|
|
Order by: |
0 bids Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
0 bids Free Shipping
Condition: New Location: Gresham, United States
35K R.P.M. handpiece 1 PC. SDE-37L Motor Handpiece for Dental Lab and jewelry beauty wood carving. MARATHON Handpiece High-speed 0-35,000rpm. MARATHON Motor Handpiece Instructions for use. Products not only with dental technicians polished, it can also apply precious stones, polishing, fine polished wood with other industries.
0 bids $5.00 Shipping
Condition: New Location: , China
1 Wax Spatula. Material:High Quality Stainless Steel. Highly polished finish for aesthetic and corrosion resistance.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
The vibrator is mainly composed of pedestal and vibrator plate. It is also installed the knot for adjusting the intensity of the vibration. 1 x New JT-51B X Small Square Dental Vibrator. Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity.
Buy It Now
Free Shipping
Condition: New Location: Hialeah, United States
Exceptions are stated below. PRIVACY AND PROTECTION OF PERSONAL INFORMATION Your privacy is important to us. They are required to maintain the confidentiality of the information and are prohibited from using that information for any other purpose.
0 bids $7.73 Shipping
Condition: New Location: , China
1 Adjustable Magnetic Articulator. Rubber-lined base plate ensures secure mount and protects models. Quickly and easily mount pre-cast. Picture Display. Quick-release hinge allows separation of arches.
0 bids $20.00 Shipping
Condition: New Location: Chino, United States
Remarks: Before operation this therapeutic device need to connect with oil free compressor. Clean water bottle 600ML. 1 set. Saliva ejector. 1 set. 3-way air/water syringe. 1 set. High speed air turbine Handpiece tube. 1 set.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids $21.00 Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Gresham, United States
The electric motor matches the "E"type international interfaceIt can be matched with 1:5,1:1,16:1 internal waterway handpiece. Dental LED Electric Motor Minimally invasive repair,polishing,pulp preparation hole,etc.
0 bids Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Chino, United States
Sealing machine ( SEAL 80) Parameters: Voltage : AC110V/50Hz, Power : 500W Sealing width : 250mm (Max.) Press Width : 10mm External dimension: 420*300*185mm. Net weight : 5 kg Feature: All plastic shell Fashionable design,safety of insulation is good Convenient for changing the knife blade External standard surgical knife blade, easy to get.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
$5.00 Shipping
Condition: New Location: Chino, United States
Sealing Machine ( Seal 80) Parameters: Voltage : Ac110v/50hz, Power : 500w Sealing Width : 250mm (Max.) Press Width : 10mm External Dimension: 420*300*185mm. Net Weight : 5 Kg.
Buy It Now
$82.65 Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
$110.00 Shipping
Condition: New Location: , China
Quiet operation won’t disturb. A: No, the plastic dust vacuum tube is not included with the product. Dust Connector Size Flange 98mm 1pc;. Dust Collection Built-in port and drawer. Connector design with flange type, easily adapt to the dust collector tube.
Buy It Now
Free Shipping
Condition: New Location: Austell, United States
Features: This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Specification: Power Supply:110V 60Hz(US PLUG) Power Consumption:250W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg Package Including: Dental Model Arch Trimmer Machine: 1 set.
Buy It Now
Free Shipping
Condition: New Location: , United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
USA Dental Vacuum Molding Forming Machine Vacuum Former Thermoforming 110V 👄Features: 1. Heavy-duty vacuum motor provides precise downward suction 2. Features a symmetrical heating system, ensuring uniform heat distribution 3. Adjustable, rust-resistant body accommodates various materials 4. Suitable for a wide range of clinical applications 5. Non-rotating sliding frame makes operation easy and stress-free 6. Compatible with all dental thermoplastics 7. The motor of vacuum former is strategically placed below its perforated stage, which creates a direct downward suction, ensuring the utmost precision. 8. Durable and user-friendly, the machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office. 👄 Application Range: 1. Decolorization.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
★ the Denture Injection Unit Consists of a Heater and a Hot Press. Press Dentistry Injection System 400W 110V 282-288 ° C. 3 the Heater Will Beep When It Is Heated. 1x Power Cord. 1x Hot Press. 2 the Function of the Hot Press Is to Inject Molten Material into a Previously Prepared Flask.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Product Name：Dental Amalgamator Models: IMIX-M3, IMIX-M6 Shell Material: Plastic Power: According to the Nameplate Motor Power: 35W Storage Conditions: -10∽40℃, Relative Humidity≤80%, No Corrosive Gas and Ventilated Places. Warranty: 1 year Package Included 1* Dental Amalgamator 4* Springs 2* Fusing core 0.5A Ф5X20 1* English Instruction 1* Warranty Card.
0 bids Free Shipping
Condition: New Location: Cranbury, United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle.
0 bids Free Shipping
Condition: New Location: , United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Color: Blue Material: Aluminum, Stainless Steel Process: Painting Plug Type: US Standard Voltage: 110V, 60Hz ±10% Power: 1000W Heating Power: 600W Molding Power: 800W Power Cord Length: 1.2-1.5m/3.94-4.92ft Molding Size: 110*110mm/4.33*4.33in Product Size: 25*21*30cm/9.84*8.27*11.81in Package Size: 30*25*21cm/11.81*9.84*8.27in Gross Weight: 6kg/13.28 lbs Net Weight: 6kg/13.28 lbs Package Included 1* Forming Machine Notes 1.Please note that this product does not include diaphragms. 2.Please note that after using the machine, do not forget to turn off the heating switch, otherwise, it may burn out the heater. 3.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before o.
0 bids $30.00 Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description This forming machine is indispensable professional equipment in dental clinics and laboratories. The premium materials and exquisite craftsmanship give it excellent durability. High power and symmetrical heating elements can achieve uniform and rapid heating, ensuring precise molding effects. Its compact structure does not take up too much space wherever it is placed, and we believe it is a good helper for your work.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Motor Power: 800W. Vacuum Forming Machine is specially designed for dental applications. Durable and user-friendly, our Vacuum Forming Machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: Fullerton, United States
Dental Lab Splint Thermoforming Material Plate - Bio-Art Vacuum Forming Sheets have been specially developed for use by dental professionals with the objective of enabling the production of trays for all kinds of applications (fluoridation, bracket fixation, plate for bruxism, surgical guide, matrix for temporary prosthetic teeth, etc.).
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity. Cut off the power when finish. Wash the surface of the machine frequently to keep clean, so as to extend the service life.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
$72.42 Shipping
Condition: New Location: , China
Rotate speed. LED speed display window shows an intuitive and easy speed selection. High precision concentricity rotation clamping system. Less-vibration, strong torque and durability. Contribute to low heat, low noise and low vibration.
0 bids Free Shipping
Condition: New Location: , United States
High Security: The reinforced power cord interface is durable and safe. And it has an anti-dry burning function. Open the lid of the autoclave, take out the sterilized inner cylinder in the autoclave, and pour more than 3.5L/0.925Gal of water into the electric heating tube.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental 4" Round Vibrator Shaker Oscillator Variable-Intensity Model Vibrator USA Dental 4" Round Vibrator, Variable Speed Vibrator, variable-intensity model vibrator, 4" Round Lab Shaker Oscillator, Lab Shaking Vibrator, Lab mixing plaster/gypsum, pouring models, and investing Vibrator This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
0 bids $20.12 Shipping
Condition: Brand New Location: , China
It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Wish you understand. Remote Area. Power: AC 220V/50HZ. Power consumption: 250W. Tech Date.
0 bids Free Shipping
Condition: New Location: Chino, United States
USA Dental Vacuum Molding Forming Machine Vacuum Former Thermoforming 110V ??Features: 1. Heavy-duty vacuum motor provides precise downward suction 2. Features a symmetrical heating system, ensuring uniform heat distribution 3. Adjustable, rust-resistant body accommodates various materials 4. Suitable for a wide range of clinical applications 5. Non-rotating sliding frame makes operation easy and stress-free 6. Compatible with all dental thermoplastics 7. The motor of vacuum former is strategically placed below its perforated stage, which creates a direct downward suction, ensuring the utmost precision. 8. Durable and user-friendly, the machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office. ?? Application Range: 1. Decolorization.
0 bids $4.99 Shipping
Condition: New Location: , China
This is Reline Jig for dental laboratory use. Convenient and Practical.
0 bids Free Shipping
Condition: New Location: Chino, United States
Polisher Polishing Machine Dental Lab Lathe Bench Buffing Grinder Jewelry 110V. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation.
0 bids Free Shipping
Condition: New Location: , United States
Adjustable Height: 75.5-115cm/29.72-45.28in. Wheel Type: 4 Lockable Universal Wheels. Material: SPCC. Your satis faction is our ultimate goal. Assembly Required: Yes. Other Accessories for Assembly. 1 English Installation Diagram.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Motor rotational speed:2,800rpm. Your satis faction is our ultimate goal. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and.
Buy It Now
Free Shipping
Condition: New Location: , United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Dental Vacuum Forming & Molding Machine JT-18. Temporary, Permanent Base, Dental Care of the Molding and Production. Decolorization Braces Forming and Production. Compatible with All Dental Thermoplastics.
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity. Cut off the power when finish. Wash the surface of the machine frequently to keep clean, so as to extend the service life.
Buy It Now
Free Shipping
Condition: New Location: Los Angeles, United States
Order your tray in your favorite color! Impression Material. Flat size B (Ritter) tray: 13-3/8" x 9-5/8" x 7/8". Choose Color & Qty. Health & Beauty.
0 bids Free Shipping
Condition: New Location: , United States
Dental plaster Model Arch Trimmer Trimming Machine Dental Lab Equipment 2800rpm Features: This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Specification: Power Supply:110V 60Hz(US PLUG) Power Consumption:250W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg Package Including: Dental Model Arch Trimmer Machine: 1 set.
0 bids Free Shipping
Condition: New Location: Ambala G.P.O., India
Intended Use/Discipline : Blood Centrifuge Machine With 4 Tube Hand Operated. Hand Operated With 4 Tube Blood Centrifuge Machine. Hand Operated Centrifuge Machine 4 Tube. We take pleasure to introduce ourselves as one of the renowned firms for providing the best-in-class range of Hand Centrifuge Machine.
Buy It Now
$10.00 Shipping
Condition: New Location: , United States
Package Included 1* Autoclave 1* Pot Lid 1* Sterilized Inner Cylinder 1* Wing Wrench 1* English Instruction Manual.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
|
|
|
|