|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg.
Buy It Now
$8.00 Shipping
Condition: New Location: La Puente, United States
Product Description: ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. . ★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time. ★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists. ★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Fullerton, United States
The "FAN" button is the switch button of the host, and the "LED" button is the switch button of the wind pipe LED lighting lamp. l Three LED spotlight are built in the front end of the catheter.In addition to collecting dust, it can also be used as lighting.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
Perfect for surveying aligners, models, and appliances, it your production process, saving and enhancing accuracy. Key features include an intuitive interface for easy operation, durable construction for-lasting performance, and compatibility with advanced software.
Buy It Now
$5.00 Shipping
Condition: New Location: Chino, United States
Features: Voltage: Ac 110v/60hz Power: 400 Watts Heating Temperature: 282-288 ° C Pressurization Time: 7 Minutes 30 Seconds - 11 Minutes Packing Size: 40*34*57cm Gross Weight: 30kg The Package Includes: 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1xproduct Brochure.
Buy It Now
Free Shipping
Condition: New Location: , United States
Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity. Cut off the power when finish. Wash the surface of the machine frequently to keep clean, so as to extend the service life.
0 bids $5.50 Shipping
Condition: New Location: , China
Due to the difference in lighting and screen settings, the color of the product may be slightly different from the picture. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: , United States
Dental plaster Model Arch Trimmer Trimming Machine Dental Lab Equipment 2800rpm Features: This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Specification: Power Supply:110V 60Hz(US PLUG) Power Consumption:250W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg Package Including: Dental Model Arch Trimmer Machine: 1 set.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: , United States
Vacuum: -9.8KPa. Pressure: 17KPa. > Power: 370W.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
1 Plaster filter. you should consult with the FDA's Center for Devices and Radiological Health Your satis faction is our ultimate goal. Material: Polypropylene.
Buy It Now
Free Shipping
Condition: New Location: , China
The Dental Vacuum Dust Extractor features compact size, low noise, and high suction power. It is a portable device which is easy to operate. It can work for 4 hours continuously. This unit is for dust extraction in dental labs.
0 bids $10.00 Shipping
Condition: New Location: , United States
Main unit 1.
0 bids Free Shipping
Condition: New Location: , United States
Dental Composite Gun Dispenser Applicator for Unidose / Carpules - Grey. Dental Wireless Cordless LED Cure Curing Light Lamp 2000mw Dental Tools 3 Color. Dental Slow Low Speed Handpiece Contra Angle Straight Air Motor 2/4 Hole E-Type.
Buy It Now
Free Shipping
Condition: New – Open box Location: , United States
Upgrade 35K RPM Handpiece(H73L1). 35K RPM Handpiece. Marathon N3 without Handpiece. And it is applied to cutting, grinding, polishing. The products are mainly used for dental laboratory and dental clinic.
Buy It Now
$71.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Press Dentistry Injection System 400W 110V 282-288 ° C. ★ the Denture Injection Unit Consists of a Heater and a Hot Press. 3 the Heater Will Beep When It Is Heated. 1x Hot Press. 2 the Function of the Hot Press Is to Inject Molten Material into a Previously Prepared Flask.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Fontana, United States
ETERFANT Dental Marathon Electric Micro Motor Polisher Micromotor N3 S05 0-35K. - Regularly sterilize the polisher to maintain hygiene and prevent infection. Ideal for use in dental laboratories and dental clinics.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: , United States
Details Dust Cover: This tabletop dust collector base comes with a dust cover that swings up and down to effectively prevent dust from fluttering out. Filter Mesh: It comes with a filter mesh that effectively keeps large particles of debris out and extends the use of the dust collector. Application It can be used in factories, workshops, homes and other places where dust needs to be extracted. Specification Material: Plastic Packing Size: 14.5*14*13cm/5.7*5.5*5.11in Base Diameter: 13cm/5.11in Product Height: 14.5cm/5.7in Gross Weight: 0.45kg/0.99lbs Package Included 1* Desk-top Portable Suction Base.
0 bids $11.00 Shipping
Condition: New Location: , United States
Constant light intensity. The solidification effect is not affected by the consumption of remaining power. Dental 5W Wireless Cordless LED Curing Light Lamp 1500mw. Wireless curing light with charging.
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg.
Buy It Now
$39.63 Shipping
Condition: New Location: Chino, United States
Specification Model: ZY-260 Color: Silver Material: 304 Stainless Steel Working Medium: Steam Voltage: 110V (AC) Power: 1.2KW Frequency: 50HZ Capacity: 8L/ 2.11Gal/ 8.5Qt Volume: 0.010m³/ 0.353ft³ Design Pressure: 0.17MPa Design Temperature: 129℃/ 264.2℉ Over-pressure Self-discharge: 0.145-0.165Mpa Maximum Operating Temperature: 126-128℃/ 258.8-262.4℉ Sterilization Chamber Dimensions: 24*12cm/ 9.45*4.72in Product Size: 33*33*26cm/ 12.9*12.9*10in Package Size: 36*36*30cm/ 14.17*14.17*11.81in Net Weight: 6.5kg/ 14lbs Gross Weight: 8kg/ 17.64lbs Package Included 1* Autoclave 1* Pot Lid 1* Sterilized Inner Cylinder 1* Wing Wrench 1* English Instruction Manual.
Buy It Now
Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Power: 65W. 1 Feet Pedal. Manual stepless speed regulation. Foot on/off Switch System. Speed: 0-35000 rpm. Your satis faction is our ultimate goal. Forward/reverse can be switched arbitrarily.
0 bids Free Shipping
Condition: New Location: Secaucus, United States
This fully adjustable unit is designed to accommodate a wide range of dental restoration needs, making it ideal for disciplines like Endodontics and general Dentistry. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids Free Shipping
Condition: New Location: Gresham, United States
The electric motor matches the "E"type international interfaceIt can be matched with 1:5,1:1,16:1 internal waterway handpiece. Dental LED Electric Motor Minimally invasive repair,polishing,pulp preparation hole,etc.
Buy It Now
Free Shipping
Condition: New Location: Hacienda Heights, United States
Speed: 2800 Rpm. Size: 17.3"×13.8"×13.8".
0 bids $38.00 Shipping
Condition: New Location: Chino, United States
Polisher Polishing Machine Dental Lab Lathe Bench Buffing Grinder Jewelry 110V. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Weights&Dimensions Weight: 6kg Forming size:126*126mm Dimensions: 25 × 21 × 30cm Specifications Model: JT-018 Voltage: 110V/60Hz ± 10% Motor Power: 800W Heating Power: 600W What's Included? Main unit(Vacuum forming machine) x 1 1x Bag of steel grits Power cord x 1 Manual x 1.
0 bids Free Shipping
Condition: New – Open box Location: Scotch Plains, United States
Introducing the Agilent G7116-60015 InfinityLab Quick-Connect heat exchanger, a top-of-the-line equipment for medical and laboratory needs. This device is designed with precision and quality in mind, making it an essential tool for any healthcare, lab, or dental business. With its quick-connect feature, this heat exchanger ensures efficient and seamless transfer of heat, saving you time and effort. Its brand and model, Agilent G7116-60015, guarantee reliable and accurate results for all your experiments and tests. Invest in the Agilent G7116-60015 InfinityLab Quick-Connect heat exchanger and experience high-quality performance like never before.
0 bids Free Shipping
Condition: New Location: , United States
This injection system is composed of a heater and a hot press. The heater will make a beep sound when it finishes heating. Structure and working principle The function of the hot press is that it injects the molten material into flask.
Buy It Now
Free Shipping
Condition: New Location: , United States
Details Dust Cover: This tabletop dust collector base comes with a dust cover that swings up and down to effectively prevent dust from fluttering out. Filter Mesh: It comes with a filter mesh that effectively keeps large particles of debris out and extends the use of the dust collector. Application It can be used in factories, workshops, homes and other places where dust needs to be extracted. Specification Material: Plastic Packing Size: 14.5*14*13cm/5.7*5.5*5.11in Base Diameter: 13cm/5.11in Product Height: 14.5cm/5.7in Gross Weight: 0.45kg/0.99lbs Package Included 1* Desk-top Portable Suction Base.
Buy It Now
Free Shipping
Condition: New – Open box Location: , United States
Upgrade 35K RPM Handpiece(H73L1). 35K RPM Handpiece. Marathon N3 without Handpiece. And it is applied to cutting, grinding, polishing. The products are mainly used for dental laboratory and dental clinic.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
❤WELCOME TO ryxfebruary - Your Trusted Destination!❤❤❤.
0 bids Free Shipping
Condition: New Location: Ontario, United States
Power cable. Model STRONGdrill FN323AWS. Or replace item for you. You will be replied within 24 hours (48 hours in the weekends). EUB (under 2KG): Only for USA, Canada, and Australia.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Chino, United States
Introducing our premium Vacuum Forming Molding Machine designed exclusively for dental labs. Its advanced vacuum forming technology ensures consistent, high-quality results every. Compact and user-friendly, it your workflow and enhances productivity.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Chantilly, United States
Explore our extensive catalog, experience the difference in quality, and let us contribute to the success of your dental practice. RMH3 Dental. This is an imaginative constructure and ingenious two-in-one Multifunction Waxing Unit.
0 bids $30.00 Shipping
Condition: New Location: Chino, United States
Connect steam exhaust pipe with the steam vent ， Before operation. Sterilization tray × 3pcs ; steam exhaust pipe × 1pc. Before open the DOOR(Do not close the power switch and close the steam. SAFETY : Heating-over protection ; safety valve. ).
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Product Name：Dental Amalgamator Models: IMIX-M3, IMIX-M6 Shell Material: Plastic Power: According to the Nameplate Motor Power: 35W Storage Conditions: -10∽40℃, Relative Humidity≤80%, No Corrosive Gas and Ventilated Places. Warranty: 1 year Package Included 1* Dental Amalgamator 4* Springs 2* Fusing core 0.5A Ф5X20 1* English Instruction 1* Warranty Card.
0 bids $30.00 Shipping
Condition: New Location: , China
N3 Micromotor 1 x SHIYANG Mcomotor N3 S05. Newly designed plastic grip. Speed range 0 - 35,000 R.P.M. Easy to change chucks. Foot Pedal ON/OFF switch system. Newly designed front nose with 2 heavy duty front bearings.
0 bids Free Shipping
Condition: New Location: Chino, United States
FEATURES: 1. Professional in dipping the wax 2. There is a effictive temperature-fixed adjustment,can set the temperature+/-℃ 3. Good at heat conduction and insulation 4. Easy to operate and use 5. Melting the wax quickly and keep them in liquid status 6. Equipped digital CPU circuit and set/keep temperature needed 7. Easy to compare pre-set temperature and current temperature 8. LED display heating automatically,LED will shut off when arrving temperature set 9. Easily recognize the specially situation becase of accurate temperature sensor.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Autoclave Sterilizer. CS-N18 18L ?. Autoclave Sterilizer. sterilizer,It?uses?. Preparation: open the sterilizer door. remove the Machine bottom. Temperature protection switch cap. Dental Loupes.
0 bids Free Shipping
Condition: New Location: Chino, United States
Maximum noise intensity: -60db. Maximum vacuum: -9.8kpa. It can collect all the dusts in the air easily to protect pollution to the air. The dusct collector is located in an rectangular box. Good and simple design.
0 bids Free Shipping
Condition: New Location: Chino, United States
★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press. 2 The function of the hot press is to inject molten material into a previously prepared flask.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental visualizer JT-10. Dental Lab Surveyor. Complete set with handpiece holder precise angle. Fully adjustable.
Buy It Now
Free Shipping
Condition: New Location: , China
Buy It Now
Free Shipping
Condition: New Location: , United States
1 Plaster filter. TypeDental Lab Plaster Filter. you should consult with the FDA's Center for Devices and Radiological Health MPNDoes Not Apply. Manufacturer Warranty10 Years. Warranty5 Years.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Press Dentistry Injection System 400W 110V 282-288 ° C. ★ the Denture Injection Unit Consists of a Heater and a Hot Press. 3 the Heater Will Beep When It Is Heated. 1x Hot Press. 2 the Function of the Hot Press Is to Inject Molten Material into a Previously Prepared Flask.
|
|
|
|