|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: , HK
EMA342-7842S4 Nema34 Stepper Motor. Stepper motors and drivers from ENGMATE. ™ 4 Axis Kit for CNC DIY. • Suitable for 2-phase and 4-phase Hybrid stepper motors. Hybrid Stepper Motor(EMA342-7842S4). 5 Axis Breakout Board.
Buy It Now
$90.00 Shipping
Condition: New Location: , China
1.5KW 220V ER16 Water Cooled Spindle Motor & HY Inverter VFD &80mm clamp CNC Kit. 1 x Inverter 3HP 1.5KW VFD 220V input with 220V output. 1 x Inverter 1.5KW VFD 220V input with 220V output. 1 x1.5KW Water-cooledspindle motor ER16 24000rpm 220V 4 bearings 80mm.
Buy It Now
Free Shipping
Condition: New Location: , HK
1 5 Axis Professional Breakout Board + 4 EMA2-080D72 Microstep Motor Drivers. This function is widely applied in RBI machine, Conveyor etc. • Compatible with all the 2 phase, 3 phase and 4 phase microstep drivers in the market.
Buy It Now
Free Shipping
Condition: New Location: , HK
The breakout board using high-performance three-state bus driver 74HC244 and Schmitt inverter 74HC14. The input signal is amplified, rectified, filtered to make the drive capability of the output signal more stable and stronger.
Buy It Now
$300.00 Shipping
Condition: New Location: , China
BT30 ER25 tool holder, easy change, high speed, suitable for CNC precision parts machining. Tool holder: BT30. Power: 9KW. 1x 9KW VFD Inverter. 1x 9KW Air cooled ATC Spindle Motor. Air Cooled ATC Spindle Motor.
Buy It Now
$100.00 Shipping
Condition: New Location: 龙岗区, China
Holding torque: 1.2Nm 2Nm 4.5N.m 8.5N.m 12.5N.m. Stepper Motor. 1 x Closed-loop stepper Motor. 1 x Stepper Driver. motor with VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
How To Build A CNC System's Double Shielded Cable Assembly - YouTube. CNC Accessory Wiring Kit (Bullet Proof EMI Protection) - YouTube. (This cable's tinned braided copper shield is to be rolled in your fingers to create your drain lead. ).
Buy It Now
$50.99 Shipping
Condition: New Location: , China
LCDA357H Features 1 pcs3 phase closed loop stepper motor driver LCDA357H. 57mm stepper motor driver. 57mm stepper motor. 1 pcs3 phase NEMA23 Closed-loop stepper motor(with 0.5m motor cable ). Suitable Motor.
Buy It Now
Free Shipping
Condition: New Location: , United States
The DQ860MA is an economical microstepping driver based on patented technology of Wantai Motor. It is suitable for driving 2-phase 4-phase hybrid stepping motors. 4 PCS Nema 34 Stepper Motor with Single shaft 1232oz-in holding torque.
Buy It Now
Free Shipping
Condition: New Location: , HK
The Nema23 stepper motor mounting bracket can match Nema23 standard stepper motor and gear/servo stepper motor. 1pcs Nema23 Stepper Motor Mounting Bracket For DIY CNC Kit. Stepper Motor Mounting Bracket.
Buy It Now
Free Shipping
Condition: New Location: Rancho Cucamonga, United States
1.Flange: NEMA23 57MM 2.Step angle: 1.8 degree 3.Phase: 2PH 4.Hold torque: 1.2Nm 5.Motor Length: 56MM 6.Rated Speed: 1000RPM 7.Encoder: 1000line 8.Resistance: 0.4(ohm) 9.Inductance: 1.2mH 10.Class of insulation: B.
0 bids $4.00 Shipping
Condition: New Location: , China
5, CP +, CP -: step pulse input (the rising edge of the effective, duration of >10 S). 4, fine points: 1/8, 1/2 (the whole step is 1.8 degrees). 3, drive mode: full bridge drive. 2, phase current: the current module can be adjusted (0~5A).
Buy It Now
Free Shipping
Condition: New Location: , China
1x 3m power cable. Input command signal. Functions assigned to each input signal port at the factory. Motor power cable. The four motor power cables must be connected to the correspoonding teiminals of the driver and cannot be connected incorrectly.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. ™ 3 Axis TB6560 Set Professional Driver Board Kit for CNC DIY. This3 Axis TB6560 Set Professional Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: , China
The function of AC servo motor driver. 1 3M Encoder Cable. 1 3M Power Cable. The length of the cable is 3m. 1 kit Motor+ Drive. 25-pin parallel port connector. Air cooled (heat transfer film, the strong cold wind fan).
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6600 Standard Driver Board is equipped with TB6600HG chip.
Buy It Now
Free Shipping
Condition: New Location: , United States
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
$160.00 Shipping
Condition: New Location: , China
3 phase NEMA 52 28Nm 3965ozf. in Closed loop Stepper servo motor driver kit JMC 130J12205EC-2500+3HSS2208H. 1pcs 3phase motor driver 3HSS2208H;. CNC machine ,cutting machine ,engraving machine. Without losing step, High accuracy in position.
Buy It Now
Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Nema 17 Stepper Motor ☑️Reliable and Stable Performance focus on the quality of stepper motors and minimizes the rate of defective ones, which ensure that customers can get the most reliable and stable stepper motors. ☑️Low Noise 1.Use excellent materials; 2. Reasonable stepper motor design structure 3. High Precision motor assembly, which makes stepper motors stand out by providing quieter and smoother operationSafely Packaging ☑️Safely Packaging specially designed Individual package to ensure your packages withstand the long trip and arrive safely and intactly. Besides, the package is made from recyclable materials, providing you with professional safety delivery.
0 bids $100.00 Shipping
Condition: New Location: 龙岗区, China
NEMA34 8.5NM Closed-loop Stepper Motor Driver Encoder 6A 2ph Hybrid Servo Kit. 1 x Nema34 8.5NM Closed-loop stepper. Stepper Motor & Driver. 1 x Stepper Driver. Servo Motor & Driver. motor with VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw.
0 bids Free Shipping
Condition: New Location: , China
New Arrival. Discover Other Similar Products. We will do our best to assist you. expert advice. all good, High quality. The important thing is: the reason for the application.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Box Professional Driver Board is equipped with TB6560AHQ chip.
Buy It Now
$12.30 Shipping
Condition: New Location: Chino, United States
Nema 23 0.9Nm Stepper Motor with100mm linear slide kit CNC Sliding Table 24V 3A.
Buy It Now
Free Shipping
Condition: New Location: , China
Stepper Driver. Hybrid Stepper Motor. Stepper Motor Driver. Linear Stepper Motor. Geared Stepper Motor. Closed Loop Stepper Motors. Nema 06 (14 x 14). Nema 08 (20 x 20).
Buy It Now
$100.00 Shipping
Condition: New Location: 龙岗区, China
1. Shipping listing(we will send the units as you choose) Select: 3 Axis Stepper&Power Supply&Controller 3 PCS Drive：HBS860H 3 PCS Motor：57HBS36 2 PCS Power Supply：400W 60V 1 PC CNC Controller：DDCSV3.1-3 + Handwheel 3 PCS Encoder Cable：3-meter Select: Only 3 Axis Stepper 3 PCS Drive：HBS860H 3 PCS Motor:57HBS36 3 PCS Encoder Cable:3-meter Select: Only Controller 1 PC CNC Controller:DDCSV3.1-3 + Handwheel Select: Only 1pc Power Supply 1PC Power Supply:400W 60V.
0 bids Free Shipping
Condition: New Location: Chino, United States
1 Manual Sliding Table Linear Rail Guide. Material: Aviation Aluminum. Lead: 5mm/0.2in. Operation Mode: Manual. Bottom Movable Nut Size: M6. Bearing Plate Height: 56mm/2.2in. Side Mounting Hole Size: M4.
Buy It Now
Free Shipping
Condition: New Location: , United States
??Features： Model: Ggp Effective Stroke: 100mm Accuracy: 0.03mm Ballscrew Diameter: 12mm; Lead: 4mm Speed:40-100mm/S Horizontal Load: 30kg-max 50kg Vertical Load: 15kg Nema 23 Stepper Motor; Diameter 57 * 56mm Voltage: 24V Current: 3A Torque: 0.9nm Lead: 4mm (One Turn of the Screw Rod) ?? Package Included: 1pc Ball Screw Guide Sliding Table 1pc 23nema Stepper Motor ?? Product Clearance: 1-2mm.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6600 Set Standard Driver Board is equipped with TB6600HG chip.
Buy It Now
$45.00 Shipping
Condition: New Location: , China
The software is USBCNC,not mach3,pls note this. 4 Axis USBCNC Nema23 Stepper motor 270oz-in 3A 76mm+TB6560 Driver board CNC Kit. 4 Axis Nema23 Stepper motor 270oz-in 3A 76mm+TB6560 Driver board USBCNC Kit.
Buy It Now
$11.85 Shipping
Condition: New Location: Chino, United States
Specifications Material: Aluminum Screw: T8 Anti-loosening Screw Guide: 4mm/0.157" Installable Laser Diameter: 40mm/1.57" Sliding Stroke: 85mm/3.35" Spindle Hole Diameter: 52mm/2.05" Gross Weight: 1.8kg/3.97 Lbs Product Weight: 1.7kg/3.75 Lbs Package Size: 25.5*19*10cm/10.04*7.48*3.94" Product Size: 13.5*7*13.25cm/5.31*2.76*5.22" Package Included 1* Z-axis Stroke with Stepping Motor 1* Connection Cable 1* Wrench 4* Screws.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specifications Material: Aluminum Screw: T8 Anti-loosening Screw Guide: 4mm/0.157" Installable Laser Diameter: 40mm/1.57" Sliding Stroke: 85mm/3.35" Spindle Hole Diameter: 52mm/2.05" Gross Weight: 1.8kg/3.97 Lbs Product Weight: 1.7kg/3.75 Lbs Package Size: 25.5*19*10cm/10.04*7.48*3.94" Product Size: 13.5*7*13.25cm/5.31*2.76*5.22" Package Included 1* Z-axis Stroke with Stepping Motor 1* Connection Cable 1* Wrench 4* Screws.
Buy It Now
Free Shipping
Condition: New Location: , HK
™ 3 Axis TB6600 Box Standard Driver Board Kit for CNC DIY. For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6600 Box Standard Driver Board is equipped with TB6600HG chip.
0 bids $10.00 Shipping
Condition: New Location: Chino, United States
Therefore, it is very wear-resistant. This item is made of high-quality and hard aluminum material, which is more durable and lasts longer. It is artificially and naturally treated to resist wear and tear.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description： MATERIAL: The guide rail is made of high-quality carbon steel, the bearing slider block is made of bearing steel with aluminum alloy housing, thickened material is not easy to damage; More steel bearing balls, low friction, light and flexible, smooth and unimpeded, longer service life. DESIGN: Adopt four-point contact design, which can withstand loads evenly in all directions and self-aligning function, can absorb the assembly error of the mounting surface, with high precision under high load. .
0 bids Free Shipping
Condition: New Location: Perth Amboy, United States
SBR16-800 mm Linear Guideway Rail Kit. Complete Linear Rail Kits: This linear rail set includes 2pcs 31.5 in / 800 mm long SBR16 rail shafts and 4pcs SBR16UU blocks. Sliding blocks are used cooperatively with rails, smooth sliding provided by the inside linear bearing.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description： Advantage: Long service life due to low friction, low operating noise. No stick-slip effect, less heating, reduced drive power required. Low friction loss, high transmission efficiency. Easy to Install: Steel support rail with pre-drilled holes for easy assembly. Stainless steel linear optical axis guide bearings. Easy to install, no need for maintenance. High Precision: Industrial-Grade standard linear rails with high precision. Ballscrew use the ball movement with small starting torsion, it does not appear a sliding motion creeping phenomenon which can ensure accurate positioning. .
Buy It Now
Free Shipping
Condition: New Location: Ontario, United States
CNC parts linear rails are made of carbon steel, linear Bearings made of quality bearing steel with aluminum alloy housing. Aluminum alloy support rail with pre-drilled holes for ease of mounting. Easy to install, no need for maintenance.
Buy It Now
Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Small size and light weightHigh transmission efficiency, widedeceleration range andhigh precision.Low noise,large outputtorque and long life.Using internationalstandard steel, using20CvMnT carburizingquenching and tooth grinding. Under the premise ofensuring precisiontransmission, it is perfectlyused in applications wherethe speed is reduced, thetorque is increased, and theload/motor moment ofinertia ratio is reduced.
Buy It Now
$15.00 Shipping
Condition: New Location: , China
1 x 24V Brushless DC Spindle Motor( Without Collet ). Item type: brushless motor kit. CORROSION RESISTANT ALUMINUM ALLOY: Brushless motor is made of good quality aluminum alloy material, sturdy and durable, possess good strength and good corrosion resistance.
Buy It Now
Free Shipping
Condition: New Location: , United States
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6600 Box Standard Driver Board is equipped with TB6600HG chip.
Buy It Now
Free Shipping
Condition: New Location: , China
Stepper Driver. Hybrid Stepper Motor. Stepper Motor Driver. Linear Stepper Motor. Geared Stepper Motor. Closed Loop Stepper Motors. 1 x OK2D42BH: Closed Loop Stepper Driver 0~5.6A 18~70VDC for Nema 17, Nema 23, Nema 24 Stepper Motor.
Buy It Now
Free Shipping
Condition: New Location: , United States
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This4 Axis TB6560 Box Professional Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: , China
Holding torque: 1.2Nm 2Nm 4.5N.m 8.5N.m 12.5N.m. 1 x Closed-loop stepper Motor. 1 x Stepper Driver. Temp rise(Max) 80 Degree Celsius. Step angle 1.8 1.8 1.8 1.8 . Protection Over current action value 1.18~1.32A Over current action value 10.8~13.2A.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
Spindle cable kit including an HY H17 spindle connector for you to assemble your spindle cable minus the solder. This video covers the HY H17 connectors I carry. NEW HY H17 Connectors Made To Fit 16/4 Double Shielded Spindle Cable.
Buy It Now
Free Shipping
Condition: New Location: , China
Linear Rail Type: HGR25 Rail. 2Pcs HGR25 -" Lmm(You choose) " Linear Guides Rail. 4Pcs HGH25CA Carriages. 1Pcs SFU2505 -"Lmm(You choose )" ballscrew-C7 + 1Pcs SFU2505 Ball nut. Ballscrews Type: SFU2505.
0 bids Free Shipping
Condition: New Location: , United States
Therefore, it is very wear-resistant. This item is made of high-quality and hard aluminum material, which is more durable and lasts longer. It is artificially and naturally treated to resist wear and tear.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
220V 9KW ISO30 ATC Air Cooled Spindle Motor Automatic Tool Change 24000rpm+VFD Inverter CNC Mill Kit. Power: 9kW(12HP). Power of inverter: 9kW. Machine Tool Air-cooled Spindle 1 VFD Inverter 1 ISO30 Tool Holder 1 Keyslot 1.
Buy It Now
Free Shipping
Condition: New Location: , HK
The M335 is a high performance microstepping driver with low price. The M335 adopts single-chip PWM bipolar sinusoidal chopper to ensure low vibration and high efficiency. It is suitable for driving 2-phase and 4-phase hybrid stepping motors, so the Nema16, Nema17, Nema23 stepper motors with a 0.5A-3.5A current will be suitable.
Buy It Now
Free Shipping
Condition: New – Open box Location: San Antonio, United States
It is compatible with Genmitsu 3018-PROVer V2/ 3018-PROVer/ 3018-PROVer Mach3/ 3018-MX3 CNC machine. There is a Z-axis rotary knob on its top. You can adjust the height of the Z-axis manually without power.
Buy It Now
$70.00 Shipping
Condition: New Location: , China
CNC stepper motor driver board TB6560,the new chip TB6560AHQ of TOSHIBA, the max ouput peak current can reach to 3.5A, this driver board can drive the 2-phase or 4-phase stepper motor whose current is less than 3A.
0 bids Free Shipping
Condition: New Location: Parrish, United States
LCD Upgrade Kit for 14” FANUC A61L-0001-0074 CRT Monitor – Plug-and-Play CNC Retrofit. Key Features: -Replaces CRT model: FANUC A61L-0001-0074. This LCD upgrade kit is compatible with machines that originally used the FANUC A61L-0001-0074 CRT monitor, including.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description： CONVENIENCE: Steel support rail with pre-drilled holes for easy mounting. Stainless steel Linear optical axis guide bearings linear movement. Easy to install, no need for maintenance. The ballscrew movement without stick-slip effect, less heats up, less drive power required HIGH PRECISION: Motor-driven guide rail achieves high precision linear motion. Designed to achieve high precision linear motion, low friction coefficient. Ball screw use the ball movement with small starting torsion, it does not appear a sliding motion creeping phenomenon which can ensure accurate positioning .
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
Spindle cable kit including an HY H17 spindle connector for you to assemble your spindle cable minus the solder. This video covers the HY H17 connectors I carry. NEW HY H17 Connectors Made To Fit 16/4 Double Shielded Spindle Cable.
Buy It Now
Free Shipping
Condition: New Location: , United States
Style: 4KW ER25. Style: 4KW ER25. Part Number: ytx-220V-4KW air kit. MPN: ytx-220V-4KW air kit. Item model number: ytx-220V-4KW air kit. WIDE APPLICATION-Kinds of engraving and drilling material :Kinds of drilling and engraving materials, such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: Katy, United States
V3 Engraver 3D Printer CNC Shield Expansion Board A4988 Driver for Arduino. 4 stepper motor connection. When inserting the A4988 module, must be careful not to insert opposite. 1 x V3 Engraver 3D Printer CNC Shield Expansion Board A4988 Driver for Arduino.
Buy It Now
Free Shipping
Condition: New – Open box Location: Phoenix, United States
In which it may have signs of wear, faded color, stains, scratches or imperfections. Note: see pictures. #1- It's the wrong size or doesn't fit. Now, if we made an error with your order -we will 100% correct it.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description： Complete Linear Rail Kit: This linear rail includes of 2PCS SBR20-2200mm linear guide rail, 4PCS SBR20UU bearing blocks, 4PCS 20mm limit block fixed ring. High Precision: SBR20UU bearings adopt four-point contact design, which can withstand loads evenly in all directions. Premier quality bearing blocks moves smoothly while using, End stops which avoid the blocks sliding off the end of the rail. Easy to Install: Conveniently install the linear rail by aligning the track with the mouth of the slide rail and pushing the slide rail until the slide rail completely falls. Its no need for maintenance. .
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6600 Set Professional Driver Board is equipped with TB6600HG chip.
Buy It Now
Free Shipping
Condition: New Location: , United States
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6600 Box Standard Driver Board is equipped with TB6600HG chip.
|
|
|
|