|
|
Order by: |
Buy It Now
$8.00 Shipping
Condition: New Location: La Puente, United States
Product Description: ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. . ★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time. ★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists. ★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Chino, United States
Power: 500W. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet). If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18).
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids Free Shipping
Condition: New Location: Chino, United States
FEATURES: 1. Professional in dipping the wax 2. There is a effictive temperature-fixed adjustment,can set the temperature+/-℃ 3. Good at heat conduction and insulation 4. Easy to operate and use 5. Melting the wax quickly and keep them in liquid status 6. Equipped digital CPU circuit and set/keep temperature needed 7. Easy to compare pre-set temperature and current temperature 8. LED display heating automatically,LED will shut off when arrving temperature set 9. Easily recognize the specially situation becase of accurate temperature sensor.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
0 bids Free Shipping
Condition: New Location: , United States
Dental Composite Gun Dispenser Applicator for Unidose / Carpules - Grey. Dental Wireless Cordless LED Cure Curing Light Lamp 2000mw Dental Tools 3 Color. Dental Slow Low Speed Handpiece Contra Angle Straight Air Motor 2/4 Hole E-Type.
0 bids $4.99 Shipping
Condition: New Location: , China
Denture Articulator Japaness Precision Style. Japaness Precision Style Denture Articulator for Teeth. Dental Lab Japaness Precision Style Articulator.
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg.
Buy It Now
$80.00 Shipping
Condition: New Location: , China
Output Power: 300W. 1 x 300W Dental Sealing Machine. Features: easy to operate, firm sealing, cutting knife sharp, stable structure, very durable. Sealing width: 250mm (width 5-250mm sealable sterilization bags).
0 bids Free Shipping
Condition: New Location: , China
Dental Lab Grind Inner Model Arch Trimmer Laboratory Equipment Trimming Machine.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: , China
Hot Sale/Promotion. Motor power: 20W. Blending speed: 2500-4700. Let us know if our service could be better! We will always make every attempt possible to resolve issues if we made a mistake. (It happens).
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: Fullerton, United States
Dental Lab Electric Micromotor Polishing Unit + 35K rpm Motor Handpiece. Multipurpose Micromotor for dental，laboratory，jewelry，industry. Vacuum Forming Machine is specially designed for dental applications.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids $2.99 Shipping
Condition: New Location: , China
(The Tooth Dryeris used to dry the tooth surface. 1)Lay lightly during transportation,avoid strong shake. 2)Connect the AC adapter with the device properly,and insert the AC USB adapter plug to the power socket.
0 bids Free Shipping
Condition: New Location: Gresham, United States
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. FDA for Curing Light: 510(K) Number: K192233, Regulation Number: 21 CFR 872.6070, Product Code: EBZ.
0 bids Free Shipping
Condition: New Location: , United States
A Good Tool Is Indispensable for Tedious Vibration Work. Our Dental Square Quartet Vibrator Is Mainly Made of Various High-quality Materials and Adopts a Painting Process to Ensure That You Can Use It for a Long Time. Good Performance(120w) Can Make Your Vibration Work More Efficient. It Will Be a Good Helper in Your Work.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids $4.99 Shipping
Condition: New Location: , China
Dental Magnetic Denture Articulator for Teeth. Dental Lab Full Mouth Style Articulator. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids $9.05 Shipping
Condition: New Location: , China
Voice: < 70d8. Product material: ceramic bearing, aluminum alloy body. The Socket with Air Hoee:4mm. Autoclavable:135°C. Bur to be applied:FG type ISO Stnndard(1.6). Noise:≤70dB.
0 bids Free Shipping
Condition: New Location: , United States
100W Round 4" Vibrador Dental Lab Investment Vibrator Oscillator Variable Speed.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
[Best Tools]--This is a big power, high efficiency vibrator,Quiet, powerful, and highly durable, this is the perfect tool for anyone! [Superior quality] --The device is entirely made of metal.The unique design of heat radiation base make it always work in long time. [The strength is adjustable]--It has two grades, weak grade, strong grade, can be changed as necessary. [How to use]--Before power on, put the switch in the middle part , and then power on, turn on the switch (the indicator light comes on), and choose the strong grade or weak grade, finally turn on the switch two or switch one, it starts to work. [Application]--This variable-intensity model vibrator is ideal for mixing plaster gypsum, pouring models, and investing.It is good used for reducing bubbles, ensuring the flawless.
Buy It Now
Free Shipping
Condition: New Location: , United States
Power: 120W. 1x New JT-51BX Small Square Dental Vibrator. • It has two grades, weak grade, strong grade, can be changed as necessary. Your satis faction is our ultimate goal. you should consult with the FDA's Center for Devices and Radiological Health.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications Voltage: 110V/60Hz ±10% Power: 100W Dimensions: 14x15x11cm.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Power: 120W. 1X New JT-51B Small Square Dental Vibrator. you should consult with the FDA's Center for Devices and Radiological Health Your satis faction is our ultimate goal.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , China
Rotational speed 2800rpm. Power 550W. The housing is made of extra-hard materials. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids Free Shipping
Condition: New Location: Jeannette, United States
Vacuum Forming Trays. Select your quantity upon checkout. NOT the manufacturers of these vacuum forming trays. Also, can have an adhesiveness to acrylics on a variety of dental applications. Therefore reasonable care has been taken in the preparation of such information.
Buy It Now
$12.70 Shipping
Condition: New Location: Chino, United States
Technical Data Model: JT-018 Voltage: OR 110V/60Hz ± 10% Motor power: 800W, Heating tube power: 600W Dimensions: 25 × 21 × 30cm Weight: 6kg Package Includes Main unit x 1 Power cord x 1 Manual x 1 Application Range 1. Decolorization braces forming and production 2. Orthodontic appliances remain, arch molding and plywood production 3. Periodontal disease, fluoride treatment and production of the molding tray4. Temporary, permanent base, dental care of the molding and production.
Buy It Now
$1.50 Shipping
Condition: New Location: Lorton, United States
1 Pcs 75ml Crucible with Spout Pouring Lip. 1 Pcs Wooden Handle Spatula. Provides high degree of flexibility while conducting lab procedures. Suitable for a wide variety of laboratory applications. Starter sets for organic chemistry labs, distillation, separation, purification, and synthesis.
0 bids Free Shipping
Condition: New Location: Gresham, United States
And it is applied to cutting, grinding, polishing. The products are mainly used for dental laboratory and dental clinic. The use range has been expanded gradually for Jewelry, Nail, Engraving, orthopedics, Industry market, beauty wood carving,egg carving etc.
Buy It Now
Free Shipping
Condition: New Location: Mesa, United States
Compatible with most dental air compressors, water valve and vacuum systems. Designed and Manufactured by YES Dental Parts in Arizona. Complete Remote Switch Panel Kit. (3) Wire harness. Switch type: Push button with LED backlighting.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: 金水区, China
gold color Dental L/M/S 3 Size Full Mouth Plating Articulator Dental Lab Equipment Tools Use for Mechanic Copper Adjustable Articulator Features: Ingredient:stainless steel Type: Full mouth Size：Large/Medium/Small Use scope: Used for mechanic Dental Lab Adjustable Magnetic Articulator General Introduction: An articulator is a mechanical device used in dentistry to which casts of the maxillary (upper) and mandibular (lower) teeth are fixed, reproducing recorded positions of the mandible in relation to the maxilla. Dental Lab Adjustable Magnetic Articulator Application: An articulator assists in the fabrication of removable prosthodontic appliances (dentures), fixed prosthodontic restorations.
Buy It Now
Free Shipping
Condition: New Location: , United States
Specification Model: ZY-260 Color: Silver Material: 304 Stainless Steel Working Medium: Steam Voltage: 110V (AC) Power: 1.2KW Frequency: 50HZ Capacity: 8L/ 2.11Gal/ 8.5Qt Volume: 0.010m³/ 0.353ft³ Design Pressure: 0.17MPa Design Temperature: 129℃/ 264.2℉ Over-pressure Self-discharge: 0.145-0.165Mpa Maximum Operating Temperature: 126-128℃/ 258.8-262.4℉ Sterilization Chamber Dimensions: 24*12cm/ 9.45*4.72in Product Size: 33*33*26cm/ 12.9*12.9*10in Package Size: 36*36*30cm/ 14.17*14.17*11.81in Net Weight: 6.5kg/ 14lbs Gross Weight: 8kg/ 17.64lbs.
Buy It Now
Free Shipping
Condition: New Location: , United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications Voltage: 110V/60Hz ±10% Power: 100W Dimensions: 14x15x11cm.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet). 4" Round Vibrator. Quiet, powerful, and highly durable, this is the perfect tool for any dentist!
0 bids $4.99 Shipping
Condition: New Location: , China
You can securely mount and remove any size full model casts. 1 Pc Main unit. High-quality articulators securely holds full models and Lightweight. Get from the factory directly.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Vacuum Forming & Molding Machine JT-18. Temporary, Permanent Base, Dental Care of the Molding and Production. Decolorization Braces Forming and Production. Durable and User-friendly, the Machine Will Withstand Years of Rigorous Use and Prove to Be an Indispensable Tool for Any Dental Office.
Buy It Now
$34.35 Shipping
Condition: New Location: Chino, United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
Buy It Now
Free Shipping
Condition: New Location: , United States
Three angle-adjustable trays Size: 44×35×35cm. Power: 550W.
0 bids Free Shipping
Condition: New Location: , United States
Specification Model: ZY-260 Color: Silver Material: 304 Stainless Steel Working Medium: Steam Voltage: 110V (AC) Power: 1.2KW Frequency: 50HZ Capacity: 8L/ 2.11Gal/ 8.5Qt Volume: 0.010m³/ 0.353ft³ Design Pressure: 0.17MPa Design Temperature: 129℃/ 264.2℉ Over-pressure Self-discharge: 0.145-0.165Mpa Maximum Operating Temperature: 126-128℃/ 258.8-262.4℉ Sterilization Chamber Dimensions: 24*12cm/ 9.45*4.72in Product Size: 33*33*26cm/ 12.9*12.9*10in Package Size: 36*36*30cm/ 14.17*14.17*11.81in Net Weight: 6.5kg/ 14lbs Gross Weight: 8kg/ 17.64lbs.
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: La Puente, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental 3 Well Analog Wax Melting Dipping Pot Heater Melter Lab Equipment Features Three Teflon coated non-stick reservoirs Illuminated On/Off switch Indicator light that goes off when unit reaches desired temperature Variable temperatures range = 60°F-270°F (30°C-130°C) Temperature controlled rapid heating Weight: 1.5KG. Voltage:110V Description: Dental Lab Equipment Analog Wax Heater Pot is a high quality wax pot and ideal for all dental applications. Its temperature controlled heating system gives you a broad temperature range of 70°F to 237°F (21°C to 112°C). In addition, this wax pot features an insulated thermoplastic housing which remains cool while wax stays hot! Electric Waxer Carving Pencil knife Machine Double Pen+6 Wax Tip Description: This dental lab electric waxer is for d.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Power: 500w Rotational Speed: 2800 RPM. After Replacing the Disk, Make Sure to Tighten the Ring on the Platform 8 (Closest to the Outside of the Sand Tablet). Connect the Power Cord, and Switch on the Power Switch (O=off, L=on).
0 bids Free Shipping
Condition: New Location: , China
Power cable. Model STRONGdrill FN323AWS. Or replace item for you. You will be replied within 24 hours (48 hours in the weekends). Torque 8N/cm. Power 150W. EUB (under 2KG): Only for USA, Canada, and Australia.
Buy It Now
Free Shipping
Condition: New Location: , China
The electric motor matches the "E"type international interfaceIt can be matched with 1:5,1:1,16:1 internal waterway handpiece. 1:5 Fiber Optic Increasing Handpiece. Dental LED Electric Motor Minimally invasive repair,polishing,pulp preparation hole,etc.
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
|
|
|
|