|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Chino, United States
BI-ZMLJM-348 12NM 3Axis Nema34 Closed Loop Stepper Motor Drive Features: HBS86H adopts the latest dedicated motor control DSP chip and vector closed-loop control technology to completely overcome the problem of open-loop stepping motor lost step, and at the same time significantly improve the high-speed performance of the motor, reduce motor heating and reduce motor vibration, improve machining speed and accuracy, and reduce Machine energy consumption. When the motor is continuously overloaded, the driver will output an alarm signal in time, which has the same reliability as the AC servo system. HBS86H is equipped with 86 series closed-loop stepping motors, which is convenient for traditional stepping system upgrades. The cost is only 50% of the AC servo system. Specification: Driver Mode.
Buy It Now
Free Shipping
Condition: New Location: , HK
Stepper motors and drivers from ENGMATE. 1 5 Axis Breakout Board + 4 EMA2-050D56 Microstep Motor Drivers. 5 Axis Breakout Board. ™ digital hybrid stepper driver is a high performance Microstep Motor Driver adopting32-bit DSP, pure sine wave subdivision technology.
Buy It Now
Free Shipping
Condition: New Location: , HK
The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
Buy It Now
Free Shipping
Condition: New Location: , HK
The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6600 Standard Driver Board is equipped with TB6600HG chip.
0 bids $3.00 Shipping
Condition: New Location: , China
Motor type: Stepper Motor. - Model Number: USB CNC 9 axis. - 12 us minimum pulse width, 50% duty cycle at higher frequencies. - Slave axes. - 8 limit switches with shift feature. - 1 x USB cable. - USB connection.
0 bids Free Shipping
Condition: New Location: Chino, United States
BI-ZMLJM-348 12NM 3Axis Nema34 Closed Loop Stepper Motor Drive Features: HBS86H adopts the latest dedicated motor control DSP chip and vector closed-loop control technology to completely overcome the problem of open-loop stepping motor lost step, and at the same time significantly improve the high-speed performance of the motor, reduce motor heating and reduce motor vibration, improve machining speed and accuracy, and reduce Machine energy consumption. When the motor is continuously overloaded, the driver will output an alarm signal in time, which has the same reliability as the AC servo system. HBS86H is equipped with 86 series closed-loop stepping motors, which is convenient for traditional stepping system upgrades. The cost is only 50% of the AC servo system. Specification: Driver Mode.
Buy It Now
Free Shipping
Condition: New Location: , United States
Nema 23 Hybrid Servo Driver And 2N. m 76mm Closed Loop Stepper Motor CNC Kit. EMB2-050D-23 is 2 phase Nema 23 series hybrid stepper servo driver. The function of position ultra-difference alarm can ensure the machine work safely.
Buy It Now
Free Shipping
Condition: New Location: , United States
The DQ860MA is an economical microstepping driver based on patented technology of Wantai Motor. It is suitable for driving 2-phase 4-phase hybrid stepping motors. 4 PCS Nema 34 Stepper Motor with Single shaft 1232oz-in holding torque.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This4 Axis TB6560 Box Professional Driver Board is equipped with TB6560AHQ chip.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
About StepperOnline. Why StepperOnline ?. As a China-based distributor, StepperOnline has developed long lasting ties with more than 50 factories. We purchasing products with huge quantity to lower the cost as possible.
0 bids $4.69 Shipping
Condition: New Location: , China
This module has no programmable function, but built in a variety of fixed operation mode, the user can quickly choose the appropriate trajectory. VARIOUS WAYS OF USE: Can be independently run as a module, can also cooperate with other systems, as a third party module to make up for the lack of motor output shaft.
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
1 x Digital Stepper Driver 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Drive. 1 x Nema 34 Stepper Motor Bipolar 1.8deg 12Nm(1699.68oz.in) 6.0A 86x86x151.5mm 4 Wires. Rated Current/phase: 6A. This CNC kit included.
Buy It Now
Free Shipping
Condition: New Location: , HK
The Latest 3rd GenerationRevolutionary &Professional TB6560 4 Axis Stepper Driver Set (TB4CD-P ). of the computer, and thenrerun the recorded G-code to make the stepper motor work without the computer any more.
Buy It Now
Free Shipping
Condition: New Location: , HK
The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
Buy It Now
Free Shipping
Condition: New Location: , HK
The Latest 3rd Generation Revolutionary & Professional TB6560 3 Axis Stepper Driver Set (TB3CD-P). of the computer, and thenrerun the recorded G-code to make the stepper motor work without the computer any more.
0 bids Free Shipping
Condition: New Location: Solon, United States
A SPECIAL SIGNAL ADAPTER WILL BE PROVIDED TO ALLOW YOU TO CONNECT THE VIDEO SIGNAL FROM THE CNC TO THE LCD. You WILL need to drill 4 new holes on the CNC enclosure, so the monitor will be mounted on the back of the front enclosure.
Buy It Now
$22.85 Shipping
Condition: New Location: Hoffman Estates, United States
2 pcs Digital Stepper Drive 1.0-5.6A 20-50VDC for Nema 17, 23, 24 Stepper Motor (KL-5056). 1pc Digital Stepper Drive 24-80VDC 2.0-6.0A for Nema 17, 23, 24 Stepper Motor (KL-8060E). 2 pcs Nema 23 381oz/in 3.5A Stepper Motor 1/4" Single Shaft (KL23H2100-35-4A).
Buy It Now
$45.00 Shipping
Condition: New Location: Vista, United States
Here is what you get: dPP Lathe CNC kit for Sherline. Dell Latitude Laptop with Windows 10 Pro setup for MACH4 operation for the Sherline CNC Mill and CNC Lathe. Requires a Sherline CNC ready Mill. Works seamlessly with the following Sherline's Mills Models.
Buy It Now
Free Shipping
Condition: New Location: , HK
The Latest 3rd GenerationRevolutionary & Professional TB6560 3 Axis Stepper Driver Set (TB3CD-P ). of the computer, and thenrerun the recorded G-code to make the stepper motor work without the computer any more.
Buy It Now
$110.00 Shipping
Condition: New Location: , China
4 pcs Nema 23 stepper motor 425 oz.in bipolar 23HS9430B Dual shaft. Nema 23 stepper motor Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
3 PCS Nema23 Stepper Motor 57BYGH627. Step Angle. 1.8 ± 5% °/ Step. Motor Length. Motor Weight. Φ 6.35 ± 0.012 mm. 1 ± 10% ohm/Phase. Number of Wires.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
4 Nema 23 600 oz in motors with 6.4inductance, featuring 8mm dual shaft. These are engineered in house for the best performance when combined with the G540. These motors also include the wiring diagram on them for simple hookup, and go operation.
Buy It Now
$18.95 Shipping
Condition: New Location: Hoffman Estates, United States
2: 1pcs Gecko G540 4 axis stepper motor driver, Current Version. 3: 3pcs NEMA23 381oz/in 3.5A Dual Shaft Stepper Motor KL23H2100-35-4B High-torque Nema 23 381 oz-in stepper motors. These are optimized for the G540 at 3.5A current.
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
2-Phase Hybrid Stepper Servo Driver CL86T. Holding Torque 12Nm. 1 xClosed Loop Stepper Driver 0-8.2A 24-80VDC for Nema 34 Stepper Motor. 1 x Nema 34 Closed Loop Stepper Motor 12.0Nm(1699.68oz.in) Encoder 1000CPR.
Buy It Now
Free Shipping
Condition: New Location: , HK
The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
Buy It Now
$26.00 Shipping
Condition: New Location: , United States
HSS60 is 2 phase nema 24 series hybrid stepper servo driver. The torque reducing is much lower than open loop stepper motor when it is at higher speed. The high speed performance and torque are enhanced in a great extent.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
Our Stepper Motors are used on small to mid-sized CNC mills & milling machines, CNC lathes, Pick-n-place machines, Laser Engravers and Laser Cutters, Vinyl Sign Cutters, CNC Plasma Cutters, and CNC Foam Cutters.
0 bids Free Shipping
Condition: New Location: Chino, United States
HBS86H is equipped with 86 series closed-loop stepping motors, which is convenient for traditional stepping system upgrades. The cost is only 50% of the AC servo system. HBS86H Nema34 Closed-loop Stepper Motor 12N.
0 bids $4.00 Shipping
Condition: New Location: , China
1 x 4-Axis TB6560 Stepper Motor Driver Kit. - Universal architecture: Supports most parallel software MACH3, KCAM4, EMC2 etc! - Adjustable drive current settings for each axis: 25%,50%,75%,100% of full current can be set for different stepper motors.
Buy It Now
Free Shipping
Condition: New Location: , HK
The Nema34 stepper motor mounting bracket can match Nema34 standard stepper motor and gear/servo stepper motor. 3pcs Nema34 Stepper Motor Mounting Bracket For DIY CNC Kit. Stepper Motor Mounting Bracket.
0 bids Free Shipping
Condition: New Location: Chino, United States
BI-ZMLJM-348 12NM 3Axis Nema34 Closed Loop Stepper Motor Drive Features: HBS86H adopts the latest dedicated motor control DSP chip and vector closed-loop control technology to completely overcome the problem of open-loop stepping motor lost step, and at the same time significantly improve the high-speed performance of the motor, reduce motor heating and reduce motor vibration, improve machining speed and accuracy, and reduce Machine energy consumption. When the motor is continuously overloaded, the driver will output an alarm signal in time, which has the same reliability as the AC servo system. HBS86H is equipped with 86 series closed-loop stepping motors, which is convenient for traditional stepping system upgrades. The cost is only 50% of the AC servo system. Specification: Driver Mode.
0 bids Free Shipping
Condition: New Location: , United States
Version: V3.0. Phase-in rectifier, low power consumption. 1 x V3 Extension Board. The extension board can be used for engraving machine or 3D printer driver. Specifications: CNC Expansion Board PWM spindle and direction pin, 4 shaft support (X, Y, Z, A - you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4).
0 bids $58.08 Shipping
Condition: New Location: 龙岗区, China
NEMA34 8.5NM Closed-loop Stepper Motor Driver Encoder 6A 2ph Hybrid Servo Kit. 1 x Nema34 8.5NM Closed-loop stepper. Stepper Motor & Driver. 1 x Stepper Driver. Servo Motor & Driver. motor with VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw.
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
1 x Digital Stepper Drive 1.8~5.6A 20-50VDC DM556T. 1 x Nema 23 Bipolar 3Nm (425oz. in) 4.2A 57x57x114mm 4 Wires Stepper Motor CNC. Holding Torque: 3.0Nm(425oz. Body Length: 113mm. Motor Type: Bipolar Stepper. ).
Buy It Now
Free Shipping
Condition: New Location: , China
The driver has the characteristics of low noise, low heat and high speed performance, and is suitable for any stepper motor below 2.0A phase current of the driver. Step accuracy: ±5% (full step, no load).
0 bids Free Shipping
Condition: New Location: Perth Amboy, United States
1 xClosed Loop Stepper Driver 0-7.0A 24-50VDC for Nema 17, 23, 24 Stepper Motor CL57T. 1x driver CL57T User Manual. 2-Phase Hybrid Stepper Servo Driver CL57T. Why StepperOnline ?. As a China-based distributor, StepperOnline has developed long lasting ties with more than 50 factories.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
4pcs Nema 34 step stepper motor 1232 oz.in bipolar 5.6A pcs Nema 34 step stepper motor 1232 oz.in bipolar 5.6A. nema 34 step stepper motor 5.6A technical data Step angle ( ° ). Lead Wire (NO.). Motor Length L(mm).
Buy It Now
Free Shipping
Condition: New Location: Rowland Heights, United States
1 PC Nema 34 stepper motor with 1232oz-in for Single sha ft, D-cut flat shaft. 1, Stepper Motor. Step Angle: 1.8 degree. Part No.: WT86 STH118-6004A single shaft. Number of wire leads: 4. Length: 116.
Buy It Now
Free Shipping
Condition: New Location: , HK
All the 2 or 4 phase Nema17, Nema23, Nema24 stepper motors with current range of 0.2A~5.0A work perfectly with this TB6600HG Stepper Driver. Both of the standard version and professional version are compatible with theMach2, Mach3(Default Software), LinuxCNC(EMC2), KCAM4 CNC Software, etc.
Buy It Now
$62.00 Shipping
Condition: New Location: , China
1 pc Nema 23 stepper motor with 425 oz.in, 3A,4 leads 23HS9430. Part No.: 23HS9430. Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping
Condition: New Location: , HK
The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
Buy It Now
$3.00 Shipping
Condition: New Location: , China
Output torque: 12Nm. Output shaft mode: single output shaft. Outlet wire: two-phase four-wire (red line A +, green line A -, yellow line B +, blue line B -). The driver is AC and DC powered, the working range is AC18V-60V, DC24V-80V.
Buy It Now
Free Shipping
Condition: New Location: , United States
3 pc Nema 23 stepper motor with 4.2A, 4 leads, 435 oz.in, bipolar 23HS9442（57STH115-4204A）. Nema 23 stepper motor Low price also get the good products. Application: Our Stepper Motors are used on small to mid-sized CNC mills or milling machines, CNC lathes, Pick-n-place machines, Laser Engravers and Laser Cutters, Vinyl Sign Cutters, CNC Plasma Cutters, and CNC Foam Cutters.
0 bids $34.50 Shipping
Condition: New Location: 龙岗区, China
Package: 1. stepper motor LC57H3100 2. stepper drive LCDA357H 3. 3M Encoder cable& Power Cable If you need extender power cable and encoder cable, you can pay the extra payment on this link $5 for each extender 1M encoder cable and 1M power cable Specifications Phase：3 Holding torque：3NM Phase current：4A Motor Length:100+22mm rotational inertia:0.7 g.m2 Weight:1.8kg Encoder ppr:1000 LCDA357H Drive functional characteristics Voltage range: 18~50 VDC maximum peak current: 7A Segmentation scope: 200 ~ 51200ppr Signal input: difference/single-ended, pulse/direction Optical isolation signal inputting, strong anti-jamming capability Impulse response frequency: 200 KHZ.
Buy It Now
Free Shipping
Condition: New Location: Rowland Heights, United States
1 PC Nema 34 stepper motor with 1700oz-in for Single sha ft . 1, Stepper Motor. Step Angle: 1.8 degree. Part No.: 85BYGH450E-060-120 single shaft. Number of wire leads: 4. Length: 126. Rotor inertia: 2900.
0 bids Free Shipping
Condition: New Location: Chino, United States
HBS86H is equipped with 86 series closed-loop stepping motors, which is convenient for traditional stepping system upgrades. The cost is only 50% of the AC servo system. Your satis faction is our ultimate goal.
0 bids Free Shipping
Condition: New Location: , China
5, CP +, CP -: step pulse input (the rising edge of the effective, duration of >10 S). 4, fine points: 1/8, 1/2 (the whole step is 1.8 degrees). 3, drive mode: full bridge drive. 2, phase current: the current module can be adjusted (0~5A).
Buy It Now
Free Shipping
Condition: New Location: , United States
The Nema23 stepper motor mounting bracket can match Nema23 standard stepper motor and gear/servo stepper motor. 3pcs Nema23 Stepper Motor Mounting Bracket For DIY CNC Kit. Stepper Motor Mounting Bracket.
0 bids Free Shipping
Condition: New Location: Chino, United States
3 Axis 12Nm Nema 34 Closed Loop Stepper Motor Servo Driver Kit for CNC Engraving Specification: Driver Model: HBS86H Voltage: AC20-80V/DC24-100V Phase current: 8A/Pha (peak current) Subdivision: 2-256 subdivision Maximum 51200 steps / lap Processor: 32-bit DSP digital Pulse voltage: 5V-24V signal compatible Response frequency: up to 200KHz Pulse mode: single pulse (default) double pulse (software adjustable) Cooling Method: fan cooling Motor Model: 86HBS120 Phase Current: 5.6A/Pha Torque: 12N.m Shaft Diameter: 14mm Shaft Length: 40mm Step Angle:1.8° Step Angle accuracy: ±5% Surface Temperature: 80℃ or less (rated current) Motor Line: 3m Encoder Line: 3m Features: HBS86H adopts the latest dedicated motor control DSP chip.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
Spindle cable kit including an HY H17 spindle connector for you to assemble your spindle cable minus the solder. This video covers the HY H17 connectors I carry. NEW HY H17 Connectors Made To Fit 16/4 Double Shielded Spindle Cable.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Box Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: , United States
The Nema23 stepper motor mounting bracket can match Nema23 standard stepper motor and gear/servo stepper motor. 3pcs Nema23 Stepper Motor Mounting Bracket For DIY CNC Kit. Stepper Motor Mounting Bracket.
Buy It Now
Free Shipping
Condition: New Location: , United States
3 pc Stepper motor driver High Perfermance Stepper Driver DM860A Up to7.8A, 24-80VDC With Fan. Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
$20.00 Shipping
Condition: New Location: , China
Nema23 2N. HSS57 2-Phase Hybrid Stepper Servo Driver. HSS57 is 2 phase nema 23 series hybrid stepper servo driver. The torque reducing is much lower than open loop stepper motor when it is at higher speed.
Buy It Now
$45.00 Shipping
Condition: New Location: , China
The software is USBCNC,not mach3,pls note this. 4 Axis USBCNC Nema23 Stepper motor 270oz-in 3A 76mm+TB6560 Driver board CNC Kit. 4 Axis Nema23 Stepper motor 270oz-in 3A 76mm+TB6560 Driver board USBCNC Kit.
Buy It Now
$15.00 Shipping
Condition: New Location: Hoffman Estates, United States
4 pcs Digital Stepper Motor Driver 24-50VDC 1.5A-4.2A for for Nema 17, 23, 34 Stepper Motor (KL-5042E). 4 pcs Nema 23 282oz/in 3A Stepper Motor 1/4" Dual shaft (KL23H276-30-8B). 282 oz In. Hybrid Motor.
0 bids $36.00 Shipping
Condition: New Location: , China
Nema34 stepper motor. Application: Our Stepper Motors are used on small to mid-sized CNC mills or milling machines, CNC lathes, Pick-n-place machines,Laser Engravers and Laser Cutters, Vinyl Sign Cutters, CNC Plasma Cutters, and CNC Foam Cutters.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6600 Set Professional Driver Board is equipped with TB6600HG chip.
Buy It Now
Free Shipping
Condition: New Location: , HK
This function is widely applied in RBI machine, Conveyor etc. EMA232-7630S4 Nema23 Stepper Motor. Stepper motors and drivers from ENGMATE. ™ 3 Axis Kit for CNC DIY. 5 Axis Professional Breakout Board.
|
|
|
|