|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Chino, United States
Polisher Polishing Machine Dental Lab Lathe Bench Buffing Grinder Jewelry 110V. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation.
0 bids Free Shipping
Condition: New Location: , IL
Material: Stainless Steel.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Rotational speed 3000rpm. 550W Dual-Lathe Polishing Machine Dental Bench Polisher Jewelry Buffing Grinder. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation.
0 bids $5.00 Shipping
Condition: New Location: , China
Material: High grade stainless steel. Size: As the picture shown.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids $5.00 Shipping
Condition: New Location: , China
1 Wax Spatula. Material:High Quality Stainless Steel. Highly polished finish for aesthetic and corrosion resistance.
Buy It Now
Free Shipping
Condition: New Location: , China
(This is a simple press and a dental double press with denture flasks, used for making denture models. Main Features : 1) Simple structure in linear type ,easy in installation and maintation.
0 bids Free Shipping
Condition: New Location: La Puente, United States
A Good Tool Is Indispensable for Tedious Vibration Work. Our Dental Square Quartet Vibrator Is Mainly Made of Various High-quality Materials and Adopts a Painting Process to Ensure That You Can Use It for a Long Time. Good Performance(120w) Can Make Your Vibration Work More Efficient. It Will Be a Good Helper in Your Work.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Lab Digital Single-Row Dust Collector Vacuum Cleaner 370W for Laboratory. cushions for making the suction inlet near. The suction hose is. This compact desk-top portable suction base brings a substantive.
0 bids Free Shipping
Condition: New Location: Fort Lauderdale, United States
Material: Premium Grade Stainless Steel. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. PRECISE CANADA. CARE FOR YOUR LIFE AND HEALTH.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
0 bids Free Shipping
Condition: New Location: , United States
This injection system is composed of a heater and a hot press. The heater will make a beep sound when it finishes heating. Structure and working principle The function of the hot press is that it injects the molten material into flask.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
JT19 500W Dental Wet Model Trimmer Abrasive Machine Gypsum Arch Inner Disc Wheel Highlights: 1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve 2. Connect the waste-disposal tube to the unit 3. Connect the power cord, and switch on the power switch (O=off, l=on) 4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18) 5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental electric Micromotor Motor Polishing Handpiece 35K RPM Introduction: Micro motor DENTAL Handpiece is an instrument made with motor and used for working with the turning force from the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc. Feature: 1. Portable Design-it is very convenient to use and take Installed special ball bearings for super high speed (So do not need add oil) 2.35,000 RPM's provides higher speeds, greater torque 3. Newly designed front nose.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
(In Addition, This Wax Pot Features an Insulated Thermoplastic Housing Which Remains Cool While Wax Stays Hot! 1 Wax Heater Machine. 3) Indicator Light That Goes Off When Unit Reaches Desired Temperature.
0 bids Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
0 bids Free Shipping
Condition: New Location: Chino, United States
Power: 500W. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet). If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18).
0 bids Free Shipping
Condition: New Location: Fullerton, United States
The brush head fits the Oral-B brush head. DuPont wool: 6mil, outer ring 8.5mm, inner ring 7mm, round brush head, brush hair more than 90% round head. The brush head with 4 different colors, color distinguish ring.
Buy It Now
Free Shipping
Condition: New Location: , United States
Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity. Cut off the power when finish. Wash the surface of the machine frequently to keep clean, so as to extend the service life.
0 bids Free Shipping
Condition: New Location: , United States
Features: Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg The package includes: 1X heater 1X hot press 1X picking stick 1X small top bar 1X Big Top Bar 1X Type Box 1X box wrench 1X power cord 1Xproduct brochure.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Polisher Polishing Machine Dental Lab Lathe Bench Buffing Grinder Jewelry 110V. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Weights&Dimensions Weight: 6kg Forming size:126*126mm Dimensions: 25 × 21 × 30cm Specifications Model: JT-018 Voltage: 110V/60Hz ± 10% Motor Power: 800W Heating Power: 600W What's Included? Main unit(Vacuum forming machine) x 1 1x Bag of steel grits Power cord x 1 Manual x 1.
0 bids Free Shipping
Condition: New Location: Chino, United States
Its compact structure does not take up too much space wherever it is placed, and we believe it is a good helper for your work. It is suitable for a wide range of materials and many clinical applications, and is compatible with almost all dental thermoplastics, making it an indispensable tool for any dental practice.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Product Name：Dental Amalgamator Models: IMIX-M3, IMIX-M6 Shell Material: Plastic Power: According to the Nameplate Motor Power: 35W Storage Conditions: -10∽40℃, Relative Humidity≤80%, No Corrosive Gas and Ventilated Places. Warranty: 1 year Package Included 1* Dental Amalgamator 4* Springs 2* Fusing core 0.5A Ф5X20 1* English Instruction 1* Warranty Card.
0 bids Free Shipping
Condition: New Location: Cranbury, United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle. Fully adjustable.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: 1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve 2. Connect the waste-disposal tube to the unit 3. Connect the power cord, and switch on the power switch (O=off, l=on) 4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18) 5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet) Specifications Voltage: 110V/60Hz±10%.
Buy It Now
Free Shipping
Condition: New Location: , United States
Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity. Cut off the power when finish. Wash the surface of the machine frequently to keep clean, so as to extend the service life.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Color: Blue Material: Aluminum, Stainless Steel Process: Painting Plug Type: US Standard Voltage: 110V, 60Hz ±10% Power: 1000W Heating Power: 600W Molding Power: 800W Power Cord Length: 1.2-1.5m/3.94-4.92ft Molding Size: 110*110mm/4.33*4.33in Product Size: 25*21*30cm/9.84*8.27*11.81in Package Size: 30*25*21cm/11.81*9.84*8.27in Gross Weight: 6kg/13.28 lbs Net Weight: 6kg/13.28 lbs Package Included 1* Forming Machine Notes 1.Please note that this product does not include diaphragms. 2.Please note that after using the machine, do not forget to turn off the heating switch, otherwise, it may burn out the heater. 3.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before o.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: , China
This unit is used for the pre-pressing process of dental flasks for dental restoration. Pressure Display: 0-25MPa. Working Pressure: 8-15MPa. Machine × 1. Weight: 20kg.
0 bids $10.00 Shipping
Condition: New Location: Chino, United States
Dental flexible denture machine is a 400W/110V dental laboratory equipment for making flexible removable partial dentures. ★ The denture produced by the invisible denture injection molding machine has almost no waste edge, and the grinding process can be completed at one time. ★The denture injection system is easy to operate, has a long service life, low maintenance cost, high success rate, and dental laboratory equipment for denture injection system, which is very necessary for dentists. ★ This machine is produced according to international standards. The operation is simple, time-saving, the casting success rate is high, and the common tooth box can also be injection molded.
Buy It Now
$2.00 Shipping
Condition: New Location: , China
You can quickly gain high heat to the wax carver and it is safe and efficient to use. Energy efficient operation due to advanced electronic sensor. Multiple heat dissipation holes, reduce the heat generation of the machine during use, and extend the service life.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: , United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
Buy It Now
$27.58 Shipping
Condition: New Location: , China
The lever depressed after heating the soft film covering the plaster model. Note:This item only support 220V! Decolorization braces forming and production. Compatible with all dental thermoplastics.
0 bids $10.00 Shipping
Condition: New Location: , United States
Main unit 1.
0 bids $4.14 Shipping
Condition: New Location: , China
Battery adapter output : 5V-1A. Output : 1.8W Max. Battery adapter input : 100V-240V 0.5A Max. The main unit cannot be autoclaved. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm Statement (FDA, ARTG) The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. If you have any problem. Please contact us through eBay Message and we will gladly assist you.
Buy It Now
$5.99 Shipping
Condition: New Location: , China
Model:Large/Small
0 bids Free Shipping
Condition: New Location: Fullerton, United States
Sterilizer temperature ： 121 ℃. Sterilization is working. Material ： Stainless steel #304. Plate 3pcs ( Size:201 136 21 mm). Standard accessories Main unit 1pc. Wait for the pressure gauge pointer to zero, opened the door cover.
0 bids $2.00 Shipping
Condition: New Location: , United States
9:00 AM - 5:30PM (Beijing). 510(K)Number: K161892. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. (Amy-China-Beijing-86-13578947868).
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity. Cut off the power when finish. Wash the surface of the machine frequently to keep clean, so as to extend the service life.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental plaster Model Arch Trimmer Trimming Machine Dental Lab Equipment 2800rpm Features: This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Specification: Power Supply:110V 60Hz(US PLUG) Power Consumption:250W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg Package Including: Dental Model Arch Trimmer Machine: 1 set.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids $4.14 Shipping
Condition: New Location: , China
Dental Lab Brushless Micromotor Electric Popular Micro polishing. 1 50K RPM handpiece. Application area: widely used in precise grinding, carving and polishing for false teeth, precious stone, jewelry, nails, mold, handicrafts and so on.
0 bids Free Shipping
Condition: New Location: Chino, United States
Weights&Dimensions Weight: 6kg Forming size:126*126mm Dimensions: 25 × 21 × 30cm Specifications Model: JT-018 Voltage: 110V/60Hz ± 10% Motor Power: 800W Heating Power: 600W What's Included? Main unit(Vacuum forming machine) x 1 1x Bag of steel grits Power cord x 1 Manual x 1.
0 bids Free Shipping
Condition: New Location: Gresham, United States
A. blue ray. Input of adapter:100V to 240V~50Hz/60Hz. The optical fiber can be autoclaved to the high temperature and pressure. Light source We will always make every attempt possible to resolve issues if we made a mistake.
Buy It Now
Free Shipping
Condition: New Location: , United States
It has aobtained the national invention. Portable Dental Lab Digital Singlerow Dust Collector Vacuum Cleaner Suction Base. 1X Dental Portable Desktop Suction Base. cushions for making the suction inlet near.
Buy It Now
$64.30 Shipping
Condition: New Location: , China
Decolorization braces forming and production. Compatible with all dental thermoplastics. Durable and user-friendly, the machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office.
Buy It Now
Free Shipping
Condition: New Location: , United States
After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet). 4" Round Vibrator. Quiet, powerful, and highly durable, this is the perfect tool for any dentist!
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
|
|
|
|