|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: , United States
Sealing machine ( SEAL 80) Parameters: Voltage : AC110V/50Hz, Power : 500W Sealing width : 250mm (Max.) Press Width : 10mm External dimension: 420*300*185mm. Net weight : 5 kg Feature: All plastic shell Fashionable design,safety of insulation is good Convenient for changing the knife blade External standard surgical knife blade, easy to get.
Buy It Now
Free Shipping
Condition: New Location: , United States
What's Included? 1. Machine 1 2. Power cord 1 3. Instructions for use 1 Weights&Dimensions Dimensions: 205L*195W*115H Weight: 2.2kg Mixing time: Adjustable from 1 to 60 seconds Power input: 110V 60Hz (US plug) Power: 30 Watts.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
$8.00 Shipping
Condition: Used Location: Brownsville, United States
Tested works
Buy It Now
$29.99 Shipping
Condition: New Location: , Canada
0 bids $35.00 Shipping
Condition: Used Location: Ridgefield, United States
Dentsply Triad 2000 Dental Lab Equipment, Dentist Tooth Curing Light Working. Condition is Used. Shipped with USPS Ground Advantage.
0 bids Free Shipping
Condition: New Location: Miami, United States
Excellent Quality Stainless Steel.
0 bids Free Shipping
Condition: New Location: Miami, United States
Stainless Steel. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids $1.99 Shipping
Condition: New Location: Chino, United States
Designed for mounting pre-cast dental models. Feature: on the fixed jaw. Quantity: 1 set. Size: 14.6 15 10.3cm.
0 bids Free Shipping
Condition: New Location: Miami, United States
Stainless Steel. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids Free Shipping
Condition: New Location: Gresham, United States
The electric motor matches the "E"type international interfaceIt can be matched with 1:5,1:1,16:1 internal waterway handpiece. Dental LED Electric Motor Minimally invasive repair,polishing,pulp preparation hole,etc.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , United States
Dental plaster Model Arch Trimmer Trimming Machine Dental Lab Equipment 2800rpm Features: This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Specification: Power Supply:110V 60Hz(US PLUG) Power Consumption:250W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg Package Including: Dental Model Arch Trimmer Machine: 1 set.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental plaster Model Arch Trimmer Trimming Machine Dental Lab Equipment 2800rpm Features: This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Specification: Power Supply:110V 60Hz(US PLUG) Power Consumption:250W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg Package Including: Dental Model Arch Trimmer Machine: 1 set.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
1 Plaster filter. TypeDental Lab Plaster Filter. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and. Material: Polypropylene. Color: gray. MPNDoes Not Apply.
0 bids Free Shipping
Condition: New Location: City of Industry, United States
Steam Autoclave Sterilizer 18L High Pressure Uperization Eqpt. Tattoo Dental Lab. If the pressure pointer of pressure gauge reaches the 0.165MPa and the safety valve does not exhaust, it should stop using at once and check up the safety valve.
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Fullerton, United States
Sterilizer temperature/pressure：121℃/0.12Mpa; 134℃/0.22Mpa. Tank capacity: 18L. Connect steam exhaust pipe with the steam vent，before operation. Avoid overheat protect device: when inter temperature overheat, power break electric current automatically.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
$35.00 Shipping
Condition: New Location: , China
1 piece Denture Flask. Dental Flask used for compressor. Dental Flask easy to handle and operate for Resin teeth.
Buy It Now
Free Shipping
Condition: New – Open box Location: , United States
Upgrade 35K RPM Handpiece(H73L1). 35K RPM Handpiece. Marathon N3 without Handpiece. And it is applied to cutting, grinding, polishing. The products are mainly used for dental laboratory and dental clinic.
0 bids Free Shipping
Condition: New Location: , United States
GreatLife Dent Thermoforming Machine Dental Lab Vacuum Forming Molding Dental Vacuum Former Vacuum Forming Machine Dental.
0 bids $6.40 Shipping
Condition: New Location: , China
Battery adapter output : 5V-1A. Output : 1.8W Max. Battery adapter input : 100V-240V 0.5A Max. The main unit cannot be autoclaved. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids Free Shipping
Condition: New Location: , United States
Invisible Dental Flexible Denture Machine Injection Molding System Lab 400W 110V. Lab Invisible Dental Flexible Denture Machine Injection Molding System 400W 110V. the Denture Injection Unit Consists of a Heater and a Hot Press.
0 bids Free Shipping
Condition: New Location: Chino, United States
This centrifugal casting machine is indispensible for the production of high quality oral restorations. Long handle tongs x1. Centrifugal Casting Machine x1. Maximum eccentric weight: 1.25 kg. This product is simple in structure, convenient operation, easy maintenance.
0 bids $10.00 Shipping
Condition: New Location: , China
Large Magnetic Articulator. 2100% High quality and reasonable price. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Dental Vacuum Forming & Molding Machine JT-18. Temporary, Permanent Base, Dental Care of the Molding and Production. Decolorization Braces Forming and Production. Durable and User-friendly, the Machine Will Withstand Years of Rigorous Use and Prove to Be an Indispensable Tool for Any Dental Office.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
1 Plaster filter. TypeDental Lab Plaster Filter. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and. Material: Polypropylene. Color: gray. MPNDoes Not Apply.
0 bids $8.00 Shipping
Condition: New Location: La Puente, United States
Product Description: ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. . ★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time. ★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists. ★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded.
Buy It Now
Free Shipping
Condition: New Location: , United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
$38.70 Shipping
Condition: New Location: Chino, United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
Buy It Now
Free Shipping
Condition: New Location: , United States
It has aobtained the national invention. Portable Dental Lab Digital Singlerow Dust Collector Vacuum Cleaner Suction Base. 1X Dental Portable Desktop Suction Base. cushions for making the suction inlet near.
Buy It Now
Free Shipping
Condition: New Location: , United States
A Good Tool Is Indispensable for Tedious Vibration Work. Our Dental Square Quartet Vibrator Is Mainly Made of Various High-quality Materials and Adopts a Painting Process to Ensure That You Can Use It for a Long Time. Good Performance(120w) Can Make Your Vibration Work More Efficient. It Will Be a Good Helper in Your Work.
0 bids Free Shipping
Condition: New Location: , China
50000rpm brushless micromotor. Rotate speed: 50000RPM. Portable, foot pedal, adjustable, strong power, best quality, high-end sports car design, durable. Model: GJ-G800+XM. Or replace item for you. 110V/220V micromotor.
0 bids Free Shipping
Condition: New Location: , United States
This injection system is composed of a heater and a hot press. The heater will make a beep sound when it finishes heating. Structure and working principle The function of the hot press is that it injects the molten material into flask.
0 bids Free Shipping
Condition: New Location: , United States
Dental plaster Model Arch Trimmer Trimming Machine Dental Lab Equipment 2800rpm Features: This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Specification: Power Supply:110V 60Hz(US PLUG) Power Consumption:250W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg Package Including: Dental Model Arch Trimmer Machine: 1 set.
0 bids $99.00 Shipping
Condition: New Location: Norcross, United States
The mixing tank of the machine is made of stainless steel, which is corrosion resistant, and the property of the Duplicating Gel will not be changed. The machine can heat, mix, cool down automatically.
Buy It Now
Free Shipping
Condition: New – Open box Location: , United States
Upgrade 35K RPM Handpiece(H73L1). 35K RPM Handpiece. Marathon N3 without Handpiece. And it is applied to cutting, grinding, polishing. The products are mainly used for dental laboratory and dental clinic.
Buy It Now
$14.82 Shipping
Condition: New Location: Chino, United States
4)Weights&Dimensions Weight: 6kg Forming size:126*126mm Dimensions: 25 × 21 × 30cm 5)Specifications Model: JT-018 Voltage: 110V/60Hz ± 10% Motor Power: 800W Heating Power: 600W.
0 bids Free Shipping
Condition: New Location: Chino, United States
Perfect for surveying aligners, models, and appliances, it your production process, saving and enhancing accuracy. Key features include an intuitive interface for easy operation, durable construction for-lasting performance, and compatibility with advanced software.
Buy It Now
$39.63 Shipping
Condition: New Location: Chino, United States
Specification Model: ZY-260 Color: Silver Material: 304 Stainless Steel Working Medium: Steam Voltage: 110V (AC) Power: 1.2KW Frequency: 50HZ Capacity: 8L/ 2.11Gal/ 8.5Qt Volume: 0.010m³/ 0.353ft³ Design Pressure: 0.17MPa Design Temperature: 129℃/ 264.2℉ Over-pressure Self-discharge: 0.145-0.165Mpa Maximum Operating Temperature: 126-128℃/ 258.8-262.4℉ Sterilization Chamber Dimensions: 24*12cm/ 9.45*4.72in Product Size: 33*33*26cm/ 12.9*12.9*10in Package Size: 36*36*30cm/ 14.17*14.17*11.81in Net Weight: 6.5kg/ 14lbs Gross Weight: 8kg/ 17.64lbs Package Included 1* Autoclave 1* Pot Lid 1* Sterilized Inner Cylinder 1* Wing Wrench 1* English Instruction Manual.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids $20.00 Shipping
Condition: New Location: , United States
Dental Wet Model Trimmer Abrasive Machine Gypsum Arch Inner Disc Wheel 500W JT19 + Dental Lab 4" Round Vibrator Variable Speed Shaker Oscillator 100W for Dentist.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Motor Power: 800W. Vacuum Forming Machine is specially designed for dental applications. Durable and user-friendly, our Vacuum Forming Machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office.
Buy It Now
Free Shipping
Condition: New Location: , United States
Details Dust Cover: This tabletop dust collector base comes with a dust cover that swings up and down to effectively prevent dust from fluttering out. Filter Mesh: It comes with a filter mesh that effectively keeps large particles of debris out and extends the use of the dust collector. Application It can be used in factories, workshops, homes and other places where dust needs to be extracted. Specification Material: Plastic Packing Size: 14.5*14*13cm/5.7*5.5*5.11in Base Diameter: 13cm/5.11in Product Height: 14.5cm/5.7in Gross Weight: 0.45kg/0.99lbs Package Included 1* Desk-top Portable Suction Base.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Lab Digital Single-Row Dust Collector Vacuum Cleaner 370W for Laboratory. cushions for making the suction inlet near. The suction hose is. This compact desk-top portable suction base brings a substantive.
0 bids $49.90 Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
$71.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Buy It Now
Free Shipping
Condition: New Location: Van Nuys, United States
Dental Lab Alginate /Die Semi-automatic Alginate Mixer Stone Mixer HL-YMC I. It has characteristics of labor-saving, fast, well mix and less bubble. Then mix them to bulk state. Press “Stop” button to stop working.
Buy It Now
Free Shipping
Condition: New Location: South El Monte, United States
Also used for cutting excessive wax. Quantity: 1pc/10pcs. Color: Silver. Full Autoclavable / Reusable.
0 bids Free Shipping
Condition: New Location: Perth Amboy, United States
Two locking casters provide stability on uneven surfaces. The wide handle ensures a comfortable grip for easy maneuvering. A2: Maximum Weight Capacity: 220 lbs/100 kg. And weight capacity of the top Layer: 99 lbs/45 kg, the second layer: 121 lbs/55 kg.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
$50.00 Shipping
Condition: New Location: Chino, United States
After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet). Connect the power cord, and switch on the power switch (O=off, l=on). Possible reason ： ① fuse get burnt ； ② motor get burnt ； ③ switch get wrong 。.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Weights&Dimensions Weight: 6kg Forming size:126*126mm Dimensions: 25 × 21 × 30cm Specifications Model: JT-018 Voltage: 110V/60Hz ± 10% Motor Power: 800W Heating Power: 600W What's Included? Main unit(Vacuum forming machine) x 1 1x Bag of steel grits Power cord x 1 Manual x 1.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg.
|
|
|
|