|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: Burlington, United States
OEM Kaidi Power Recliner Lift Chairs Motor Actuator Model KDYJT018-130. The motor replaces Kaidi Model KDYJT018-130. Speed: 8mm/s.
Buy It Now
Free Shipping
Condition: New Location: Burlington, United States
This is OEM Kaidi Power Recliner Lift Chairs Motor Actuator Model KDPT005-144. Easy to install, Speed: 25mm/s, Max.load: 1500N. Speed: 25mm/s.
Buy It Now
Free Shipping
Condition: New Location: Memphis, United States
LFGUD Linear Rail Guide with 1or 2 MGN12H Carriage Blocks. The guide rail slider has the function of self-aligning, which can achieve long-lasting and stable UM-level precise positioning. Model: MGN12H.
0 bids Free Shipping
Condition: New Location: Burlington, United States
This is OEM Electric Recliner Couch Motor Actuator Part Number 452599 made by limoss. Part Number: 452599. 1x Limoss US Version AC Cable Cord. Easy to install, Max.load: Push:1000N, Pull:1000N.
Buy It Now
Free Shipping
Condition: New – Open box Location: Clearfield, United States
New open box
0 bids Free Shipping
Condition: New Location: Milwaukee, United States
Duty cycle: 1 minute "On", 4 minutes "Off".
Buy It Now
Free Shipping
Condition: New Location: Caribou, United States
Sealed cold weather actuator. Its our newest updated actuator! Plus you get all the hardware needed to mount the actuator to your chute. Simple wiring diagram is also included. The actuator toggle switch is included in the kit.
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
Whether for outdoor or industrial use, it provides exceptional protection. (Caution: Water should not penetrate the interior of the motor). (Caution: Water should not penetrate the interior of the motor, as it may result in motor burnout).
Buy It Now
Free Shipping
Condition: New Location: Memphis, United States
【Linear Rail Spec】- MGN12 300mm/400mm/700mm linear guide rail hole distance is 25mm, MGN12H carriage block hole distance is 20mm, and the bolt hole is M3. The guide rail slider has the function of self-aligning, which can achieve long-lasting and stable UM-level precise positioning.
Buy It Now
Free Shipping
Condition: New Location: Burlington, United States
The motor can replace the models of the JLDQ.19.377.195F series, such as the JLDQ.19.377.195F02. Model: JLDQ-19 JLDQ.19.377.195F01. Check label before ordering a motor, if your model number is different, it cannot be replaced.
Buy It Now
Free Shipping
Condition: New Location: Rowland Heights, United States
Model：HGR20. 2 x HGR20- 200/300/400/600/800/900/1000/1500/2000/2200mm. 4 x HGH20CA slide block. Length：200/300/400/600/800/900/1000/1500/2000/2200mm. |The linear rail can help build economical linear guiding system.
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
Experience durability and performance with VEVOR 12V linear actuator, boasting IP65 high protection for excellent resistance to dust and water. It's versatile and ready for various tasks. Automate your living and work with ease using our linear motion actuator.
Buy It Now
Free Shipping
Condition: New Location: Johnstown, United States
Ledex Saia Burgess. 5S Rotary Solenoid Actuator. SHAFT LENGTH.9.57MM. IF YOUR ITEM WEIGHS LESS.
Buy It Now
Free Shipping
Condition: New Location: Burlington, United States
Buy It Now
Free Shipping
Condition: New Location: Burlington, United States
Model:ML8 ML8-205C.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
1 x SFU1605 Sliding Table. the Sliding Table Is Convenient and Easy in Use, Can Be Directly Fold Cross Slide, Gantry Sliding Table, 3-Axis, 4-Axis, Multi-axis Combination in Use. the Sliding Table Is Equipped with Hand Wheel, and Lock.
0 bids Free Shipping
Condition: New Location: Burlington, United States
The motor can replace JLDQ.12.157.333G, rmt motor model R182301156333. Model: JLDQ.12.157.333K. 1x Recliner Motor Model JLDQ.12.157.333K. 1x Recliner Power Cable.
Buy It Now
Free Shipping
Condition: Used Location: Alviso, United States
Software and manuals are freely available on the Newport website. The CONEX-AGP closed-loop algorithm combined with the direct read linear encoder, provides a system uni-directional repeatability of 0.2 μm.
Buy It Now
Free Shipping
Condition: New Location: , United States
Stroke Linear Square Sliding Table. ★ M6 movable nuts are used on the sides and bottom to make the installation of the sliding table more flexible and changeable. Effective Stroke: 100-600mm. 1×Motor Mount Bracket (Without Motor).
Buy It Now
Free Shipping
Condition: New Location: Jacksonville, United States
Lenco Actuator connections use waterproof "Plug & Play" Deutsch connectors eliminating the possibility of water intrusion. 101 XD Actuator- 12 Volt- 2-1/4 Stroke with Mounting Hardware. The 101 XD Actuator is used mostly with HD, XD, High Performance and Super Strong tabs.
Buy It Now
Free Shipping
Condition: New – Open box Location: Pennsauken, United States
MODEL # ML7984A4009. DIRECT COUPLED VALVE ACTUATOR.
0 bids Free Shipping
Condition: New Location: Chino, United States
Linear Actuator. Stroke Length. 1PCS 50mm/2" Stroke 5.7mm/s Speed Linear Actuator. Multiple Purpose Applications Linear Actuator. Max Pull Load. Max Push Load. Agricultural machinery;. Want to buy other Stroke Length?.
Buy It Now
Free Shipping
Condition: Used Location: , KR
Model Number : BIF2005-5+610L BK15+BF15. Ball Screw Support Unit : BK15+BF15. Manufacturer : THK. Quantity : 1 Unit ( Screw + ball screw nut + Support Unit ). Ball Screw flange is big, so ball screw support block should be higher.
0 bids Free Shipping
Condition: Used Location: Millersburg, United States
Model LA10-12-027A. Information and Support. Part Number LA1012027A. If the item is listed with Flat Rate Freight. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
0 bids Free Shipping
Condition: New Location: Burlington, United States
Kaidi motor model kdpt007-02 can replace kdpt007-08, kdpt007-52, kdpt005-38, kdpt007-01, kdpt007-179. Speed: 55.5m/s.
Buy It Now
Free Shipping
Condition: New Location: Laporte, United States
HG Series blocks are designed with load capacity and rigidity higher than other similar products with circular-arc groove and structure optimization. HG features 4 way equal load capacity in the radial, reverse radial and lateral directions, and is self-aligning to absorb installation error.
Buy It Now
Free Shipping
Condition: New Location: Hainesport, United States
DC 12V Linear Actuator Heavy Duty Stroke 2"~40" 1000MM 3000N 660lbs Waterproof. POWERFUL-- This liner actuator is a good tool to extend stroke relatively. It can provide a pushing or pulling force of up to 3000N and a travel speed of up to3.5mm/s when under load.
Buy It Now
$12.99 Shipping
Condition: New Location: Statesville, United States
0 bids Free Shipping
Condition: New Location: Burlington, United States
OEM Kaidi Power Recliner Lift Chairs Motor Actuator Model KDPT007-11. Easy to install, Speed: 50mm/s, Max.load: 800N. Speed: 50mm/s.
0 bids Free Shipping
Condition: New Location: Burlington, United States
Buy It Now
Free Shipping
Condition: New Location: Burlington, United States
Model: ML18 ML18-005. The motor can replace ML18D06, ML18-005A and ML18D07 motor.
0 bids Free Shipping
Condition: New Location: Burlington, United States
OEM Kaidi Power Recliner Lift Chairs Motor Actuator Model KDPT009-01. Easy to install, Speed: 26mm/s, Max.load: 1000N. Speed: 26mm/s.
Buy It Now
Free Shipping
Condition: New Location: , China
POWERFUL-- This liner actuator is a good tool to extend stroke relatively. It can provide a pushing or pulling force of up to 400N(34-25MM/S ). FEATURE-- Standard protection level: IP65, safe to use.
0 bids Free Shipping
Condition: New Location: Chino, United States
Linear Actuator. 2PCS 350mm/14" Stroke DC 12V 5.7mm/s speed Linear Actuators. 4PCS Mounting Brackets W/ 4PCSbolt and 4PCS cotter pin for the linear actuator. Multiple Purpose Applications Linear Actuator.
Buy It Now
Free Shipping
Condition: New Location: Ventura, United States
2pcs WindyNation 20" Extension, 12 Volt, 225 lb Linear Actuator.
Buy It Now
Free Shipping
Condition: New Location: Burlington, United States
The Motor can replace Motor Model JLDQ.19.415.205D04. Load: 4000N, Speed: 7 mm/s. Speed: 7 mm/s.
0 bids Free Shipping
Condition: New Location: Anaheim, United States
Mounted to the desk front side. Color: Color of plastic key: Black, grey, blue, deep grey.
Buy It Now
Free Shipping
Condition: New Location: Los Angeles, United States
Maximum Load = 225lbs(1000N). The load added to the actuator must be less than or equal to the rated load of the actuator. Install an actuator so the force of the load acts in the center of the extension tube and the rear mounting adapter.
0 bids Free Shipping
Condition: New Location: Burlington, United States
KDPT007-03 Power Recliner Lift Chairs Motor Actuator is manufactured by Kaidi. Speed: 42 mm/s.
Buy It Now
Free Shipping
Condition: New Location: Bordentown, United States
Linear Actuator. Long Stroke Linear Actuator. Fast Speed Linear Actuator. Mirco MIni LInear Actuator. Reciprocating Linear Actuator. 1×12V Linear Actuator Motor;. POWERFUL-- This liner actuator is a good tool to extend stroke relatively.
Buy It Now
Free Shipping
Condition: New Location: , China
0 bids Free Shipping
Condition: New Location: Elk Grove Village, United States
1 4.02" Stroke Linear Actuator. Item Type: Linear Actuator. Stroke: 102 mm (4.02"). Quality is our top priority - this part is precision-engineered to exact factory standards, 100% tested for perfect fit.
0 bids Free Shipping
Condition: New Location: Azusa, United States
These mounting brackets are designed to make the installation of the actuators much easier and will allow the rotation of almost 180 degrees. They are designed to fit onto the both ends of the linear actuator.
Buy It Now
Free Shipping
Condition: New Location: Dayton, United States
Model: R811A. The motor can replace RMT Motor Model R8112/R811242375198.
0 bids Free Shipping
Condition: Used Location: Monmouth, United States
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
HGR20 / HGH20CA linear guide rail. 4×HGH20CA blocks. 2×HGR20 linear rails. Guide rail height: 17.5 mm. Guide rail width: 20 mm. Bearing steel. Length: 200 mm - 1500 mm. The number of steel ball rows is small, the friction is light and flexible, and the service life is long.
Buy It Now
Free Shipping
Condition: New Location: Rancho Cucamonga, United States
SXG5080: Industrial-grade linear slide with 60KG load capacity and 0.02mm accuracy, featuring dual MGN12 rails and 500mm/s speed for heavy-duty automation. GGP5080: Cost-effective dual-rod linear actuator with 40KG load and 0.05mm repeatability, ideal for compact CNC upgrades. DXG6042: Ultra-fast 500mm/s linear stage in 42mm width, perfect for high-speed pick-and-place applications.
Buy It Now
Free Shipping
Condition: New Location: Fort Smith, United States
Buy It Now
Free Shipping
Condition: New Location: Hainesport, United States
Linear Actuator 12V Heavy Duty Waterproof Stroke 2"~40" 1000MM 3000N 660lbs. 1×12V Linear Actuator Motor;. POWERFUL-- This liner actuator is a good tool to extend stroke relatively. It can provide a pushing or pulling force of up to 3000N and a travel speed of up to 3.5 mm/s when under load.
0 bids $20.00 Shipping
Condition: Used Location: Wenatchee, United States
Buy It Now
$45.00 Shipping
Condition: New – Open box Location: , KR
Manufacturer : HIWIN. ■ NUT Length = 60 mm. This item is surplus one, not used item. Country Of Origin : TAIWAN. · EMS : Commonwealth of Independent States (CIS-Russia, Ukraine…. ).
Buy It Now
Free Shipping
Condition: New Location: Hainesport, United States
POWERFUL-- This liner actuator is a good tool to extend stroke relatively. It can provide a pushing or pulling force of up to 120N(56mm/s), 250N(28mm/s), 700N(15mm/s), 2000N(5mm/s). Linear Actuator.
0 bids Free Shipping
Condition: New Location: Cranbury, United States
2PCS silver mounting brackets with pin and cotter pin together. These are designed to fit easily onto either end of the actuator with a pin and cotter pin. Want to buy our Linear Actuators?. This bracket provides easier installation, and allows for nearly 180 degrees of rotation.
Buy It Now
Free Shipping
Condition: New Location: Hainesport, United States
Long Stroke Linear Actuator. 6000N Linear Actuator. Heavy Duty Linear Actuator. Fest Speed Linear Actuator. Mini Micro Linear Actuator. For Linear Actuator. POWERFUL-- This liner actuator is a good tool to extend stroke relatively.
Buy It Now
Free Shipping
Condition: New Location: Burlington, United States
The motor can replace Motor Model DL-DT2001-160-01, can not replace other motor model DL-DT2001. Minimum install size: 347mm/13.66in, Stroke: 173mm/6.81in, Max. Load: Push 6000N.
0 bids Free Shipping
Condition: New – Open box Location: North Salt Lake, United States
Buy It Now
Free Shipping
Condition: New Location: Rancho Cucamonga, United States
【Self locking function】When the Z-axis moves vertically and the screw stops rotating, the moving panel will lock itself and not slide down, ensuring safety and reliability. 【EASY TO USE】The linear motion actuator is convenient, simply driven by the rotating handle, the movement stroke is from 0 to 75mm, and the stable movement has high accuracy. 【PRACTICAL】Commonly Used in Automotive, home furniture, medical devices, industrial construction and agricultural machinery area, like massage recliners, electric wheelchairs, hospital hydraulic beds, massage tables, electric sofa and so on.
0 bids Free Shipping
Condition: New Location: San Leandro, United States
Linear Actuator. Max Pull Load. Max Push Load. Multiple Purpose Applications Linear Actuator. Agricultural machinery;. Operation Temperature. Duty Cycle. Max load Current.
0 bids Free Shipping
Condition: New Location: Burlington, United States
This is OEM Kaidi Power Recliner Lift Chairs Motor Actuator Model KDYJT018-51. Easy to install, Speed: 40mm/s, Max.load:1000N. Speed: 40mm/s.
0 bids Free Shipping
Condition: New Location: Burlington, United States
This is OEM Kaidi Power Recliner Lift Chairs Motor Actuator Model KDYJT006-20. Easy to install, Speed: 36mm/s, Max.load: 800N. Speed: 36mm/s.
|
|
|
Specification Model Number: BLK1616 Manufacturer: THK Country Of Origin: Japan. Quantity: 1 Unit. Condition: Used(good working condition- cosmetic is good too) Screw Type: Rolled Ball Screw. Main Size(Metric) Shaft Diameter = 16mm Lead(Pitch- distance by 1 rotation) = 16 mm Nut Diameter = 32 mm Nut PCD = 42 mm NUT Length = 38 mm Overall Length: 695mm Screw Length: 630mm Motor Side(Fixture Part) diameter for coupling: 10mm Motor Side(Fixture Part) diameter: 12mm(applicable to EK12. BK12, FK12, AK12) Support Side diameter: 10mm(applicable to EF12.BF12,FF12,AF12) Ball Screw Support Unit: EK12+EF12 This item include Ball Screw nut Bracket. Must Read Length of Ball Screw. There can be a difference of 1~2mm. The ball inside the Ball Screw Nut. Can fall if you eject the Nut from Screw The frequently ... moreused part was discolored. Check the screw part at picture. Rolled Ball Screw have backlash at origin condition. If you want no-backlash type screw. Then we recommend ground type ball screw or double nut preload type. D on't eject the screw nut from the screw. Review catalog image Main dimension. Machined part is not same as catalog image. Applications: for linear motion. Factory Automation system. This is not suitable for precision motion. As CNC or zero-backlash system. The Serial Number may be different from actual. But the quality of item is almost equal. If You Want. If you want review actual item then request actual image before buying. Send message. You c an purchase more quanti ty of goods. Please message to us. Actual item quantity is more exist. If you have any questions about product or shipping method. Send message us and we will help your business with pleasure. Shipping Notice: We Use shipping address by PAYPAL Information. Since it is an international flat rate shipping. It usually takes 15 to 30 days to deliver. Sometimes it takes more than usual. Please understand it depends on the customs and post office of your country. But please don't worry. Most of the shipping it is deliver
|
|
SquareTrade © AP6.0 NOVOTECHNIK ELECTRIC 18" 450MM POSITION TRANSDUCER LWH 450 E This is a Fixed Auction for a Novotechnik Electronic 18" 450MM Electric Position Transducers. Model#LWH 450 E. LWH transducers are designed for the direct. Absolute measurement of displacement or length in control regulation and measuring applications. High resolution(0.01 mm) combined with a stroke length of up to 900 mm permits the accurate measurement of linear displacement. Rack and pinions or similar devices are not required because the design of the transducers is such that they may be built directly into the mechanical system. Tighter tolerances on the extruded body combined with a special surface treatment permit high operating speeds and reduced wear. A pivoting front bearing over comes ... morestick-slip operation even where some angular or out of parallel errors are present. The technique for fixing and making connections to the resistance track ensures the highest degree of reliability even under harsh working conditions. The transducer has mounting grooves on all four housing surfaces. Thus the transducer can always be mounted with the resistance element directed upwards(recognizable by the position of the middle mounting groove directly across from the resistance element) Independent of the mounting surface. By mounting overhead on difficult-to-reach machines it is possible to premount the clamps to the mounting surface and then simply snap-on the transducer. Defined electrical range- 450mm Electrical stroke- 457mm For more information see: http:www.novotechnik.com/catalogs/pdfs/LWH.pdf I will fully guarantee this item. Many more sizes available- see my other auctions. Shipping in the Continental US is $9.90- I have very competitive rates for our always welcomed International bidders. Thanks for looking! If you have any question on this item please call us at 1-800-826-3433(9- 5pm Eastern) Pay me securely with your Visa or MasterCard through PayPal! Powered by lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jt
|
|
G100207 Bell-Everman Motorized Positioning Linear Stage w/Ball-type Lead-screws(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# G100207 This Bell-Everman Motorized Positioning Linear Stage with Ball-type Lead-screws and“ServoNut Power Modules” These are zero backlash driven-nut ball-screw linear actuators, appears to be in very good cosmetic condition PROBABLY UNUSED. Please look at the photos. I have no way to power-up or test it; therefore I am obligated to list this unit as“Not Working” Both axes have approximately 28” inches of travel. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this ... moreitem so it is being sold as is. The unpacked dimensions of this item are 48“inches x 48“inches x 21“inches. The following webpage is the manufacturer’s description of the ServoNut Power Module. Please have a look. http:bell-everman.com/products/actuators/servonut-power-module Due to the size/weight of this item. Freight shipping arrangements will be required. Freight Shipments: Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this timeframe, the rate will expire. We reserve the right to re-quote the freight charges in the event of a payment delay. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 235.00 Pounds Buyer pays freight plus a fixed handling fee of $25.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. To avoid invoicing delays on freight it
|
|
G100206 Bell-Everman Motorized Positioning Linear Stage w/Ball-type Lead-screws(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# G100206 This Bell-Everman Motorized Positioning Linear Stage with Ball-type Lead-screws and“ServoNut Power Modules” These are zero backlash driven-nut ball-screw linear actuators, appears to be in very good cosmetic condition PROBABLY UNUSED. Please look at the photos. I have no way to power-up or test it; therefore I am obligated to list this unit as“Not Working” Both axes have approximately 28” inches of travel. Item comes exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment ... moreor training to formally test this item so it is being sold as is. The unpacked dimensions of this item are 48“inches x 48“inches x 21“inches. The following webpage is the manufacturer’s description of the ServoNut Power Module. Please have a look. http:bell-everman.com/products/actuators/servonut-power-module Due to the size/weight of this item. Freight shipping arrangements will be required. Freight Shipments: Freight rate quotes are valid for 10 calendar days from the date quoted. If a cleared payment has not been received in this timeframe, the rate will expire. We reserve the right to re-quote the freight charges in the event of a payment delay. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below. Shipping LTL Freight. The unpacked weight of this item is 235.00 Pounds Buyer pays freight plus a fixed handling fee of $25.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) Freight charges are prepaid and will be billed based on the buyers confirmed shipping address. T
|
|
|
Pull from tester. Good shape, 14" stroke, 24VDC.
|
|
|
You are bidding for 1 set Kuroda linear. Used before. PS: Have many other item for sell. Buy more will get more offer& we do combine shipment. Please ask. Kindly contact seller for more information Terms and Conditions: ✔ Payment only make by Paypal. ✔ All item will be send out within 5 days after payment made ✔ Item will ship out by Air Register Mail with Tracking No. It take 10-15 business days for delivery(check online) ✔ We will Not responsible for goods damaged during transit. But we will try our best on Packing) ✔ You bidding/buying mean you are agreed with above Terms& Conditions. Thank You for viewing our listing Check out our! Be sure to add me to your!
|
|
YOU ARE BUYING ONE THOMSON 20" LINEAR SHAFT W/ TWO SPB8OPN SPB 8 OPN PILLOW BLOCK BEARINGS 1/2" TWO LINEAR PILLOW BLOCK BEARINGS WITH 1/2" BORE. 2" OVERALL WIDTH, 1-1/2" OVERALL LENGTH, AND 1-1/4" OVERALL HEIGHT. CENTER TO CENTER MOUNTING MEASURES 1-1/8" X 1-3/4" OPEN TYPE BEARINGS. ALUMINUM BEARING, STEEL SHAFT. THIS UNIT WAS PULLED FROM A CLEAN WORKING MACHINE AND WE HAVE MORE THAN ONE OF THESE ASSEMBLIES AVAILABLE TO SELL ON EBAY. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156, OR HIT ASK THE SELLER A QUESTION. G5SHELVES, X12 UNITS TOTAL) Estimated Retail Price: $140.78 EACH BEARING International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. ... morePlease check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my other items! Be sure to add me to your favorites list!
|
|
|
USED VALVE INFO: 316s/s SHAFT AND BODY MAX PRESS275 PSIG@ 50 DEGREES F. ACTUATOR INFO: MIN PRESS 60(4.1) PSI MAX PRESS 100(6.8) PSI SWITCH INFO: TAG ISNT READABLE APPROX SHIP WEIGHT:70LBS INTERNATIONAL BUYERS-PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COST WILL BE PRIOR TO BIDDING or BUYING. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. PLEASE CONTACT US FOR OTHER SHIPPING QUOTES. KS Powered by The free listing tool. List your items fast and easy and manage your active items. 37,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28d03%3C%3E37-13ed462b034-0xf1-
|
|
|
There are 14 of the longer 3H models. And 6 of the shorter 3F models. They are all used. Some look new, others may have some light scratches or dings, and most of the smaller ones are ink-stained. These magnets are EXTREMELY powerful, and should be handled with caution. They will need to be well insulated from each other and any metal surfaces for shipping.
|
|
YOU ARE BUYING ONE TOL-O-MATIC 09100006 RODLESS PNEUMATIC ACTUATOR CYLINDER 14" STROKE. BND A 21.850. BND B 21.790. THIS WAS REMOVED FROM A WORKING MACHINE AND IS GUARANTEED NOT D.O.A. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156, OR HIT ASK THE SELLER A QUESTION. G5SHELVES) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure to add me to your! Feedback tools provided ... moreby ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13f0a8bba06-0xff-
|
|
YOU ARE BUYING ONE THK 30" LINEAR RAIL WITH SR15W BEARING BLOCK SR SERIES LM GUIDE. THIS BEARING AND GUIDE ASSEMBLY WAS REMOVED FROM A WORKING SYSTEM AND IS GUARANTEED TO FUNCTION PROPERLY. IF THERE ARE ANY QUESTIONS PLEASE CALL 480-200-0156. OR HIT ASK THE SELLER A QUESTION. G5) Estimated Retail Price: $120 RAIL Estimated Retail Price: $79 BEARING International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. ... moreTHE FOLLOWING IS FOR INFORMATION PURPOSES ONLY AND MAY NOT BE INCLUDED IN THIS AUCTION: FOR MORE SPECIFICATIONS SEE: https:tech.thk.com/en/products/get_all_attributes.php?id=3670 Type of guide Loading method Block mounting direction Ball(roller) retainer Ball Cage(Caged Roller) Ball Radial Type Top surface mount Yes None Radial Type Model SR Since it is a compactly designed model that has a low sectional height and a ball contact structure capable of receiving a large load in the radial direction. This LM Guide is optimal for horizontal guide units. SR-V A space-saving type whose LM block has the same cross-sectional shape as model SR-W. But has a smaller overall LM block length(L)
|
|
YOU ARE BUYING ONE THK 24-3/4" LINEAR RAIL WITH SR15V BEARING BLOCK. THIS BEARING AND GUIDE ASSEMBLY WAS REMOVED FROM A WORKING SYSTEM AND IS GUARANTEED TO FUNCTION PROPERLY. IF THERE ARE ANY QUESTIONS PLEASE CALL 480-200-0156. OR HIT ASK THE SELLER A QUESTION. G5) Estimated Retail Price: $100 RAIL Estimated Retail Price: $68.00 BEARING International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. THE FOLLOWING ... moreIS FOR INFORMATION PURPOSES ONLY AND MAY NOT BE INCLUDED IN THIS AUCTION: FOR MORE SPECIFICATIONS SEE: https:tech.thk.com/en/products/get_all_attributes.php?id=3670 Type of guide Loading method Block mounting direction Ball(roller) retainer Ball Cage(Caged Roller) Ball Radial Type Top surface mount Yes None Radial Type Model SR Since it is a compactly designed model that has a low sectional height and a ball contact structure capable of receiving a large load in the radial direction. This LM Guide is optimal for horizontal guide units. SR-V A space-saving type whose LM block has the same cross-sectional shape as model SR-W. But has a smaller overall LM block length(L)
|
|
YOU ARE BUYING ONE THK 26-5/8" LINEAR RAIL WITH TWO SR15V BEARING BLOCKS. THIS BEARING AND GUIDE ASSEMBLY WAS REMOVED FROM A WORKING SYSTEM AND IS GUARANTEED TO FUNCTION PROPERLY. IF THERE ARE ANY QUESTIONS PLEASE CALL 480-200-0156. OR HIT ASK THE SELLER A QUESTION. G5) Estimated Retail Price: $107.00 RAIL Estimated Retail Price: $68.00 BEARING EACH International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. ... moreTHE FOLLOWING IS FOR INFORMATION PURPOSES ONLY AND MAY NOT BE INCLUDED IN THIS AUCTION: FOR MORE SPECIFICATIONS SEE: https:tech.thk.com/en/products/get_all_attributes.php?id=3670 Type of guide Loading method Block mounting direction Ball(roller) retainer Ball Cage(Caged Roller) Ball Radial Type Top surface mount Yes None Radial Type Model SR Since it is a compactly designed model that has a low sectional height and a ball contact structure capable of receiving a large load in the radial direction. This LM Guide is optimal for horizontal guide units. SR-V A space-saving type whose LM block has the same cross-sectional shape as model SR-W. But has a smaller overall LM block length(L)
|
|
C100064-P54 Finn Tools Assy Dover Air Slide Linear Stage RSF Elektronik Encoder(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# C100064 This Finn Tools& Instruments Assembly features a Dover Air Slide Linear Stage and an RSF Elektronik 665RI Linear Encoder. As shown. It looks to be in good cosmetic condition, showing some signs of wear. The stage slides smoothly from side to side. However, this is the extent of my testing of this assembly, and it is being sold as-is. It provides about 7 inches of travel. Approximate overall unpacked dimensions: 18"L x 14"W x 9"H. P54. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as ... moreadvertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $104.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 64.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Canada Verified with ship-to US and Canada confirmed addresses only. We accept credit card payments through confirmed/verified Paypal accounts only. California Sales
|
|
Specification Model Number: HSR15R Manufacturer: THK Country Of Origin: Korea(THK is global manufacturer. So this product was produced in korea) Quantity: 1SET(2Rail. 4Blocks) Condition: Used(good working condition) Cosmetic is not perfect- check photo. LM Guide Type: Ball Type. Main Size(Metric) Height(Rail Combination with Block) = 28 mm Width(Block width) = 34 mm Wi dth(Rail width) = 15 mm Block upper surface fastening dimension = 26mm X 26mm Rail hole pitch: 60mm Rail hole size: 4.5mm X 7.5mm X 5.3mm(check catalog image) Length of track rail: 520mm. G value( A distance of the rail that end of the rail to the first hole) G:20mm. 20mm Pitch of rail: 20 +( 60 X 8times) + 20 Length of track rail. There can be a difference of 1~2mm. The ball inside the block. Can fall if you eject the block ... morefrom rail. P referably. Don't eject the block from the rail. But. Don't worry. The ball does not fall naturally, because block's angle holding the ball inside the block. This Product rail was processed"RAYDENT" for anti rust. RAYDENTed" product are usually black or dark gray color. The rail has scratch. But the scratch does not affect the movement of the block. The Rail and block's Serial Number may be different from actual. But the quality of item is almost equal. Compatible Table Other makers products that are compatible with this product for MAIN DIMENSION- HSR15R) Type Maker Country Of Origin HSR15R. THK. Japan. Korea SHS15R. THK. Japan. LH15AN. NSK. Japan. LWHD15. IKO. Japan. MSA15S. PMI. Taiwan. BRH15R. ABBA. Taiwan. SBG15SL. SBC. Korea. R1621 1. Rexroth Bosch(STAR) Germany. HGH15CA. Hiwin. Taiwan. But. Other maker of rail and other maker's block is not compatible. Mutually exclusive) Applications: for linear motion. Factory Automation system. CNC route If You Want If you want review actual item then request actual image before buying. Send message. You c an purchase more quanti ty of goods. Please message to us. Actual item quantity is more exist. If you have any questions ab
|
|
PLEASE SEE PICTURES FOR MORE DETAILS] Jash-AL 6/3/13(0418-1) VERY IMPORTANT INFORMATION… PLEASE READ CAREFULLY: ALL UNPAID ITEMS WILL OPEN UI CASES AFTER 7 DAYS FEEDBACK Your feedback is greatly appreciated! We are more than happy to leave our customers feedback for each transaction. If you feel as though you have not had an excellent experience with us. Please contact us via eBay Messages prior to leaving negative feedback.We are more than happy to work with you to the best of our abilities to resolve any and all issue that you may have had with our transaction. RETURNS We have a 30-day 100% money-back guaranty on all items. If you need to return an item. Please contact us via eBay Messages within 30 days and we guaranty that we will take care of the issue in a timely manner. Returns must ... morebe received in the same condition as they were sent in. As per eBay policy, we will issue a refund upon receipt and processing of the returned item. Please allow at least one business day(Monday through Friday) for your return to be precessed. SHIPPING We ship 5 days a week(Monday through Friday) We will always ship the fastest and most economical way possible in order to get your item(s) to you as quickly as possible.We use USPS First-Class Mail and USPS Priority Mail for most items. And we will generally use UPS Ground service for larger items. All standard service shipping is free to the 50 United States although Alaska, Hawaii and US Territories MAY require additional shipping fees. You will be contacted via eBay Messages in the rare occurrence that additional handling charges are necessary. PLEASE SEE NEXT DAY AIR INFORMATION BELOW! NEXT DAY AIR/ EXPRESS SHIPPING DOMESTIC Next Day Air shipping can be arranged. If you wish to have an item shipped via Next Day Air you must contact us via eBay Messages NO LATER THAN 1:00pm(Pacific Time) There are two ways that we can handle Next Day Air sh
|
|
YOU ARE BUYING ONE THK SR25W BEARING 3" LONG X 1 7/8" WIDE X 1" TALL WITH 5 7/8" LINEAR RAIL. THIS IS USED SURPLUS REMOVED FROM A WORKING SYSTEM AND IS GUARANTEED WORKING. IF YOU HAVE ANY QUESTIONS PLEASE CALL 480-200-0156 OR HIT ASK THE SELLER A QUESTION. MWUPGR6) ESTIMATED RETAIL PRICE $119.00(BEARING ONLY) International Buyers Please Note: Import duties. Taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. We do not mark merchandise values below value or mark items as"gifts" US and International government regulations prohibit such behavior. Check out my! Be sure ... moreto add me to your!
|
|
Infloor 24 VAC Actuator Motor ESBE 30014 Weight: 1 lbs UPC: 724689300144(DH111 L2) We strive to deliver 5-star customer service. Bid with confidence! We Ship UPS GROUND to United States& Worldwide. Large items will ship Truck Freight. Contact us for rate quotes. You will need a forklift to unload. Lift gate is available at an additional charge. You are welcome to pickup at our NJ facility. M-F 8AM-5PM& SAT 8-NOON. The buyer is responsible for all shipping& handling costs. Shipping costs are determined by your zip code& item weight. SHIPPING WILL NOT TAKE PLACE UNTIL PAYMENT IS RECEIVED. ATTENTION INTERNATIONAL BUYERS: Please provide a phone number and shipping address. Do not forget about any additional charges which are charged by the carrier. This is somthing we have no control ... moreover and is an additional charge to the shipping. WE DO NOT ACCEPT RETURNS. ITEMS ARE SOLD"AS IS" IF FOR SOME REASON YOU RECIEVE SOMETHING THAT DOSENT RESEMBLE THE PHOTOS AND DESCRIPTION IN THE LISTING WE WILL MAKE AN EXCEPTION. AUCTIONS WITHOUT A BID MAY END AT ANY TIME AS THE ITEMS ARE ALSO FOR SALE AT OUR LOCAL FACILITIES. WE ACCEPT PAYPAL PAYMENTS AND CREDIT CARDS(VISA/ MASTER CARD/ DISCOVER) PLEASE NOTE THAT WE ARE NOT AN AUTHORIZED DEALER FOR ANY OF THE ITEMS WE LIST ON EBAY. THEREFORE WE DO NOT GUARANTEE THAT THE ITEM FEATURED IN THIS LISTING WILL BE COVERED BY THE MANUFACTURER'S WARRANTY OR SUPPORT. HOWEVER. CUSTOMER SATISFACTION IS VERY IMPORTANT TO US. PLEASE FEEL FREE TO SEND US AN EMAIL OR A MESSAGE THROUGH EBAY WITH ANY QUESTIONS, COMMENTS, OR CONCERNS. BUYERS: CHECK OUR FEEDBACK AND BID WITH CONFIDENCE. SHOULD A PROBLEM ARISE PLEASE CONTACT US BEFORE LEAVING NEUTRAL OR NEGATIVE FEEDBACK; THIS WILL ALLOW US TO WORK WITH THE BUYER TO RESOLVE ANY PROBLEMS. BY PHONE: Call(856) 881-3185. Monday thru Friday 8:00 am to 4:30 pm EST, to speak with a Customer Service representative who can help you with any questions regarding your order. To place an order by phone. Please call(856) 881-3185 Monday thru
|
|
|
IKO LWLG9 B linear rail with 2 blocks. Overall length approximately 30.75 inches long. Great condition. Clean rail, moves smoothly be snug. This rail would be perfect for a CNC laser flying optic setup like those seen on Epilog engravers.
|
|
Item: Linear Bearings Manufacturer: THK Country Of Origin: Japan Quantity: 2rails& 4blocks(Lot of 2) Overall Height(Rail Combination with Block) = 16 mm Rail width = 15 mm Rail length = 419 mm- FREE SHPPING FEE. CONDITION- TAKEN FROM A WORKING EQUIPMENT-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost ... moreis not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
This item is a Vacuum Generators stepper motor controlled screw drive precision linear actuator pulled from a working plant. This item has not been tested.
|
|
ebay template We answer all e-mails, Monday to Friday 8am- 5pm est. Please contact us using"Ask a question" link at the bottom of this page. You are bidding on one Bilmo AF24-SR US Failsafe Spring Return Damper Actuator with the following specifications: QTY: 1• Manufacturer: Bilmo• Part Number: AF24-SR US Item Features: 24 Volts: AC Or DC• Rating: 10VA No testing Done Cosmetic Damage: Scratches and markings Unfortunately. We do not offer local pickup on this item. This purchase can be made with complete confidence because we offer a 14 day. Money back guarantee. This item is used and untested; we unfortunately do not have the means to test for power. Fit and function; therefore, we cannot guarantee it will operate as intended. This item will ship from our Lecanto. FL facility. Please ... morebid accordingly. Our shipping carriers are UPS and USPS. Any orders of $250.00 or more will be shipped with Signature Required. Please make sure you are available to sign for these orders. We ship Monday-Friday. Please allow up to 3 days after payment is received for shipment. We ship to the Continental US on all of our auctions. For items shipping freight. You will be responsible for arranging the freight shipment. Please contact customer support for accurate weight and dimensions. Buyer is responsible for shipping insurance. Some items are shipped to Canada and/or Overseas. We ship up to 75 pounds overseas via USPS. You are responsible for all customs fees and duties. Please read the auction description. Buyer is responsible for import fees/tax/duties. We will not mark your purchase as a gift. Please contact your local customs office for costs. Our UPS rates are strictly from the UPS calculator; we do not generate shipping costs. We do not offer local pick up. We only accept PayPal for payment. This auction only includes what is shown in the photographs. If it is not shown. Please assume it is not included. All manufacturers' warranties are void unless otherwise stated. Please bid accordingly. If you have any questio
|
|
|
C9391 Anorad Model 8-97 Linear Positioning Stage- Stage is 5-3/8" wide by 9-3/4" long- Untested. Please review all the pictures. They are part of the description. We combine shipping whenever possible. Not responsible for customs charges.
|
|
Tol-O-Matic 05100709#353235 SK10 Pneumatic Linear Slide 10 1/4" Travel From our inventory. We are selling a Tol-O-Matic 05100709#353235 SK10 Pneumatic Linear Slide 10 1/4" Travel. Specifications: Model# 05100709#353235 SK10 More Information: Tavel: 10 1/4" Carriage Dimensions: 4 3/4" x 1 1/4" x 2 3/4" Height ST28-3-B 5 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. ... moreShipping Weight: 5 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonabl
|
|
Tol-O-Matic 05100739#349777 SK4 Ball Screw Slide 4 1/4" Travel 1/4" Shaft From our inventory. We are selling a Tol-O-Matic 05100739#349777 SK4 Ball Screw Slide 4 1/4" Travel 1/4" Shaft. Specifications: Model# 05100739#349777 SK4 More Information: Travel: 4 1/4" Carriage Dimensions: 4 3/4" x 1 1/4" x 2 3/4" Height Shaft Diameter: 1/4" Pitch: Approx. 0.125" per Turn ST28-3-B 5 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged ... morebeyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 5 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment per eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am-
|
|
Specification Model Number: SR20V(compatible with SSR20XV) Manufacturer: samick THK Country Of Origin: Korea(THK is global manufacturer. So this product was produced in Korea) Quantity: 1SET(2Rail. 4Blocks) LM Guide Type: Ball Type. Main Size(Metric) Height(Rail Combination with Block) = 28 mm Width(Block width) = 42 mm Wi dth(Rail width) = 20 mm Block upper surface fastening dimension = 32mm Rail hole pitch: 60mm Rail hole size: 6mm X 9.5mm X 8.5mm(check catalog image) Length of track rail: 900mm. G value( A distance of the rail that end of the rail to the first hole) G:30mm. 30mm Pitch of rail: 30 +(60 X 14times) + 30 Length of track rail. There can be a difference of 1~2mm. The ball inside the block. Can fall if you eject the block from rail. P referably. Don't eject the block from ... morethe rail. But. Don't worry. The ball does not fall naturally, because block's angle holding the ball inside the block. There is some rust mark surface of rail. But the scratch is not related with the block motion. Compatible Table Other makers products that are compatible with this product for MAIN DIMENSION- SR20V) Type Maker Country Of Origin SR20 V THK. Japan(Korea) SSR20X V THK. Japan. LS20 CL NSK. Japan. LWES C 20 IKO. Japan. MS B20 T S PMI. Taiwan. BR S20 V ABBA. Taiwan. SB S20S V SBC. Korea. R16 6 4 8 Rexroth Bosch(STAR) Germany. EGH20 S A Hiwin. Taiwan. U20SER. TSUBAKI. Japan. But. Other maker of rail and other maker's block is not compatible. Mutually exclusive) Applications: for linear motion. Factory Automation system. 3D Printer. CNC route If You Want If you want review actual item then request actual image before buying. Send message. You c an purchase more quanti ty of goods. Please message to us. Actual item quantity is more exist. If you have any questions about product or shipping method. Send message us and we will help your business with pleasure. Shipping Notice: We Use shipping address by PAYPAL Information. Since it is an international expedited rate shipping. It usually
|
|
|
THK RSR15WV 385mm Rail width: 42mm/ rail height: 9.5mm Rail length: 385mm Block size: 60x54mm overall height: 16mm 1 Rail + 2 Bearings Used item. Photos show the actual items you'll receive. Thank you for visiting! i000000. 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-13f1380703d-0xf5-
|
|
|
Auction Wizard 2000 Listing Template- AW2KLOT#713 This auction is for a US Government Surplus Simmonds Precision Motion Controls Electro-Mech Actuator. This unit looks to be in good condition with only minor scratches and scuffs from regular usage. This item comes with only what is shown in the photos. No additional accessories are included. The data tag reads: Designation: 4P94303-101 SN: 0084 PN: DL1431M1-1 Spec. 41612 DSGN Code: 12511 Stock No. 1680-00-133-6072 Contract: 509603-03-D-0146-0001 This item has not been tested because we don't have the proper equipment to test it. Therefore, we must sell item as is for parts and or repair.
|
|
Lead Screw 32.75"L 30"Screw 3/8"Screw-Diameter 1/4"End 0.125"Pitch From our inventory. We are selling a Lead Screw. Specifications: 32.75"L x 3/8 Screw Diameter 1/4" Diameter End 0.125" Pitch ST37-4 3 lbs D&S Machined Products focuses strongly on quality of items that we sell. Thats why we created a rating system based on a 1 to 10 scale. 1 being the absolute worst condition. And 10 being brand new. D&S Machined Products will not sell any item that we feel is below a 7 on our rating system. Because of our limit on lower quality items, you will not find damaged beyond repair items in our inventory. If you have any questions. Please ask. Shipping Weight: 3 lbs. To calculate shipping. Payment Types We are only allowed to accept PayPal as payment ... moreper eBays policy. However. You can use a Credit Card through PayPal as a one time payment. Paying w/o a Paypal Account Combining Items Almost all orders can be combined. Please contact us if you are bidding on multiple items that end on different days. That way we can invoice you correctly. When purchasing multiple quantities of the same item. Select the amount you want, click buy it now, confirm your purchases, and then when you are done buying all of your items ask for a total and then we will send you an invoice to pay. By bidding on and/or buying this item from D&S Machined Products. You are agreeing to the following policies: The buyer accepts all import taxes and duties for international orders. D&S Machined Products. Nor it's employees will be held responsible for accidental or intentional use or misuse occurring with this item. Any returns on items purchased from us must be addressed within 2 weeks of receiving the item. Mail: D&S Machined Products 9472 Hemlock Lane N. Maple Grove. MN 55369 USA Monday- Friday(8:30am- 5:00pm) PHONE: 763)493-6305 FAX: 763)493-5782 eBay: Please allow a reasonable amount of time for your package to be shipped and arrive. Keep in mind that we are shipping industrial items
|
|
Questions? Call us: 1-877-328-9236. Thomson TWN 12 ADJ Pillow Block Linear Bearings Stainless 2 Ea 11" Rod Shaft. Manufacturer: Thomson Industries Model: TWN 12 ADJ Condition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: Thomson Industries Condition: Used. Comes in non-original packaging. The pillow block bearings are in good condition. Notes: No testing was performed. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 2) Thomson TWN 12 ADJ Pillow Block Linear Bearings Stainless Rod Shaft, Specifications: Manufacturer: Thomson Industries, Model: TWN 12 ADJ, 11" rod length Nominal Diameter: 0.75in Recommended Shaft: 3/4 L Dynamic Load Capacity(lbf) 1200 SKU: N23N008 For questions regarding this item. ... morePlease reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local pick up is available for buyers a
|
|
Specification Item Number: LE15AL Manufacturer: NSK Country Of Origin: Japan. Quantity: 1SET(2Rail. 4Blocks) LM Guide Type: Ball Type. Main Size(Metric) Height(Rail Combination with Block) = 16 mm Width(Block width) = 60 mm Wi dth(Rail width) = 42 mm Block upper surface fastening dimension = 45mm X 20mm Rail hole pitch: 40mm Rail hole size: 4.5mm X 8mm X 4.7mm(check catalog image) Length of track rail: 350mm. G value( A distance of the rail that end of the rail to the first hole) G:15mm. 15mm Pitch of rail: 15 +(40 X 8times) + 15 Length of track rail. There can be a difference of 1~2mm. The ball inside the block. Can fall if you eject the block from rail. P referably. Don't eject the block from the rail. When the block move fast. The block carriage makes some noise. There is some scratch ... moresurface of rail. But the scratch is not related with the block motion. The Serial Number may be different from actual. But the quality of item is almost equal. Applications: for linear motion. Factory Automation system. CNC route If You Want If you want review actual item then request actual image before buying. Send message. You c an purchase more quanti ty of goods. Please message to us. Actual item quantity is more exist. If you have any questions about product or shipping method. Send message us and we will help your business with pleasure. Compatible Table Other makers products that are compatible with this product for MAIN DIMENSION- LE15AL) Type Maker Country Of Origin LE15. NSK. Japan. 0443 5 Rexroth Bosch(STAR) Germany. SRS15WM. THK. Japan. RSR15WZM. THK. Japan. RSR15WVM. THK. Japan. LWL42BCS. IKO. Japan. LWL42CS. IKO. Japan. PE15. NSK. Japan. MR15WN. CPC. Taiwan. MGW15C. Hiwin. Taiwan. But. Other maker of rail and other maker's block is not compatible. Mutually exclusive) Shipping Notice: We Use shipping address by PAYPAL Information. Since it is an international flat rate shipping. It usually takes 15 to 30 days to deliver. Sometimes it takes more than usual. Please understand it dep
|
|
|
THK RSR9M 155mm Rail width: 9mm/ rail height: 5.5mm Rail length: 155mm Block size: 30x20mm overall height: 10mm 2 Rails + 2 Bearings Used item. Photos show the actual items you'll receive. Thank you for visiting! i000000.
|
|
|
THK RSR12WV 310mm Rail width: 24mm/ rail height: 6mm Rail length: 310mm Block size: 44x40mm overall height: 14mm 1 Rail + 2 Bearings Used item. Photos show the actual items you'll receive. Thank you for visiting! i000000.
|
|
|
THK RSR12VM 453mm Rail width: 12mm/ rail height: 7.5mm Rail length: 453mm Block size: 35x27mm overall height: 13mm 2 Rails + 4 Bearings Used item. Photos show the actual items you'll receive. Thank you for visiting! i000000. Di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-13f29a75408-0xf4-
|
|
THK Model: RSR 20M(2) LM Blocks on 13 3/8 Rail. Terms of Sale Systech. Inc. provides a 14-Day After Receipt of Product Warranty unless otherwise indicated. Buyer’s identified defective product shall be returned to Systech at Buyer’s expense. Buyer is responsible for obtaining return authorization from Seller. Full refund shall be issued after receipt. Inspection and serial number verification. Refund includes shipping paid outbound from Systech. Due to cost of administration. Purchased products returned due to no longer needed or Buyer purchased error shall be assessed 15% Unit Price) Restock Fee. Buyer is responsible for obtaining return authorization. Shipping paid outbound from Systech is not refundable. Systech ships via USPS and FedEx(Ground and Express) FOB Phoenix. Please contact Systech ... moreprior to paying for product if Express shipping is required. Buyer has option to select alternate transport carrier at Buyer’s expense. Buyer must arrange alternate shipping carrier. Acceptable Payment Methods are: PayPal; Visa; MasterCard or American Express. Credit Card payment is only accepted for domestic ship to locations. Unless otherwise approved by Systech. Local Pick up is acceptable. Applicable tax applies. We thank you in advance for shopping our Store and look forward to continued business with you. Powered by The free listing tool. List your items fast and easy and manage your active items. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13f29a75401-0xf7-
|
|
IKO: LWHS 15 Linear Slides(2) On Rail 9 3/8" L) X 5/8" Terms of Sale Systech. Inc. provides a 14-Day After Receipt of Product Warranty unless otherwise indicated. Buyer’s identified defective product shall be returned to Systech at Buyer’s expense. Buyer is responsible for obtaining return authorization from Seller. Full refund shall be issued after receipt. Inspection and serial number verification. Refund includes shipping paid outbound from Systech. Due to cost of administration. Purchased products returned due to no longer needed or Buyer purchased error shall be assessed 15% Unit Price) Restock Fee. Buyer is responsible for obtaining return authorization. Shipping paid outbound from Systech is not refundable. Systech ships via USPS and FedEx(Ground and Express) FOB Phoenix. ... morePlease contact Systech prior to paying for product if Express shipping is required. Buyer has option to select alternate transport carrier at Buyer’s expense. Buyer must arrange alternate shipping carrier. Acceptable Payment Methods are: PayPal; Visa; MasterCard or American Express. Credit Card payment is only accepted for domestic ship to locations. Unless otherwise approved by Systech. Local Pick up is acceptable. Applicable tax applies. We thank you in advance for shopping our Store and look forward to continued business with you. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
For bid 1 linear actuator gaget has alot of nice parts. It looks like the stepper motor turns the large gear and moves a small piece in and out. Can be used as is or for parts.
|
|
|
Linear actuator with 5 phase VEXTA stepper motor. Internal linear rails and ballscrew. Total length is 5.75" travel is slightly less that 1.5" Tested, working fine. I have other automation and cnc components. take a look. Will ship to lower 48 states only.
|
|
|
This is a THK KR linear actuator with a 24V DC motor and a linear encoder with readout sensor. The actuator and motor are tested and work nicely. Travel is 3.5in. Total length 10.75" with is around 1.5" I have other automation and cnc components. take a look. Will ship to lower 48 states only.
|
|
|
Hiwin LG15 Linear Slide CNC. If for any reason you are unsatisified. Item can be returned within 2 weeks in condition received for refund of purchase price. Included In Sale: Hiwin LG15 Linear Slide CNC Overall: 14 x 7 1/2 x 3 1/2 Inches. Plate: 7 1/2 x 6 1/2 x 1. I accept Paypal or Check. I ship by UP S or USPS. Posted with
|
|
G100984-P54 Lot(2) Kuroda GG15-10DS Ball-Screws Approx 30" Lg. Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# G100984 This lot of Two(2) Kuroda GG15-10DS Ball-Screws. Approximately 30" inches long, appears to be in very good cosmetic condition. I see no signs of previous use, although I am unable to verify that they have never been used. Please see the photographs. The pitch of the thread is between a 2.5 and 3 threads per inch. Items come exactly as shown in the photos above. No other accessories are included. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test these items so they are being sold as is. The unpacked dimensions of this lot are approximately 41“L inches ... morex 6“W inches x 3“H inches. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $18.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 8.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products are sold as advertised. As is and without warranty. Questions should be asked prior to bidding as all sales are final PAYMENT TERMS ARE PREPAID ONLY. Payments. ALL AUCTIONS ARE PREPAID ONLY. We accept Paypal payments that are US and Cana
|
|
|
USED. APPROX. SHIP WEIGHT: 50 LBS. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES, OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL CHARGES WILL BE PRIOR TO BIDDING OR BUYING. ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO THE SHIPPING CHARGES. THESE FEES WILL VARY ACCORDING TO SIZE OF PALLET. PLEASE CONTACT SELLER FOR PALLET PRICE& SHIPPING QUOTE. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. KS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
USED. APPROX. SHIP WEIGHT: 76 LBS. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES, OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL CHARGES WILL BE PRIOR TO BIDDING OR BUYING. ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO THE SHIPPING CHARGES. THESE FEES WILL VARY ACCORDING TO SIZE OF PALLET. PLEASE CONTACT SELLER FOR PALLET PRICE& SHIPPING QUOTE. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. KS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Pittman Motors in excellent condition. 19.1 Volts, 6.3: 1 Ratio medium torque. and Pittman Motor in excellent condition. 19.1 Volts 60.5:1
|
|
Used THK SSR20XW2QZSSHHC1M+320LPM Linear Guide 320mm Brand: THK Model: SSR20XW2QZSSHHC1M+320LPM Travel: 320mm Number of Blocks: 2. Sold As Is Where Is. With no implied warranty or guarantee. Our Inventory# 9130. 9131 Information is Preliminary. Subject to Buyer Verification. If you would like to inspect this item please contact us to make arrangements. We are a member of the MDNA(Machinery Dealers National Association) Orca Machine Tools. Inc. is a stocking used machine tools dealer in Albertville, MN. Please contact us with any questions you may have. There is a $20 loading charge on freight shipments. Buyer is responsible for all shipping costs. US Buyers: Insurance is provided at the buyers request and at the buyers cost. International Buyers are required to pay for Insurance. Please contact ... moreus for a shipping quote. Also please wait for an Invoice from us prior to sending payment. If you wish to purchase multiple items. We combine items for shipping and send you an invoice for all items with the combined shipping price. Minnesota buyers will be charged sales tax. Payment in full must be made within 2 days of bid closing. We accept PayPal. Funds must clear prior to item shipment. Visit our eBay Store! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
G100587-P54 Motorized 3-Axis Positioning Linear Stage(Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Click to Enlarge) Product ID# G100587 This Motorized 3-Axis Positioning Linear Stage appears to be in good cosmetic condition. Although there are a few small dings, scratches, signs of previous use. Please look at the photos. The wire leads to both of the motors have been SEVERED and will require parts or repair. I have no way to power-up or fully test this item so I am obligated to list it as“Not Working” Two axis are motorized and can achieve approximately 17 ¾” inches of travel and one axis is powered by a pneumatic cylinder and it 4” inches of travel. Item comes exactly as shown in the photos above. No other accessories are ... moreincluded. If you do not see it in the photos, it is not included. I do not have the equipment or training to formally test this item so it is being sold as is. The unpacked dimensions of this item are approximately 21“L inches x 13“W inches x 6“H inches. Please ask questions or indicate concerns prior to bidding. By placing a bid. You agree to all stated terms. All auctions are sold as advertised. As is and without warranty, unless otherwise stated in the item description. See additional terms of the auction below Shipping. Buyer pays a fixed shipping and handling fee of $22.00(for DOMESTIC shipments only- 48 contiguous states excluding Hawaii and Alaska) All international shipments(including Hawaii and Alaska residents) will be quoted based on winning bidders shipping address. The unpacked weight of this item is 11.00 Pounds Orders will ship 1-2 business days(excludes weekends and holidays) after receipt of confirmed/verified Paypal payments. We do not process orders nor ship on weekends or holidays. Auction Terms. Upon end of auction. The winning bidder should proceed to"CheckOut" and will be redirected to our Auction Checkout Page. WE DO NOT TAKE CREDIT CARDS(except through PayPal) All auctioned products a
|
|
MITUTOYO FOCUS BLOCK 50AAB769 2" TRAVEL MANUAL CONTROL THANK YOU! Thank you for viewing our items. If you would like to receive updates of our new listings. Please click here and subscribe for our bi-weekly newsletter. Visit our webstore at Burchams Surplus. IMPORTANT SHIPPING INFORMATION! FedEx is our standard carrier* but we are happy to negotiate other shipping arrangements. USPS Priority and UPS shipping are available upon request. Please contact us for details. Our standard carrier to Canada is USPS Priority. DESCRIPTION: This auction i s for a MITUTOYO FOCUS BLOCK 50AAB769 2" TRAVEL MANUAL CONTROL! Model# 50AAB769 Condition: Used surplus in good cosmetic condition with only light signs of wear. Additional description: This unit has 2 inches of smooth travel More Info on the ... moreWeb: N/A. This item retails for about $0.00. If this listing is for a multiple quantity of like items we guarantee the item you receive will be the matching model number and in as good or better condition than the auction photo and description. For warranty information on this auction please refer to the"Returns" details above. For full details please review Warranty& Returns. OUR PROMISE: Burcham's Metal's of Albany. OR has been in business for over fifty years with an established presence on eBay for over twelve years. Burchams Surplus is our eBay store. As an experienced eBay seller it has been our privilege to provide thousands of customers with affordable products and professional service. It is our aim to provide you with a superior eBay buying experience. We do our best to accurately describe each item for sale. Contact us before you bid so that we can answer all your questions about an item before you purchase. We are committed to customer satisfaction through fair surplus pricing. Fast, affordable shipping and professional packaging. We appreciate your business and we want you to come back! Here is what some of our recent customers have to say about us: Great Transaction! Highly Recommended! Will
|
|
|
USED APPROX. SHIP WEIGHT: 42 LBS. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES, OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL CHARGES WILL BE PRIOR TO BIDDING OR BUYING. ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO THE SHIPPING CHARGES. THESE FEES WILL VARY ACCORDING TO SIZE OF PALLET. PLEASE CONTACT SELLER FOR PALLET PRICE& SHIPPING QUOTE. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. KS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
You are bidding on 1 ball screw of unknown manufacture.Comes as pictured with bearings and it moves smoothly 20mm Diameter 15mm travel per revolution Ends(journals) are 12mm see pictures for more info.
|
|
|
This auction is for 2 used MATCHING THK BSF 2510B ball screws These were set up as a double"X" axis driven by a single stepper + timing pulleys and would be great for someone building the same. These move smoothly, here are some measurements. But the pictures are easier to decipher: 0 false 18 pt 18 pt 0 0 false false false PAIR THK BSF2510B OVERALL LENGTH 960MM. THREADED LENGTH 815MM. 20MM DIA X 3” LONG FIXED END(THREADED FIRST 15 MM) 15MM DIA X 56MM LONG FREE END. 10MM TRAVEL PER ROTATION. BALL NUT IS 97MM LONG.
|
|
BOSCH REXROTH LINEAR RUNNER BLOCK R162281420 w/ REXROTH GUIDE RAIL. LENGTH 476mm THANK YOU! Thank you for viewing our items. If you would like to receive updates of our new listings. Please click here and subscribe for our bi-weekly newsletter. Visit our webstore at Burchams Surplus. IMPORTANT SHIPPING INFORMATION! FedEx is our standard carrier* but we are happy to negotiate other shipping arrangements. USPS Priority and UPS shipping are available upon request. Please contact us for details. Our standard carrier to Canada is USPS Priority. DESCRIPTION: This auction i s for a BOSCH REXROTH LINEAR RUNNER BLOCK R162281420 w/ REXROTH GUIDE RAIL. LENGTH 476mm! Model# R162281420 Condition: Used surplus in good cosmetic condition with only light signs of wear. Additional description: This sale only ... moreincludes(1) Guide Rail. And(2) Runner Blocks. Both of these Runner Blocks have smooth travel and the rail with this unit is 476mm long. More Info on the Web: This item retails for about $650.00. If this listing is for a multiple quantity of like items we guarantee the item you receive will be the matching model number and in as good or better condition than the auction photo and description. For warranty information on this auction please refer to the"Returns" details above. For full details please review Warranty& Returns. OUR PROMISE: Burcham's Metal's of Albany. OR has been in business for over fifty years with an established presence on eBay for over twelve years. Burchams Surplus is our eBay store. As an experienced eBay seller it has been our privilege to provide thousands of customers with affordable products and professional service. It is our aim to provide you with a superior eBay buying experience. We do our best to accurately describe each item for sale. Contact us before you bid so that we can answer all your questions about an item before you purchase. We are committed to customer satisfaction through fair surplus pricing. Fast, affordable shipping and professional packaging. We appreciate
|
|
|
Misumi Rodless Cylinders Location: C 0305 Specs Make: Misumi Model: LHSS12 Shaft Length: 39 3/8" Shaft Diameter: 12mm Description Here is a lot of two Misumi/Barden rodless cylinders. These were pulled from working equipment and are in excellent working and cosmetic condition. They are guaranteed not DOA with a 14 day right of return. Shipping Feel free to e-mail us at motionconstrained@gmail.com if you have any questions. Shipping quotes are available under the shipping tab. We always combine shipping for multiple items purchased. free customisable galleries from
|
|
|
2 Hiwin Guides Location: C 1007 Specs Make: Hiwin Model: LGW25CB Rail Length: 338mm Rail Width: 23mm Block Width: ~70mm Block Length: ~58mm Description Here are two Hiwin linear guides. These rails and blocks are in perfect working and cosmetic condition. The blocks have a healthy amount of grease. Sliding smoothly on the rails. The seals are in excellent shape. Both rails and blocks are included as shown. These rails are guaranteed not DOA with a 14 day right of return. Shipping Feel free to e-mail us at motionconstrained@gmail.com if you have any questions. Also. Feel free to call our office anytime at 970-292-8316. Shipping quotes are available under the shipping tab. We always combine shipping for multiple items purchased. free customisable galleries from
|
|
|
You are bidding on a Lightly used Linear Slide with Parker slide and with Micrometer PHD 6" Linear slide with Parker Daedal Hannifin Linear Slide 802-8658A. Part no: SIPD5 20 x 50-J3-M-NE12-NR2. 50mm stroke comes with shock observer comes with 2 5/32" Legis flow control. Comes with Parker 802-8658A Slide. Parker Slide travel approx. 20 mm. Measurement: 3.25 X 3.25 also comes with micrometer. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*a4%601gc%3E-13f4d85c836-0xfe-
|
|
|
Wittenstein linear actuator. This was removed from a working machine. But I personally don't have the ability to test it. I have 2 available, but this auction is for one only. Winning bidder has first opportunity at the 2nd one by contacting me within 12 hours of auction end. Posted with
|
|
|
THK RSR12WZM 150mm"LOT OF 4" Rail width: 24mm/ rail height: 8.5mm Rail length: 150mm Block size: 44x40mm overall height: 14mm 4Rails + 4 Bearings Photos show the actual items you'll receive. Thank you for visiting! i000000.
|
|
|
SBC SBN(S)12 220mm"LOT OF 4" Rail width: 12mm/ rail height: 7.5mm Rail length: 220mm Block size: 37x27mm overall height: 13mm 4Rails + 4 Bearings Photos show the actual items you'll receive. Thank you for visiting! i000000. A;06d2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3Ea%3B06d2-13f4d85c90e-0xe6-
|
|
NB SYTS STAINLESS LINEAR PRECISION 3/4" SLIDE TABLE-FREE SHIPPING You are bidding on a new. Used only for testing, NB Stainless 3/4" Stroke Precision Linear Type SYTS Slide Table. The SYTS type is a thin. Compact slide table. The anti-corrosion type slide table is made of all stainless steel components, making it suitable for use in clean rooms. The slide has 3/4 inches of precision stroke. Dimensions- 1 3/16" wide x 1 3/8" long For more Information see: http:pibsales.com/pdf/NB%20catalogs/new/nb_engin.pdf This slide is perfect for a precision axis or any requirement for a precision movement. Shipping in the Continental US is FREE- I have very competitive rates for our always welcomed International bidders. I will fully guarantee this slide- more and different sizes available. ... moreThanks for looking! If you have any question on this item please call us at 1-800-826-3433(9- 5pm Eastern) Pay me securely with your Visa or MasterCard through PayPal! Powered by
|
|
IAI Robo Cylinder MDL RCP2-SA7-1-PM-8-700-P1-S Unit was removed from a working lab environment Please give us a call at 860-242-4953 to discuss the unit or payment options. All duties and customs fees to paid by bidder. We do accept Personal. Company and Bank Checks, as well as Bank Wire Transfers, and Money Orders. SHIPPING POLICY: We sell sensitive test and measurement equipment here on Ebay. We strive for 5-star service. So we invest a great deal of time and care to package all of our items safely for shipment. This attention to detail means it may take up to 10 days for us to prepare and ship your units out of our facility. We want to support you throughout the transaction and want you to be satisfied, so please to contact us at 860-242-4953 with any questions or concerns. We do out best ... moreto ship quickly. But never at the expense of quality delivery. RETURN POLICY: All units are being sold with a"3 day right of return" If you are not happy with the unit let us know and ship it back to us within three days of receipt of the unit. And we will be happy to offer a refund. The auction description is written as a guide, we strongly recommened that you come view and test the units at our facility. Feel free to give us a call at 860-242-4953 4953. And we will help answer any questions that you may have, before you purchase an item. We do not accept returns so please call with any questions that you have BEFORE you bid.
|
|
|
12v mini actuator. 6v mini acutator. Email for more pictures.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13f55d04916-0xff-
|
|
You are bidding on(3) THREE x ROBO Cylinder RCP2 200mm. 250mm, 500mm& IAI Robo Net Network Controllers These units are in good cosmetic and working condition. All three Robo Cylinder Electric Actuators come with Controllers for each respective units. These parts were carefully removed from a larger machine that manufactured solar cells. A picture of the machine is shown in attached images for reference. Please review all images for detailed view of units. You get the following items: 1) x IAI Corporation Robo Net Network Controller- Complete Unit on Din Rail- CC Link. Model: RGW-S10- Three) Network Controllers. Model: RPCON-42P(1) x Dyadic Systems Co. Ltd. ADP-1 serial protocol RS232C/ RS485 converter(1) x IAI Robo Cylinder. 200mm stroke- Model: RCP-SA5R-1-42P-12-200-P1-R05-ML(1) x IAI ... moreRobo Cylinder. 250mm stroke- Model: RCP-SA5C-1-42P-6-250-P1-S(1) x IAI Robo Cylinder. 500mm stroke- Model: RCP-SS7R-1-42P-12-500-P1-X04-ML(All Cables as shown in pictures) Thanks for looking. Product Overview: IAI Corporation Robo Net Network Controller- Complete Unit on Din Rail Dyadic Systems Co. Ltd. ADP-1 serial protocol RS232C/ RS485 converter The ADP-1 serial protocol converter allows RS-232 devices to easily communicatie with Dyadic products. The most common use of this product is for programming Dyadic actuators and motors from a PC. The ADP-1 uses a 9-pin serial connection so if your computer does not have a serial port you may need a USB-serial converter. IAI Robo Cylinder. 200mm stroke- Model: RCP-SA5R-1-42P-12-200-P1-R05-ML IAI Robo Cylinder. 250mm stroke- Model: RCP-SA5C-1-42P-6-250-P1-S IAI Robo Cylinder. 500mm stroke. Model: RCP-SS7R-1-42P-12-500-P1-X04-ML FYI- Our products are acquired from bankrupt. Downsized or defunct companies. Most items are pulled from their working environment and operation. Items are usually sold in the same condition that we receive them. If there are any known issues regarding the item, we will certainly let you know. We do our best to take pictures of the actua
|
|
|
USED SEE PICS APPROX SHIPPING WEIGHT: 60 LBS. ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO PURCHASE PRICE. THESE FEES WILL VARY ACCORDING TO SIZE. PLEASE CONTACT SELLER FOR PRICE OF PALLET& SHIP QUOTE. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES& OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BIDDING OR BUYING. PLEASE CONTACT US FOR SHIP QUOTE. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. AJ. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
TOLOMATIC B3W15BWS30SK33SDR-XJ. SPL PART# 34150936 THIS WAS USED IN A R&D PROJECT SO IT HAS BEEN UNTESTED SINCE IT WAS REMOVED. IS IN GOOD CONDITION. I AM LISTING IT AS PARTS ONLY BECAUSE I CAN NOT TEST IT SEE IF IT IS FUNCTIONAL. MAKE AN OFFER!
|
|
|
Linear Motion Set up includes: Very'high end' zero backlash acme nut/acme screw combination Pitch = 10 Servo motor by Motor Power Company Type EPG/61 SN 0541798 PN 1003102333001 Stall Torque.32 Nm Rated Speed 3000 rpm Made in Italy Gear Box by Motor Power Company Type EPG51/2.18.7.1.S.12 Rated Torque 15 Nm Ratio 1:18 PN 05704000621 Made in Italy We bought for a project that we never pursued
|
|
ESI Dekatran Model DT45 Serial No. 00804 UP FOR AUCTION IS AN ESI DEKATRAN MODEL DT45 SERIAL NO. 00804. THE UNIT COMES FROM A WORKING ENVIRONMENT. BUT WE ARE UNABLE TO PERFORM TESTING HERE AT NEXTSTEP. THIS DEKATRAN HAS VERY MINOR SCUFF MARKS TO THE OUTER CASE, BUT OVERALL IS IN GOOD CONDITION. Satisfaction guaranteed! If you are not completely satisfied. You may return the item within 14 days of purchase for a full refund. Questions welcome. Items are usually shipped USPS by the next business day after payment is received. We often ship within one business hour of payment. Our eBay hours are Monday to Friday 10-6 Pacific. International customers. Please ask about shipping options before bidding. As part of our mission to reduce waste. 100% of packing materials are reused(except Priority Mail ... moreflat rate boxes) All items will be properly packed, but your foam packing peanuts may not match. If you are not happy with the item you've purchased. We will work to resolve the situation to your satisfaction. Please give us a chance to fix a problem before leaving feedback. Thank you for supporting NextStep Recycling!
|
|
|
Lightly used very good condition linear positioner Parker Daedal et5000000 model 506024etes 32in. Long 24in. Travel 6in. Table.20 in. Lead(5pitch) rolling Ballscrew Nema23 motor mount with.25in. Coupling
|
|
|
Anorad/ Rockwell Gantry system with dual linear motors in Y direction single linear motor in X direction Linear Z and T too! These are complete and removed from production. The software has been removed. Operator interface is Allen Bradly touch screen. All drives and system has been checked out for operation of all drives before removal from service. These systems(2) were build for testing and visual inspection of disk drive read heads. There are 3 cameras for inspection. There are three computers each. UPS. And KVM in each unit. These are currently warehoused in Plano Texas. You will have to arrange your own pickup by freighter or pick up locally. You can inspect in person before the auction ends if you care to or we will be happy to answer any questions.
|
|
aims NEW! BELIMO PROPORTIONAL ACTUATOR NFB24 read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Belimo. This is a NEW! Proportional Actuator With Spring Return. Model# NFB24 Features: For Use With Dampers and Valves. Specifications: Torque: 90 in-lb. Signal Type: Proportional. Power Consumption: 6 Watts. Timing(Sec. 90. Voltage: 24 AC. Power Rating(VA) 3.2. Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. NEW! BELIMO PROPORTIONAL ACTUATOR NFB24 NEW! BELIMO PROPORTIONAL ACTUATOR ... moreNFB24 Reliable Tool Inc. c 2011 | Powered by
|
|
|
USED SEE PICS FOR MORE DETAILS. APPROX SHIPPING WEIGHT: 70LBS ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO PURCHASE PRICE. THESE FEES WILL VARY ACCORDING TO SIZE. PLEASE CONTACT SELLER FOR PRICE OF PALLET& SHIP QUOTE. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES AND CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COST WILL BE PRIOR TO BIDDING OR BUYING. CONTACT SELLER FOR SHIPPING QUOTE KS Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
USED APPROX. SHIP WEIGHT: 55 LBS. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES, OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL CHARGES WILL BE PRIOR TO BIDDING OR BUYING. ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO THE SHIPPING CHARGES. THESE FEES WILL VARY ACCORDING TO SIZE OF PALLET. PLEASE CONTACT SELLER FOR PALLET PRICE& SHIPPING QUOTE. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. KS. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Green Penguin Inc. Technology is Renewable Condition: Clean. Tested and functional. Note: If you do not see your model/ part on our compatibility list and you do not see it in our store. Please contact us and we will be happy to assist. One(1) whatever this is. as pictured and described. Unless otherwise noted. This listing does not include any other computer parts(likely available in one of our other listings) Types: At this time. Green Penguin accepts PayPal payments only. Please do not ask us for exceptions; we hate saying no: Limitations: We cannot ship to any address other than your PayPal confirmed address. We accept the following payment types through PayPal: Domestic: Free domestic shipping! International: Please see shipping calculator and please contact us for shipping costs on purchases ... moreof 3 or more units. Carrier/Method: Orders will ship via USPS or UPS at our discretion. If you require upgraded shipping. Please let us know PRIOR to purchase that we might work to accommodate your requirements. Turnaround Time: Shipping will occur within 1 business day of payment clearance. PayPal eCheck payments take 3-7 days to clear. Please base your standards for speedy delivery upon that window of time. In the unlikely event that you receive an item from us that is not working. We will replace it for you or refund your purchase if a replacement is not available. If you have purchased the wrong item. There are 2 options available: 1) Return for store credit(in many cases. We will have the item you actually need) less the greater of $2.50 or our original shipping costs. 2) Return the item for a refund in the amount of total purchase price less the greater of $2.50 or 25% of your original purchase price. If you are looking for more units than those we have listed. Please; we may have more in stock. We at Green Penguin. Inc. have dedicated ourselves to global e-waste reduction through helping our customers maximize the usable lives of their computer products as easily and affordably as possible.
|
|
|
Del-tron Linear Bearing Slide 3 1/4" x 1 3/4" measurements shown in photos please see all photos in very good clean and working condition if you have any questions or would like any extra photos please contact me and if you live local all items can be previewed or picked up to save on postage Please be sure to check out my other tools and equipment i can combine postage all items are sent within 2 business days thank you for viewing.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2Bf7%60%3E-13f66f43a83-0xf9-
|
|
This auction will end June 22nd So buy now! There are over 65 pieces in this collection of Linear Rails.Slides,gears,Dc motors,80 20,assorted parts off of working automation equipment. Perfect for the DIY cnc,robotics,3d printer or any other automated project The pictures say it all. I will take 15% of the price for whoever uses(buy now) by June 21st Short list of the larger items There are other items that don't appear in the pictures. 6) THK linear bearings 725mm(like new) 4) 24 pillow blocks 4) 20 pillow blocks 2) 48” linear rails 1” with supports 12) Assorted bearings 2) Ball screw\w shaft and ends 31” 1) Large ball screw Baldor dc motor\with speed control Belts Slides Push bearings Assorted pillow blocks Assorted z-axis parts There are too many items to list but if you have a Any ... morequestions please email. Thanks for looking PayPal preferred. Cash accepted if picked up before the 22of June Pick up only-unless other arrangements are made! Can load at this location June Delivery out to 100 miles–exception NY city) with extra charge! must be before June 21st) other shipping arrangements can be made. But shipping may be delayed till mid July. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13f66f43ab5-0xf5-
|
|
|
Industrial Devices Co. XY motorized stage. This unit was removed from a working equipment. Please see photos of actual item. Please note that the insulation on some of the cables are partially damaged but it is 100% functional) It is equiped with stepper motors(w/ optional encoder) It moves smooth no damage to neither the slides nor the ball screw. Travel in X&Y is 12" Buyer to pay shipping cost
|
|
|
I have a pair of used unislide assemblies. More information about them can be found here they are both a little bit under 4" in total lengtha as you can see in the photo with the tape measure. One of the slides has it's factory endcap on it while it appears that the other has been cut down a little bit from it's origional length. Both of them move nicely but one is tighter than thenother( the gibs are all adjustable) I removed these from an assembly that positioned a mittor for some laser optics and i believe that they were probably moved very little in their lives but rather just used to get a mirror array into position. They are both pretty clean and ready to go. Shipping is to the lowef 48 states only via FREE priority mail. Thanks for looking.
|
|
|
USED 395 IN.LBS OUTPUT TORQUE@ 80PSI MAX OPERATING PRESSURE 120PSI SER. 39 APPROX. SHIP WEIGHT:41 LBS. INTERNATIONAL BUYERS- PLEASE NOTE: IMPORT DUTIES. TAXES, OTHER CHARGES ARE NOT INCLUDED IN THE ITEM PRICE OR SHIPPING COST. THESE CHARGES ARE THE BUYER'S RESPONSIBILITY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL CHARGES WILL BE PRIOR TO BIDDING OR BUYING. ALL OVERSIZED ITEMS WILL HAVE A PALLET FEE ADDED TO THE SHIPPING CHARGES. THESE FEES WILL VARY ACCORDING TO SIZE OF PALLET. PLEASE CONTACT SELLER FOR PALLET PRICE& SHIPPING QUOTE. THERE WILL BE A 15% RESTOCKING FEE ON ALL RETURNED ITEMS. KS. Powered by The free listing tool. List your items fast and easy and manage your active items. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13f677f6f7c-0xf8-
|
|
industrial_devices_corporation_mb3808_d_linear_actuator Industrial Devices MB3808/D Linear Actuator 16" Moving Carrier NO RESERVE! BUY IT NOW Ask our Sales Personnel for details. Item ID: 380316, Manufacturer: Industrial Devices Corporation, Model Number: MB3808/D, Description: Linear Actuator, Made in: United Kingdom, Weight: 45Lbs, Condition: In use when removed, Cosmetic: Very Good, Have questions regarding this product? Contact us: ebay@megawavz.com Bidders with less than a( 5) rating must contact us prior to bidding otherwise their bids will be removed. Payment must be received no later than 7 working days from the closing date of the auction. Unless discussed with the billing party. In the case that payment has not been received within 7 working days. Groupe Interconnexion reserves ... morethe right to open an unpaid auction request.Unless otherwise notified) All Items are subject to a Packing and Handling Fee of 3% 15$ Minimum) Canadian residents should expect Provincial/Federal taxes to be applied. IMPORTANT: Read our shipping instructions allocated to your region; Canada. USA or International. Alternative buyer's shipping account are also welcome CANADA: A Minimum Shipping Charge of $20.00usd will be applied to all auctions. Higher rates will apply in northern Canada) Upon demand. We'll be happy to provide you a shipping quote. Please state destination city& postal code. If you disagree with our shipping terms. We are open to using your shipping account. If the dimensional weight(calculated using the final dimensions of the packed purchase) exceeds that of the actual item weight. The shipping cost will be calculated based on the dimensional weight. Sorry. We will not ship post mail. USA: A Minimum shipping charge of $25.00usd will be applied to all auctions. Upon demand. We'll be happy to provide you a shipping quote. Please state destination city& postal code. If you disagree with our shipping terms. We are open to using your shipping account.
|
|
|
Ground Ball Screw L800mm Screw shaft overall length: 800mm Screw diameter: 16mm Screw length: 725mm Lead: 5mm Travel: 695mm Suppor unit: BK12.BF12 Input shaft dia: 8mm Used item and photos show the actual item you will receive.Thanks! i000000. Dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f677f6fc0-0xf9-
|
|
|
Up for auction is a preowned jayso/skf superjack imd3 series 50mm 2" stroke 500n 112lbs 12v linear actuator. In good working condition has some glue spots and a few scuffs. Speed is 13mm per sec. Posted with
|
|
|
We're selling an Adept Technology 90402-30023/XY-HRS-023-S 101 AD linear actuator in good condition. This is a ball screw actuator with a 10 mm pitch and a 100 W servo motor. Travel is 350 mm. There are a few scrapes and dings on the case. But operation is smooth and uniform from end to end. We were not able to save the interconnecting cables, but will send the connectors shown in the photos. We removed this actuator from a working machine, and guarantee it to be in good working order. Shipping weight will be 16 pounds. Good luck!
|
|
aims ECLIPSE/DUNGS EMP-424-4 ELECTRIC ACTUATOR 120 V read Terms& Conditions LOCAL PICKUP AVAILABLE! MONDAY THROUGH FRIDAY: FROM 1:00 PM TO 4:30 PM PST Made by Eclipse/Dungs This is an Electric Actuator in good condition. Model# EMP-424-4 Specifications: Volts: 120. Hz: 60. Amps: 0.65. Watts: 40. Overall Dimensions: 5-1/2" x 7" x 7-1/4" Comes as shown in pictures. Check out the photos! if you have any other questions. Give us a call or email. Reliable Tool currently has a large selection of products listed, please check out our other auctions in this category by visiting our page for more Great Deals! Bidding starts at a dollar with no reserve. ECLIPSE/DUNGS EMP-424-4 ELECTRIC ACTUATOR 120 V ECLIPSE/DUNGS EMP-424-4 ELECTRIC ACTUATOR 120 V Reliable Tool Inc. c 2011 | Powered ... moreby
|
|
|
THK Linear Guide Location: C 0702 Specs Make: THK Model: SR20 Rail Length: 675mm Block Width: ~42mm Block Length: ~63mm Description Here THK SR20 linear guide. This is in excellent working and cosmetic shape. The rail is clean and without pitting or wear. The block slides smoothly on the rail without play. This is guaranteed not DOA with a 14 day right of return. Shipping Feel free to e-mail us at motionconstrained@gmail.com if you have any questions. Shipping quotes are available under the shipping tab. We always combine shipping for multiple items purchased. free customisable galleries from
|
|
|
Custom Transfer Table with Baldor 3/4 HP DC Motor/ STI MiniSafe Light Curtain Table is 84' LOA. 28.5" wide, 32" high. Travel is 34" Please contact us for more information. Thanks for looking. PLEASE NOTE: INTERNATIONAL CUSTOMERS PAY ACTUAL SHIPPING CHARGES.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13f6ba8ec79-0xfd-
|
|
Triple Axis Linear Positioning Slide Rail Actuator Platform(XY Breakout PCB) Triple Axis Linear Positioning NSK Slide Rail Actuator Platform(XY Breakout PCB) Details: Triple Axis Linear Positioning Slide Rail Actuator Platform(XY Breakout PCB) 2) Rotary Encoders(2) 7.5 Inch Linear Slide Rails w/1) LE12-1 Bearing Block each(2) 2.75 Inch Linear Slide Rails w/1) H12-1 Bearing Block each(87-057) 2) 6 Inch Linear Lead Screws Please refer to the photos for more details. Condition: Good cosmetic condition as shown. Tested: Slides by hand. No Further Testing. Warranty: 14-Day Right-of-Return SKU: 392473 Please review our Help page for all of our Terms and Conditions before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms and conditions. Questions? Send ... moreus a message SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not included. Place a bid only if you intend to purchase the item. If payment is not received within 3 days. The item(s) will be relisted at our discretion. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 8.75% Sales tax applies to CALIFORNIA residents unless a resale tax ID is provided for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. If you would like to pay using a credit card. Please call us at(408) 743-5609. Resellers Click Here* WARRANTY: Please see listing above for the warranty that applies to this item. AS-IS. No Warranty: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO returns will be accepted for this item. 14-Day Right-of-Return: You have f
|
|
|
THK Linear Guide Location: C 2003 Specs Make: THK Model: SHS15C Rail Length: 280mm Block Width: 47mm Block Length: 48mm Description Here is a THK SHS15 caged ball linear guide. This is in excellent working and cosmetic shape. The rail is clean and without pitting or wear. The blocks slide smoothly on the rail without play. This is guaranteed not DOA with a 14 day right of return. Shipping Feel free to e-mail us at motionconstrained@gmail.com if you have any questions. Shipping quotes are available under the shipping tab. We always combine shipping for multiple items purchased. free customisable galleries from jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13f6ba8ec88-0xfb-
|
|
Item: Linear Bearings Manufacturer: IKO Country Of Origin: Japan Quantity: 4rails& 4blocks(Lot of 4) Overall Height(Rail Combination with Block) = 10mm Rail width = 9 mm Rail length = 154mm- FREE SHPPING FEE. CONDITION- TAKEN FROM A WORKING EQUIPMENT-SHIPPING- Winning bidder will get free Shipping and Handling. Normally it will take less than 10 working days to deliver to winning bidder. ★ PLEASE LET US KNOW YOUR CONTACT NUMBERS VIA E-MAIL FOR EASY AND QUICK DELIVERY. OR CHANGE YOUR PERSONAL INFORMATION BEFORE YOU BID. ★-Return Policy- Please contact us first before returning. Return can be accepted within 14 days after item’ s arrival. And it has to be in the original condition as it was sent out. Buyer is responsible for the postage of the returned item. And the original postage cost ... moreis not refundable. If you would like to exchange an item. Additional postage charge also will incur for dispatching the item back to you. Payment- Paypal Only
|
|
|
You are bidding on a 25 linear rail. The rail is 2400mm or 94.5 inches long with some surface spots on the end of one rail. Please review through the picture(I didn't know how to clean it up: Rail's was removed from machine of good condition. Quantity: 1SET(2Rail. 4Blocks) Condition: Used Thanks for looking. If you have any questions about product or shipping method please contact us.
|
|
|
parker linear slide model 506010etes-d2l4c2e1w1 On right angle bracket Posted with
|
|
Questions? Call us: 1-877-328-9236. INA 32.25"L) Linear Motion Guide Rail w/ INA H10-KWE-15G1V1 Bearing Block. Manufacturer: INA Model: Various Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: INA Condition: Used. Comes in non-original packaging. There are scratches and a little on the outer assembly of the linear guide rail and a little rust on the bearing blocks. The linear rail and bearing blocks are in fairly good cosmetic condition. Notes: The bearing block runs smooth along the linear guide rail. No further testing was performed. No manuals. Cords/cables, or additional items are included if not listed or shown. Included: 1) INA 32.25"L) Linear Motion Guide Rail, 1) INA H10-KWE-15G1V1 Bearing Block, Specifications: Manufacturer: ... moreINA, Model: Unknown Rail length: 32.25" Rail width: 0.614" Rail height: 0.583" Model: H10-KWE-15G1V1 Bearing block, Block length: 2.1315" Block width: 1.8435" Block height: 0.758" Distance between holes: 2.284" SKU: N15N014 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to AP
|
|
Questions? Call us: 1-877-328-9236. SMAC LAS30-015-55 Linear Slide 15mm Stroke 24Volt 5 Micron Encoder. Manufacturer: SMAC Model: LAS30-015-55 Condition: Used Price: Cosmetic appearance may vary slightly from pictured unit(s) Manufacturer: SMAC Condition: Used. Comes in non-original packaging. Item has minor scuffs from previous use. Notes: This item was removed from a working environment; however. No testing was performed by us. No manuals, cords/cables, or additional items are included if not listed or shown. Included: 1) SMAC LAS30-015-55 Linear Slide, Specifications: Manufacturer: SMAC, Model: LAS30-015-55, Stroke Length: 15mm, Volts: 24 Single Coil, Encoder: 5 Micron, SKU: M33M020 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give ... moreus a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will be charged actual shipping costs. Please contact us for a quote. Shipping to APO/FPO/PO Box may or may not be available. Please contact us before purchasing to confirm. DougDeals does not ship on buyer accounts or allow the buyer to arrange shipping. Shipment must be arranged through us and will be prepaid to us by the buyer. Local pick up is available for buyers and their direct employees. Warranty. This item is guaranteed to
|
|
Specification Model Number: BNT1405-2.6 Manufacturer: THK Country Of Origin: Japan. Quantity: 1 Unit. Condition: Used(good working condition) Screw Type: Rolled Ball Screw. Main Size(Metric) Shaft Diameter = 14mm Lead(Pitch- distance by 1 rotation) = 5mm Nut Width = 34 mm Nut Fasten Center = 26 mm X 22mm NUT Length = 35 mm Overall Length: 335mm Screw Length: 275mm Motor Side(Fixture Part) diameter for coupling: 8mm Motor Side(Fixture Part) diameter: 10mm(applicable to AK15. EK15, BK15, FK15) Support Side diameter: 8mm(applicable to AF15. EF15, BF15, FF15) Ball Screw Support Unit: BK10 + 608zz Must Read Length of Ball Screw. There can be a difference of 1~2mm. The ball inside the Ball Screw Nut. Can fall if you eject the Nut from Screw The frequently used part was discolored. Check the screw ... morepart at picture. Rolled Ball Screw have backlash at origin condition. If you want no-backlash type screw. Then we recommend ground type ball screw or double nut preload type. D on't eject the screw nut from the screw. Review catalog image Main dimension. Machined part is not same as catalog image. Applications: for linear motion. Factory Automation system. This is not suitable for precision motion. As CNC or zero-backlash system. The Serial Number may be different from actual. But the quality of item is almost equal. If You Want. If you want review actual item then request actual image before buying. Send message. You c an purchase more quanti ty of goods. Please message to us. Actual item quantity is more exist. If you have any questions about product or shipping method. Send message us and we will help your business with pleasure. Shipping Notice: We Use shipping address by PAYPAL Information. Since it is an international flat rate shipping. It usually takes 15 to 30 days to deliver. Sometimes it takes more than usual. Please understand it depends on the customs and post office of your country. But please don't worry. Most of the shipping it is delivered on time. except faraway country) If you
|
|
|
Here are 2 Sanyo Denki AC Servo P50B07030DCS00M Motors. These motors have been used but are in good condition. 1
|
|
Feel free to contact us for additional information through ebay mail. Or directly at: nrscientific@gmail.com or at(201) 592-1864. Anorad X and Y Positioning Stages S/N: 400229X and 400229Y. These two stages were part of a Xerox Print Head Inspection System by Xiris Automation. And were sold for $15,000 about 10 years ago. They still function well. And can be used in numerous applications. Currently, they are installed on a 5" thick granite vibration table measuring 35 3/4"w x 23 7/8"d. They are attached to a computer with the applicable software(Version 2.0) The listing and pricing are for the stages alone. But they can be sold as a unit with the table, computer and software, as well, for a negotiated amount. Stage Dimensions: 28 3/8" L x 7 7/8"w. The travel length ... moreis 27 1/4" Normal 0 For your reference. The seller is N&R Scientific Co. Inc. We have been providing the highest quality refurbished and fully guaranteed equipment worldwide. You can purchase with complete confidence that the equipment will be provided in excellent cosmetic and perfect operational condition. Our facility is located in the metropolitan NYC area.
|
|
IKO L27.5" Linear Positioning Slide Rail w/ 1) LWHT20SL Bearing Block IKO L27.5" Linear Positioning Slide Rail w/ 1) LWHT20SL Bearing Block Details: 1) IKO L27.5" Linear Positioning Slide Rail w/ 1) LWHT20SL Bearing Block Condition: Great cosmetic condition with little to no signs of previous use. SEE PHOTOS) Tested: Bearing block slides smoothly by hand. Warranty: 14 day right of Return SKU: 392476 Please review our Help page for all of our Terms and Conditions before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms and conditions. Questions? Send us a message SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not included. Place a bid only ... moreif you intend to purchase the item. If payment is not received within 3 days. The item(s) will be relisted at our discretion. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 8.75% Sales tax applies to CALIFORNIA residents unless a resale tax ID is provided for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. If you would like to pay using a credit card. Please call us at(408) 743-5609. Resellers Click Here* WARRANTY: Please see listing above for the warranty that applies to this item. AS-IS. No Warranty: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO returns will be accepted for this item. 14-Day Right-of-Return: You have fourteen(14) days to contact us for a replacement or refund. We can not warranty compatibility with your equipment. Or warranty items that have been installed in your computer and/or altered once they have
|
|
IKO LRXD15SL 13.75" Travel Linear Positioning Slide Rail w/1 SX Bearing Block IKO LRXD15SL 13.75" Travel Linear Positioning Slide Rail w/1 SX Bearing Block Details: 1) IKO LRXD15SL 13.75" Travel Linear Positioning Slide Rail w/1 SX Bearing Block. Condition: Great cosmetic condition with little to no signs of previous use. SEE PHOTOS) Tested: Bearing blocks slide smoothly by hand. Warranty: 14 day right of Return SKU: 392476 Please review our Help page for all of our Terms and Conditions before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms and conditions. Questions? Send us a message SALE TERMS AND CONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not ... moreincluded. Place a bid only if you intend to purchase the item. If payment is not received within 3 days. The item(s) will be relisted at our discretion. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 8.75% Sales tax applies to CALIFORNIA residents unless a resale tax ID is provided for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. If you would like to pay using a credit card. Please call us at(408) 743-5609. Resellers Click Here* WARRANTY: Please see listing above for the warranty that applies to this item. AS-IS. No Warranty: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO returns will be accepted for this item. 14-Day Right-of-Return: You have fourteen(14) days to contact us for a replacement or refund. We can not warranty compatibility with your equipment. Or warranty items that have been installed in your computer and/or
|
|
6" Inch Linear Slide Rail Miniature Guide V- Grooved w/ 1 SSEBZ16 Bearing Block Misumi 6" Inch Linear Slide Rail Miniature Guide V- Grooved w/ 1 SSEBZ16 Bearing Block Details: 6" Inch Linear Slide Rail Miniature Guide V- Grooved w/ 1 SSEBZ16 Bearing Block Guide Width/ Diameter: 0.5906 inch(15 mm) Guide/ Rail Shape: Miniature Guide; V- Grooved Guide Material: Stainless Steel Condition: Great cosmetic condition with little to no signs of previous use. SEE PHOTOS) Tested: Bearing blocks slide smoothly by hand. Warranty: 14 day right of Return SKU: 392474 Please review our Help page for all of our Terms and Conditions before bidding or purchasing. By bidding or purchasing our merchandise. You are agreeing to these terms and conditions. Questions? Send us a message SALE TERMS AND ... moreCONDITIONS: Only the pictured items are included in the listing. If it is not pictured or mentioned in the description it is not included. Place a bid only if you intend to purchase the item. If payment is not received within 3 days. The item(s) will be relisted at our discretion. PAYMENT INFORMATION: Payments are expected in a timely manner. Please contact us in the event that payment cannot be made within three days. Payment arrangements can be made. We accept: PayPal. All Major Credit Cards, and Bank Wire Transfers in USD(There is a $25 wire transfer fee) A 8.75% Sales tax applies to CALIFORNIA residents unless a resale tax ID is provided for our records. We cannot process the order until we receive sales tax or a copy of your tax ID. If you would like to pay using a credit card. Please call us at(408) 743-5609. Resellers Click Here* WARRANTY: Please see listing above for the warranty that applies to this item. AS-IS. No Warranty: When an item is stated as being AS-IS. The condition of the item is either unknown or has known issues(as stated in the description) and does NOT carry any warranty and NO returns will be accepted for this item. 14-Day Right-of-Return: You have fourteen(14) days to contact us for a replaceme
|
|
|
Micro controlle positioners 2 pieces Through hole 1 7/8 approximate. Posted with eBay Mobile Posted with
|
|
Questions? Call us: 1-877-328-9236. Crown Right Angle Gear Drive Zero-Max(2) 139-801-G1 w/ Hand Wheel& Screw Rail. Manufacturer: Crown Model: Various Condition: Used Price: The photos show the exact item(s) the buyer will receive. Manufacturer: Crown Condition: Used. Comes in non-original packaging. There are some scratches. Scuffs, and discoloration on the outer assembly from previous usage. The gear drive and guide rail are in fairly good cosmetic condition. Notes: When the gear wheel is turned and the bearing block moves along the screw rail. It moves in a noticeable zig zag type pattern. The screw rail is bent or needs adjustment as it should move smooth, straight, and true down the shaft. No further testing was performed. No manuals, cords/cables, or additional items are included ... moreif not listed or shown. Included: 1) Shaft, 2) Screw shaft, 2) Crown 139-801-G1 Right Angle Zero-Max Gear Drive, Specifications: Manufacturer: Crown, Model: 139-801-G1, Double sealed bearings, Ground ball bearings, Non-magnetic stainless steel shafts, Aluminum alloy housing, 1:1 gear ratio, Shaft length: 25.75" SKU: N16N005 For questions regarding this item. Please reference the SKU to help us better serve you. Questions? Give us a call. 877) 328-9236 or(512) 933-0081 Monday to Friday 8:30 am- 5:30 pm CST. Se habla espanol! DougDeals is an ISO 14001 and OHSAS 18001 registered company. DougDeals Terms and Conditions DougDeals Terms of Use. By bidding. Purchasing via Buy-It-Now or submitting a Best Offer you agree to the DougDeals terms of use located at: Payment. Paypal Orders are shipped to the confirmed PayPal address. DougDeals accepts PayPal from select countries. Visa. Mastercard, Discover, American Express Orders are shipped to the card holder’s billing address. A signed is required for orders over $1.000. DougDeals directly accepts US and Canadian issued credit cards only. DougDeals accepts international cards via PayPal. Shipping. Free Shipping is to the contiguous 48 states only. AK. HI, and territories will
|
|
|
IAI Linear Actuator Controller ERC I/O BOX RS232 Port Menual 2PC controllers working TESTED NOT RETURN NOT REFUND. INTERNATIONAL SHIPPING INFO: Free Local pickup. Contact Seller for Shipping Quote
|
|
|
You are bidding for: 1 pcs Ball Srew + Support mounting unit. High Quality Detail Specification Brand: Kuroda Ball Screw length(mm) 170 Travel Length(mm) 38 Thread Dia. mm) 12 Pitch/Lead(mm) 4 Unit to tal weight: 1 kg Made in: Japan Item Condit ion Used. Great condition. No rust. Still rigid. Sold as is. Shipping- We will ship this item from West Java. Indonesia. We would ship to worldwide- After get payment confirmation. 1-2 days, we will pack and ship your item. We are using Registered mail for economy shipping and EMS(Express Mail Service) by PT. Pos Indonesia) for standard shipping. Please feel free to contact us if you need more information about our product. On Apr-05-13 at 00:53:06 PDT. Seller added the following information:
|
|
|