA for your freight shipments. But we have excellent discounts. We are a liquidation company based in Denver. CO. We have relationships with some of the largest companies in the world, including Wal-Mart, Office Depot, Albertson's, Pizza Hut, Sunflower Market, Hobart, JP Morgan Chase, Target and UPS. We have many other clients and would love to add your company. For inquiries,
|
|
|
Brass air fitting for shurflo BIB soda fountain syrup pumps. This is used to supply air or co2 to multiple pumps hooked up in series. Free shipping. Buy one or all. Posted with
|
|
|
UP FOR BIDDING IS A USED MCCANN E3000092 CARBONATOR HIGH VOLUME PUMP AND TANK UNIT WAE IN GOOD WORKING ORDER WHEN REMOVED SHOW SIGNS OF WEAR GOOD LUCK BIDDING
|
|
This auction is for(1) USED LANCER CORP Model 100 SK 315-002 FOUNTAIN DRINK DISPENSER VALVE. It was pulled from working equipment and it is in great looking and working condition. What you see in photo is what you get. If you are looking at it. You know what it is and how much they cost new. I also will be listing a lot of other items in the future. So check out my other auctions. If there is something particular you are looking for, email me and I might be able to accommodate you. PLEASE READ ALL DETAILS BEFORE BIDDING ASK QUESTIONS BEFORE BIDDING IF YOU BID ON THE AUCTION YOU ARE AGREEING TO OUR TERMS AND CONDITIONS. IF YOU DO NOT AGREE OR UNDERSTAND OUR TERMS AND CONDITIONS. PLEASE ASK QUESTIONS BEFORE BIDDING. AUCTION MUST BE PAID FOR WITHIN 48 HOURS. DO NOT TRY TO MAKE US PAY FOR SHIPPING ... moreAFTER YOU WIN THE AUCTION. IF YOU HAVE SPECIAL REQUESTS. CLARIFY THEM WITH US BEFORE YOU PLACE A BID. PLEASE CONTINUE READING THE REST OF THE CONDITIONS BELOW(ALL THE WAY TO THE END) BEFORE BIDDING. Check Out My Other Auctions. I have 100% Positive Feedback. Our goal is a smooth transaction for both of us. Item is offered for sale. As is, where is, and make no warranty, guaranty or representation of any kind. The item may have flaws and/or defects if this is a used item. By submitting a bid, the bidder agrees to pay for the item within 48 hours. If you win the auction and you’re not completely satisfied when you receive the item. Email us through eBay within 3 days of receiving the item and ask for a return authorization approval. You can return it for a refund(minus listing& shipping fees) Buyer pays all return shipping costs. You must notify us before returning items. If a problem is not brought to our attention by day three, the item cannot be returned. Returned items must be post marked within 14 days of the day you received the item. Calibration Issues, Software codes, Passwords, Licenses, BIOS Upgrades or any software issues are not covered by our DOA warranty as we are selling hardware only. Returned items mus
|
|
|
This is a no reserve auction for an electric water drinking cooler/fountain. To the best of my knowledge it still works. See pictures for cosmetic condition. It has a front fridge compartment area where your lunch/food can be stored. This door stays shut. But would need a lock/latch installed to keep it secured. Would be a good item for an office/business. Item is located in Richmond Hill. New York(Zip Code: 11418) This item is for pick-up only. No shipping. Posted with
|
|
This appears to be in great condition. It is a syrup pump and was working at the place we bought them from! We value each and every one of our customers and we strive to do everything we can to make sure you’re happy with your item. If you are not completely satisfied with your purchase. Please contact us immediately. We are a liquidation company. All items we sell are brought in on liquidation. We test everything we can. However we get a lot of items in that we don't know enough about to test them. We will describe the item to the best of our knowledge. If you have any questions we will be more than happy to help you out. We sell all types of store fixtures such as shelving. Coolers, pallet racking, and much more. If you have anything you need that is not listed, please contact Josh at(616)272-4909. ... moreFreight Quote: If you would like a freight quote please contact me with your zip code. If the address is a business or residential, and if you will need a lift gate. Thanks. Item Condition(New) All items marked as new will be new. However their boxes may show shelf wear and/or have dents, scratches, or dings. The items inside the boxes will be new. Item Condition(Used) All items marked as used may have any or all of the following: dents. Dings, scratches, bruises, knicks, or other defects. Our description will describe our used items to the best of our ability. If you have any further questions about an item, please ask us before buying an item. Please do not expect a new item to show up. When it is marked as used. Sale: We accept Paypal and all credit cards. Credit cards are taken over the phone. So if that is your preferred method of payment please contact Josh at(616)272-4909. All items must be paid for, in full, in two days or a case will be open automatically. Returns: All sales are SOLD AS IS with no warranties said or implied. NO RETURNS ARE ACCEPTED. The item will come exactly as described above. Please completely read description before buying. Thank you! By buying this item you agree to all of
|
|
|
USED EQUIPMENT PURCHASED FROM HOGGY'S RESTAURANT AUCTION IN GAHANA. OH(MAY 2013) IN USE WHEN PURCHASED 8 Head Soda Fountain w/ Ice Bin(Cornelius) ED250-BCH 6 Head Cornelius inset Fountain w/ Ice bin and Cold Plate 4 Flojet Syrup Pumps(Model G55102NM) w/ mounting rack 6 Flojet Syrup Pumps(Model N5000-520) w/ mounting rack 8 Shurflo Syrup Pumps(Model 166-296-07) Pressure Gauges Carbonator- Mod. 5K887D 2 Syrup Racks All the Hose you'll need(40 ft) 8 BIB(3 UNOPENED. OTHERS PARTIALLY USED- STILL GOOD FOR USE) Water Booster System(Shurflo) part#804-023 AO Smith AC Motor- Ser. 325P211 LONDON. OHIO IMPORTANT- LOCAL PICK-UP ONLY*NO SHIPPING
|
|
Up for your consideration is a used" CORNELIUS 8 HEAD BEVERAGE MACHINE W/ ICE DISPENSER" This machine was just removed from the failed restaurant and is ready for a new home. Everything seems to be in good shape. Light scratches here and there- but nothing major. I will guarantee this in this way; If you have any problems with this machine in the first 14 days of delivery to your location from mine. I will pay up to $200.00 in repairs to it. The buyer must provide a receipt from a verifiable company with the serial number of this machine being sold. More than happy to help out with a guarantee- just need to make sure all is fair. This was the machine that was being used when removed from the restaurant- but I can't test all the features at my location. So I want and need to work ... morewith you the buyer to make it fair to you and me. There are no returns or refund besides what is stated above. Give me a call at 505-860-1501 if you have any questions. The shipping is going to be expensive and I ask that you read all of the information below so that you know how all will play out for you in this process. This isn't easy on my side- but worth it to make sure the machine goes to a good home. I will deliver from Bellingham to the Seattle area for a $100.00 fee. The buyer must have the help to lift it off of my truck at the destination if I deliver it. The buyer may come up to Bellingham and pick it up at no extra charge. Thanks! WASHINGTON STATE SALES TAX WILL BE ADDED TO THE FINAL PRICE- IF THE ITEM IS BEING SHIPPED ANYWHERE IN WASHINGTON STATE! FEEDBACK" In addition to eBay feedback. We have started using an additional website for leaving feedback called ebuyer-feedback( www.ebuyer-feedback.com) We can leave a very nice. Full compliment of feedback, the same the buyer can on eBay. This is becoming very popular with eBay sellers and we have adopted it also. We will cancel a bid if we receive a"Bid Alert" from ebuyer-feedback. If you have left bad feedback for another eBay member without mak
|
|
WUNDER-BAR FLOW REGULATOR MANIFOLD- ALSO REFERRED TO AS THE MOUNTING BLOCK OR BACK-BLOCK USED FOR WUNDER-BAR 14 BUTTON BAR GUNS LIQUID FLOW REGULATORS: THE PURPOSE OF THE FLOW REGULATOR IS TO PROVIDE A MORE PRECISE BRIX RATIO BETWEEN SODA AND SYRUP DURING PRESSURE FLUCTUATIONS. THE REGULATORS COMPENSATE FOR PRESSURE VARIANCES BY AUTOMATICALLY REDUCING THE AMOUNT OF PRODUCT THAT PASSES THROUGH WHEN PRESSURE RISES. AND INCREASING AMOUNTS WHEN PRESSURE FALLS HOW IT WORKS: LIQUID FLOW REGULATORS MANUFACTURED FOR POST-MIX BEVERAGE DISPENSERS USE A"PISTON" MOVING UP OR DOWN WITHIN A"CYLINDER" TYPICALLY. A SMALL OPENING AT ONE END OF THE PISTON IS WHERE THE LIQUID ENTERS. LOCATED WITHIN THE HOLLOW PISTON IS AN ADJUSTABLE TENSION SPRING WHICH PROVIDES RESISTANCE AGAINST THE PATH ... moreOF LIQUID FLOW MANIFOLD IS USED BUT IN EXCELLENT CONDITION I WILL SHIP ITEM OUT SAME DAY IF PAYMENT IS RECEIVED BY 12PM. PACIFIC TIME I WILL SHIP TO THE UNITED STATES AND TO ELIGIBLE COUNTRIES IN THE EBAY GLOBAL SHIPPING PROGRAM. ALASKA. HAWAII& PUERTO RICO RESIDENTS MUST PAY FOR USPS PRIORITY MAIL SHIPPING EVEN IF THE LISTING STATES FREE SHIPPING FREE SHIPPING I ACCEPT PAYPAL ONLY IMMEDIATE PAYMENT REQUIRED IF YOU HAVE ANY QUESTIONS AT ALL PLEASE FEEL FREE TO ASK THANK YOU FOR LOOKING Posted with
|
|
|
This machine is like new! Only used for about 3 months.makes wonderful sweet and unsweet tea. Very easy to operate. Refill syrup bags by distributer. Tea tastes just like McDonalds sweet tea! a great machine! Can handle a very large dinner crowd of tea drinkers or days of moderate use.
|
|
|
Large MVE Stainless CO2 tank with all gages taken from a working restaurant in real good contition. Will deliver 50 miles from 28677. Would prefer local pick up but if you want shipped. You must make all arrangements. Payment expected within 3 days from auctions end or upon pick-up.About 58" high and 20" in diameter.Realize photos arent so great, will get some better shots, thank you for your interest
|
|
Click To Enlarge. Manufacturer: Wunder-Bar, Condition: Used, 9 Flavors Series 2.5. Price $75.00 Availability In Stock There are NO ADDITIONAL charges if you are picking the item up from our warehouse location and we are glad to help you load the item. Please bring rope or tie downs to fasten the item securely. See our other Items on our company website at mikesupply Dot com for the newest items that have just arrived. 714)648-0788 Warehouse Hours: Monday-Friday 9 Am to 5 Pm Our Warehouse is Located at 1638 E. Edinger Ave. Santa Ana. Ca 92705 The Above Shipping quotes are for THE LOWER 48 States Only. Hawaii and Alaska are EXTRA CHARGES and need to be quoted before you Purchase. We DO NOT ship to Canada. But will Package the item and send it on Your carrier. You will need to email us all the ... moreproper Paperwork prior to shipping.
|
|
Vintage Antique 2 Soda Fountain WHIP CREAM Dispencers Stainless Steel FOUNT WIP! Description PLEASE LOOK AT ALL OF THE PICTURES! DESCRIPTION: Greetings! Thanks for stopping in. Up for sale for your Consideration:Vintage Antique 2 Soda Fountain WHIP CREAM Dispencers Stainless Steel FOUNT WIP. You get both shown in photos for your bid. A great addition for a Soda Fountain Back Bar. Please remember to bid or make your offer early to insure you are the winner, and you will be glad you Did. PLEASE LOOK AT ALL OF THE PICTURES CONDITION: good for age but not perfect. One can has a dent in its side, and both lids are stuck tite, I was unable to open either one of them, so basically they are for display purposes as they are. SIZE: 6 3/8" tall x 3" dia.they will weigh approx. 4 lbs. when packed ... moreproperly. Terms of Sale The items I list are found at Estate sales.Garage sales, Auctions. They are not brand new unless stated as such.They are antique,vintage, or preowned items. Even if they were never used. They are not new and may show varying signs of age,wear, yellowing or SMELLS. I would not know if items purchased are from PET free, or SMOKE free homes. I describe items to the best of my knowledge and put numerous photos for you to look at. All Items are sold AS-IS and that doesn't necessarily mean damage just that they were previously owned and handled. Unless I State that I have personally drycleaned or laundered the item, it is suggested and would be the responsibility of winner to have them cleaned& laundered. If you receive a item and find a problem email me right away, and I will do my best to resolve the problem. We do have a 14 day return policy no questions asked. About Us We are a mom& pop shop. Just me& my wife. We love to sell are Chicago finds here on EBAY. We are dedicated to bringing a good reliable service to buyers. Template designs and graphics provided by Original Template Designs
|
|
|
McBulk Hybrid Stainless Syrup Tank Restaurant Commerical SSM-80G This tank was removed from the storage area of an operational restaurant. The tank has no dents and all welds are solid. All access ports are tight. Rubber caps are in good shape. Tight legs. I have no way of testing this as the needed equipment is unavailable to me. That said this is sold as is. Height 65in Dia 22in 75 gal Approx 125 lbs This is for the tank only. No other parts are included. Payment via paypal. Pick up only. I may be willing to ship freight but it will be expensive. If you are interested please send me an email before bidding and I will send pricing for shipping. That way no sticker shock. I am willing to deliver the tank to anyone who is within 30miles of zip 20783. Thanks.
|
|
|
Vintage 1970s pressure. Temperature, test kit with instructions and all of the parts and a carry case. Appears to never have been used. There is some corrosion on the carry case near the latch(see pics) Please feel free to ask questions! RARE!
|
|
|
This vintage 1960.S drink dispenser has 1 side that still works, the other needs some minor repair I was told. From a pizzeria. Can use a good cleaning. Posted with
|
|
This system hasn't been used in quite a few years. This would be an ideal system for a home bar. Man cave, media room or small concession. This is pretty much a complete system for a post-mix bag in box system. It includes a two faucet tower with drip tray, high and low Co2 pressure regulators, two sureflo syrup pumps with a plastic wall mounting bracket for the pumps, carbonator, bag in box connectors, cold plate and misc. fittings. I am also throwing in a Wunderbar bar gun in case the buyer would rather use it than the tower. All of the beverage lines have dried syrup in them and will have to be replaced. The Wunderbar will have to also be disassembled and cleaned per their instructions on their website. The carbonator pump came on when I plugged it in and it shot water out of the discharge. ... moreI don't know how to test the tower valves, their are some wires coming out the back but I don't know the voltage to activate the valves or anything about the tower actually. For a completed system,it would need a Co2 bottle and fittings, new beverage hose and new Co2 hose. I'd put a water filter on the incoming water if I was hooking it up. The bag in box fittings are for Pepsi products. If the buyer lets me know at time of purchase, I have some Coke product bag in the box fittings I can swap out. I did not test the Sureflo pumps so I don't know their condition. This would be a good system for someone who knows or has the ability to research and install a system like this on their own. I have done my best to describe the system but since it hasn't been used in awhile I am selling this system"as is" with no warranty or returns. If you want a complete system working out of the box there are several reputable sellers on ebay who will sell you a similar system for 2x, 3x or 4 times the money. If you want to save some money and tinker with it yourself, this would be a good start on a neat little system.
|
|
|
Lot of 12 coke adapters with 4 ft hoses cleaned and sanitized Posted with
|
|
|
Used but all have been sanitized ready to install Posted with
|
|
|
Shipping in us only. Excludes alaska and hawaii. 100% satisfaction guarantee. If not satisfied buyer can return for full refund. Buyer is responsible for return shipping cost. Good luck bidding.
|
|
|
This is off a working fountain machine! It is in good condition. It is what combines the water and soda syrup together.
|
|
Hello and thanks for looking! You are bidding on a used but in good condition Haws floor standing model HF8H water cooler drinking fountain. PLEASE NOTE: This auction is for the working cold side of the fountain- not the hot side as we powered up and the compressor came on but the hot side did not heat up and could be a simple fix or? This will be sold"As is- no returns" If you would like specific pictures email us and let us know. It will take an extra day or so at auction end before it will ship so we can get it properly packed for safe transprotaion to your location. You may want to consider extra insurance as we will pack well but we have not control after leaving our hands. Local pick up is available or we can get the fountain to the dock if you have a shipping service you prefer ... moreto use. As Estate buyers we make every attempt to accurately describe our items as we inspect them but at times we may miss something specific to an item that we are unaware of. If this unfortunate situation arises. Please give us a chance to make things right with you before posting us negative feedback. We work towards total satisfaction and if we missed something let us work it out with you. Please read the whole listing before bidding and email us with any questions so there is no confusion as to what you are bidding on and the terms of this item. Do check out our other auctions. Please note we usually offer multiple shipping options to get your item to you and we charge actual shipping plus a small fee for supplies. If the shipping looks out of proportion let us know and we will look into it and correct any error. We now ship internationally using the eBay international shipping program if the item qualifies for the program. PLEASE NOTE: If the USPS shipping option is chosen please consider insurance as we will not be responsible for an item once it leaves our hands and we are experiencing increasing lost packages from them. Thanks Again and Happy Bidding! We track all our auctions during our physical store hours- 10a
|
|
|
This auction is for one Flojet beverage pump Model 5000-140. Great for coke machines.
|
|
|
A 76 page instruction book for a Bastian-Blessing Company#5 soda fountain used aboard US Navy ships during and after WW2. In excellent condition. Many photos, parts pages, maintenance, etc. Not many of these around anymore. Payment by PAYPAL only and shipping within the USA only. Thanks.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-1431257542f-0xf9-
|
|
|
Here is a used 6 circuit coldplate for the bar guns. It is 15x10. Great shape.
|
|
|
For sale is this red wunder bar dispensing gun. It has been flushed with superflush And water. All the ports have been tested for leakage And all function correctly. It is a nine button gun. I have not changed any of the flow regulation so that will come as it was. Please feel free to ask any questions. The model number and serial number is pictured. The set up comes with mounting hardware as well as a brand-new hose hanger kit And stainless steel quarter inch fittings. Posted with
|
|
|
STAINLESS STEEL SOFT DRINK DISPENSER COUNTER. Counter Comes with Drain for Drink Spillage& Shelving Underneath for Storage of Beverage Syrup Boxes! Counter Pick-Up ONLY in Birmingham. AL; contact seller with any questions. Item sold as is. Where is. No warranty implied or otherwise.
|
|
|
I have a Nice Procom Carbonator Pump and 1/3 Hp Motor Close coupled unit that came off a working Soda fountain that was messed up in a fire. The carbonator was down in the cabinet and was undamaged but the Dipensor on top was partly melted from the heat. So we tore it apart for the Good parts. These PUMPS aare $89.00 New and the Motors are $149.00 New. I am asking a Fair and Reasonable Price, Not over Priced. ALL REASONABLE OFFERS will be Reviewed. TESTED THE MOTOR AND PUMP and motor Runs and Pump Pumps water like a bandit. Ships to LOWER 48 STATES ONLY Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-1431546bb24-0x109-
|
|
|
used taken out from Burger king Cranbrook BC Location while working. Can buy 1 for $26 or all 14 for $200. It is located at Burger King Cranbrook BC. V1C 3R5. Buyer will pay all shipping charges. And shipping is from Cranbrook Burger King BC Zip: V1C3R5 Shipping I have it there $ 25, but if shipping is lower then or more then that would buyer will pay. real shipping cost.
|
|
|
I have one Siemens Breakmate. Coke Beverage Dispensers up for sale/auction. Used but in GOOD Condition. This is just the machine it doesn't come with any coke soda or CO2 container. Buying dispenser unit. Comes with three brand new drink Outlets. Comes with all the original paperwork from Siemens. I believe this dispenser was never used but I am not certain. Buyer pays shipping. Thank you for your time and good bidding.
|
|
AUTOMATIC BAR CONTROLS. INC WUNDER-BAR FLOW REGULATOR MANIFOLD- ALSO REFERRED TO AS THE MOUNTING BLOCK OR BACK-BLOCK USED BUT IN EXCELLENT CONDITION. READY TO BE HOOKED UP UPON RECEIPT FOR 10 BUTTON WUNDER-BAR POST-MIX BAR-GUNS(SODA& JUICE) MANIFOLD HAS BEEN TESTED. CLEANED AND SANITIZED LIQUID FLOW REGULATORS: THE PURPOSE OF THE FLOW REGULATOR IS TO PROVIDE A MORE PRECISE BRIX RATIO BETWEEN SODA AND SYRUP DURING PRESSURE FLUCTUATIONS. THE REGULATORS COMPENSATE FOR PRESSURE VARIANCES BY AUTOMATICALLY REDUCING THE AMOUNT OF PRODUCT THAT PASSES THROUGH WHEN PRESSURE RISES. AND INCREASING AMOUNTS WHEN PRESSURE FALLS HOW IT WORKS: LIQUID FLOW REGULATORS MANUFACTURED FOR POST-MIX BEVERAGE DISPENSERS USE A"PISTON" MOVING UP OR DOWN WITHIN A"CYLINDER" TYPICALLY. A SMALL OPENING ... moreAT ONE END OF THE PISTON IS WHERE THE LIQUID ENTERS. LOCATED WITHIN THE HOLLOW PISTON IS AN ADJUSTABLE TENSION SPRING WHICH PROVIDES RESISTANCE AGAINST THE PATH OF LIQUID FLOW VERY MINIMAL ADJUSTMENTS(IF ANY) SHOULD BE NEEDED I WILL SHIP ITEM OUT SAME DAY IF PAYMENT IS RECEIVED BY 12PM. PACIFIC TIME I WILL SHIP TO THE UNITED STATES AND TO ELIGIBLE COUNTRIES IN THE EBAY GLOBAL SHIPPING PROGRAM. ALASKA. HAWAII& PUERTO RICO RESIDENTS MUST PAY FOR USPS PRIORITY MAIL SHIPPING EVEN IF THE LISTING STATES FREE SHIPPING I ACCEPT PAYPAL ONLY IMMEDIATE PAYMENT REQUIRED IF YOU HAVE ANY QUESTIONS AT ALL PLEASE FEEL FREE TO ASK THANK YOU FOR LOOKING Check out my! Be sure to add me to your! Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
|
|
CORNELIUS ED200-BCZ 8 HEAD FOUNTAIN MACHINE GOOD WORKING ORDER This unit was removed from a working environment and is believed to be in good working condition. The faceplate plastic is somewhat weathered and has a crack/break on the right hand side and the cover could be better. But it is fully servicable as is and is very nice other than these two items. What you see in the pictures is exactly what you get; no additional items are included with this machine. I prefer local pickup for this item. But will help you with freight shipping; I will put it on a pallet, wrap bubble wrap on it and strap it down, but you will need to arrange shipping other than that. I can also deliver for 1.00 per mile from Shawnee, OK 74801. Buy several items at the same time and the freight gets better on each item. ... moreI have lots of equipment available.
|
|
|
FOUND IN ESTATE SALE ~~~~~~~ LOT OF SYRUP DISPENSER LADELS IN USED CONDITION. 3 ARE ROGERS AND OTHERS, VISIT MY STORE AS I'M A AUCTION BUYER AND I HAVE A VARIETY OF ITEMS.
|
|
|
We are selling a 12 head. Double ice shoot coke machine. The unit is in perfect working order. It was relieved due to franchise requirements for the new coke free style machine. This unit comes with an ice machine, but rack for the 12 head system and a carbonator. The unit can be shipped freight on r and l or picked up. We can do an estimate from r and l with your exact zip code as well. My guess is 350$ to ship. This machine can be easily plumbed by coca Cola and should be a cost savings. The ice machine alone is 800$. This unit can be used for high volume self serve or for back of house serve.
|
|
|
Halsey Taylor King seeley wall mount drinking fountain. Model 9-04540-5-00-1. It is used and could use a good cleaning. But is in very good condition. Not sure how old it is and the rubber seals may or may not need changed. The handle turns freely and the stainless is in good condition with no big dents. SEE PHOTOS) No reserve good luck and happy bidding!
|
|
|
For sale is a used kegerator conversion kit. My brother used to have this mounted on his old refrigerator. I have no idea if it still works and it hasn't been used in years but there doesn't seem to be much that could break. Hoses probably should be replaced but otherwise appears fairly clean. I don't know what style keg it fits because I don't know anything about them. I think it fits regular kegs but please look closely at the pics.I do not have a tap handle but any size will fit it. Thanks for looking. Posted with
|
|
|
Elkay Stainless Steel Water Fountain w/Flexi-Guard. Removed during demolition and renovation of a commercial space. Needs some cleaning. TLC, new water supply and drain lines. One of the mounting flanges needs to be bent back in alignment with the others before mounting. Otherwise serviceable or your money refunded in accordance with return policy. We will box and deliver to UPS for shipping. You make payment arrangements directly with UPS. Item listed locally. So we reserve the right to terminate the auction at any time.
|
|
USED- LIKE NEW STEEL 20 LB CARBON DIOXIDE(CO2) TANK. NEWLY HYDROTESTED- NEEDS RE-TESTING IN 5 YEARS. DOT 3AA 1800 SPECIFICATION. DOT3AA's ARE STRONGER THAN DOT3A& ICC3A. MADE BY NORRIS CYL. ONE OF LARGEST MFRS IN THE WORLD. TANK IS IN EXCELLENT CONDITION WITH USED CGA 320 VALVE. APPROX 8" WIDE. 26" TALL OVERALL. EMPTY WEIGHT APPROX 36 LBS. TANK IS SHIPPED EMPTY- WILLL HOLD 20 LBS CO2. IDEAL FOR: DRAFT BEER DISPENSING. CARBONATING SOFT DRINKS& WINE. MIG WELDING. RECHARGING PAINTBALL CARTRIDGES. GREENHOUSE PLANT STIMULATION. FOOD PRESERVATION. EMERGENCY DRY ICE(110 DEGREE SNOW) INFLATING RAFTS. TIRES, BALLOONS, ETC. OPERATING AIR TOOLS. I HAVE OVER 40 YRS EXPERIENCE WITH CO2 AND. OTHER COMPRESSED GASES AND HIGH PRESSURE. CYLINDERS AND WILL BE HAPPY TO ANSWER ANY. QUESTIONS ... moreYOU MAY HAVE. IF I CAN. 30 DAYS NO-QUESTIONS-ASKED MONEY BACK GUARANTEE. PLEASE CHECK MY OTHER LISTINGS. THANX FOR LOOKING.
|
|
|
Tap-rite double co2 guage with braided manifold line. Fully adjustable please ask any question before buying item.
|
|
HAWS GREEN WATER COOLER DRINKING FOUNTAIN- WALL HUNG GREEN. IN NICE SHAPE. COMES AS SEEN IN PICTURES, I TRY TO DESCRIBE ALL OF OUR ITEMS AS ACURATELY AS POSSIBLE. ALL OUR ITEM ARE SOLD AS USED UNLESS STATED OTHERWISE.EVERYONES OPINION OF CONDITION IS DIFFERENT SO PLEASE TAKE A LOOK AT THE PICTURES AND DECIDE FOR YOURSELF. BEFORE YOU OPEN A EBAY CASE. PLEASE EMAIL, LET WORK IT OUT, ITS QUICKER AND BETTER. I DO NOT APPRECIATE NEGATIVE FEEDBACK ALL HAS A SOLUTION! WE CAN ALWAYS WORK SOMETHING OUT. I ACCEPT PAYPAL- PAYPAL CONFIRMED ADDRESS PREFERRED- I SHIP EVERY MONDAY. WEDNEDAY AND FRIDAY OF THE WEEK,SO PLEASE BE PATIENT YOUR ITEM WILL BE SHIPPED AS SOON AS POSSIBLE- SORRY NO INTERNATIONAL TRANSACTIONS ALSO NO SHIPPING LARGE ITEM TO P.O. BOXES, ALASKA,HAWAII APO or FPO.WILL ONLY SHIP TO THE ... moreLOWER 48 STATES.
|
|
|
Solid brass Y fitting with 1/4 NPT male input& dual 1/4" compression outputs with built in backflow check valves. This is designed to run multiple CO2 lines from a single regulator. It could also be used for other compressed gas applications. Posted with
|
|
|
Used Cornelius Enduro 200(ED200) 8 head soda fountain with ice dispenser. Overall the machine is very clean and in very good condition. Included is a BIB rack that holds the 8 bag-in-box syrup bags. 8 flojet pumps, primary and secondary CO2 regulators, and carbonator pump with water pressure regulator. All lines still have the BIB connectors on them. You just need to run new lines from the pumps to the fountain, connect water and co2, and start pouring fountain drinks. Spare light bulb and starter ballast included as well. Local pick-up only or I can deliver/assist with delivery within a reasonable distance of the Kansas City area for an agreed upon fee depending on location. Please contact me prior to purchase to make arrangements.
|
|
|
Excellent condition Gently used and professionally taken out These days everyone wants a full bottle of water. So give them what they want Cool Retro look especially with the blue part which is pressed to dispense Call a plumber to have this installed anywhere. Home, office, even outside Please view all pictures and ask any questions Missing 1 threaded rod behind pipe although doesn't affect form or function This will be partially disassembled for shipping unless you prefer otherwise
|
|
This is a vintage soda fountain. Made by Stanley Knight. The two draft arms provide fine and coarse streams(water and carbonated water) and the pump action dispensers serve various syrups. The main compartment is refrigerated and holds your toppings. There's also a small dip well for rinsing utensils. Note: This unit is not operational. The refrigeration system(an aftermarket system by Americold) will need to be looked at by a technician. And. It will need a carbonator and regulator for the coarse draft arm. Send me a message if you have any questions. If you're in the Phoenix area and would like to see the unit in person. I'd be glad to show it to you. Thanks and happy bidding! William*My apologies to those who were previously watching this item. There was in issue over the max ... moreamount new sellers(such as myself) are allowed to list per month. We got it straightened out. But I'm having to relist everything from scratch.
|
|
|
Used Jet Spray Drink Dispenser. I plug it in and coil gets cold. Missing Drip Tray. Easily Found Parts available) Will need Good Cleaning. May Need tank Seals. Everything that's included in pictures, if other parts are missing Buyer will have to Purchase Separately. These unit last for ever, and parts are available. Sells AS IS NO REFUNDS Ships Only To Lower 48 I am not Expert on Any of The Items Offered By ME at Auction. By Bidding. You, The Buyer, Acknowledge That You Are Bidding on an Item That You Are Confident. If You Are Unsure About An Item, Kindly Reframe. Sold As Is. Please review the pictures as this is the best description I can give. All items are sold as is with. NO returns.
|
|
Lot of 2 Shurflo beverage pumps 166-296-07 Item came here to us at the pawn shop. We do not have personal use of it. Set is untested- for parts or repair only- no returns Picture is actual item you will receive. Please see pictures for best item description. Comes with everything shown in pictures. PLEASE NOTE: This is a used item and is being sold as found. As is- What you see in the pictures is what you will be receiving. Please read the item description and look at the photos carefully before bidding We will describe the item to the best of our ability. PLEASE ASK QUESTIONS PRIOR TO BIDDING. WE WILL BE MORE THAN HAPPY TO ANSWER QUESTIONS THE BEST WE CAN. Buyer assumes responsibility for all shipping and processing charges. THIS AUCTION IS FOR 1(one) item unless otherwise specified. Delaware ... moreGold& Pawn reserves the right to end any auction at anytime! All of our items will typically ship within 1-2 Business days After payment is confirmed. WE ONLY ACCEPT PAYMENT THROUGH PAYPAL AND ONLY SHIP TO U.S. ADDRESSES Except Hawaii. Alaska and Puerto Rico. We use only UPS Ground Service and are not able to ship to P.O Boxes and APO's. Be sure to check out our other items and save us as a favorite seller! Keep an eye on our auctions. You never know what we might have! We are a Pawn Shop and buy most of items from our walk-in customers. We Strive for nothing less than 5 Star FeedBack and 100% satisfied buyers! If for any reason you are not completely satisfied with your purchase before leaving feedback Please contact us with any questions or concearns at 302-384-6734 ask for Chris In Internet dept. We appreciate you looking at our items. Good luck and Happy Bidding.
|
|
|
Up for bid is an older heavy metal Solo standard size paper cup dispenser. This would attach to the side of a water cooler or a beverage dispenser. Possibly in a school or commercial facility. It measures 16 1/2" by 3" wide and has a removable chrome cap for re-filling. There is also sight glass on the front to check the contents, a flange on the back for mounting, and a blue metal riveted"SOLO" tag on the front. Excellent condition, no damage, a few scratches from wear. Winning bidder will pay $8.00 shipping. NO RESERVE! RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-1434858beb8-0x102-
|
|
|
THe machine works well"The SV-200/250 This is a coke pepsi fountain soda dispenser machine with room for you to add an ice. Machine to top of it. ANY Questions 502-517-6312. A1 Restaurant Equipment Surplus. HERE ARE DETAILS ON THE MANUFUCTURER WEB BELOW. With exclusive icepic® technology. Offers the industry’s only crushed or cube ice option within one beverage dispensing unit. With the push of a button, the all-in-one technology delivers cube or crushed ice. When“crushed ice” is selected, the cube is crushed inside the machine prior to dispensing. The SV-200/250 delivers savings on equipment purchases. And installation and maintenance costs. from manitowocbeverage.com/us/news/pressrelease/2007_05_16_servend_introduces_new_icepic_feature.
|
|
|
9 FLOJET BEVERAGE PUMPS. BRACKETS, CORNELIUS REGULAGOR, 120+ FT NEW HOSE, SHUT OFF VALVE, FITTINGS 9 Flojet CO2 or Compressed Air Beverage Pumps(5000 Series) In Great Shape and Fully Functional Model# P5000551. 4) N5000-140, N5000-502, T5000-515, N5000-515, N5000-504 All Pumps Are Securely Mounted To Brackets Cornelius Regulator(100PSI) Max New 20ft. Bundle of 4 Lines(3/8" Diameter) New 80ft. of 3/8" Diameter Line 3/4" Mueller Shut Off/ Control Valve With 1/4" Hose Fittings(4) Stainless Steel1/4" Tees Fitting(1) Stainless Steel 1/4" 4 Way Fitting(1) Stainless Steel 1/4" to 3/8" Splicer Fitting(1) Stainless Steel 1/4" Splicer Fitting
|
|
|
Untested In good condition Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-1434858bcd7-0xf9-
|
|
|
Good used nitrogen regulator. I bought a box of assorted regulators at a auction. This is the last one i have. Tested and works perfect. Get yours now way cheaper then the price of a new one. Payment to be made via paypal within 48 hours of auctions end. Posted with eBay Mobile
|
|
AUTOMATIC BAR CONTROLS. INC WUNDER-BAR REBUILT 10 BUTTON BAR-GUN. SCHWEPPES GINGER ALE LOGO MODEL WBM-10620 30" STAINLESS STEEL HOSE BAR-GUN HAS BEEN COMPLETELY RE-BUILT RE-BUILT 10 BUTTON BAR-GUN CONSISTS OF: PRESSURE FLUSHING THE BAR-GUN AND COMPLETE INTERNAL& EXTERNAL CLEANING OF THE BAR-GUN:COMPLETE BAR-GUN DIS-ASSEMBLY AND REMOVAL OF ALL INTERNAL PARTS:INSTALLING ALL NEW INTERNAL PARTS. WHICH INCLUDES: ALL NEW SPRINGS, SPRING HATS, HAT O-RINGS, STAINLESS STEEL VALVE STEMS& STEM O-RINGS:INSTALLING A NEW BOTTOM PLATE:INSTALLING A NEW SPLIT HEEL:INSTALLING A NEW(PUSH-ON STYLE) NOZZLE AND 2 NEW NOZZLE O-RINGS:INSTALLING A NEW JUICE DIFFUSER RING:INSTALLING A NEW BUTTON PACK WITH ALL NEW SELECTION BUTTONS AFTER RE-BUILD: THE BAR-GUN IS INSTALLED ON A LIVE(PRESSURIZED) SYSTEM AND ... moreCHECKED FOR SYRUP/WATER LEAKS. PRESSURE TEST AND OVERALL BAR-GUN INSPECTION COMPLETELY CLEANED- FLUSHED& SANITIZED THIS 10 BUTTON BAR-GUN IS IN EXCELLENT CONDITION AND READY FOR IMMEDIATE USE AS SOON AS YOU RECEIVE IT THIS BAR-GUN HAS 6 CARBONATED SELECTIONS. 2 NON CARBONATED SELECTIONS, 1 PLAIN WATER SELECTION& 1 SODA WATER SELECTION. THESE SELECTIONS CAN BE CHANGED TO MEET OWNERS NEEDS BY SIMPLY INSTALLING THE CORRESPONDING BUTTERFLY PLATE OR PLATES. IF UNSURE WHAT THIS MEANS JUST ASK AND I WILL GLADLY EXPLAIN IT. I WILL GLADLY MAKE ANY CHANGES NECESSARY TO THE BAR-GUN UPON BUYERS REQUEST RE-BUILT 10 BUTTON BAR-GUN COMES WITH: NEW UNOPENED BAR-GUN MOUNTING KIT(KIT OPENED FOR PICTURE CLARITY) YOU WILL RECEIVE AN UNOPENED KIT-NEW SYRUP/ WATER INLET FITTINGS WITH O-RINGS(10 TOTAL) YOU WILL RECEIVE EXACTLY WHAT IS PICTURED(MOUNTING KIT WILL BE UNOPENED) I WILL SHIP ITEM OUT SAME DAY IF PAYMENT IS RECEIVED BY 12PM. PACIFIC TIME I WILL SHIP TO THE UNITED STATES(ALASKA. HAWAII& PUERTO RICO INCLUDED) AND TO ELIGIBLE COUNTRIES IN THE EBAY GLOBAL SHIPPING PROGRAM FREE SHIPPING I ACCEPT PAYPAL ONLY IMMEDIATE PAYMENT REQUIRED IF YOU HAVE ANY QUESTIONS AT ALL PLEASE FEEL FREE TO ASK THANK YOU FOR LOOKING Check out my! Be sur
|
|
Soda Fountain SAUCE LADLE c1920 Shell Pattern Liquid Carbonic Company EPNS in 1903 The Liquid Carbonic Company of Chicago. Illinois. Began making and distributing soda fountain equipment and supplies marked with a trademark logo of a horizontal diamond enclosing capital letters spelling: LIQUID this is a silverplated nickel silver ladle with that logo on the back side of the handle relief shell on handle tip and overall shape imitate the 18 th century English forms fashionable in the U.S. c 1920 perhaps 5% of original silverplating remains much used with many. Many surface scratches, but no dents longest– 10” bowl- 2½” diameter x 1” deep ladle holds 1.25 liquid oz- questions? e-mail buyer pays shipping and handling fee(if any) we ship via USPS(unless requested otherwise) only actual postage ... moreand fees charged in some ads the ship fees are guesstimated in some cases guesstimate given until packed for shipment and winner notified due to size or location First Class for most items up to 13 oz. otherwise Priority or Parcel Post insurance is included in domestic shipments International First Class and Flat-Rate-Envelope cannot be insured payment must be received within 5 days· all have been previously owned and were found in charity resale shops– all have been stored in drawers. Shelves, boxes, in closets, attics, basements and storage facilities– glass. Pottery, china and metals are washed- some metals are also polished by us– many are not– damages i.e. chips. Cracks, condition, etc are listed in ad as well best to our knowledge– no“restorations” textiles. Drapes, ties, scarves, etc are untouched by us– not washed or cleaned– some odors may prevail- spots. Holes and condition of textile items are listed in ad as well to the best of our knowledge– no repairs- please e-mail with any questions(no refunds- no returns- no exchanges– no excuses) please check out our other auction& store listings thanks!
|
|
Soda Fountain SAUCE LADLE c1930 Deco Streamlined Liquid Carbonic Company EPNS in 1903 The Liquid Carbonic Company of Chicago. Illinois. Began making and distributing soda fountain equipment and supplies marked with a trademark logo of a horizontal diamond enclosing capital letters spelling: LIQUID this is a silverplated nickel silver ladle with that logo on the back side of the handle streamlined Art Deco pattern with handle factory bent at a 90º angle to rest on the edge of a c1930 hot fudge reservoir almost 85% of original silverplate remains with losses to interior and exterior of bowl many tiny scratches no dents height bottom of bowl to bend- 5½” top length of handle– 3” bowl 2½” diameter x 1⅛” deep ladle hold 1.5 oz liquid- questions? e-mail buyer pays shipping and handling ... morefee(if any) we ship via USPS(unless requested otherwise) only actual postage and fees charged in some ads the ship fees are guesstimated in some cases guesstimate given until packed for shipment and winner notified due to size or location First Class for most items up to 13 oz. otherwise Priority or Parcel Post insurance is included in domestic shipments International First Class and Flat-Rate-Envelope cannot be insured payment must be received within 5 days· all have been previously owned and were found in charity resale shops– all have been stored in drawers. Shelves, boxes, in closets, attics, basements and storage facilities– glass. Pottery, china and metals are washed- some metals are also polished by us– many are not– damages i.e. chips. Cracks, condition, etc are listed in ad as well best to our knowledge– no“restorations” textiles. Drapes, ties, scarves, etc are untouched by us– not washed or cleaned– some odors may prevail- spots. Holes and condition of textile items are listed in ad as well to the best of our knowledge– no repairs- please e-mail with any questions(no refunds- no returns- no exchanges– no excuses) please check out our other auction& store listings thanks!
|
|
WUNDERBAR 8 BUTTON DRINK DISPENSING SYSTEM* This auction is for a Wunderbar 8 Button Drink Dispensing System. Model WBM-842-II, in very good condition with the exception that two of the soda buttons might need replacing, when I push down on them they do not return to thier starting point. Has manifold& 29" flexhose For any further information that I might be able to help you with or additional pictures of this item please feel free to contact me INTERNATIONAL BIDDERS PLEASE contact me for a shipping quote before you bid International shipments via USPS Express Mail International. UPS or FedEx IF I MAKE AN ERROR I WILL CORRECT IT. IF YOU HAVE BUYERS REMORSE. DID NOT READ THE DESCRIPTION, DID NOT UNDERSTAND WHAT YOU WERE PURCHASING, USED FOR YOUR SPECIAL OCCASION THEN WANT TO RETURN ... moreOR FAILED TO USE OR OPERATE THE ITEM PROPERLY I WILL NOT ACCEPT RETURNS
|
|
|
is in perfect condition. Works excellent. has additional accessory for pulpyproducts.
|
|
ITEM DESCRIPTION Up for auction is a Hall Stanley Knight porcelain syrup dispenser. Made in the USA. The black porcelain stands 6.5 inches tall, 7.25x5.5 at top and 6x4 at middle right back corner has what appears to be a glued repair, but it seems secure and done very well. Chrome top piece is nice I have three hard plastic ones for strawberry. Cherry and vanilla syrup. Check those out as well. Do your own research and bid accordingly. Ask questions. Check out other items and enjoy combined shipping. OTHER GENERAL INFORMATION Bid with confidence. Check out my other listings for more great stuff. I’m happy to combine shipping costs for multiple purchases. International buyers are welcome. But please check on shipping costs before bidding. Also, shipping in the states may vary by ZIP code, ... moreso check that as well. Payment is expected within five days of the auction’s end. Posted with eBay Mobile
|
|
ITEM DESCRIPTION Up for auction is a black hard plastic vanilla syrup dispenser with chrome top. Black part is 9.5 inches tall. 7.5x4.4 at squared top and 6.25x3.5 at rounded middle. I believe the black part is supposed to fit into a larger serving station. It stands alone but would need to be put inside something more secure if being used as a dispenser. Pump seems to work fine. Bottom says B&B Co. of Chicago. I have two more of these- for strawberry and cherry- and a smaller but more secure porcelain one with no particular flavor. Check those out as well. Do your own research and bid accordingly. Ask questions. Check out other items and enjoy combined shipping. OTHER GENERAL INFORMATION Bid with confidence. Check out my other listings for more great stuff. I’m happy to combine shipping ... morecosts for multiple purchases. International buyers are welcome. But please check on shipping costs before bidding. Also, shipping in the states may vary by ZIP code, so check that as well. Payment is expected within five days of the auction’s end. Posted with eBay Mobile
|
|
UP FOR YOR CONSIDERATION IS A GROUP OF 3 STAINLESS STEEL. WITH HARD PLASTIC INSERTS, KENCO, VINTAGE ICE CREAM SODA SHOP DISPENSERS. COMPLETE WITH STAINLESS CARRIER. I AM LISTING 2 GROUPS TO SEE IF THERE IS ANY INTEREST, I HAVE MANY MORE WHITE PORCELIN GROUPS ALSO TO SELL. THESE CAN BE PICKED UP IF DESIRED, OR PAY THE SHIPPING COST. DIMENSIONS ARE AS FOLLLOWS. 16" LONG X 11 1/2" DEEP X 12" HIGH. REALLY CLEAN FOR AGE, I SHOW SOME CRACKS REPAIR IN PICTURES 6 AND 7. PLEASE ASK ALL QUESTIONS BEFORE BIDDING SO YOU HAVE ALL YOUR DOUBTS ANSWERED. BE SURE, PLEASE. IF YOU NEED ANY SPECIFICS, PLEASE ASK AND I WILL ANSWER AS BEST I CAN. I EXPECT PAYMENT ASAP, IF POSSIBLE, OR UP TO 5 DAYS AFTER AUCTION END. I SHIP PRIORITY OR PARSEL POST WHICHEVER IS LESS FOR BUYER.PLEASE WAIT FOR INVOICE ... moreBEFORE PAYING, THANK YOU. IF I FAIL TO DESCRIBE MY ITEM ACCURATELY AND ITEM MUST BE RETURNED, IT WILL BE RETURNED AT BUYERS EXPENSE.
|
|
UP FOR YOR CONSIDERATION IS A GROUP OF 4. BLACK PORCELIN AND STAINLESS STEEL, VINTAGE ICE CREAM SODA SHOP DISPENSERS. I AM LISTING 2 GROUPS TO SEE IF THERE IS ANY INTEREST, I HAVE MANY MORE WHITE PORCELIN GROUPS ALSO TO SELL. THESE CAN BE PICKED UP IF DESIRED, OR PAY THE SHIPPING COST. I WILL HAVE TO PACK IN 2 SEPARATE BOXES AND INSURE THEM. ONE BOX WILL WEIGH 20 LBS AND THE OTHER 16 LBS SO PLEASE WAIT FOR AN INVOICE BEFORE PAYING. I WILL HAVE TO INSERT A MAILING COST HERE FOR THE LISTING BUT, DEPENDING ON YOUR LOCATION, THAT WILL CHANGE.OK, NOW TO THE DESCRIPTION. ALL ARE MARKED HALL. DIMENSIONS ARE AS FOLLLOWS. 15" HIGH X 8" DEEP X 4 3/4" WIDE. THE SMALLER ONES ARE 8" X 4 3/4" X 9" HIGH. REALLY CLEAN FOR AGE, FEW NICKS IN THE BLACK PORCELIN AND ONE PUMP HAS ... moreTAPE ON IT. PLEASE ASK ALL QUESTIONS BEFORE BIDDING SO YOU HAVE ALL YOUR DOUBTS ANSWERED. BE SURE, PLEASE. IF YOU NEED ANY SPECIFICS, PLEASE ASK AND I WILL ANSWER AS BEST I CAN. I EXPECT PAYMENT ASAP, IF POSSIBLE, OR UP TO 5 DAYS AFTER AUCTION END. I SHIP PRIORITY OR PARSEL POST WHICHEVER IS LESS FOR BUYER. IF I FAIL TO DESCRIBE MY ITEM ACCURATELY AND ITEM MUST BE RETURNED, IT WILL BE RETURNED AT BUYERS EXPENSE.
|
|
This is a great back bar cold plate ice bin with a Wunder-Bar drink dispensing system. Also I'm including a McCann's carbonator that has been tested and is working. Ready to add to your restaurant or bar? These items will help! McCann's Model- E200092 Cornelius Cold Plate Model- 2123 Ice Bin Dimensions- 21 x 23 x 36 Purchases can be picked up from Pinckneyville. IL 62274. Or shipped using your favorite freight company. The buyer will be responsible for all shipping. Handling and transaction fees(state tax, paypal, credit card) Unit is for sale locally and may be pulled prior to purchase/auction end. Unit sold in as is condition. Unless otherwise specified. Winning bid should contact me immediately through eBay to arrange for shipping, payment information and final invoice. I have ... morea lift on site and will load for free. As soon as I have received payment I will ship or load your purchase immediately. I will accept Pay Pal after initial phone contact and shipping details have been discussed and agreed upon. IL residents will be subject to state sales tax. For more information or questions please contact me through eBay or call 618-559-5128 weekdays between 10am and 5pm central time. Thank You
|
|
|
All in good shape except one has cracking throughout. Very small chips as pictured as well. Measure 8" tall. Need a good cleaning as well. I ship 1 to 2 times a week. Thanks. Posted with
|
|
This auction is for(ONE) USED LANCER PROCON PUMP( CARBONATION PUMP) It was pulled from working equipment and it is in fair looking condition; however. It has been tested and the unit hums when it is plugged but does not rotate not sure if the problem is in the motor or the pump, either way it could be rebuilt. What you see in photo is what you get. If you are looking at it, you know what it is and how much they cost new. I also will be listing a lot of other items in the future. So check out my other auctions. PLEASE READ ALL DETAILS BEFORE BIDDING ASK QUESTIONS BEFORE BIDDING IF YOU BID ON THE AUCTION YOU ARE AGREEING TO OUR TERMS AND CONDITIONS. IF YOU DO NOT AGREE OR UNDERSTAND OUR TERMS AND CONDITIONS. PLEASE ASK QUESTIONS BEFORE BIDDING. AUCTION MUST BE PAID FOR WITHIN 48 HOURS. DO NOT ... moreTRY TO MAKE US PAY FOR SHIPPING AFTER YOU WIN THE AUCTION. IF YOU HAVE SPECIAL REQUESTS. CLARIFY THEM WITH US BEFORE YOU PLACE A BID. PLEASE CONTINUE READING THE REST OF THE CONDITIONS BELOW(ALL THE WAY TO THE END) BEFORE BIDDING. Check Out My Other Auctions. I have 100% Positive Feedback. Our goal is a smooth transaction for both of us. Item is offered for sale. As is, where is, and make no warranty, guaranty or representation of any kind. The item may have flaws and/or defects if this is a used item. By submitting a bid, the bidder agrees to pay for the item within 48 hours. If you win the auction and you’re not completely satisfied when you receive the item. Email us through eBay within 3 days of receiving the item and ask for a return authorization approval. You can return it for a refund(minus listing& shipping fees) Buyer pays all return shipping costs. You must notify us before returning items. If a problem is not brought to our attention by day three, the item cannot be returned. Returned items must be post marked within 14 days of the day you received the item. Calibration Issues, Software codes, Passwords, Licenses, BIOS Upgrades or any software issues are not covered by our DOA warranty as we are selling ha
|
|
|
Two Ruby's soda/ice cream bar accessories. Straw dispenser is 11" tall. Heavy duty plastic& metal with colorful straws included. The Ruby's ceramic cafe is two pieces, a container& lid that measures 12" long, 6" wide& 7" tall. Could be used as a cookie jar. Is used, but has no chips or cracks. A colorful piece. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-14349ffb1b8-0xff-
|
|
Specifications SKU: 153616, Weight: 122 lbs. Width: 18.25 in. Depth: 26.5 in. Height: 37.25 in. Our Store Categories effepbdc Finance This Equipment For Your Business Available for purchases totalling $2.000 or more Used Stainless Restaurant Bar Ice Well w/ Cold Plate We do not accept offers containing any messages Estimate Shipping Cost, The AVERAGE Shipping for this item is $171.18. To calculate to your destination enter your zipcode here, ZipCode: Restaurant Equipment warehouse located in Norcross. GA 30093, Customer Pick Up Available( Directions to our Restaurant Equipment Warehouse) This free standing ice well could be used in any restaurant. Deli, diner, bar, or concession stand. This ice well is constructed of easy to clean stainless steel and measures 12"W x 19"D x 10"H ... moreand features a built in drain and bullet feet for added stability. This item is used and has some surface scratches and dings from use. This item does not include the front or rear panels. This item weighs 122 lbs. but we have added 50 lbs. to the weight for packing and shipping. Prior to placing your bid on this item please use the Shipping Calculator provided above to calculate the actual shipping cost to your destination. We strive to offer good shipping charges. However the size of restaurant equipment, and the cost of gas, means that freight can be expensive. Consider this amount when placing your bid, as it will be added to the final auction price. Other Related Items from ACityDiscount Atlas Metal Drop In Bar Ice Bin $967.61 $1.104.00 $1.222.11 Click here to see more items related to Used Stainless Restaurant Bar Ice Well w/ Cold Plate See other items: in this] Visit our eBay store, Terms and Conditions, The buyer agrees to be governed by the following. GENERAL• The seller is ACityDiscount. A division of Peach Trader, Inc. a Georgia corporation. A purchase from ACityDiscount represents an agreement with Peach Trader. ACityDiscount strives to create a positive experience for all our customers and welcomes your s
|
|
SODA FOUNTAIN PARTS/ ACCESSORIES(1) Soda Fountain Spare Parts Kit Item Description: This SPARE PARTS kit includes misc. clamps. Fittings, connectors, screws along with the plastic box. This KIT is USED- GOOD WORKING CONDITION. If you have some SODA to spare. These lonely SPARE PARTS would love to meet you. These SPARE PARTS cannot care for themselves. They need your love and a permanent home. You can help by adopting your SPARE PARTS today and spread the importance of saving their natural habitat. Get it TODAY while supplies last Payment: can be made by PayPal. Payment MUST BE RECEIVED within 7 days of auctions end Shipping: BUYER PAYS $12.00 FOR DOMESTIC SHIPPING/ HANDLING. Shipping is EXTRA for International Bidders. You can SAVE on shipping costs by purchasing multiple items. All sales ... moreare final. Please feel free to contact me with any questions. I will answer all questions as quick as possible. I am dedicated to offering you the highest level of customer service. They ship FAST! CHECK OUT my other auctions. New items ADDED daily.
|
|
ROUNDUP Dial-A-Cup Dispensing Unit Model: DAC-10 10 x 23 x 20.5 100% Tested- Excellent Working Condition! Speedy Reliable Transport Right To Your Doorstep! Please Call(248)723-5559 If You Have Any Questions At Global Discount Equippers We Take Great Pride And Care In Packaging Every Item We Ship To Ensure Prompt. Reliable Transport To Your Doorstep. Winning Bidders Are To Pay All Shipping And Handling Costs. All Of Our Shipping Quotes Are Based On A Commercial Delivery Location! A Lift Gate Is Required For All Items Weighing Over 150 Lbs. Please Specify If Your Delivery Location Is A Commercial Or Residential Address And If You Are In Need Of A Lift Gate To Ensure Accurate Shipping Quotes And Charges! An Additional Charge Will Be Added For Residential Delivery Locations And Lift Gates! We ... moreWill Not Be Responsible For Freight Damages After The Merchandise Leaves Our Warehouse. All Items Must Be Inspected At The Time Of Delivery For Any Damages That May(Although Rare) Have Occurred During Shipping. The Driver Should Be Made Aware Of Any And All Damages Before Leaving The Delivery Location. All Copies Of The Bill Of Lading Should Be Noted And Signed By The Consignee And The Driver. Freight Claim Must Then Be Promptly Filed. Have A Question? Please Feel Free To Contact Us Anytime! 248) 723-5559 We Are Conveniently Located At: 1450 Academy street Ferndale. MI 48220
|
|
|
USG US GAUGE Cornelius 857A Compressed Gas Regulator 500 lbs VTG 4070 USG US GAUGE UL Compressed Gas Regulator 500 lbs US Gauge Primary Regulator Minimum Inlet Pressure 500lbs. Listed Compressed Gas Regulator 857A Cor 4070 The Cornelius Co Acquired in storage auction. Don't know anything about it. Sold as is as pictured. gsrx_vers_486(GS 6.5.1(486)
|
|
|
Good working order. Item code 43015 Equipment cod G
|
|
Here’s a few pictures of the item for sale. If you need any additional shots don’t hesitate to ask. You can also stop in our shop during business hours and see it in person. Model Number: LFS Serial Number: 850084-0529 S0RVD Voltage: 115 Phase: 1 Amperage: 5 Wattage: Horsepower: This item came out of a local Dairy Queen restaurant. I am not familiar with it and do not know if it is complete or in working condition. It's being sold AS-IS. What is"AS-IS” Strictly the way we received it from the previous owner. It may or may not be complete of all its parts and it may or may not run. We will disclose and represent the machine to you exactly as it is in our inventory for you to decide. This is a wholesale auction. All equipment sales are AS-IS and final. If you are looking for used equipment ... morethat is tested by our technician and ready to go. Please go to one our retail auctions. 937)832-8600- BHequip@Frontier.com Need a shipping quote? Please contact us today and we will do our best to have a quote within 24 hours or less. Want to run your own shipping quote? Our zip code is 45315– business and we do have a loading dock at our main 10.000 sq. ft. shop and our 20,000+ sq ft storage warehouses. Don’t see what you are looking for? Call to see if we have any in stock. We list equipment on eBay once it has been cleaned and tested but you never know what we just got in… PAYMENT B&H Used Restaurant Equipment does not offer credit terms. All items. Including applicable shipping charges must be paid in full prior to shipment. We accept Cash, Wire Transfers, Cashier Checks, Money Orders, VISA, Master Card and Discover. SHIPPING B&H Used Restaurant Equipment reserves the right to ship via any responsible carrier. All shipping expenses are payable by the buyer and will be included for payment on the final invoice. Any claims arising as to shipping charges shall be resolved between the carrier and consignee. Unless otherwise stated. The purchase price is F.O.B. Place of shipment and excludes skidding or crating fo
|
|
Cornelius QST4000 Beverage Juice Dispenser Description When it comes to juice. Everyone needs options. Cornelius's QST4000 gives the flexibility to serve each product in up to four diffrent choices while helping to promote sales and satisfy each consumer’s taste profile. Which ever juice you serve, you can rely on Cornelius's highly accurate dispensing system to deliver a perfectly consistent product. Features Nameplate Data: Model QST 4000. 115 VAC, 4.5 amps, 1 phase 60 hertz, 6.25 oz. 177g) R-134a refrigerant. Test press: High side 400 psi(27.6 bar) Low side 100 psi(6.9 bar) Concentrate Storage: Four 0.8 gallon(3.0 liter) disposable bottles. Clearance Recommended: 12” 30.48 cm) on top and 4” 10.16 cm) required in back for air circulation. Electrical Connection: 6 ft. long(1.83 m) ... morepower cord with 3-prong plug attached to dispenser. Export models have line cord less plug. Power Supply: 15 amps at 120 volts dedicated power supply. Water Connection: 3/8 in. 0.95 cm) SAE male flare fitting on dispenser. Water Supply Requirements: 100 psi(7 bar) maximum static pressure. 20 psi(1.4 bar) minimum dynamic pressure; i.e. Flowing pressure measured at dispenser water inlet with 3.0 ounces(88.7 ml) per second water flow. Ice Bank/Pull Down: Weight 11-12 lbs. 4.1-4.5 kg. Pull Down: 3 hours at 75°F(24°C) Drink Capacity: 143 drinks at(3) 12 oz. drinks per minute not exceeding 45°F(7°C) 88 drinks at(3) 12 oz. drinks per minute not exceeding 45°F(7°C Specifications Model: QST4000 Serial# 62F0923JT025 Electrical: 120v/60/1 Amps: 4.5 Refrigerant: R134a Dimensions:15”w x 24-1/4" d x 29-1/4”h Shipping Weight: 15 lbs THIS ITEM HAS NO RESERVE! GOOD LUCK BIDDING! Terms and Conditions GENERAL The seller is Restaurant Equipment Paradise. A winning bid on eBay represents a purchase agreement with Restaurant Equipment Paradise. Restaurant Equipment Paradise strives to create a positive experience for all our customers and welcomes your suggestions. We value our reputation and hope you will give us
|
|
|
10 drink Coca Cola bargain has not been tested looks like to be in good condition
|
|
|
Lot Of 27 Soda Fountain/ Machine Labels Coke. Dr. Pepper, Sunkist And More! 1-Large Diet Coke 2-Small Diet Coke 2-Small Caffeine Free Diet Coke 2-Small Caffeine Free Coke Classic 3-Large Dr. Pepper 2-Small Dr.Pepper 1-Small Coke Classic 1-Large Sunkist 2-Small Sunkist 3-Small Diet Sunkist 2-Small Root Beer 2-Small A&W Diet Root Beer 1-Small A&W Cream Soda 1-Large Sprite 2-Small Welch's Grape Please Email With Any Questions. We Strive For 5 Star Service! Bid with Confidence Over 1300 Positive Feedbacks.
|
|
|
Two dual gauge CO2 regulators. Both are functional and the output gauges work great. The tank pressure gauges are both non-functional, but that does not affect the functions of the regulator. One regulator has a 3-port manifold, great for pressurizing or serving from multiple corny or sanke kegs. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-14369263ecf-0x105-
|
|
|
You Are Bidding On: 9-Used Compressed Gas Regulators. Tank Mount& Wall Mount. ALL One Money! All Look To Be In Good Condition.
|
|
|
Up for auction is a metal root beer syrup dispenser with chrome top. Black part is 9.5 inches tall. 7.5x4.4 at squared top and 6.25x3.5 at rounded middle. I believe the black part is supposed to fit into a larger serving station. It stands alone but would need to be put inside something more secure if being used as a dispenser. Do your own research and bid accordingly. Ask questions.
|
|
|