In 
Products   Auctions
 
Order by: 
Available to: 
Price: 
 - 
$
74.95
0 bids
Free Shipping
Condition: New
Location: San Bernardino, United States
Replaces DCI, Pelton, Marus® and similar. DCI Part PN 4421. Beaverstate Dental 125-030. Forest Dental 1100-170. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
$
191.25
Buy It Now
Free Shipping
Condition: New
Location: , United States
Rotational speed 3000rpm. 550W Dual-Lathe Polishing Machine Dental Bench Polisher Jewelry Buffing Grinder. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation.
$
457.65
Buy It Now
$8.00 Shipping
Condition: New
Location: La Puente, United States
Product Description: ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. . ★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time. ★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists. ★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded.
$
471.29
0 bids
$5.00 Shipping
Condition: New
Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
$
448.80
Buy It Now
Free Shipping
Condition: New
Location: Fullerton, United States
Sterilizer temperature:121℃. Sterilization is working. Sterilizer temperature/pressure:121℃/0.12Mpa; 134℃/0.22Mpa. Tank capacity: 18L. 18L with drying function. Connect steam exhaust pipe with the steam vent,before operation.
$
465.65
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
$
9.49
0 bids
$4.99 Shipping
Condition: New
Location: , China
Dental Magnetic Denture Articulator for Teeth. Dental Lab Full Mouth Style Articulator. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
$
143.38
Buy It Now
$27.58 Shipping
Condition: New
Location: , China
The lever depressed after heating the soft film covering the plaster model. Note:This item only support 220V! Decolorization braces forming and production. Compatible with all dental thermoplastics.
$
121.69
0 bids
Free Shipping
Condition: New
Location: , United States
Sealing machine ( SEAL 80) Parameters: Voltage : AC110V/50Hz, Power : 500W Sealing width : 250mm (Max.) Press Width : 10mm External dimension: 420*300*185mm. Net weight : 5 kg Feature: All plastic shell Fashionable design,safety of insulation is good Convenient for changing the knife blade External standard surgical knife blade, easy to get.
$
239.00
Buy It Now
Free Shipping
Condition: New
Location: Mesa, United States
Compatible with most dental air compressors, water valve and vacuum systems. Designed and Manufactured by YES Dental Parts in Arizona. Complete Remote Switch Panel Kit. (3) Wire harness. Switch type: Push button with LED backlighting.
$
460.91
Buy It Now
Free Shipping
Condition: New
Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
$
107.33
0 bids
Free Shipping
Condition: New
Location: Chino, United States
Its compact structure does not take up too much space wherever it is placed, and we believe it is a good helper for your work. It is suitable for a wide range of materials and many clinical applications, and is compatible with almost all dental thermoplastics, making it an indispensable tool for any dental practice.
$
49.86
Buy It Now
Free Shipping
Condition: New
Location: , United States
Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity. Cut off the power when finish. Wash the surface of the machine frequently to keep clean, so as to extend the service life.
$
479.00
0 bids
Free Shipping
Condition: New
Location: Chino, United States
3-way air/water syringe. 1 set. Remarks: Before operation this therapeutic device need to connect with oil free compressor. 1 main body. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
$
185.92
0 bids
Free Shipping
Condition: New
Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
$
185.92
Buy It Now
Free Shipping
Condition: New
Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
$
58.44
0 bids
$21.00 Shipping
Condition: New
Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including: 1*Plaster filter.
$
115.96
0 bids
Free Shipping
Condition: New
Location: Cranbury, United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle.
$
331.28
Buy It Now
Free Shipping
Condition: New
Location: , United States
Packing list: 1x JT-19 Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment Weight & Dimension: Dimensions: 44×35×35cm Weight of the dental trimmer: 20kg Specification: Voltage: 110V/60Hz Power: 500W Rotational Speed: 2800 rpm Attention: If there is some abnormal noise when working on Possible reason:① Axon is loosing ② Disc is not plain enough How to solve it:①Dissemble the disc⒃ with spanner,make the snap Ring tightly;② change the disc。 The machine does not work when power on Possible reason:① fuse get burnt;② motor get burnt;③ switch get wrong。 How to solve it:① change the fuse(22) which inside the socket;② change the motor ③ change the switch.
$
471.29
0 bids
$5.00 Shipping
Condition: New
Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
$
108.18
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Specification Product Name:Dental Amalgamator Models: IMIX-M3, IMIX-M6 Shell Material: Plastic Power: According to the Nameplate Motor Power: 35W Storage Conditions: -10∽40℃, Relative Humidity≤80%, No Corrosive Gas and Ventilated Places. Warranty: 1 year Package Included 1* Dental Amalgamator 4* Springs 2* Fusing core 0.5A Ф5X20 1* English Instruction 1* Warranty Card.
$
79.52
Buy It Now
Free Shipping
Condition: New
Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including: 1*Plaster filter.
$
79.45
0 bids
Free Shipping
Condition: New
Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including: 1*Plaster filter.
$
28.99
0 bids
$9.99 Shipping
Condition: New
Location: , China
We're one of the largest online dental suppliers based on many qualified manufacturers in china. Battery adapter output : 5V-1A. Output : 1.8W Max. Battery adapter input : 100V-240V 0.5A Max. The main unit cannot be autoclaved.
$
19.94
0 bids
$4.99 Shipping
Condition: New
Location: , China
You can securely mount and remove any size full model casts. 1 Pc Main unit. High-quality articulators securely holds full models and Lightweight. Get from the factory directly.
$
549.09
0 bids
Free Shipping
Condition: New
Location: , China
Rotational speed 2800rpm. Power 550W. The housing is made of extra-hard materials. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
$
496.00
Buy It Now
Free Shipping
Condition: New
Location: Fullerton, United States
Power consumption: 400W. denture box - 1. Pick a material rod - 1. Unloading a barrel - 1. Heating barrel - 1. Heating furnace - 1.
$
155.82
Buy It Now
$34.35 Shipping
Condition: New
Location: Chino, United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
$
69.31
0 bids
Free Shipping
Condition: New
Location: La Puente, United States
Specification Color: White, Black Material: Metal, Copper, Rubber Motor Type: Pure Copper Motor Surface Treatment: Painting Style: Modern Shape: Rectangular Number of Items: 1 Assembly Required: No Mount Type: Countertop Type: Us Standard Model: Jg-203a Power: 120w Voltage: 110v 60hz ±10% Current: 3a Maximum Loading Capacity: ≤2kg/4.41lbs Gears: 2 Screw Type: M6 Gross Weight: 3.92kg/8.64lbs Net Weight: 3.67kg/8.09lbs Package Size: 21*13*25cm/8.27*5.12*9.84inch Product Size: 20.7*10.5*9.4cm/8.15*4.13*3.7inch Package Included 1* Dental Square Quartet Vibrator 1* Chinese Manual .
$
185.92
0 bids
Free Shipping
Condition: New
Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
$
191.03
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
$
331.28
0 bids
Free Shipping
Condition: New
Location: , United States
JT19 500W Dental Wet Model Trimmer Abrasive Machine Gypsum Arch Inner Disc Wheel Highlights: 1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve 2. Connect the waste-disposal tube to the unit 3. Connect the power cord, and switch on the power switch (O=off, l=on) 4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18) 5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of.
$
25.99
0 bids
Free Shipping
Condition: New
Location: , United States
$
468.35
Buy It Now
Free Shipping
Condition: New
Location: La Puente, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
$
28.49
0 bids
$4.99 Shipping
Condition: New
Location: , China
Denture Articulator Japaness Precision Style. Japaness Precision Style Denture Articulator for Teeth. Dental Lab Japaness Precision Style Articulator.
$
415.75
0 bids
$49.90 Shipping
Condition: New
Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
$
79.45
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
1 Plaster filter. you should consult with the FDA's Center for Devices and Radiological Health Material: Polypropylene. Your satis faction is our ultimate goal.
$
185.92
0 bids
Free Shipping
Condition: New
Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
$
119.99
Buy It Now
Free Shipping
Condition: New
Location: Bensenville, United States
Check item specifics and photos to ensure you make the perfect choice.
$
19.50
Buy It Now
Free Shipping
Condition: New
Location: New York, United States
MDT Long Round 697 FG Diamond Burs - 5 Burs / 10 Burs / 50 Burs (Box). Quantity: 5 Burs / 10 Burs / 50 Burs (Box). Long Round 697 FG Diamond Burs. Purpose:Precise Cutting and Shaping in Deep Or Hard-To-Reach Areas During Restorative, Prosth0dontic, and Surg!cal Dental Procedures.
$
25.55
0 bids
Free Shipping
Condition: New
Location: Fort Lauderdale, United States
Material: Premium Grade Stainless Steel. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. PRECISE CANADA. CARE FOR YOUR LIFE AND HEALTH.
$
185.92
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
$
140.79
Buy It Now
Free Shipping
Condition: New
Location: Fullerton, United States
Sterilizer temperature :121 ℃. 14 Liter Autoclave. Sterilization is working. Sterilizer temperature/pressure :121℃/0.12Mpa; 134℃/0.22Mpa. 18 Liter Autoclave. 18 Liter Autoclave+Drying. Connect steam exhaust pipe with the steam vent,before operation.
$
468.35
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
$
121.69
Buy It Now
Free Shipping
Condition: New
Location: Chino, United States
Power : 500W. Fashionable design,safety of insulation is good. Sealing machine ( SEAL 80). Sealing width : 250mm (Max.). Press Width : 10mm. The sale of this item may be subject to regulation by the U.S. Food and.
$
115.92
0 bids
Free Shipping
Condition: New
Location: , United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle. Fully adjustable.
$
471.29
0 bids
$5.00 Shipping
Condition: New
Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
$
250.00
0 bids
Free Shipping
Condition: New – Open box
Location: Garden City, United States
Item Includes: MicroEtcher II. Model: MicroEtcher II. Manufacturer: Zest Dental. This unit is new/unused. New, unused. Any party that unsuccessfully challenges the enforceability of this Choice of Law and Forum Selection clause shall reimburse the prevailing party for its attorney fees and costs associated with defending against the challenge of said clause.
$
430.19
Buy It Now
$35.46 Shipping
Condition: New
Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
$
107.95
Buy It Now
Free Shipping
Condition: New
Location: Monroe Township, United States
USA Dental Vacuum Molding Forming Machine Vacuum Former Thermoforming 110V 👄Features: 1. Heavy-duty vacuum motor provides precise downward suction 2. Features a symmetrical heating system, ensuring uniform heat distribution 3. Adjustable, rust-resistant body accommodates various materials 4. Suitable for a wide range of clinical applications 5. Non-rotating sliding frame makes operation easy and stress-free 6. Compatible with all dental thermoplastics 7. The motor of vacuum former is strategically placed below its perforated stage, which creates a direct downward suction, ensuring the utmost precision. 8. Durable and user-friendly, the machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office. 👄 Application Range: 1. Decolorization.
$
12.96
0 bids
$2.00 Shipping
Condition: New
Location: , United States
9:00 AM - 5:30PM (Beijing). 510(K)Number: K161892. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. (Amy-China-Beijing-86-13578947868).
$
598.93
0 bids
Free Shipping
Condition: New
Location: , United States
This injection system is composed of a heater and a hot press. The heater will make a beep sound when it finishes heating. Structure and working principle The function of the hot press is that it injects the molten material into flask.
$
15.92
0 bids
$2.00 Shipping
Condition: New
Location: , United States
1 Adjustable Magnetic Articulator. Quickly and easily mount pre-cast. natural occlusion. Rubber-lined base plate ensures secure mount. Model: 370024. model casts. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
$
79.44
Buy It Now
Free Shipping
Condition: New
Location: , United States
1 Plaster filter. TypeDental Lab Plaster Filter. you should consult with the FDA's Center for Devices and Radiological Health Your satis faction is our ultimate goal. MPNDoes Not Apply. Highlights 1Long Service Life ✨.
$
185.92
Buy It Now
Free Shipping
Condition: New
Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
$
54.14
0 bids
Free Shipping
Condition: New
Location: , United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
$
139.00
0 bids
Free Shipping
Condition: New
Location: , United States
Main unit 1. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Model: 370028. USA warehouse. This product bears CE mark and the notified body is 0482 EC certificate No.: 6730GB410160520 Report No.: 6730FS06F.
$
169.00
0 bids
Free Shipping
Condition: New
Location: , United States
Laser Drill?Machine?Pin?System. (CICI-China-86-18328503374). FDA declaration .
$
465.65
0 bids
Free Shipping
Condition: New
Location: , United States
Features: Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg The package includes: 1X heater 1X hot press 1X picking stick 1X small top bar 1X Big Top Bar 1X Type Box 1X box wrench 1X power cord 1Xproduct brochure.
$
185.92
Buy It Now
Free Shipping
Condition: New
Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
 In