|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids $21.00 Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: , United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
In addition, this wax pot features an insulated thermoplastic housing which remains cool while wax stays hot. Indicator light which goes off when unit reaches desired temperature. Item model number SG_B00DSFJGUY_US.
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
0 bids Free Shipping
Condition: New Location: , United States
Dental Composite Gun Dispenser Applicator for Unidose / Carpules - Grey. Dental Wireless Cordless LED Cure Curing Light Lamp 2000mw Dental Tools 3 Color. Dental Slow Low Speed Handpiece Contra Angle Straight Air Motor 2/4 Hole E-Type.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
$82.65 Shipping
Condition: New Location: Chino, United States
Press Dentistry Injection System 400W 110V 282-288 ° C. ★ the Denture Injection Unit Consists of a Heater and a Hot Press. 3 the Heater Will Beep When It Is Heated. 1x Hot Press. 2 the Function of the Hot Press Is to Inject Molten Material into a Previously Prepared Flask.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg The package includes: 1X heater 1X hot press 1X picking stick 1X small top bar 1X Big Top Bar 1X Type Box 1X box wrench 1X power cord 1Xproduct brochure.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: La Puente, United States
A Good Tool Is Indispensable for Tedious Vibration Work. Our Dental Square Quartet Vibrator Is Mainly Made of Various High-quality Materials and Adopts a Painting Process to Ensure That You Can Use It for a Long Time. Good Performance(120w) Can Make Your Vibration Work More Efficient. It Will Be a Good Helper in Your Work.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
0 bids Free Shipping
Condition: New Location: Gresham, United States
And it is applied to cutting, grinding, polishing. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc.
0 bids Free Shipping
Condition: New Location: Gresham, United States
A. blue ray. Input of adapter:100V to 240V~50Hz/60Hz. The optical fiber can be autoclaved to the high temperature and pressure. Light source We will always make every attempt possible to resolve issues if we made a mistake.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
$32.70 Shipping
Condition: New Location: , United States
110V Dual-Polishing Lathe Machine Buffing Grinder for Jewelry Burnishing Casting.
0 bids Free Shipping
Condition: New Location: Chino, United States
Main unit 1.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: , United States
Main unit 1. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Model: 370028. USA warehouse. This product bears CE mark and the notified body is 0482 EC certificate No.: 6730GB410160520 Report No.: 6730FS06F.
Buy It Now
Free Shipping
Condition: New Location: , United States
It has aobtained the national invention. Portable Dental Lab Digital Singlerow Dust Collector Vacuum Cleaner Suction Base. 1X Dental Portable Desktop Suction Base. cushions for making the suction inlet near.
0 bids Free Shipping
Condition: New Location: Chino, United States
Weights&Dimensions Weight: 6kg Forming size:126*126mm Dimensions: 25 × 21 × 30cm Specifications Model: JT-018 Voltage: 110V/60Hz ± 10% Motor Power: 800W Heating Power: 600W What's Included? Main unit(Vacuum forming machine) x 1 1x Bag of steel grits Power cord x 1 Manual x 1.
Buy It Now
Free Shipping
Condition: New Location: , United States
A Good Tool Is Indispensable for Tedious Vibration Work. Our Dental Square Quartet Vibrator Is Mainly Made of Various High-quality Materials and Adopts a Painting Process to Ensure That You Can Use It for a Long Time. Good Performance(120w) Can Make Your Vibration Work More Efficient. It Will Be a Good Helper in Your Work.
0 bids Free Shipping
Condition: New Location: Chino, United States
The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
$11.57 Shipping
Condition: New Location: Monroe Township, United States
Portable Dental Turbine Unit Work For Air Compressor 3 way Syringe Handpiece 4 H. 1 X Dental Turbine Unit. connect the air surce with the fast interface conect water source with filters. connect it with high-speed handpiece, adjustable pneumatic to 0.2mpa, and adjust the conditioning cooling water to be like frost when the handpiece works.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Vacuum Forming & Molding Machine JT-18. Temporary, Permanent Base, Dental Care of the Molding and Production. Decolorization Braces Forming and Production. Durable and User-friendly, the Machine Will Withstand Years of Rigorous Use and Prove to Be an Indispensable Tool for Any Dental Office.
0 bids Free Shipping
Condition: New Location: Chino, United States
1 Adjustable Magnetic Articulator. FDA declaration The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. (Amy-China-Beijing-86-13578947868).
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental plaster Model Arch Trimmer Trimming Machine Dental Lab Equipment 2800rpm Features: This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Specification: Power Supply:110V 60Hz(US PLUG) Power Consumption:250W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg Package Including: Dental Model Arch Trimmer Machine: 1 set.
0 bids $8.00 Shipping
Condition: New Location: La Puente, United States
Product Description: ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. . ★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time. ★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists. ★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Quiet, powerful, and highly durable, this is the perfect tool for any dentist! Intended Use/DisciplineDental Laboratory. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: , United States
0 bids Free Shipping
Condition: New Location: , United States
Quiet, powerful, and highly durable, this is the perfect tool for any dentist! Intended Use/DisciplineDental Laboratory. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
$43.06 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids $4.14 Shipping
Condition: New Location: , China
Dental Lab Brushless Micromotor Electric Popular Micro polishing. 1 50K RPM handpiece. Application area: widely used in precise grinding, carving and polishing for false teeth, precious stone, jewelry, nails, mold, handicrafts and so on.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
USA Dental Vacuum Molding Forming Machine Vacuum Former Thermoforming 110V 👄Features: 1. Heavy-duty vacuum motor provides precise downward suction 2. Features a symmetrical heating system, ensuring uniform heat distribution 3. Adjustable, rust-resistant body accommodates various materials 4. Suitable for a wide range of clinical applications 5. Non-rotating sliding frame makes operation easy and stress-free 6. Compatible with all dental thermoplastics 7. The motor of vacuum former is strategically placed below its perforated stage, which creates a direct downward suction, ensuring the utmost precision. 8. Durable and user-friendly, the machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office. 👄 Application Range: 1. Decolorization.
0 bids $5.99 Shipping
Condition: New Location: , China
Capacity: 500ML. Power: 150W. Mixing shovel 1. The vacuum mixer is a bench-top structure that needs to be used with an air compressor together. The air compressor used with the vacuum mixer should have a pressure of not less than 0.6Mpa.
0 bids Free Shipping
Condition: New Location: Hebron, United States
Set of 12, with tray. Anodized blue,never fade.
Buy It Now
$19.99 Shipping
Condition: New Location: Monroe Township, United States
Quiet, powerful, and highly durable, this is the perfect tool for any dentist! HighlightsCompact Design,Unique Appearance，high reliability. Feature Creative Design，Durable Material，Beautiful Appearance.
0 bids Free Shipping
Condition: New Location: Gresham, United States
This product cooperates with the pre -installed card -type oral anesthesia to process conduction anesthesia and local. Oral Anesthesia Injector is suitable for the followingsituations. ifiltrtion anesthesia for oralcavity.
0 bids Free Shipping
Condition: New Location: Cranbury, United States
Its secure hold ensures your full models stay in place, while its adjustable and ergonomic design allows for smooth rotations and precise detailing. Compact, portable, and built to last, it’s the perfect addition to your creative toolkit.
0 bids Free Shipping
Condition: New Location: Gresham, United States
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If there is a problem, we can work together to resolve it. Let us know if our service could be better!
0 bids Free Shipping
Condition: New Location: Gresham, United States
This product cooperates with the pre -installed card -type oral anesthesia to process conduction anesthesia and local. Oral Anesthesia Injector is suitable for the followingsituations. ifiltrtion anesthesia for oralcavity.
0 bids $4.14 Shipping
Condition: New Location: , China
Battery adapter output : 5V-1A. Output : 1.8W Max. Battery adapter input : 100V-240V 0.5A Max. The main unit cannot be autoclaved. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: , United States
Sealing machine ( SEAL 80) Parameters: Voltage : AC110V/50Hz, Power : 500W Sealing width : 250mm (Max.) Press Width : 10mm External dimension: 420*300*185mm. Net weight : 5 kg Feature: All plastic shell Fashionable design,safety of insulation is good Convenient for changing the knife blade External standard surgical knife blade, easy to get.
0 bids $0.01 Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Lab Digital Single-Row Dust Collector Vacuum Cleaner 370W for Laboratory. cushions for making the suction inlet near. The suction hose is. This compact desk-top portable suction base brings a substantive.
0 bids $5.00 Shipping
Condition: New Location: , China
Material: High grade stainless steel. Size: As the picture shown.
Buy It Now
Free Shipping
Condition: New Location: La Puente, United States
A Good Tool Is Indispensable for Tedious Vibration Work. Our Dental Square Quartet Vibrator Is Mainly Made of Various High-quality Materials and Adopts a Painting Process to Ensure That You Can Use It for a Long Time. Good Performance(120w) Can Make Your Vibration Work More Efficient. It Will Be a Good Helper in Your Work.
Buy It Now
Free Shipping
Condition: New Location: , United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications Voltage: 110V/60Hz ±10% Power: 100W Dimensions: 14x15x11cm.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
|
|
|
|