|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: , United States
1 Plaster filter. you should consult with the FDA's Center for Devices and Radiological Health state and local regulatory agencies. If the item is subject to FDA regulation. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental electric Micromotor Motor Polishing Handpiece 35K RPM Introduction: Micro motor DENTAL Handpiece is an instrument made with motor and used for working with the turning force from the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc. Feature: 1. Portable Design-it is very convenient to use and take Installed special ball bearings for super high speed (So do not need add oil) 2.35,000 RPM's provides higher speeds, greater torque 3. Newly designed front nose.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Chino, United States
Its compact structure does not take up too much space wherever it is placed, and we believe it is a good helper for your work. It is suitable for a wide range of materials and many clinical applications, and is compatible with almost all dental thermoplastics, making it an indispensable tool for any dental practice.
0 bids Free Shipping
Condition: New Location: , United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Sealing machine ( SEAL 80) Parameters: Voltage : AC110V/50Hz, Power : 500W Sealing width : 250mm (Max.) Press Width : 10mm External dimension: 420*300*185mm. Net weight : 5 kg Feature: All plastic shell Fashionable design,safety of insulation is good Convenient for changing the knife blade External standard surgical knife blade, easy to get.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: , United States
Sealing machine ( SEAL 80) Parameters: Voltage : AC110V/50Hz, Power : 500W Sealing width : 250mm (Max.) Press Width : 10mm External dimension: 420*300*185mm. Net weight : 5 kg Feature: All plastic shell Fashionable design,safety of insulation is good Convenient for changing the knife blade External standard surgical knife blade, easy to get.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Press Dentistry Injection System 400W 110V 282-288 ° C. ★ the Denture Injection Unit Consists of a Heater and a Hot Press. TypeDental Lab Flexible Denture Machine. 3 the Heater Will Beep When It Is Heated.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Product Name：Dental Amalgamator Models: IMIX-M3, IMIX-M6 Shell Material: Plastic Power: According to the Nameplate Motor Power: 35W Storage Conditions: -10∽40℃, Relative Humidity≤80%, No Corrosive Gas and Ventilated Places. Warranty: 1 year Package Included 1* Dental Amalgamator 4* Springs 2* Fusing core 0.5A Ф5X20 1* English Instruction 1* Warranty Card.
0 bids Free Shipping
Condition: New Location: Chino, United States
1 Adjustable Magnetic Articulator. Teeth Whitening Dental Bleaching System Oral Gel Kit Tooth Whitener Laser Light. USA Denshine Dental LED Fiber Optic High Speed Handpiece E-Generator 2-Holes FDA. Teeth Whitening Dental Bleaching System Oral Gel Kit Tooth Whitener Blue Light.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Press Dentistry Injection System 400W 110V 282-288 ° C. ★ the Denture Injection Unit Consists of a Heater and a Hot Press. 3 the Heater Will Beep When It Is Heated. 1x Hot Press. 2 the Function of the Hot Press Is to Inject Molten Material into a Previously Prepared Flask.
0 bids Free Shipping
Condition: New Location: , United States
Weights&Dimensions Weight: 6kg Forming size:126*126mm Dimensions: 25 × 21 × 30cm Specifications Model: JT-018 Voltage: 110V/60Hz ± 10% Motor Power: 800W Heating Power: 600W What's Included? Main unit(Vacuum forming machine) x 1 1x Bag of steel grits Power cord x 1 Manual x 1.
Buy It Now
Free Shipping
Condition: New Location: , United States
Specifications: Product Name: Beauty Instrument Cart Table Size: Length 35.5 X Width 33.5cm Panel Color: White Package Size: 68.5 * 37 * 15cm Weight: 6.1kg Scope of Use: Beauty Salon, Barber Shop, Studio Whether the Socket Is Equipped With：yes（Us Socket) Voltage: 110v,60hz Max Load: 45kg Features: High Quality Material, Environmental Protection. It Is Easy to Install and Use. Trolley with Pulley, Easy to Move. With Storage Box, Small Objects Can Be Placed. With Socket Design, Efficient and Convenient. Packing List: 1 X Beauty Instrument Cart 1 X 110v Power Cord.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg The package includes: 1X heater 1X hot press 1X picking stick 1X small top bar 1X Big Top Bar 1X Type Box 1X box wrench 1X power cord 1Xproduct brochure.
0 bids Free Shipping
Condition: New Location: , United States
Input power: 370W. Assist very well during dental unit's suction failure or insufficiency. Comfortably located next to dental chair. Anti-vibration system and silencer for the exhauster air and non stop suction motor's noise.
Buy It Now
Free Shipping
Condition: New Location: La Puente, United States
A Good Tool Is Indispensable for Tedious Vibration Work. Our Dental Square Quartet Vibrator Is Mainly Made of Various High-quality Materials and Adopts a Painting Process to Ensure That You Can Use It for a Long Time. Good Performance(120w) Can Make Your Vibration Work More Efficient. It Will Be a Good Helper in Your Work.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental 4" Round Vibrator Laboratory Equipment Oscillator Mixing Plaster Shaker 4" Dental Round Vibrator Shaker Oscillator variable-intensity model vibrator lab Dental 4" Round Vibrator, Variable Speed Vibrator, variable-intensity model vibrator, 4" Round Lab Shaker Oscillator, Lab Shaking Vibrator, Lab mixing plaster/gypsum, pouring models, and investing Vibrator This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm .
0 bids Free Shipping
Condition: New Location: Cranbury, United States
1 Duplicating Flasks. Made from durable aluminum, this flask is designed to withstand the rigors of daily use. It is perfect for duplicating molds and creating accurate replicas of dental impressions.
0 bids $5.00 Shipping
Condition: New Location: Cranbury, United States
Connect steam exhaust pipe with the steam vent，Before operation. Sterilization tray ×3pcs ; steam exhaust pipe ×1pc. Before open the DOOR(Do not close the power switch and close the steam. Avoild overheat protect device: when inter temperature overheat, power break electric current automatically. ).
0 bids Free Shipping
Condition: New Location: , United States
Motor handpiece 1pcs. Handpiece stand 1pcs. Handpiece holder 1pcs. When adjusting the speed, do not press the right switch button, wait for the handle stop and then press. [Application]. Torque: gf 280 cm.
Buy It Now
Free Shipping
Condition: New Location: , China
Dental vacuum Forming Machine is specially designed for dental applications. Durable and user-friendly, our Vacuum Forming Machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office.
0 bids Free Shipping
Condition: New Location: Cranbury, United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle. Fully adjustable.
0 bids Free Shipping
Condition: New Location: Gresham, United States
The electric motor matches the "E"type international interfaceIt can be matched with 1:5,1:1,16:1 internal waterway handpiece. Dental LED Electric Motor Minimally invasive repair,polishing,pulp preparation hole,etc.
Buy It Now
Free Shipping
Condition: New Location: , United States
JT19 500W Dental Wet Model Trimmer Abrasive Machine Gypsum Arch Inner Disc Wheel Highlights: 1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve 2. Connect the waste-disposal tube to the unit 3. Connect the power cord, and switch on the power switch (O=off, l=on) 4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18) 5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of.
0 bids $5.11 Shipping
Condition: New Location: , China
Buy It Now
$8.00 Shipping
Condition: New Location: La Puente, United States
Product Description: ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. . ★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time. ★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists. ★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded.
0 bids Free Shipping
Condition: New Location: , United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Rotate speed: 0~50000rpm. 50000rpm brushless micromotor. Portable, foot pedal, adjustable, strong power, best quality, high-end sports car design, durable. Made of high-abrasive material, more light and handy, more beautiful.
0 bids Free Shipping
Condition: New Location: Chino, United States
Power: 370W. It can be placed under the dental laboratory bench or other places, so. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: , United States
Specification Model: ZY-260 Color: Silver Material: 304 Stainless Steel Working Medium: Steam Voltage: 110V (AC) Power: 1.2KW Frequency: 50HZ Capacity: 8L/ 2.11Gal/ 8.5Qt Volume: 0.010m³/ 0.353ft³ Design Pressure: 0.17MPa Design Temperature: 129℃/ 264.2℉ Over-pressure Self-discharge: 0.145-0.165Mpa Maximum Operating Temperature: 126-128℃/ 258.8-262.4℉ Sterilization Chamber Dimensions: 24*12cm/ 9.45*4.72in Product Size: 33*33*26cm/ 12.9*12.9*10in Package Size: 36*36*30cm/ 14.17*14.17*11.81in Net Weight: 6.5kg/ 14lbs Gross Weight: 8kg/ 17.64lbs.
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Jeannette, United States
Dental Honeycomb Porcelain Furnace Firing Trays. Honeycomb Furnace Firing Trays. -Made in the USA-. Therefore reasonable care has been taken in the preparation of such information. These materials are to be used solely under appropriate and trained individuals who understand to use full caution and full safety.
Buy It Now
Free Shipping
Condition: New Location: La Puente, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids $5.11 Shipping
Condition: New Location: , China
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Vacuum Forming Machine is specially designed for dental applications. Durable and user-friendly, our Vacuum Forming Machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office.
Buy It Now
Free Shipping
Condition: New – Open box Location: , United States
Dental Model Square Vibrator Vibration Model 130/120w Oscillator Vibrating Equip SKU: JT-51BX This is a big power, high efficiency vibrator, the unique design of heat radiation base make it always work in long time. It has two grades, weak grade, strong grade, can be changed as necessary. Before power on, put the switch in the middle part “O”, and then power on, turn on the switch (the indicator light comes on), and choose the strong grade or weak grade, finally turn on the switch two or switch one, it starts to work. Features: Voltage: 110V/60Hz+-10% Power: 120W Maximum load:<=2KG Dimension:20.5×15.5×10cm (Inner packing size) Package Including: 1x New JT-51BX Small Square Dental Vibrator --------------------------------------------------------.
0 bids Free Shipping
Condition: New Location: , United States
This injection system is composed of a heater and a hot press. The heater will make a beep sound when it finishes heating. Structure and working principle The function of the hot press is that it injects the molten material into flask.
Buy It Now
$39.63 Shipping
Condition: New Location: Chino, United States
Specification Model: ZY-260 Color: Silver Material: 304 Stainless Steel Working Medium: Steam Voltage: 110V (AC) Power: 1.2KW Frequency: 50HZ Capacity: 8L/ 2.11Gal/ 8.5Qt Volume: 0.010m³/ 0.353ft³ Design Pressure: 0.17MPa Design Temperature: 129℃/ 264.2℉ Over-pressure Self-discharge: 0.145-0.165Mpa Maximum Operating Temperature: 126-128℃/ 258.8-262.4℉ Sterilization Chamber Dimensions: 24*12cm/ 9.45*4.72in Product Size: 33*33*26cm/ 12.9*12.9*10in Package Size: 36*36*30cm/ 14.17*14.17*11.81in Net Weight: 6.5kg/ 14lbs Gross Weight: 8kg/ 17.64lbs Package Included 1* Autoclave 1* Pot Lid 1* Sterilized Inner Cylinder 1* Wing Wrench 1* English Instruction Manual.
Buy It Now
Free Shipping
Condition: New Location: , United States
All of the components installed in the central PC board concentrated. Shock,set-up, electron tubes, all of them are insulation vacuum, sealed stereotype protection. This portable dental ray machine is high frequency machine.
Buy It Now
$385.00 Shipping
Condition: New Location: , China
AX-YDA is update version of AX-YD Manual Denture Injection System, This machine is easy operation. Therefore the automatic denture injection machine is more user-friendly and produces more successful dentures than its semi-automatic counterpart.
0 bids Free Shipping
Condition: New Location: Chino, United States
USA Dental Vacuum Molding Forming Machine Vacuum Former Thermoforming 110V ??Features: 1. Heavy-duty vacuum motor provides precise downward suction 2. Features a symmetrical heating system, ensuring uniform heat distribution 3. Adjustable, rust-resistant body accommodates various materials 4. Suitable for a wide range of clinical applications 5. Non-rotating sliding frame makes operation easy and stress-free 6. Compatible with all dental thermoplastics 7. The motor of vacuum former is strategically placed below its perforated stage, which creates a direct downward suction, ensuring the utmost precision. 8. Durable and user-friendly, the machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office. ?? Application Range: 1. Decolorization.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids $10.00 Shipping
Condition: New Location: , United States
Tungsten Steel drill : D12×H30mm. Main unit 1.
Buy It Now
Free Shipping
Condition: New Location: Rancho Cucamonga, United States
O The subgingival nozzle can be rotated 360 after installation. Enable more comprehensive subgingival periodontal air polishing. Supragingival & subgingival mode Two-in-one. Woodpecker Dental Air Polisher AP-H.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: Used Location: Hudson, United States
This sale is for 3 Dispensers as shown. We own and operate a modern 60,000 SQ foot Facility in Florida and a 66,000 SQ foot facility in Georgia. The #1 Source for Everything Dental. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids Free Shipping
Condition: New Location: Chino, United States
Portable Quiet Suction Unit Vacuum Phlegm Medical Emergency Aspirator 110V 60Hz Highlights High negative pressure, large flux, low noise. Safe to Use: The machine does not produce a positive pressure to ensure that its performance is reliable, safe to use. 1000ML Water Tank: This item reliefs in less than a minute, 1000ml high capacity water tank for less refills. Portable: Small size, light weight, easy to carry, especially to adapt to a variety of emergency situations and travel needs. Package listing 1*Suction conductor 1*Storage bottle (1000mL) 2*Fuse tube 1*Air filter 1*Extension tube 1*User's manual Specification Power: 110V 60Hz The input power:≤90VA±25％ The limit negative pressure:≥ 0.07MPa Negative pressure adjustment range:0.02MPa to the limit negative pressure Pumping r.
0 bids Free Shipping
Condition: New Location: Chino, United States
Denshine Dental 5W Wireless Cordless LED Curing Light Lamp 1500mw - BLACK FDA . Dental High Fast Speed Handpiece Tubing Adapter Changer 4-H to 2-H/2-H to 4-H. Teeth Whitening Dental Bleaching System Oral Gel Kit Tooth Whitener Laser Light.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Investment Vibrator 4" Round Shaker Oscillator Lab Equipment This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: AC110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Packing list: 1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment Weight & Dimension: Dimensions: 44×35×35cm Weight of the dental trimmer: 20kg Specification: Voltage: 110V/60Hz Power: 500W Rotational Speed: 2800 rpm Attention: If there is some abnormal noise when working on Possible reason：① Axon is loosing ② Disc is not plain enough How to solve it：①Dissemble the disc⒃ with spanner，make the snap Ring tightly；② change the disc。 The machine does not work when power on Possible reason：① fuse get burnt；② motor get burnt；③ switch get wrong。 How to solve it：① change the fuse（22） which inside the socket；② change the motor ③ change the switch.
|
|
|
|