In 
Products   Auctions
 
Order by: 
Available to: 
Price: 
 - 
$
79.90
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including: 1*Plaster filter.
$
185.92
Buy It Now
Free Shipping
Condition: New
Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
$
185.92
Buy It Now
Free Shipping
Condition: New
Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
$
34.65
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Dental electric Micromotor Motor Polishing Handpiece 35K RPM Introduction: Micro motor DENTAL Handpiece is an instrument made with motor and used for working with the turning force from the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc. Feature: 1. Portable Design-it is very convenient to use and take Installed special ball bearings for super high speed (So do not need add oil) 2.35,000 RPM's provides higher speeds, greater torque 3. Newly designed front nose.
$
72.90
0 bids
Free Shipping
Condition: New
Location: Gresham, United States
35K R.P.M. handpiece 1 PC. SDE-37L Motor Handpiece for Dental Lab and jewelry beauty wood carving. MARATHON Handpiece High-speed 0-35,000rpm. MARATHON Motor Handpiece Instructions for use. FDA for Handpiece: 510(K) Number: K181691, Regulation Number: 872.4200, Classification Product Code: EFB, Subsequent Product Code: EGS.
$
330.99
Buy It Now
Free Shipping
Condition: New
Location: Fontana, United States
And Drug Administration and state and local regulatory agencies. Working Pressure For High Speed Hand Piece: 0.36Mpa. Working Pressure For Low Speed Hand Piece: 0.34Mpa. Start-up Pressure: 0.5Mpa. Max Pressure: 0.8Mpa.
$
75.99
Buy It Now
$4.99 Shipping
Condition: New
Location: , China
24 pits plastic plate with plastic cover for glaze. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
$
139.00
0 bids
Free Shipping
Condition: New
Location: , United States
Clip Applier. Vet Ventilator. Don't miss out on this top-of-the-line tool for dental professionals. Dental Loupes. Dental Handpieces. Dental Endo Motor. Dental Filling Material. ECG Machine.
$
30.59
0 bids
$2.00 Shipping
Condition: New
Location: , China
Battery adapter output : 5V-1A. Output : 1.8W Max. Battery adapter input : 100V-240V 0.5A Max. The main unit cannot be autoclaved. Model : TM-TD1. Or replace item for you. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
$
191.03
0 bids
Free Shipping
Condition: New
Location: Chino, United States
The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean.
$
79.45
0 bids
Free Shipping
Condition: New
Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including: 1*Plaster filter.
$
28.69
0 bids
Free Shipping
Condition: New
Location: Gresham, United States
(FDA for Handpiece : 510(K) Number: K181691, Regulation Number: 872.4200, Classification Product Code: EFB, Subsequent Product Code: EGS. It is mainly for your piece of mind and comfort.). Warmly remind.
$
170.17
Buy It Now
$20.00 Shipping
Condition: New
Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg.
$
185.92
Buy It Now
Free Shipping
Condition: New
Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
$
136.92
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Motor rotational speed : 2,800rpm. Your satis faction is our ultimate goal.
$
34.65
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Dental electric Micromotor Motor Polishing Handpiece 35K RPM Introduction: Micro motor DENTAL Handpiece is an instrument made with motor and used for working with the turning force from the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc. Feature: 1. Portable Design-it is very convenient to use and take Installed special ball bearings for super high speed (So do not need add oil) 2.35,000 RPM's provides higher speeds, greater torque 3. Newly designed front nose.
$
663.64
0 bids
Free Shipping
Condition: New
Location: Rancho Cucamonga, United States
A variety of functions are integrated, with cutting, grinding and polishing functions. Start and close through the switch, simple operation, easy to use. When the special fixture spindle is in the rotating state, the installation and removal of the grinding tool clamp can be carried out by rotating the clutch handle.
$
149.58
Buy It Now
Free Shipping
Condition: New
Location: , United States
Specification Model: ZY-260 Color: Silver Material: 304 Stainless Steel Working Medium: Steam Voltage: 110V (AC) Power: 1.2KW Frequency: 50HZ Capacity: 8L/ 2.11Gal/ 8.5Qt Volume: 0.010m³/ 0.353ft³ Design Pressure: 0.17MPa Design Temperature: 129℃/ 264.2℉ Over-pressure Self-discharge: 0.145-0.165Mpa Maximum Operating Temperature: 126-128℃/ 258.8-262.4℉ Sterilization Chamber Dimensions: 24*12cm/ 9.45*4.72in Product Size: 33*33*26cm/ 12.9*12.9*10in Package Size: 36*36*30cm/ 14.17*14.17*11.81in Net Weight: 6.5kg/ 14lbs Gross Weight: 8kg/ 17.64lbs.
$
415.93
Buy It Now
Free Shipping
Condition: New
Location: , United States
Dental Autoclave Sterilizer. CS-N18 18L ?. Autoclave Sterilizer. sterilizer,It?uses?. Preparation: open the sterilizer door. remove the Machine bottom. Temperature protection switch cap. Dental Loupes.
$
158.99
0 bids
$10.00 Shipping
Condition: New
Location: , United States
Laser Drill?Machine?Pin?System. FDA declaration .
$
9.93
0 bids
$8.00 Shipping
Condition: New
Location: , United States
1 Adjustable Magnetic Articulator. Quickly and easily mount pre-cast. natural occlusion. Rubber-lined base plate ensures secure mount. Model: 370024. model casts. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
$
337.45
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet). If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18).
$
75.23
Buy It Now
Free Shipping
Condition: New
Location: Fullerton, United States
Oiless Air Compressor Motor 1pc. High Suction(Ajust) 1pc. 3, The user should read the instructions supplied with the dental unit carefully. Dental High & Low Speed Handpiece Kit. Model:BD-402 Portable Dental Unit.
$
26.21
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
It has aobtained the national invention. 1X Dental Portable Desktop Suction Base. cushions for making the suction inlet near. The suction hose is. This compact desk-top Portable Suction Base brings a substantive revolution in polishing for skilled workers.
$
116.84
0 bids
Free Shipping
Condition: New
Location: Perth Amboy, United States
With three layers, it maximizes storage space. Plus, it features a built-in socket for charging multiple devices. This lab trolley is constructed of solid steel, making it stable, strong, and load-bearing, achieving 220lbs load-bearing capacity.
$
162.05
Buy It Now
$34.35 Shipping
Condition: New
Location: Chino, United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
$
120.00
Buy It Now
Free Shipping
Condition: New – Open box
Location: Roseville, United States
Open box, looks like new, has scratches
$
12.00
0 bids
Free Shipping
Condition: New
Location: Manassas, United States
DUAL-END DESIGN - These lab tools are double-sided, with a spoon on 1 side and a spatula on the other. Use the spoon to retrieve materials from containers, and use the spatula to scrape powders. -COMPLETE LABORATORY SET - Everything you need to handle chemical and biological materials are in this lab spatula set of 12.
$
331.28
Buy It Now
Free Shipping
Condition: New
Location: , United States
Packing list: 1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment Weight & Dimension: Dimensions: 44×35×35cm Weight of the dental trimmer: 20kg Specification: Voltage: 110V/60Hz Power: 500W Rotational Speed: 2800 rpm Attention: If there is some abnormal noise when working on Possible reason:① Axon is loosing ② Disc is not plain enough How to solve it:①Dissemble the disc⒃ with spanner,make the snap Ring tightly;② change the disc。 The machine does not work when power on Possible reason:① fuse get burnt;② motor get burnt;③ switch get wrong。 How to solve it:① change the fuse(22) which inside the socket;② change the motor ③ change the switch.
$
415.75
0 bids
$49.90 Shipping
Condition: New
Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
$
34.65
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Dental electric Micromotor Motor Polishing Handpiece 35K RPM Introduction: Micro motor DENTAL Handpiece is an instrument made with motor and used for working with the turning force from the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc. Feature: 1. Portable Design-it is very convenient to use and take Installed special ball bearings for super high speed (So do not need add oil) 2.35,000 RPM's provides higher speeds, greater torque 3. Newly designed front nose.
$
149.47
Buy It Now
$36.45 Shipping
Condition: New
Location: Chino, United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
$
136.91
0 bids
Free Shipping
Condition: New
Location: , United States
Dental plaster Model Arch Trimmer Trimming Machine Dental Lab Equipment 2800rpm Features: This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Specification: Power Supply:110V 60Hz(US PLUG) Power Consumption:250W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg Package Including: Dental Model Arch Trimmer Machine: 1 set.
$
65.61
Buy It Now
$10.48 Shipping
Condition: New
Location: , China
Is the switch button of the windpipe LED lighting lamp. Be careful not to let water enter the machine. Surface material/process: ABS plastic. Our service team is willing to solve the problem for you.
$
40.00
0 bids
Free Shipping
Condition: New
Location: Springfield Gardens, United States
Ivoclar Vivadent TeEconom Plus Dental kit. 4 X 4 gm Te Econom. (A1,A2,A3,B2). 1 X 2 gm Te Econom Etch. 1 X 6 gm Te Econom Bond.
$
26.23
Buy It Now
Free Shipping
Condition: New
Location: , United States
Details Dust Cover: This tabletop dust collector base comes with a dust cover that swings up and down to effectively prevent dust from fluttering out. Filter Mesh: It comes with a filter mesh that effectively keeps large particles of debris out and extends the use of the dust collector. Application It can be used in factories, workshops, homes and other places where dust needs to be extracted. Specification Material: Plastic Packing Size: 14.5*14*13cm/5.7*5.5*5.11in Base Diameter: 13cm/5.11in Product Height: 14.5cm/5.7in Gross Weight: 0.45kg/0.99lbs Package Included 1* Desk-top Portable Suction Base.
$
465.65
0 bids
Free Shipping
Condition: New
Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
$
157.99
0 bids
Free Shipping
Condition: New
Location: Chino, United States
This centrifugal casting machine is indispensible for the production of high quality oral restorations. Long handle tongs x1. Centrifugal Casting Machine x1. Maximum eccentric weight: 1.25 kg. This product is simple in structure, convenient operation, easy maintenance.
$
490.16
Buy It Now
Free Shipping
Condition: New
Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
$
35.63
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Dental electric Micromotor Motor Polishing Handpiece 35K RPM Introduction: Micro motor DENTAL Handpiece is an instrument made with motor and used for working with the turning force from the revolving motor up to 35000rpm. And it is applied to cutting, grinding, polishing. The use of various burs according to the material and working way are available. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc. Feature: 1. Portable Design-it is very convenient to use and take Installed special ball bearings for super high speed (So do not need add oil) 2.35,000 RPM's provides higher speeds, greater torque 3. Newly designed front nose.
$
4.74
Buy It Now
$4.99 Shipping
Condition: New
Location: , China
Material :Rubber. Color: Blue. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
$
465.65
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
$
115.91
0 bids
Free Shipping
Condition: New
Location: , United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle.
$
471.29
0 bids
$5.00 Shipping
Condition: New
Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
$
47.49
0 bids
Free Shipping
Condition: New
Location: Perth Amboy, United States
Two locking casters provide stability on uneven surfaces. The wide handle ensures a comfortable grip for easy maneuvering. A2: Maximum Weight Capacity: 220 lbs/100 kg. And weight capacity of the top Layer: 99 lbs/45 kg, the second layer: 121 lbs/55 kg.
$
158.99
0 bids
$10.00 Shipping
Condition: New
Location: , United States
Dental High Fast Speed Handpiece Tubing Adapter Changer 4-H to 2-H/2-H to 4-H. Teeth Whitening Dental Bleaching System Oral Gel Kit Tooth Whitener Laser Light. USA Denshine Dental LED Fiber Optic High Speed Handpiece E-Generator 2-Holes FDA.
$
32.99
0 bids
$4.00 Shipping
Condition: New
Location: , United States
FDA declaration The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. (Rose-China-Beijing-86-13572567868). 510(K)Number: K161892.
$
82.64
0 bids
Free Shipping
Condition: New
Location: , China
(It is mainly for your piece of mind and comfort.).
$
23.05
Buy It Now
Free Shipping
Condition: New – Open box
Location: Athens, United States
$
465.71
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
$
468.35
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
★ the Denture Injection Unit Consists of a Heater and a Hot Press. TypeDental Lab Flexible Denture Machine. Press Dentistry Injection System 400W 110V 282-288 ° C. 3 the Heater Will Beep When It Is Heated.
$
699.90
Buy It Now
Free Shipping
Condition: New
Location: Hacienda Heights, United States
This Duplicating Machine's tank is made of stainless steel, which is corrosion resistant, and does not affect the duplicating gel. Machine × 1. Parts Included. Weight: 57lbs. Amount: 5L.
$
468.35
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Press Dentistry Injection System 400W 110V 282-288 ° C. ★ the Denture Injection Unit Consists of a Heater and a Hot Press. TypeDental Lab Flexible Denture Machine. Gross Weight: 30kg. 1x Power Cord. Gross weight30kg.
$
107.34
0 bids
Free Shipping
Condition: New
Location: Chino, United States
Specification Color: Blue Material: Aluminum, Stainless Steel Process: Painting Plug Type: US Standard Voltage: 110V, 60Hz ±10% Power: 1000W Heating Power: 600W Molding Power: 800W Power Cord Length: 1.2-1.5m/3.94-4.92ft Molding Size: 110*110mm/4.33*4.33in Product Size: 25*21*30cm/9.84*8.27*11.81in Package Size: 30*25*21cm/11.81*9.84*8.27in Gross Weight: 6kg/13.28 lbs Net Weight: 6kg/13.28 lbs Package Included 1* Forming Machine Notes 1.Please note that this product does not include diaphragms. 2.Please note that after using the machine, do not forget to turn off the heating switch, otherwise, it may burn out the heater. 3.Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before o.
$
33.49
0 bids
Free Shipping
Condition: New
Location: , China
Battery adapter output : 5V-1A. Battery adapter input : 100V-240V 0.5A Max. Output : 1.8W Max. Input : 5V 1A. The main unit cannot be autoclaved. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
$
15.10
0 bids
Free Shipping
Condition: New
Location: Miami, United States
Excellent Quality Stainless Steel.
$
25.99
Buy It Now
Free Shipping
Condition: New
Location: Gresham, United States
(SDE-37L Motor Handpiece for Dental Lab and jewelry beauty wood carving. MARATHON Handpiece High-speed 0-35,000rpm. MARATHON Motor Handpiece Instructions for use. It is mainly for your piece of mind and comfort.).
$
415.75
0 bids
$49.90 Shipping
Condition: New
Location: , United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
$
184.02
Buy It Now
Free Shipping
Condition: New
Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
$
465.65
0 bids
Free Shipping
Condition: New
Location: , United States
Features: Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg The package includes: 1X heater 1X hot press 1X picking stick 1X small top bar 1X Big Top Bar 1X Type Box 1X box wrench 1X power cord 1Xproduct brochure.
1 2 3 4 5 6 7 8 9 10
 In