|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: , United States
Packing list: 1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment Weight & Dimension: Dimensions: 44×35×35cm Weight of the dental trimmer: 20kg Specification: Voltage: 110V/60Hz Power: 500W Rotational Speed: 2800 rpm Attention: If there is some abnormal noise when working on Possible reason：① Axon is loosing ② Disc is not plain enough How to solve it：①Dissemble the disc⒃ with spanner，make the snap Ring tightly；② change the disc。 The machine does not work when power on Possible reason：① fuse get burnt；② motor get burnt；③ switch get wrong。 How to solve it：① change the fuse（22） which inside the socket；② change the motor ③ change the switch.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids $49.90 Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: , United States
It has aobtained the national invention. Portable Dental Lab Digital Singlerow Dust Collector Vacuum Cleaner Suction Base. 1X Dental Portable Desktop Suction Base. cushions for making the suction inlet near.
Buy It Now
Free Shipping
Condition: New Location: , United States
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Fontana, United States
Portable Dental Unit Air Compressor Curing Light Ultrasonic Scales 4H AS-ZL01. 3.Built-in LED curing ligh 1 set. 1.Built-in air compressor 1 set. Weak saliva suction device 1 set. Air Flow rate:40L/min.
0 bids $215.00 Shipping
Condition: New Location: , China
It is a necessary tool for trimming plaster models. This machine is made of rust-proof all-cast aluminum. The angle can be adjusted between 0-20° which enables the users to achieve perfect trimming quality.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Weights&Dimensions Weight: 6kg Forming size:126*126mm Dimensions: 25 × 21 × 30cm Specifications Model: JT-018 Voltage: 110V/60Hz ± 10% Motor Power: 800W Heating Power: 600W What's Included? Main unit(Vacuum forming machine) x 1 1x Bag of steel grits Power cord x 1 Manual x 1.
Buy It Now
$5.00 Shipping
Condition: New Location: Chino, United States
The vibrator is mainly composed of pedestal and vibrator plate. It is also installed the knot for adjusting the intensity of the vibration. Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity.
0 bids $2.00 Shipping
Condition: New Location: , China
Battery adapter output : 5V-1A. Output : 1.8W Max. Battery adapter input : 100V-240V 0.5A Max. The main unit cannot be autoclaved. Model : TM-TD1. Or replace item for you. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
$32.70 Shipping
Condition: New Location: Chino, United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: 1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve 2. Connect the waste-disposal tube to the unit 3. Connect the power cord, and switch on the power switch (O=off, l=on) 4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18) 5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet) Specifications Voltage: 110V/60Hz±10%.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Motor Power: 800W. Vacuum Forming Machine is specially designed for dental applications. Durable and user-friendly, our Vacuum Forming Machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office.
Buy It Now
$39.63 Shipping
Condition: New Location: Chino, United States
Specification Model: ZY-260 Color: Silver Material: 304 Stainless Steel Working Medium: Steam Voltage: 110V (AC) Power: 1.2KW Frequency: 50HZ Capacity: 8L/ 2.11Gal/ 8.5Qt Volume: 0.010m³/ 0.353ft³ Design Pressure: 0.17MPa Design Temperature: 129℃/ 264.2℉ Over-pressure Self-discharge: 0.145-0.165Mpa Maximum Operating Temperature: 126-128℃/ 258.8-262.4℉ Sterilization Chamber Dimensions: 24*12cm/ 9.45*4.72in Product Size: 33*33*26cm/ 12.9*12.9*10in Package Size: 36*36*30cm/ 14.17*14.17*11.81in Net Weight: 6.5kg/ 14lbs Gross Weight: 8kg/ 17.64lbs Package Included 1* Autoclave 1* Pot Lid 1* Sterilized Inner Cylinder 1* Wing Wrench 1* English Instruction Manual.
Buy It Now
Free Shipping
Condition: New Location: , United States
Specification Model: ZY-260 Color: Silver Material: 304 Stainless Steel Working Medium: Steam Voltage: 110V (AC) Power: 1.2KW Frequency: 50HZ Capacity: 8L/ 2.11Gal/ 8.5Qt Volume: 0.010m³/ 0.353ft³ Design Pressure: 0.17MPa Design Temperature: 129℃/ 264.2℉ Over-pressure Self-discharge: 0.145-0.165Mpa Maximum Operating Temperature: 126-128℃/ 258.8-262.4℉ Sterilization Chamber Dimensions: 24*12cm/ 9.45*4.72in Product Size: 33*33*26cm/ 12.9*12.9*10in Package Size: 36*36*30cm/ 14.17*14.17*11.81in Net Weight: 6.5kg/ 14lbs Gross Weight: 8kg/ 17.64lbs.
0 bids Free Shipping
Condition: New Location: Fontana, United States
ETERFANT Dental Marathon Electric Micro Motor Polisher Micromotor N3 S05 0-35K. - Regularly sterilize the polisher to maintain hygiene and prevent infection. Ideal for use in dental laboratories and dental clinics.
0 bids Free Shipping
Condition: New Location: Chino, United States
FEATURES: 1. Professional in dipping the wax 2. There is a effictive temperature-fixed adjustment,can set the temperature+/-℃ 3. Good at heat conduction and insulation 4. Easy to operate and use 5. Melting the wax quickly and keep them in liquid status 6. Equipped digital CPU circuit and set/keep temperature needed 7. Easy to compare pre-set temperature and current temperature 8. LED display heating automatically,LED will shut off when arrving temperature set 9. Easily recognize the specially situation becase of accurate temperature sensor.
Buy It Now
Free Shipping
Condition: New Location: , United States
Quiet, powerful, and highly durable, this is the perfect tool for any dentist! The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and. state and local regulatory agencies.
0 bids Free Shipping
Condition: New Location: Chino, United States
Sealing machine ( SEAL 80) Parameters: Voltage : AC110V/50Hz, Power : 500W Sealing width : 250mm (Max.) Press Width : 10mm External dimension: 420*300*185mm. Net weight : 5 kg Feature: All plastic shell Fashionable design,safety of insulation is good Convenient for changing the knife blade External standard surgical knife blade, easy to get.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Manassas, United States
✅ DUAL-END DESIGN - These lab tools are double-sided, with a spoon on 1 side and a spatula on the other. Use the spoon to retrieve materials from containers, and use the spatula to scrape powders. -✅ COMPLETE LABORATORY SET - Everything you need to handle chemical and biological materials are in this lab spatula set of 12.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental 3 Well Analog Wax Melting Dipping Pot Heater Melter Lab Equipment Features Three Teflon coated non-stick reservoirs Illuminated On/Off switch Indicator light that goes off when unit reaches desired temperature Variable temperatures range = 60°F-270°F (30°C-130°C) Temperature controlled rapid heating Weight: 1.5KG. Voltage:110V Description: Dental Lab Equipment Analog Wax Heater Pot is a high quality wax pot and ideal for all dental applications. Its temperature controlled heating system gives you a broad temperature range of 70°F to 237°F (21°C to 112°C). In addition, this wax pot features an insulated thermoplastic housing which remains cool while wax stays hot! Electric Waxer Carving Pencil knife Machine Double Pen+6 Wax Tip Description: This dental lab electric waxer is for d.
0 bids Free Shipping
Condition: New Location: Chino, United States
Weights&Dimensions Weight: 6kg Forming size:126*126mm Dimensions: 25 × 21 × 30cm Specifications Model: JT-018 Voltage: 110V/60Hz ± 10% Motor Power: 800W Heating Power: 600W What's Included? Main unit(Vacuum forming machine) x 1 1x Bag of steel grits Power cord x 1 Manual x 1.
Buy It Now
Free Shipping
Condition: New Location: , United States
After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet). 4" Round Vibrator. Quiet, powerful, and highly durable, this is the perfect tool for any dentist!
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
0 bids $7.64 Shipping
Condition: New Location: , China
Temperature deviation is small. DON'T touch the wax pot while in use as it's very hot. Input Power:AC 110V. Heatng indicator light. Heating Container. Don't pull out the plug with wet hand. Set temperature (℃/°F) state is displayed on the display screen;you can always see,easy to oporate.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Description This forming machine is indispensable professional equipment in dental clinics and laboratories. The premium materials and exquisite craftsmanship give it excellent durability. High power and symmetrical heating elements can achieve uniform and rapid heating, ensuring precise molding effects. Its compact structure does not take up too much space wherever it is placed, and we believe it is a good helper for your work.
0 bids Free Shipping
Condition: New Location: , United States
Keep your dental lab clean and dust-free with this powerful 370W Digital Single-Row Dust Collector Vacuum Cleaner. With its compact design, it is easy to place on any work surface. Power: 370W. It can be placed under the dental laboratory bench or other places, so.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
A Good Tool Is Indispensable for Tedious Vibration Work. Our Dental Square Quartet Vibrator Is Mainly Made of Various High-quality Materials and Adopts a Painting Process to Ensure That You Can Use It for a Long Time. Good Performance(120w) Can Make Your Vibration Work More Efficient. It Will Be a Good Helper in Your Work.
0 bids $10.00 Shipping
Condition: New Location: , United States
Tungsten Steel drill : D12×H30mm.
Buy It Now
Free Shipping
Condition: New Location: Brooklyn, United States
Easy to clean: dental mold base is easy to remove and easy to clean. Different Size: 6pcs in different sizes, providing you more choice. Suitable for all kinds of people, keep the trays clean.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: , United States
Its compact structure does not take up too much space wherever it is placed, and we believe it is a good helper for your work. It is suitable for a wide range of materials and many clinical applications, and is compatible with almost all dental thermoplastics, making it an indispensable tool for any dental practice.
Buy It Now
$64.30 Shipping
Condition: New Location: , China
Decolorization braces forming and production. Compatible with all dental thermoplastics. Durable and user-friendly, the machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office.
0 bids Free Shipping
Condition: New Location: Gresham, United States
The electric motor matches the "E"type international interfaceIt can be matched with 1:5,1:1,16:1 internal waterway handpiece. Dental LED Electric Motor Minimally invasive repair,polishing,pulp preparation hole,etc.
Buy It Now
$5.00 Shipping
Condition: New Location: , China
Constant light intensity. The solidification effect is not affected by the consumption of remaining power. Portable Wireless Dental Led Curing Light Cure Machine Dental Light Curing Lamp. Features for Dental LED Curing Lamp.
Buy It Now
Free Shipping
Condition: New Location: Fontana, United States
Ergonomic design with a rotatable pylon and arm. - 1 x Rotatable Pylon(Radius of Rotation: 300 mm). Working Pressure For High Speed Hand Piece: 0.36Mpa. Working Pressure For Low Speed Hand Piece: 0.34Mpa.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Wet Model Trimmer Abrasive Machine Gypsum Arch Inner Disc Wheel 500W JT19 + Dental Lab 4" Round Vibrator Variable Speed Shaker Oscillator 100W for Dentist.
0 bids Free Shipping
Condition: New Location: Gresham, United States
The electric motor matches the "E"type international interfaceIt can be matched with 1:5,1:1,16:1 internal waterway handpiece. Dental LED Electric Motor Minimally invasive repair,polishing,pulp preparation hole,etc.
0 bids Free Shipping
Condition: New Location: , China
Type:square base. Material:stainless steel,steel,iron,aluminum.
0 bids Free Shipping
Condition: New Location: , United States
Adjustable Height: 75.5-115cm/29.72-45.28in. Wheel Type: 4 Lockable Universal Wheels. Material: SPCC. Your satis faction is our ultimate goal. Assembly Required: Yes. Other Accessories for Assembly. 1 English Installation Diagram.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle. FDA declaration Gift:1× Red Goggle Glasses. Main unit 1. Fully adjustable.
Buy It Now
$110.00 Shipping
Condition: New Location: , China
Quiet operation won’t disturb. A: No, the plastic dust vacuum tube is not included with the product. Dust Connector Size Flange 98mm 1pc;. Dust Collection Built-in port and drawer. Connector design with flange type, easily adapt to the dust collector tube.
Buy It Now
$10.00 Shipping
Condition: New Location: , United States
Speed: 3000rpm. Build to Last: This Product Is Mainly Made of High-quality Cast Iron, Glass, and Abs. Process: Polishing, High-temperature Quenching. Number of Polishing Positions: 2. 1 Polishing Machine.
Buy It Now
$27.58 Shipping
Condition: New Location: , China
The lever depressed after heating the soft film covering the plaster model. Note:This item only support 220V! Decolorization braces forming and production. Compatible with all dental thermoplastics.
Buy It Now
Free Shipping
Condition: New Location: Woodbridge, United States
A must-have for dental professionals, this lab spatula ensures precision and accuracy. CNC Precision Micro Working Beaks for Maximum Precision, Efficiency & Durability.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental electric Micromotor Motor Polishing Handpiece 35K RPM Introduction: Micro motor DENTAL Handpiece is an instrument made with motor and used for working with the turning force from the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc. Feature: 1. Portable Design-it is very convenient to use and take Installed special ball bearings for super high speed (So do not need add oil) 2.35,000 RPM's provides higher speeds, greater torque 3. Newly designed front nose.
0 bids Free Shipping
Condition: New Location: Cranbury, United States
Its secure hold ensures your full models stay in place, while its adjustable and ergonomic design allows for smooth rotations and precise detailing. Compact, portable, and built to last, it’s the perfect addition to your creative toolkit.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Press Dentistry Injection System 400W 110V 282-288 ° C. ★ the Denture Injection Unit Consists of a Heater and a Hot Press. TypeDental Lab Flexible Denture Machine. Gross Weight: 30kg. 1x Power Cord. Gross weight30kg.
0 bids Free Shipping
Condition: New Location: , United States
JT19 500W Dental Wet Model Trimmer Abrasive Machine Gypsum Arch Inner Disc Wheel Highlights: 1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve 2. Connect the waste-disposal tube to the unit 3. Connect the power cord, and switch on the power switch (O=off, l=on) 4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18) 5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of.
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
|
|
|
|