|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Box Professional Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: Ontario, United States
CNC parts linear rails are made of carbon steel, linear Bearings made of quality bearing steel with aluminum alloy housing. Aluminum alloy support rail with pre-drilled holes for ease of mounting. Easy to install, no need for maintenance.
Buy It Now
$8.00 Shipping
Condition: New Location: , China
2pc Linear Block EGH15CA. 1pc EGR15Linear Rail length 500mm. HG series linear guideways are designed with load capacity and rigidity higher than other similar products with circular-arc groove and structure optimization.
Buy It Now
Free Shipping
Condition: New Location: , HK
All the 2 or 4 phase Nema17, Nema23, Nema24 stepper motors with current range of 0.2A~5.0A work perfectly with this TB6600HG Stepper Driver. Both of the standard version and professional version are compatible with theMach2, Mach3(Default Software), LinuxCNC(EMC2), KCAM4 CNC Software, etc.
Buy It Now
$18.00 Shipping
Condition: New Location: , United States
1 x TRH20-300mm linear guide.
Buy It Now
Free Shipping
Condition: New Location: , United States
Readout allowable input signal: TTL square wave. (4) Digital readout kit can avoid wasting weeks to check machine precision. 1pc Digital Readout or 1pc linear scale (100.1000mm for choose). (6) 1pc digital readout(2Axis/3Axis) with scales(upon your options) ,5μm (0.0002") resolution (at 45ºC).
Buy It Now
$10.00 Shipping
Condition: New Location: , China
Applicable to:300w 400w 500w spindle motor. Drill chuck Spindle Arbor (Drill chuck Clamping range：1.5-10mm). Air Cooled Spindle Model: 52mm Spindle motor mount bracket. 3.52mm clamp Support mach3 function.
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
1 x DM860I: Digital Stepper Drive 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Kit. 1 x 34HS39-6004S: Nema 34 Stepper Motor 8.0Nm(1132.89oz.in) 6.0A 86x86x98mm 4 Wires. This CNC kit included Step Angle: 1.8deg.
Buy It Now
Free Shipping
Condition: New Location: , United States
4 PCS Nema 34 Stepper Motor with 1600oz-in holding torque for Dual shaft,3.5A. 1, Stepper Motor. 2, Stepper Motor Driver DQ860MA. Step Angle: 1.8 degree. ◆Pulse frequency up to 200KHz. The DQ860MA is an economical microstepping driver based on patented technology of Wantai Motor.
Buy It Now
Free Shipping
Condition: New Location: , HK
1 5 Axis Breakout Board + 5 EMA2-080A72 Microstep Motor Drivers. 5 Axis Breakout Board. ™ digital hybrid stepper driver is a high performance Microstep Motor Driver adopting32-bit DSP, pure sine wave subdivision technology.
Buy It Now
$18.00 Shipping
Condition: New Location: , United States
Drive nema 23 series 2N. 2HSS57 is 2 phase nema 23 series hybrid stepper servo driver. The torque reducing is much lower than open loop stepper motor when it is at higher speed. Stepper motor closed loop system, never lose step.
Buy It Now
Free Shipping
Condition: New Location: , China
3 Axis Nema 34 stepper motor 1600 oz.in & Driver &Power. 3 pcs Nema 34 stepper motor 1600 oz.in bipolar with single Shaft. Nema 34 stepper motor Hording torque when DM860A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping
Condition: New Location: Rice Lake, United States
Buy It Now
Free Shipping
Condition: New Location: , United States
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Standard Driver Board is equipped with TB6560AHQ chip.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description： Complete Linear Rail Kits: This linear rail set includes 2pcs 1500 mm long SBR16 rail shafts and 4pcs SBR16UU blocks. Sliding blocks are used cooperatively with rails, smooth sliding provided by the inside linear bearing Premier Linear Guiding System: Perfect combination of the main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with a high precision linear bearing inside .
Buy It Now
Free Shipping
Condition: New Location: , United States
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. ™ 3 Axis TB6560 Set Standard Driver Board Kit for CNC DIY. This3 Axis TB6560 Set Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
$35.00 Shipping
Condition: New Location: , China
4 pcs Nema 23 stepper motor 287 oz.in bipolar. Nema 23 stepper motor Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Nema 23 Stepper Motor;. 1pc 23nema Stepper Motor. Effective Stroke: 100mm. Current: 3A. 1pc Ball Screw Guide Sliding Table. Lead: 4mm (One Turn of the Screw Rod). Your satis faction is our ultimate goal.
Buy It Now
$89.00 Shipping
Condition: New Location: , HK
Cnc 2 Axis Lathe NEMA23 MOTOR 22kg. 2x NEMA23 2ph 22kg. cm Step Motor. TURBOCNC, KCAM, MACH3 etc. MIRCO STEPPER FOR 400 TO 25000 STEP PER TURN. 2x 4.2A Industrial Grade Mirco step Drive. Mirco step form 400 to 25000 step per Revelution.
Buy It Now
Free Shipping
Condition: New Location: , HK
The Latest 3rd Generation Revolutionary & Standard TB6560 3 Axis Stepper Driver Box Set (TB3CD-S (Box)). of the computer, and thenrerun the recorded G-code to make the stepper motor work without the computer any more.
Buy It Now
$78.00 Shipping
Condition: New Location: , China
(· 1 x 4.5KW / 6Kw Square Air-cooled spindle motor( ER32 380 V,18000rpm,4 bearing,300Hz). Collet size:ER32. 2) Before driving, turned by hand spindle. If sensory block is not flexible, you should troubleshoot, and then check the direction of rotation of the spindle from the spindle end to see if the match should rotate counterclockwise power wiring should be changed to make it consistent.
0 bids $8.99 Shipping
Condition: New Location: , China
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description： Complete Linear Rail Kit: This linear rail includes of 2PCS SBR20-2200mm linear guide rail, 4PCS SBR20UU bearing blocks, 4PCS 20mm limit block fixed ring. High Precision: SBR20UU bearings adopt four-point contact design, which can withstand loads evenly in all directions. Premier quality bearing blocks moves smoothly while using, End stops which avoid the blocks sliding off the end of the rail. Easy to Install: Conveniently install the linear rail by aligning the track with the mouth of the slide rail and pushing the slide rail until the slide rail completely falls. Its no need for maintenance. .
Buy It Now
Free Shipping
Condition: New Location: , United States
It has undergone dynamic balancing tests to achieve efficient and high-precision carving operations. Longevity Design: Featuring a four-bearing water-cooled spindle design ensures stable operation, extends the spindle lifespan, and reduces maintenance costs.
Buy It Now
$64.60 Shipping
Condition: New Location: , China
Speed range (RPM): 200-7000 (550W); 200-6500 (750W); 200-6000 (1100W); 200-5000 (1500W); 200-4500 (2200W). Rated torque (Nm): 1.85 (550W); 2.62 (750W); 3.55 (1100W); 5.02 (1500W). The motor output shaft has 15mm thread, which can be equipped with synchronous pulley and ER special chuck, which is widely used in belt sander, polishing machine, small lathe, milling machine, etc.
Buy It Now
$40.00 Shipping
Condition: New Location: , China
TB6600 Stepper motor driver. 3 Axis Nema23 Stepper Motor 165oz-in 1.1N.m 56mm 2.5A + TB6600 Driver 4A CNC kit. 3 x23HS6403stepper motor 56mm length 2.5A 165Oz-in 6.35mm shanft. 1 x 5 axis breakout board V5 type.
Buy It Now
Free Shipping
Condition: New Location: , United States
Style: 1.5KW ER16 kit. MPN: ytx-110V-1.5KW ER16 air kit. Part Number: ytx-110V-1.5KW ER16 air kit. Style: 1.5KW ER16 kit. Item model number: ytx-110v-er16-1.5kw air kit. Power Source: DC. Date First Available: August 11, 2022.
Buy It Now
$62.00 Shipping
Condition: New Location: , China
Hording torque when DM420A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. iver DM420A, peak 2.83A, 128 micstep.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Set Professional Driver Board is equipped with TB6560AHQ chip.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description： SBR16 LINEAR RAIL: Set includes 2 pieces of linear rail 1000 mm/39.37 long rail shafts and 4 SBR16UU blocks. Sliding blocks to be used cooperatively with rails, Smooth sliding blocks moving freely Durable for Use: Parts are made of carbon steel, The shell is made of metal, durable for use.Surface chrome plating treatment to be anti-rust, high hardness and more durable LINEAR GUIDING SYSTEM: With industrial-grade standard SBR block and a high precision linear bearing inside, the original rail set can be stabilized by rail axle bearing rail and aluminum alloy support .
Buy It Now
Free Shipping
Condition: New Location: Cranbury, United States
1500 mm HGR20 Linear Guide Rail: This linear guide rail set includes 2 pieces of HGR20-1500 mm linear guide rail, 4 blocks, 1pcs anti-reverse RM1605-1500 mm ballscrew, 1pcs ball nut, 1pcs BF12 / BK12 nut, and 1pcs 6.35 x10 mm plum coupling.
Buy It Now
Free Shipping
Condition: New Location: , HK
• Compatible with the Mach2, Mach3(Default Software), LinuxCNC(EMC2), KCAM4 CNC Software, etc. Stepper motors and drivers from ENGMATE. ™ digital hybrid stepper driver is a high performance Microstep Motor Driver adopting32-bit DSP, pure sine wave subdivision technology.
Buy It Now
Free Shipping
Condition: New Location: , HK
Description Achieve exceptional precision and accuracy with the Nema 23 closed loop stepper motor kit, delivering reliable performance for your demanding tasks. and Equipped with 24V, 350W switching power supply.The Nema 23 closed loop stepper motor driver kit find extensive use in fields such as machine tools, 3D printers, CNC machine, carving machine and automation application. ✅[High Torque] The high torque of the 57x54mm(1.2Nm),57x80mm(2.2Nm),57x110mm(3Nm) stepper motor driver kit not only provides substantial force for managing large or heavy loads but also ensures precise positional control, ensuring accurate installation of each component during assembly and effectively reducing error rates.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Description： MATERIAL: The guide rail is made of high-quality carbon steel, the bearing slider block is made of bearing steel with aluminum alloy housing, thickened material is not easy to damage; More steel bearing balls, low friction, light and flexible, smooth and unimpeded, longer service life. DESIGN: Adopt four-point contact design, which can withstand loads evenly in all directions and self-aligning function, can absorb the assembly error of the mounting surface, with high precision under high load. .
Buy It Now
Free Shipping
Condition: New Location: , HK
™ 3 Axis TB6600 Set Professional Driver Board Kit for CNC DIY. For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6600 Set Professional Driver Board is equipped with TB6600HG chip.
Buy It Now
$25.00 Shipping
Condition: New Location: 龙岗区, China
1. Shipping list (if you are not sure,pls feel free to contact us) 4 Axis Stepper&Power Supply&Controller 4PCS Close loop stepper motor 4PCS Close loop stepper drive 4PCS 200W Power Sypply 4PCS Encoder cable 1PC 4Axis CNC Controller 3 Axis Stepper&Power Supply&Controller 3PCS Close loop stepper motor 3PCS Close loop stepper drive 3PCS 200W Power Sypply 3PCS Encoder cable 1PC 3Axis CNC Controller Only 1 kit Motor+ Driver 1PC Close loop stepper motor 1PC Close loop stepper drive 1PC Encoder cable Only 4Axis Controller 1PC 4Axis CNC Controller Only 3Axis Controller 1PC 3Axis CNC Controller Only 1pc 200W Power Supply 1PC 200W Power Sypply.
Buy It Now
Free Shipping
Condition: New Location: , United States
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This4 Axis TB6560 Set Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
$100.00 Shipping
Condition: New Location: 龙岗区, China
CNC Stone Engraving 5.5KW Spindle Motor Water Cooled ER25 ER32 220V 380V 12000rpm/24000rpm Advantage (1) 100% Brand new and high quality (2) High quality aluminum body (3) Noise reduction upgrades ,less noise (4) Water-cooling, Better cooling effect (5) More fast speed, more high efficiency (6) Durable, long working hours Benefits for you (1) With higher cost performance (2) A variety of models are available (3) Simple appearance, high quality.
Buy It Now
Free Shipping
Condition: New Location: Spring Hill, United States
4 Nema 23 600 oz in motors with 6.4inductance, featuring 8mm dual shaft. These are engineered in house for the best performance when combined with the G540. These motors also include the wiring diagram on them for simple hookup, and go operation.
Buy It Now
Free Shipping
Condition: New Location: , HK
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This4 Axis TB6560 Box Professional Driver Board is equipped with TB6560AHQ chip.
Buy It Now
$119.99 Shipping
Condition: New Location: 龙岗区, China
DDCSV3.1-3 + Handwheel. Stepper Motor. DDCSV2.1-3 + Handwheel. Select: Only 3 Axis Stepper. VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw, linear guide. Your satis faction is our ultimate goal.
Buy It Now
Free Shipping
Condition: New Location: , United States
For building a CNC machine, you need a lot of things. Such as Electronics Kit, Spindle Kit, Linear Motion Kit, and Gantry Kit. This3 Axis TB6560 Box Standard Driver Board is equipped with TB6560AHQ chip.
Buy It Now
Free Shipping
Condition: New Location: Pasco, United States
1 A2M-80SV03230Z Type 1000W AC Servo Motor with brake. Encoder cable. Connected to servo motor. 1 3m Encoder cable with plug. Power: 1000W. 1 S2SVD20 Type Servo Drive. Wiring diagram of S2-SVD servo driver.
0 bids $150.00 Shipping
Condition: New Location: 龙岗区, China
CNC Engraving Kit Nema34 Closed-loop Stepper Motor Driver 12Nm&60V Power Supply Package Included : 1 x Closed-loop Stepper Motor 1 x Stepper Driver 1 x Power Supply Applications : Desktop CNC routers, small CNC mills, laser cutters / engravers, dental mills, electronic assembly & inspection equipments, labeling equipments, pick & place machines, X-Y tables, scientific instruments... Especially for short-distance, short-time, fast start-stop and zero-speed stable stop.
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
1 x Digital Stepper Drive 1.8~5.6A 20-50VDC DM556T. 1 x Nema 23 Bipolar 3Nm (425oz. in) 4.2A 57x57x114mm 4 Wires Stepper Motor CNC. Holding Torque: 3.0Nm(425oz. Motor Type: Bipolar Stepper. This CNC kit included ).
Buy It Now
$80.00 Shipping
Condition: New Location: Rowland Heights, United States
3 pieces Nema 23 step stepper motors with 435 oz.in, 31kg. Nema 23 stepper motor Holding torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
Step Angle: 1.8deg. Lead Length: 500mm. Weight: 3.7kg. Inductance: 5.1mH±20%(1KHz). Number of Leads: 4.
Buy It Now
Free Shipping
Condition: New Location: , HK
The Nema34 stepper motor mounting bracket can match Nema34 standard stepper motor and gear/servo stepper motor. 1pcs Nema34 Stepper Motor Mounting Bracket For DIY CNC Kit. Stepper Motor Mounting Bracket.
Buy It Now
Free Shipping
Condition: New Location: Walnut, United States
Nema 23 Stepper Motor57mm X 56mm 76mm 112mm 1.8 Deg for CNC Mill Kit or 3D Printer. Nema23 57-56 57x57x56mm (2.24"x2.24"x2.20") 2-Phase 4-Wire 1.26N.m 2.475V 4.0A 270oz-in 180N. cm holding torque. Nema23 57-76 57x57x76mm (2.24"x2.24"x2.99") 2-Phase 4-Wire 2.2N.m 2.475V 4.5A 270oz-in 180N.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Application Fields: ✅CNC Machinery: Precision milling, engraving, cutting, and lathe operations. ✅Automated Manufacturing: Robotic arms, conveyor systems, and assembly lines. ✅3D Printing & Laser Cutting: High-resolution positioning for flawless layer transitions. ✅DIY CNC Projects: Ideal for hobbyists upgrading to professional-grade motion control. ✅Industrial Automation: Packaging, textile machinery, and rotary indexing systems. Why Choose This Kit? ✅ The closed loop stepper motor driver kit boasts features such as precise position control, real-time feedback, and automatic error correction. It ensures reliable and accurate motor performance even in challenging environments. ✅ Easy Setup – Pre-matched components save hours of troubleshooting.
Buy It Now
$5.00 Shipping
Condition: New Location: , China
CNC3018 Zaxis Module Aluminum Sliding Table Engraving Machine Accessories Apply Nema17 / 52 42/57 Stepper Motor Spindle Hole 52mm. Can install the spindle. Add spindle motor / laser module. Precision hole position CNC processing.
Buy It Now
Free Shipping
Condition: New Location: Ontario, United States
Specifications： SFU1605 ball screw set. Model: SFU1605. 2 x SBR20/16 Linear Rail. Material:100Cr6 (inductively hardened ≈ 60 HRC). SBR20/16Linear Guide Rail. Aluminum support rail with drilled M5 holes.
Buy It Now
Free Shipping
Condition: New Location: Milner, United States
Also includes 3pcs optical sensors that can be used as limit switches, and DC power connector pigtail. Note that these boards do not support microstepping due to the jumpers connecting the MS0,MS1,MS2 pins on the stepper drivers to GND rather than +5V.
Buy It Now
$62.00 Shipping
Condition: New Location: , China
1 pc Nema 23 stepper motor with 425 oz.in, 3A,4 leads 23HS9430. Part No.: 23HS9430. Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
0 bids Free Shipping
Condition: New Location: Chino, United States
Description： Complete Linear Rail Kit:2 X SBR20 1800mm fully supported linear rail,4 X SBR20UU motion router solide block bearing,16 X Screws,1 X Handles,1 X Wrenches PREMIER LINEAR GUIDING SYSTEM: Perfect combination of the main axle bearing rail and aluminum alloy support, which nicely stabilizes the original rail. Industrial-grade standard SBR block, with a high precision linear bearing inside. EASY TO USE: Aluminum alloy support rail with pre-drilled holes for ease of mounting. The linear guide rail can be applied to DIY CNC routers lathes and mills, Easy to install, no need to maintenance. .
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Nema 23 Stepper Motor;. 1pc 23nema Stepper Motor. Effective Stroke: 100mm. Current: 3A. 1pc Ball Screw Guide Sliding Table. Lead: 4mm (One Turn of the Screw Rod). Your satis faction is our ultimate goal.
Buy It Now
Free Shipping
Condition: New Location: , HK
3 x New 42BYGH47-401A Single-Shaft Stepper Motors 0.44 Nm/62 Oz-in/1.68A. Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors.
Buy It Now
$10.00 Shipping
Condition: New Location: , China
Applicable to:300w 400w 500w spindle motor. Drill chuck Spindle Arbor (Drill chuck Clamping range：1.5-10mm). Air Cooled Spindle Model: 52mm Spindle motor mount bracket. 3.52mm clamp Support mach3 function.
Buy It Now
Free Shipping
Condition: New Location: , HK
The Latest 3rd Generation Revolutionary & Professional TB6560 3 Axis Stepper Driver Set (TB3CD-P). of the computer, and thenrerun the recorded G-code to make the stepper motor work without the computer any more.
Buy It Now
$118.00 Shipping
Condition: New Location: , United States
3 PCS Nema 34 stepper motor with 460oz-in for Single sha ft ,4A. 3 PCS DQ860MA Stepper Driver with 80VDC,7.8A, 256 Microstep. 1, Stepper Motor. Hording torque when DQ860MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher.
|
|
|
|