|
|
Order by: |
0 bids $358.68 Shipping
Condition: New Location: 龙岗区, China
1.2KW ER11 Spindle Motor Water Cooled 60000rpm & 1.5KW VFD inverter Bracket & Water Pump/Pipe CNC Kit Use Caution : (1) must match the drive spindle chosen correctly according to the electric spindle nameplate good debugging power, voltage and frequency. (2) Set the frequency converter should be set command channel, and then set the display channel, and finally set the parameters. When setting parameters, be sure that the reference frequency, the frequency of the three highest rated frequency and consistency. (3) The spindle is generally clockwise in the wrong direction, the drive can change settings or swap any two rotating wire the inverter output UVW terminal on.
Buy It Now
$8.00 Shipping
Condition: New Location: , China
1 x HTD3M 72 Tooth Pulley. 1 x HTD3M 18 Tooth Pulley. 1 x HTD3M Loop Timing Belt. Specification of 72T timing pulleys Specification of 18T timing pulleys Belt Width: 15mm. Tooth pitch: 3mm. Belt Section: 3M.
0 bids $43.42 Shipping
Condition: Neu Location: , China
We have a lot of products and only show a small number of products on the website.
0 bids $225.99 Shipping
Condition: New Location: , China
Made of high quality silicon steel, the bearing is made of German technology, which is more torque than the motor in the industry, the performance is more stable, the noise is lower, and the service life is longer.
0 bids $26.91 Shipping
Condition: Neu Location: , China
0 bids $4.00 Shipping
Condition: New Location: , China
Buy It Now
Free Shipping
Condition: New Location: , China
We are various industrial automation products supplier.
0 bids $58.37 Shipping
Condition: Neu Location: , China
0 bids $250.00 Shipping
Condition: New Location: 龙岗区, China
3 Axis CNC Closed-loop Nema23 428oz-in Stepper Motor Drive Kit with 3pcs Power Supply and 3 Axis Controller CNC Router kit Packing list: 3pcs Nema23 3Nm Stepper Motor+Drive kit HBS860H+57HBS30 with 3M encoder cable 3pcs Switching power supply 200w 36v S-200-36 1pc 3 axis CNC controller TC5530.
0 bids Free Shipping
Condition: New Location: , China
The function of AC servo motor driver. Impulse frequency. The length of the cable is 3m. 1 3M Encoder Cable. 1 3M Power Cable. Rotor inertia (kg.m2) 2.45 10-4 3.4 10. 1 kit Motor+ Drive. Air cooled (heat transfer film, the strong cold wind fan).
0 bids $250.00 Shipping
Condition: New Location: 龙岗区, China
Stepper Motor. VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw, linear guide. The function of AC servo motor driver The input power Single phase or three phase AC380V -15~+10%50/60Hz.
0 bids Free Shipping
Condition: New Location: , China
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Buy It Now
$6.48 Shipping
Condition: New Location: , China
About the 'Custom Duty': Our price don't include any 'Custom Duty'. But we won't afford any 'Custom Duty'. Condition: NEW.
0 bids Free Shipping
Condition: New Location: , HK
Hope to understand. We will indicate the new and old condition of the product on the product title. As long as you want, we will reply to you as soon as possible. Product View.
0 bids Free Shipping
Condition: New Location: , China
After you place an order, we can help you to get the detailed information of your item. All products have to pass strict inspection before they go out. Neither the hardware nor the software, we must make sure that all products could work well.
0 bids Free Shipping
Condition: New Location: , HK
Brand Delta MPN ECMA-C20604SS Model ECMA-C20604SS UPC Does not apply .
0 bids $48.60 Shipping
Condition: Neu Location: , China
0 bids Free Shipping
Condition: New Location: , China
The function of AC servo motor driver. Impulse frequency. The length of the cable is 3m. 1 3M Encoder Cable. 1 3M Power Cable. Rotor inertia (kg.m2) 2.45 10-4 3.4 10. 1 kit Motor+ Drive. Air cooled (heat transfer film, the strong cold wind fan).
Buy It Now
$39.99 Shipping
Condition: New Location: , China
.2KW Air Cooled Square Spindle Motor ER20 For CNC Engraving Milling Machine 220V. Speed: 10 ~ 24000rpm. Power: 2.2KW. Collet size: ER20-A. Runout off: ≤ 0.01mm. Cooling: air-cooled. Frequency: 0 ~ 400Hz.
0 bids $137.93 Shipping
Condition: Neu Location: , China
0 bids $19.99 Shipping
Condition: New Location: , China
Rate (item arrived). United Kingdom. United States.
0 bids $114.74 Shipping
Condition: Neu Location: , China
We hope you.
0 bids Free Shipping
Condition: New Location: , China
Power: 500W. Motor power: 50W ~ 500W. Spindle radial runout has high accuracy of 0.01-0.03. Adopt the pulse width technology to make the speed more stable and the strength is large at low speed. - 1 x Spindle.
0 bids $8.50 Shipping
Condition: New Location: , China
0 bids Free Shipping
Condition: New Location: , China
Power: 500W. Motor power: 50W ~ 500W. Spindle radial runout has high accuracy of 0.01-0.03. Adopt the pulse width technology to make the speed more stable and the strength is large at low speed. - 1 x Spindle.
Buy It Now
Free Shipping
Condition: New Location: , China
Condition:New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Brand:Unbranded Type:CNC KIT Offline Control Model:DIY UPC:Does not apply MPN:2023226598989 Controller Platform:Linux
Buy It Now
$29.00 Shipping
Condition: New Location: , China
Nema 11 stepper motor. This item includes.
Buy It Now
$58.00 Shipping
Condition: New Location: , China
Stepper motor: NEMA17 42HS48mm stepper motor. Screw: T8 nut, lead 4mm.
0 bids $5.00 Shipping
Condition: New Location: , China
Model: SKT SKT21 KIT450. Type: Protective Film. 1 xProtective Film. and all the accessories or gifts.
0 bids Free Shipping
Condition: New Location: , China
The function of AC servo motor driver. Impulse frequency. The length of the cable is 3m. 1 3M Encoder Cable. 1 3M Power Cable. Rotor inertia (kg.m2) 2.45 10-4 3.4 10. 1 kit Motor+ Drive. Air cooled (heat transfer film, the strong cold wind fan).
Buy It Now
$8.00 Shipping
Condition: New Location: , China
It is suitable for serial communication encoders, with excellent system performance and high reliability. And it is also widely used in all kinds of general automation machinery. - Compatible with 17-bit/23-bit, single-turn/multi-turn serial communication encoders, with high positioning accuracy and good servo axis rigidity.
0 bids $99.41 Shipping
Condition: Neu Location: , China
We have a lot of products and only show a small number of products on the website.
0 bids Free Shipping
Condition: New Location: , China
The function of AC servo motor driver. Impulse frequency. The length of the cable is 3m. 1 3M Encoder Cable. 1 3M Power Cable. Rotor inertia (kg.m2) 2.45 10-4 3.4 10. 1 kit Motor+ Drive. Air cooled (heat transfer film, the strong cold wind fan).
0 bids $54.86 Shipping
Condition: Neu Location: , China
We have a lot of products and only show a small number of products on the website.
0 bids $4.00 Shipping
Condition: New Location: , China
0 bids $4.00 Shipping
Condition: New Location: , China
0 bids $42.66 Shipping
Condition: Neu Location: , China
Wir haben viele Produkte und zeigen nur eine kleine Anzahl von Produkten auf der Website. Wir geben Ihnen den besten Preis. Wenn es nicht gut funktioniert oder. We’ll promptly reply you.
Buy It Now
Free Shipping
Condition: New Location: , China
Choose us choose success. We can work together to resolve any dispute. Best quality version with 1 years free warranty.
Buy It Now
$68.00 Shipping
Condition: New Location: , China
Motors: NEMA23 Stepper Motors (X, Y & Z). 4 x Nema23 Stepper Motors.
0 bids $394.97 Shipping
Condition: Neu Location: , China
We have a lot of products and only show a small number of products on the website.
Buy It Now
$299.99 Shipping
Condition: New Location: , China
BT30 ER25 tool holder, easy change, high speed, suitable for CNC precision parts machining. Tool holder: BT30. Power: 9KW. 1x 9KW VFD Inverter. 1x 9KW Air cooled ATC Spindle Motor. Air Cooled ATC Spindle Motor.
0 bids $35.72 Shipping
Condition: Neu Location: , China
We will respond to you very promptly.
0 bids Free Shipping
Condition: New Location: , China
The function of AC servo motor driver. Impulse frequency. The length of the cable is 3m. 1 3M Encoder Cable. 1 3M Power Cable. Rotor inertia (kg.m2) 2.45 10-4 3.4 10. 1 kit Motor+ Drive. Air cooled (heat transfer film, the strong cold wind fan).
0 bids $6.99 Shipping
Condition: New Location: , China
Universal steel knife sleeve BT40 compatible for Haas CNC machine tool accessories bt40 non-plastic wear-resistant long life.
0 bids $48.74 Shipping
Condition: Neu Location: , China
We have a lot of products and only show a small number of products on the website.
Buy It Now
$215.00 Shipping
Condition: New Location: , China
Stepper motor driver DM860HA. Holding torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. 4 pcs Nema 34 stepper motor 1600 oz.in bipolar,Dual Shaft.
0 bids $25.47 Shipping
Condition: New Location: , China
4-5V when PUL-HIGH, 0-0.5V when PUL-LOW. Series connect resistors for current-limiting when +12V or +24V used. Pulse input frequency. Reduced motor heating and more efficient. Smooth motion and super-low motor noise.
0 bids $110.00 Shipping
Condition: New Location: , China
Part 3: 2 Phase Hybird Stepper Motor 7.2A Driver. Part 2: 6 Axis CNC Machine MPG Pendant DDMPG-31. Axis: up to 6 axis. MPG port for our MPG with digital display. Many other MPGs also supported;. Jog function for each axis (continuous, step, defined distance;. ).
Buy It Now
$33.00 Shipping
Condition: New Location: , China
1pc Nema 23 stepper motor with single shaft,425 oz.in 23HS9430. Nema 23 stepper motor. Step angle ( ° ). Lead Wire (NO.). Motor Length L(mm). Motor Weight (kg). (lily at longs-motor。 com ). Rotor Inertia.
0 bids Free Shipping
Condition: New Location: , China
Parameter: SFU1605-3 ball screw nut shaft diameter: 16mm(0.63"), Lead: 5mm(0.2"), Aperture: 5mm(0.2"), Single nut size: 48 x 40 x 42mm/1.89 x 1.57 x 1.65 inch (L*W*H).Material: The ball slider is made of bearing steel, which has strong rigidity, wear resistance, and high load-bearing capacity.Function: The ball screw kit can convert rotational motion into linear motion, or convert linear motion into rotational motion. It has the advantages of small dynamic moment, high dynamic and static stiffness, high and accurate positioning, low friction, low operating noise, and long service life.Application: Suitable for machining centers, CNC, semiconductor manufacturing equipment, machine tools, mechanical equipment, and transmission equipment.Package Includes: 1 set ball screw linear rail nut.
Buy It Now
$1.99 Shipping
Condition: New Location: , China
Pulse input frequency. Reduced motor heating and more efficient. Smooth motion and super-low motor noise. High torque at starting and low speed, high stiffness at standstill. Lower cost. Warranty: 3-24 months warranty is provided to our products.
0 bids $10.00 Shipping
Condition: New Location: Chino, United States
Therefore, it is very wear-resistant. This item is made of high-quality and hard aluminum material, which is more durable and lasts longer. It is artificially and naturally treated to resist wear and tear.
Buy It Now
$2.33 Shipping
Condition: Neu Location: , China
1 T8 Schraube (Länge 470 mm). 1 Elastische Kupplung. Erweitern Sie Ihre CNC-Y-Achse 3018 von 290 mm auf 450 mm, erhalten Sie eine Grundfläche von 320 x 450 mm und eine Arbeitsfläche von 320 x 370 mm.
Buy It Now
$29.00 Shipping
Condition: New Location: , China
Load regulation:load from 0 to 100%. Tolerance:includes set up tolerance,line regulation and load regulation.
Buy It Now
$39.99 Shipping
Condition: New Location: , China
.2KW Air Cooled Square Spindle Motor ER20 For CNC Engraving Milling Machine 220V. Speed: 10 ~ 24000rpm. Power: 2.2KW. Collet size: ER20-A. Runout off: ≤ 0.01mm. Cooling: air-cooled. Frequency: 0 ~ 400Hz.
0 bids $7.00 Shipping
Condition: New Location: , China
Buy It Now
Free Shipping
Condition: New Location: , China
1 x HTD5M 60 Tooth Pulley. 1 x HTD5M 12 Tooth Pulley. 1 x HTD5M Loop Timing Belt. 60T：A=103mm C=you can choose D=20.5 mm E=16mm G=M5. Specification of 60T timing pulleys 12T：A=21mm C=you can choose D=19mm E=16mm G=M4.
Buy It Now
$8.00 Shipping
Condition: New Location: , China
80T：A=136mm B=50mm C=you can choose D=25 mm E=11mm G=M5. Specification of 80T timing pulleys 16T：A=34mm B=18mm C=you can choose D=25mm E=11mm G=M5. Specification of 16T timing pulleys (Ratio: 1：5).
0 bids $263.06 Shipping
Condition: Neu Location: , China
We have a lot of products and only show a small number of products on the website.
0 bids $376.54 Shipping
Condition: Neu Location: , China
|
|
|
|