|
|
Order by: |
0 bids Free Shipping
Condition: New Location: Chino, United States
BI-ZMLJM-348 12NM 3Axis Nema34 Closed Loop Stepper Motor Drive Features: HBS86H adopts the latest dedicated motor control DSP chip and vector closed-loop control technology to completely overcome the problem of open-loop stepping motor lost step, and at the same time significantly improve the high-speed performance of the motor, reduce motor heating and reduce motor vibration, improve machining speed and accuracy, and reduce Machine energy consumption. When the motor is continuously overloaded, the driver will output an alarm signal in time, which has the same reliability as the AC servo system. HBS86H is equipped with 86 series closed-loop stepping motors, which is convenient for traditional stepping system upgrades. The cost is only 50% of the AC servo system. Specification: Driver Mode.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
3 pc Nema 34 stepper motor 965oz. in,bipolar 34HS9456. Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
$40.00 Shipping
Condition: New Location: , United States
Part No.: WT 57STH115-0304B(57BYGH115-003B) dual shafts. 4.0A phase current. Hording torque when DQ542MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. ™ 4 Axis TB6600 Box Professional Driver Board Kit for CNC DIY. This4 Axis TB6600 Box Professional Driver Board is equipped with TB6600HG chip.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
You can mount all three drives by drilling two holes virtually anywhere you prefer in your enclosure. Thumbnuts get them out within seconds for servicing, or to get them out of the way till your ready for final mounting.
Buy It Now
Free Shipping
Condition: New Location: , United States
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. ™ 4 Axis TB6560 Standard Driver Board Kit for CNC DIY. This4 Axis TB6560 Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
$30.00 Shipping
Condition: New Location: , United States
CW5045 high microstep stepper motor driver. 4 x23HS2430B Nema23 stepper motor (Dual Shaft) 112mm,425oz-in,2.8N.m,3.0A. 4 xCW5045 stepper motor driver 24-50V,4.5A,256microstep. 1 x5 Axis breakout board V5 type.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
This DIY kit includes the following components to build your VFD power cable (. The cable that plugs into your wall outlet, and runs power to your VFD). 10in of 13mm (600v 125c) temp rated heatshrink (single wall for flexibility )(T his is to build your VFD's end boot that goes around your leads).
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
This DIY kit includes the following components to build your VFD power cable (. The cable that plugs into your wall outlet, and runs power to your VFD). 10in of 13mm (600v 125c) temp rated heatshrink (single wall for flexibility )(T his is to build your VFD's end boot that goes around your leads).
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
CNC Relay Kit To Add A Relay To Any Breakout Board (Subsystm Design) - YouTube. Full Mounting Hardware For The Relay Splitter & Relay including Nylon Standoffs. 2 Circle Ring Connectors For The Safest Connections For The Relay.
Buy It Now
Free Shipping
Condition: New Location: , United States
3x Nema24 3.3Nm/467 Oz-in 60BYGH100-401A Stepper Motors. The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
0 bids Free Shipping
Condition: New Location: Rowland Heights, United States
DM556T Driver Specification. 1 x Nema 23 Bipolar 3Nm (425oz. in) 4.2A 57x57x114mm 4 Wires Stepper Motor CNC. Holding Torque: 3.0Nm(425oz. 1 x Digital Stepper DriveDM556T. Motor Type: Bipolar Stepper. ).
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
How To Build A CNC System's Double Shielded Cable Assembly - YouTube. CNC Accessory Wiring Kit (Bullet Proof EMI Protection) - YouTube. (This cable's tinned braided copper shield is to be rolled in your fingers to create your drain lead. ).
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. ™ 4 Axis TB6560 Box Standard Driver Board Kit for CNC DIY. This4 Axis TB6560 Box Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: , HK
This function is widely applied in RBI machine, Conveyor etc. EMA232-5615S4 Nema23 Stepper Motor. Stepper motors and drivers from ENGMATE. Compared to standard version, professional version mainly has two more functions.
Buy It Now
Free Shipping
Condition: New Location: Rowland Heights, United States
Stepper Motor 57BYGH627. 3 PCS Nema 23 Stepper Motor. 2, Stepper Motor Driver with 4.2A Current, DQ542MA. It is designed for use with 2-phase hybrid stepper motor of all kinds with. Step Angle: 1.8 degree.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Set Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
$85.00 Shipping
Condition: New Location: , China
Nema42 20N. m Closed Loop Servo Motor 221mm+HSS2206 3-Phase Hybrid Driver CNC Kit. m Closed Loop Servo Motor 3Phase Nema42 221mm 6A+HSS2206 Driver 220V CNC Kit. 1 x NEMA42 110HCE221-4203A19-B39 Closed loop motor 20N.
Buy It Now
Free Shipping
Condition: New Location: , United States
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This4 Axis TB6560 Box Professional Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: , United States
Machinable material: Wood、 plastic、 PCB、 PVC、 carbon fiber、 acrylic、 density board etc. If you change the spindle to a module,then also can carve the kraft paper, wood, leather(wallet), bamboo, rubber.
Buy It Now
Free Shipping
Condition: New Location: , United States
The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
Pro-Grade Solder Type Connectors (Retrofits, Gecko G201x,G203v,G214 Drives) - YouTube. These simply require drilling a 16mm hole to mount the panel mount male connector into your enclosure. You can add 15Ft.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This4 Axis TB6600 Standard Driver Board is equipped with TB6600HG chip.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
Resistors for these motors are also included for the G540. Gecko G540 20AWG 13ft. Pro Shielded Motor Cables (Made With Signal Cable) - YouTube. MythBusted Stepper Motor Accuracy Less Than. 001in! Gecko G540 - YouTube.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. ™ 4 Axis TB6600 Standard Driver Board Kit for CNC DIY. This4 Axis TB6600 Standard Driver Board is equipped with TB6600HG chip.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This4 Axis TB6560 Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: , United States
1 x 57HSE76N 2N. m Closed Loop Nema23 Servo motor 76mm 4.2A. HSS57 is 2 phase nema 23 series hybrid stepper servo driver. The torque reducing is much lower than open loop stepper motor when it is at higher speed.
Buy It Now
$150.00 Shipping
Condition: New Location: , China
3PCS Nema34 Stepper Motor 34HS9840 with 1090oz-in holding torque, 4.0A,98mm. 3PCS Stepper Driver DM860A with 7.8A replacing MD882. Nema 34 stepper motor Holding torque: 1090 oz-in ( 7N. Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. ).
Buy It Now
$118.00 Shipping
Condition: New Location: , United States
3 PCS Nema 34 stepper motor with 460oz-in for Single sha ft ,4A. 3 PCS DQ860MA Stepper Driver with 80VDC,7.8A, 256 Microstep. 1, Stepper Motor. Hording torque when DQ860MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping
Condition: New Location: , China
4PCS Stepper Driver DQ860HA with 7.8A replacing DQ860MA. Holding torque when DQ860MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping
Condition: New Location: , China
Stepper Motor Driver DQ542MA. Holding torque when DQ542MA runs under high speed, is also significantly higher than the other two-phase driver, what’s more. 3.0Nm(425oz. 4PCS Nema 23 Stepper Motors 57BYGH115-003B Dual Shaft 4.2A 425oz-in. ).
Buy It Now
Free Shipping
Condition: New Location: , United States
3 pcs Nema 34 stepper motor with dual shaft,Φ14mm 1600oz. in, biloar，34HS5435C-37B2. Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping
Condition: New Location: Milner, United States
CNC & 3D Printing. 4x8' Rail + Ballscrews Set (20mm). Automation & Linear Motion.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
1 x Digital Stepper Drive 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor. 1 x Nema 23 Bipolar 1.8deg 2.4Nm(339.87oz.in) 4A 57x57x82mm 4 Wires. Step Angle: 1.8deg. Shaft Length: 21mm. Lead Length: 300mm.
Buy It Now
Free Shipping
Condition: New Location: , United States
The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
Buy It Now
Free Shipping
Condition: New Location: , United States
4 pc Stepper motor driver High Perfermance Stepper Driver DM860A Up to7.8A, 24-80VDC With Fan. Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping
Condition: New Location: , United States
Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors. + 3 x New 57BYGH56-401A Single-Shaft Stepper Motors 1.2Nm/175oz-in 2.8A.
Buy It Now
Free Shipping
Condition: New Location: , China
3PCS Nema 34 Stepper Motor with Dual 14MM shaft 1600oz-in holding torque, 3.5A,151mm. 3PCS Stepper Driver DQ860HA with 7.8A replacing DQ860MA. 1, Stepper Motor. 1 stepper motor:85BYGH450C-012B. Holding torque when DQ860MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping
Condition: New Location: , HK
Stepper motors and drivers from ENGMATE. This function is widely applied in RBI machine, Conveyor etc. This kit is suitable for driving 2-phase and 4-phase Nema 17, Nema 23 hybrid stepping motors with a 1.0A-4.2A current.
Buy It Now
Free Shipping
Condition: New Location: , United States
The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
Buy It Now
Free Shipping
Condition: New Location: , United States
Hording torque when DQ860MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. 8 channels output phase current setting.
Buy It Now
Free Shipping
Condition: New – Open box Location: Hickory, United States
STEPPERONLINE CL57T Driver 1 Axis Closed Looper CNC Kit 23HS22 NEMA 23 4004D-E1000 1.2Nm 4A.
Buy It Now
$29.00 Shipping
Condition: New Location: Hoffman Estates, United States
NEMA42 HYBRID STEPPER MOTOR 4230 oz-in Hybrid Stepper Motor, Single shaft. 1 pcs Nema 42 4230oz/in 8.0A Stepper Motor 1/d" Dual Shaft (KL42H2201-80-4A). 1 pc 8.3 Amp Digital Bipolar Stepper Motor Driver, AS 80-220VAV - 32 bit DSP Based (KL-2283).
Buy It Now
$14.99 Shipping
Condition: New Location: Sacramento, United States
PICTURE SHOWs 6 LIMIT SWITCHES, YOU WILL RECEIVE Six with this KIT. WE DECIDED TO INCLUDE SIX LIMIT SWITCHES, BETTER VALUE FOR YOU. Covers a 3 axis system. 6 of our lever arm 3 amp 125 vac, 1.5 amp 250 vac NC/NO limit switches.
Buy It Now
Free Shipping
Condition: New Location: 龙岗区, China
Holding torque: 1.2Nm 2Nm 4.5N.m 8.5N.m 12.5N.m. Stepper Motor. 1 x Closed-loop stepper Motor. 1 x Stepper Driver. motor with VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw.
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
1 x DM860I: Digital Stepper Driver 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Drive. 1 x 34HS31-6004S: Nema 34 Stepper Motor Bipolar 1.8deg 4.8Nm(679.74oz.in) 6.0A 86x86x80mm 4 Wires. Body Length: 80mm.
Buy It Now
Free Shipping
Condition: New Location: , United States
4 pcs Nema 34 stepper motor 1232 oz.in bipolar. Nema 34 stepper motor. Great News from Longs motor!
Buy It Now
Free Shipping
Condition: New Location: , HK
This function is widely applied in RBI machine, Conveyor etc. EMA232-7630S4 Nema23 Stepper Motor. Stepper motors and drivers from ENGMATE. ™ 5 Axis Kit for CNC DIY. 5 Axis Professional Breakout Board.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This4 Axis TB6560 Set Professional Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: , United States
The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
1 x Digital Stepper Drive 1.8~5.6A 20-50VDC DM556T. 1 x Nema 23 Bipolar 3Nm (425oz. in) 4.2A 57x57x113mm 4 Wires Stepper Motor CNC. Holding Torque: 3.0Nm(425oz. Body Length: 113mm. Motor Type: Bipolar Stepper. ).
Buy It Now
Free Shipping
Condition: New Location: , United States
【US】CNC Nema23 2N. m Closed Loop Hybrid Stepper Servo Motor Driver Kit 76mm&HSS57. HSS57 2-Phase Hybrid Stepper Servo Driver. HSS57 is 2 phase nema 23 series hybrid stepper servo driver. The torque reducing is much lower than open loop stepper motor when it is at higher speed.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
This DIY kit includes the following components to build your VFD power cable (. The cable that plugs into your wall outlet, and runs power to your VFD). 10in of 13mm (600v 125c) temp rated heatshrink (single wall for flexibility )(T his is to build your VFD's end boot that goes around your leads).
Buy It Now
Free Shipping
Condition: New Location: , HK
EMA342-7842S4 Nema34 Stepper Motor. Stepper motors and drivers from ENGMATE. ™ 4 Axis Kit for CNC DIY. • Suitable for 2-phase and 4-phase Hybrid stepper motors. Hybrid Stepper Motor(EMA342-7842S4). 5 Axis Breakout Board.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
Piece of 18AWG 4 leadDouble Shielded DS Flexion Robotics Grade Cable. DS Flexion 18awg Motor Retrofit Cable Kit. Here's an overview video of DS Flexion Cable. DS Flexion Ultra Flex Double Shielded Robotics Cable Is Here!
0 bids Free Shipping
Condition: New Location: Walton, United States
1 x Digital Stepper Drive 1.8~5.6A 20-50VDC DM556T. 1 x Nema 23 Bipolar 3Nm (425oz. in) 4.2A 57x57x114mm 4 Wires Stepper Motor CNC. Holding Torque: 3.0Nm(425oz. Body Length: 113mm. Motor Type: Bipolar Stepper. ).
Buy It Now
Free Shipping
Condition: New Location: , China
3 Axis Nema 34 stepper motor 1600 oz.in & Driver &Power. 3 pcs Nema 34 stepper motor 1600 oz.in bipolar with single Shaft. Nema 34 stepper motor Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping
Condition: New Location: , HK
The TB1H is a high performance microstepping driver based on the latest original TOSHIBA high-efficiency TB6600HG IC. The TB6600HG adopts single-chip PWM bipolar sinusoidal chopper to ensure the low vibration and high efficiency.
0 bids Free Shipping
Condition: New Location: Chino, United States
HBS86H is equipped with 86 series closed-loop stepping motors, which is convenient for traditional stepping system upgrades. The cost is only 50% of the AC servo system. HBS86H Nema34 Closed-loop Stepper Motor 12N.
|
|
|
|