|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Upgrade 35K RPM Handpiece(H73L1). 35K RPM Handpiece. Marathon N3 without Handpiece. And it is applied to cutting, grinding, polishing. The products are mainly used for dental laboratory and dental clinic.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
1.Description Dental Lab Model Arch Trimmer Trimming sides of plaster models Machine 2800rpm 2.What's Included? Dental Model Arch Trimmer Machine: 1 set 3.Features&Highlights This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. 4.Weights&Dimensions Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg 5.Specifications Power Supply:110V 60Hz(US PLUG) Power Consumption:140W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Statement (FDA, ARTG) The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation,.
0 bids Free Shipping
Condition: New Location: Chino, United States
1X New JT-51B Small Square Dental Vibrator (110V~220V). Maximum load:<=2KG. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
➤Prepping food for the grill. Specification: ➤ Material:Stainless Steel ➤ Color: Silver ➤ Size Approx. 8.6" 4.3" 0.8". Sturdy and easy to clean. Great for professional surgical, veterinary and dentistry use.
Buy It Now
Free Shipping
Condition: New Location: Fremont, United States
Model Number MTST1. Part Number MTST1. The set’s rod is made of stainless steel, and it has a powder-coated base for durability. Stainless steel resists scaling and corrosion. (L is length, the horizontal distance from left to right; W is width, the horizontal distance from front to back; H is height, the vertical distance from the lowest to highest point.).
0 bids Free Shipping
Condition: Used Location: Garden City, United States
Manufacturer: Hahn. Model: Surgical Kit. This kit is missing all 7.0 bits and spares the rest is there. Refer to pictures. Any party that unsuccessfully challenges the enforceability of this Choice of Law and Forum Selection clause shall reimburse the prevailing party for its attorney fees and costs associated with defending against the challenge of said clause.
0 bids Free Shipping
Condition: New Location: Chino, United States
★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press. 2 The function of the hot press is to inject molten material into a previously prepared flask.
Buy It Now
Free Shipping
Condition: New Location: , China
It has aobtained the national invention. cushions for making the suction inlet near. The suction hose is. 1X Dental Portable Desktop Suction Base. This compact desk-top Portable Suction Base brings a substantive revolution in polishing for skilled workers.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , United States
Dentist Dental LED Curing Light Lamp 10W Wireless Cordless Resin Cure 2000MW CE. Dental Wireless Cordless LED Cure Curing Light Lamp 2000mw for Dentist Blue USA. Dental Wireless Cordless LED Cure Curing Light Lamp 2000mw 10W Tool Resin Cure U.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Quiet, powerful, and highly durable, this is the perfect tool for any dentist! How to solve it：①Dissemble the disc⒃ with spanner，make the snap. The machine does not work when power on. Possible reason：① fuse get burnt；② motor get burnt；③ switch get wrong.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg.
0 bids Free Shipping
Condition: New Location: Chino, United States
This set includes a handy handpiece holder for easy access during procedures. With precise tools and adjustable features, you can easily achieve accurate results. Dental Lab Surveyor. Dental X-Ray Film Holder Set for XCP Type Positioning System Autoclavable.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: Voltage: Ac 110v/60hz Power: 400 Watts Heating Temperature: 282-288 ° C Pressurization Time: 7 Minutes 30 Seconds - 11 Minutes Packing Size: 40*34*57cm Gross Weight: 30kg The Package Includes: 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1xproduct Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description: Portable Dental Desktop Suction Base for Skilled Workers Laboratory Equipment This compact desk-top portable suction base brings a substantive revolution in polishing for skilled workers. It substituted the fixed suction inlet on the deskside. The bench needn’t be fixed cushions for making the suction inlet near. The suction hose is not only fixed on the deskside, but also can connect with other apparatus at any time. It has aobtained the national invention patent and practical new patent. Features: 1. This compact desk-top Portable Suction Base brings a substantive revolution in polishing for skilled workers. 2. It substituted the fixed suction inlet on the deskside. 3. The bench needn't be fixed cushions for making the suction inlet near. 4. The suction hose is not only fi.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Dental 4" Round Vibrator Laboratory Equipment Oscillator Mixing Plaster Shaker 4" Dental Round Vibrator Shaker Oscillator variable-intensity model vibrator lab Dental 4" Round Vibrator, Variable Speed Vibrator, variable-intensity model vibrator, 4" Round Lab Shaker Oscillator, Lab Shaking Vibrator, Lab mixing plaster/gypsum, pouring models, and investing Vibrator This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm .
0 bids Free Shipping
Condition: New Location: Cranbury, United States
Dental visualizer JT-10. Dental Lab Surveyor. Complete set with handpiece holder precise angle. Main unit 1.
0 bids Free Shipping
Condition: New Location: Chino, United States
Improve your workflow and accuracy with this essential tool for dental professionals. Dental visualizer JT-10. Dental Lab Surveyor. Enhance dental practice with Denshine High Speed Push Button Handpiece Dental.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Austell, United States
1.Description Dental Lab Model Arch Trimmer Trimming sides of plaster models Machine 2800rpm 2.What's Included? Dental Model Arch Trimmer Machine: 1 set 3.Features&Highlights This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. 4.Weights&Dimensions Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg 5.Specifications Power Supply:110V 60Hz(US PLUG) Power Consumption:140W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Statement (FDA, ARTG) The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation,.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description: Portable Dental Desktop Suction Base for Skilled Workers Laboratory Equipment This compact desk-top portable suction base brings a substantive revolution in polishing for skilled workers. It substituted the fixed suction inlet on the deskside. The bench needn’t be fixed cushions for making the suction inlet near. The suction hose is not only fixed on the deskside, but also can connect with other apparatus at any time. It has aobtained the national invention patent and practical new patent. Features: 1. This compact desk-top Portable Suction Base brings a substantive revolution in polishing for skilled workers. 2. It substituted the fixed suction inlet on the deskside. 3. The bench needn't be fixed cushions for making the suction inlet near. 4. The suction hose is not only fi.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
1 Plaster filter. TypeDental Lab Plaster Filter. Color: gray. Your satis faction is our ultimate goal. you should consult with the FDA's Center for Devices and Radiological Health Material: Polypropylene.
0 bids Free Shipping
Condition: New Location: , United States
This wax pot features an insulated thermoplastic housing which remains cool while wax stays hot! It can quickly heat the wax and keep in its liquid condition without changing its physical properties.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
It has aobtained the national invention. 1X Dental Portable Desktop Suction Base. cushions for making the suction inlet near. The suction hose is. This compact desk-top Portable Suction Base brings a substantive revolution in polishing for skilled workers.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids $8.99 Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
The included handpiece holder securely holds your tools, providing easy accessibility and enhancing productivity. Dental Lab Surveyor. Dental LED Lamp for Surgical Operations LCD Display Compatible with.
0 bids Free Shipping
Condition: New Location: Chino, United States
USA Denshine Dental LED Fiber Optic High Speed Handpiece E-Generator 2-Holes FDA. Teeth Whitening Dental Bleaching System Oral Gel Kit Tooth Whitener Laser Light. Denshine Dental 5W Wireless Cordless LED Curing Light Lamp 1500mw - BLACK FDA .
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications Voltage: 110V/60Hz ±10% Power: 100W Dimensions: 14x15x11cm.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
With its sturdy construction and user-friendly design, this dental surveyor is perfect for professionals looking to enhance their workflow. Dental visualizer JT-10. Dental Lab Surveyor. Complete set with handpiece holder precise angle.
Buy It Now
Free Shipping
Condition: New Location: , China
Colour: Yellow. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
$6.95 Shipping
Condition: Seller refurbished Location: New Orleans, United States
Product Features.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids $8.99 Shipping
Condition: New Location: Chino, United States
1 Plaster filter. Color: gray. Your satis faction is our ultimate goal. Material: Polypropylene. you should consult with the FDA's Center for Devices and Radiological Health.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Details Dust Cover: This tabletop dust collector base comes with a dust cover that swings up and down to effectively prevent dust from fluttering out. Filter Mesh: It comes with a filter mesh that effectively keeps large particles of debris out and extends the use of the dust collector. Application It can be used in factories, workshops, homes and other places where dust needs to be extracted. Specification Material: Plastic Packing Size: 14.5*14*13cm/5.7*5.5*5.11in Base Diameter: 13cm/5.11in Product Height: 14.5cm/5.7in Gross Weight: 0.45kg/0.99lbs Package Included 1* Desk-top Portable Suction Base.
0 bids Free Shipping
Condition: New Location: , China
Red modeling wax X 20 pcs (1 Box). Red modeling wax for prosthetic dentistry tough,no distortion ,runniness or droplet. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Product Description: ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. . ★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time. ★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists. ★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded.
0 bids Free Shipping
Condition: New Location: Chino, United States
Model: Strong210+105L. Light and comfortable hold free fatigue handpiece design. 1 Handpiece. 1 Handpiece Support. Output: DC0-32V,0.5A. Foot pedal for On/off switch. 1 User Manual(English). 1 Foot Switch.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
|
|
|
|