|
|
Order by: |
0 bids $21.00 Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg.
0 bids Free Shipping
Condition: New Location: , United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features 1. Heavy-duty vacuum motor provides precise downward suction 2. Features a symmetrical heating system, ensuring uniform heat distribution 3. Adjustable, rust-resistant body accommodates various materials 4. Suitable for a wide range of clinical applications 5. Non-rotating sliding frame makes operation easy and stress-free 6. Compatible with all dental thermoplastics 7. The motor of vacuum former is strategically placed below its perforated stage, which creates a direct downward suction, ensuring the utmost precision. 8. Durable and user-friendly, the machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office.
Buy It Now
$20.00 Shipping
Condition: New Location: Chino, United States
Features: 1. Connect One End of the Water Tube to the Nozzle of the Wet Model Trimmer and the Other End to the Tap, Open the Valve 2. Connect the Waste-disposal Tube to the Unit 3. Connect the Power Cord, and Switch on the Power Switch (O=off, L=on) 4. When Braking, It Is Normal to Hear Clicking Before the Sand Tablet Stops. If the Sand Tablet Makes Unusually Loud Noises, Remove It, and Use the Included Hex-wrench to Adjust the Screw on the Back Cover (18) 5. to Check If You Need to Replace the Abrasive Disk, Rotate the Disk by Hand and Estimate: If the Platform Jumps More than 2mm, Change the Disk. After Replacing the Disk, Make Sure to Tighten the Ring on the Platform 8 (Closest to the Outside of the Sand Tablet) Attention: If There Is some Abnormal Noise When Working on Possible.
0 bids Free Shipping
Condition: New Location: Chino, United States
1 Adjustable Magnetic Articulator. Strong, aluminum alloy construction with nickel chromium. and protects models. Quick-release hinge allows separation of. natural occlusion. Rubber-lined base plate ensures secure mount.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
Buy It Now
Free Shipping
Condition: New Location: Mesa, United States
Compatible with most dental air compressors, water valve and vacuum systems. Designed and Manufactured by YES Dental Parts in Arizona. Complete Remote Switch Panel Kit. (3) Wire harness. Switch type: Push button with LED backlighting.
Buy It Now
Free Shipping
Condition: New Location: , United States
Details Dust Cover: This tabletop dust collector base comes with a dust cover that swings up and down to effectively prevent dust from fluttering out. Filter Mesh: It comes with a filter mesh that effectively keeps large particles of debris out and extends the use of the dust collector. Application It can be used in factories, workshops, homes and other places where dust needs to be extracted. Specification Material: Plastic Packing Size: 14.5*14*13cm/5.7*5.5*5.11in Base Diameter: 13cm/5.11in Product Height: 14.5cm/5.7in Gross Weight: 0.45kg/0.99lbs Package Included 1* Desk-top Portable Suction Base.
0 bids $5.50 Shipping
Condition: New Location: , China
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Material: Stainless Steel. Quantity: 1 set. We will resolve the problem for you asap.
0 bids $4.00 Shipping
Condition: New Location: , United States
Main?unit 1. 510(K)Number: K161892. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. (Leezoe-China-Beijing-86-15963302815).
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
1 Plaster filter. you should consult with the FDA's Center for Devices and Radiological Health Your satis faction is our ultimate goal. Color: gray.
0 bids Free Shipping
Condition: New Location: Chino, United States
The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean.
0 bids Free Shipping
Condition: New Location: Cranbury, United States
Dental Lab Tools : Ensures accuracy and efficiency in every task. - Dental Lab Processes : Optimizes workflow for increased productivity. - Professional Surveyor Tools : Tailored for the needs of dental professionals.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: Fullerton, United States
High Speed Handpiece Pipe 1pc. Low Speed Handpiece Pipe 1pc. Dental High & Low Speed Handpiece Kit 4 Hole. Portable Dental Unit with Air Compres s or. Model:BD-406 Portable Dental Unit. High speed handpiece.
0 bids Free Shipping
Condition: New Location: Chino, United States
Product Description: ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. . ★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time. ★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists. ★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded.
0 bids Free Shipping
Condition: New Location: , United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm.
0 bids Free Shipping
Condition: New Location: Chino, United States
Perfect for streamlining workflows and enhancing productivity in dental labs. - Equipped with advanced features for precise and efficient dental laboratory workflows. - Easy-to-use interface for seamless integration into dental lab processes.
0 bids Free Shipping
Condition: New Location: Chino, United States
A Good Tool Is Indispensable for Tedious Vibration Work. Our Dental Square Quartet Vibrator Is Mainly Made of Various High-quality Materials and Adopts a Painting Process to Ensure That You Can Use It for a Long Time. Good Performance(120w) Can Make Your Vibration Work More Efficient. It Will Be a Good Helper in Your Work.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
A variety of functions are integrated, with cutting, grinding and polishing functions. Start and close through the switch, simple operation, easy to use. When the special fixture spindle is in the rotating state, the installation and removal of the grinding tool clamp can be carried out by rotating the clutch handle.
0 bids Free Shipping
Condition: New Location: , United States
This injection system is composed of a heater and a hot press. The heater will make a beep sound when it finishes heating. Structure and working principle The function of the hot press is that it injects the molten material into flask.
0 bids Free Shipping
Condition: New Location: La Puente, United States
A Good Tool Is Indispensable for Tedious Vibration Work. Our Dental Square Quartet Vibrator Is Mainly Made of Various High-quality Materials and Adopts a Painting Process to Ensure That You Can Use It for a Long Time. Good Performance(120w) Can Make Your Vibration Work More Efficient. It Will Be a Good Helper in Your Work.
Buy It Now
$20.00 Shipping
Condition: New Location: Chino, United States
Features: 1. Connect One End of the Water Tube to the Nozzle of the Wet Model Trimmer and the Other End to the Tap, Open the Valve 2. Connect the Waste-disposal Tube to the Unit 3. Connect the Power Cord, and Switch on the Power Switch (O=off, L=on) 4. When Braking, It Is Normal to Hear Clicking Before the Sand Tablet Stops. If the Sand Tablet Makes Unusually Loud Noises, Remove It, and Use the Included Hex-wrench to Adjust the Screw on the Back Cover (18) 5. to Check If You Need to Replace the Abrasive Disk, Rotate the Disk by Hand and Estimate: If the Platform Jumps More than 2mm, Change the Disk. After Replacing the Disk, Make Sure to Tighten the Ring on the Platform 8 (Closest to the Outside of the Sand Tablet) Attention: If There Is some Abnormal Noise When Working on Possible.
0 bids Free Shipping
Condition: Seller refurbished Location: Menasha, United States
This W&H adec RA-24 6 Pin Handpiece Coupler is the perfect addition to your dental equipment. It is designed to work with a pneumatic/air power source and is compatible with 6 pin hoses. The model is RA-24 and it comes with a new bulb, ensuring that you have the best quality of light for your dental procedures. The brand is W&H, a trusted name in the healthcare, lab & dental industry. This handpiece coupler is ideal for use in dental handpieces and instruments. It is easy to use and provides a reliable connection for your power source. Upgrade your dental equipment with this high-quality handpiece coupler today!
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Adjust it slowly from small intensity to large intensity or gradually from large intensity to small intensity. Cut off the power when finish. Wash the surface of the machine frequently to keep clean, so as to extend the service life.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
0 bids $0.01 Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Jeannette, United States
Dental Honeycomb Porcelain Furnace Firing Trays. Honeycomb Furnace Firing Trays. -Made in the USA-. Therefore reasonable care has been taken in the preparation of such information. These materials are to be used solely under appropriate and trained individuals who understand to use full caution and full safety.
0 bids $34.35 Shipping
Condition: New Location: Monroe Township, United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg The package includes: 1X heater 1X hot press 1X picking stick 1X small top bar 1X Big Top Bar 1X Type Box 1X box wrench 1X power cord 1Xproduct brochure.
0 bids Free Shipping
Condition: New Location: , United States
Dental plaster Model Arch Trimmer Trimming Machine Dental Lab Equipment 2800rpm Features: This machine is a necessary equipment for trimming the sides of plaster models. It consists of a case, a motor,a hard alloy grinding head, a power switch and an indicator light. Specification: Power Supply:110V 60Hz(US PLUG) Power Consumption:250W Motor rotational speed:2,800rpm Dimensions:23cm×21cm×26cm (H W D) Shipping Dimensions: 28cm×25cm×28cm (H W D) Weight:9kg Package Including: Dental Model Arch Trimmer Machine: 1 set.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Items that look clean to the naked eye have a lot of bacteria. Then you will need an item that can destroy bacteria. Our portable steam autoclave uses high-temperature steam sterilization, not only is the sterilization method non-toxic and harmless, but it can also destroy 99% of bacteria for you in a short time!.
Buy It Now
Free Shipping
Condition: New Location: Fullerton, United States
Power consumption: 400W. denture box - 1. Pick a material rod - 1. Unloading a barrel - 1. Heating barrel - 1. Heating furnace - 1.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications Voltage: 110V/60Hz ±10% Power: 100W Dimensions: 14x15x11cm Statement (FDA, ARTG) The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiologic.
0 bids Free Shipping
Condition: New Location: Fort Lauderdale, United States
PRECISE CANADA. CARE FOR YOUR LIFE AND HEALTH. Material: Premium Grade Stainless Steel. Choose The Deal and Compare Prices.
0 bids Free Shipping
Condition: New Location: , United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle. Fully adjustable.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle. FDA declaration Gift:1× Red Goggle Glasses. Main unit 1. Fully adjustable.
0 bids Free Shipping
Condition: New Location: , United States
Features: The Polishing Lathe is for polishing and burnishing casting. It has the advantages of: low noise, high rotational speed, and easy operations. The machine has a safety protective device, lighting device and a vacuum pipe. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry. The advantages of the suction box are: low noise, small size and strong vacuum pipe power, and it is very easy to carry and easy to clean. Specification: Power supply voltage:110V 60HZ ±10% Power :550W rotational speed:3000rpm Dimensions:48*41*32cm Weight:10kg .
Buy It Now
Free Shipping
Condition: New Location: , United States
After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet). 4" Round Vibrator. Quiet, powerful, and highly durable, this is the perfect tool for any dentist!
Buy It Now
Free Shipping
Condition: New Location: , United States
A Good Tool Is Indispensable for Tedious Vibration Work. Our Dental Square Quartet Vibrator Is Mainly Made of Various High-quality Materials and Adopts a Painting Process to Ensure That You Can Use It for a Long Time. Good Performance(120w) Can Make Your Vibration Work More Efficient. It Will Be a Good Helper in Your Work.
0 bids Free Shipping
Condition: New Location: , United States
Features: Voltage: Ac 110v/60hz Power: 400 Watts Heating Temperature: 282-288 ° C Pressurization Time: 7 Minutes 30 Seconds - 11 Minutes Packing Size: 40*34*57cm Gross Weight: 30kg The Package Includes: 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1xproduct Brochure.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: , United States
Rotational speed 3000rpm. The Polishing Lathe is for polishing and burnishing casting. The vacuum pipe can be connected directly to a dust retraction unit for dustless operation. The motor and protective device are embedded in this machine to make it easier to carry.
0 bids $10.00 Shipping
Condition: New Location: Los Angeles, United States
Remarks: Before operation this therapeutic device need to connect with oil free compressor. Clean water bottle 600ML. 1 set. Saliva ejector. 1 set. 3-way air/water syringe. 1 set. High speed air turbine Handpiece tube. 1 set.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental 4" Round Vibrator Laboratory Equipment Oscillator Mixing Plaster Shaker 4" Dental Round Vibrator Shaker Oscillator variable-intensity model vibrator lab Dental 4" Round Vibrator, Variable Speed Vibrator, variable-intensity model vibrator, 4" Round Lab Shaker Oscillator, Lab Shaking Vibrator, Lab mixing plaster/gypsum, pouring models, and investing Vibrator This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications: Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm .
Buy It Now
Free Shipping
Condition: New Location: Fontana, United States
Ergonomic design with a rotatable pylon and arm. - 1 x Rotatable Pylon(Radius of Rotation: 300 mm). Working Pressure For High Speed Hand Piece: 0.36Mpa. Working Pressure For Low Speed Hand Piece: 0.34Mpa.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
USA Dental Vacuum Molding Forming Machine Vacuum Former Thermoforming 110V ??Features: 1. Heavy-duty vacuum motor provides precise downward suction 2. Features a symmetrical heating system, ensuring uniform heat distribution 3. Adjustable, rust-resistant body accommodates various materials 4. Suitable for a wide range of clinical applications 5. Non-rotating sliding frame makes operation easy and stress-free 6. Compatible with all dental thermoplastics 7. The motor of vacuum former is strategically placed below its perforated stage, which creates a direct downward suction, ensuring the utmost precision. 8. Durable and user-friendly, the machine will withstand years of rigorous use and prove to be an indispensable tool for any dental office. ?? Application Range: 1. Decolorization.
0 bids Free Shipping
Condition: New Location: Bohemia, United States
Dental Tartar Calculus Plaque Remover, Tooth Scraper, Dental Mirror & Scaler Set. 1 Punch Pliers, 1 IV Stoke. Always Best Quality! Professional Dental Oral Hygiene Kit 5 Tools Deep Cleaning Scaler Teeth Care Set.
Buy It Now
Free Shipping
Condition: New Location: , United States
Buy It Now
$5.00 Shipping
Condition: New Location: Chino, United States
Power : 500w. Fashionable Design,Safety of Insulation Is Good. Sealing Machine ( Seal 80). Sealing Width : 250mm (Max.). Press Width : 10mm. Your satis faction is our ultimate goal. Sealing width250mm (Max.).
0 bids Free Shipping
Condition: New Location: , United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
|
|
|
|