|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
$1.99 Shipping
Condition: New Location: Lorton, United States
1 Pcs Webster Needle Holder. Provides high degree of flexibility while conducting lab procedures. Suitable for a wide variety of laboratory applications. Starter sets for organic chemistry labs, distillation, separation, purification, and synthesis.
0 bids $259.00 Shipping
Condition: New Location: Rancho Cucamonga, United States
220V Laboratory Three Roll Grinding Mill Grinder For Lab Application. Maintly consists of two copper knife and copper knife holder. Prevent grind maerial to both ends overflow. Three rollers of the machine with chilled alloy casting, thickness of chilled alloy layer is 15 - 25 mm, surface hardness is HS68 ~ 75.
0 bids $4.00 Shipping
Condition: New Location: , United States
Dental visualizer JT-10. Dental Lab Surveyor. Complete set with handpiece holder precise angle. Fully adjustable. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
After the plaster is placed on the platform, it can be pressed down, the platform will be inclined downwards, and then the saw blade will leak out and cut the plaster. When the platform is pressed down to cut, the travel switch will be automatically energized, the saw blade will start to work; when released, the table and the switch will be reset, automatic power off, the saw blade will automatically stop, to ensure the safety of the operator.
0 bids $150.00 Shipping
Condition: Used Location: Garden City, United States
Manufacturer: Adec. Model: Monitor Mount. Item Includes: Only mount. Found it to be in good condition but it does not have any information about it anywhere on it. Pushing through as fully functional, cleaned and sent to photo.
0 bids $95.00 Shipping
Condition: Used Location: Garden City, United States
Manufacturer: SprintRay. Item Includes: Tray moonray. Model: MoonRay S. Hooked up unit correctly and turned on. This unit is fully functional. Technician Testing Notes. We can even help you find a technician in your area.
0 bids Free Shipping
Condition: New Location: , United States
This state-of-the-art machine is a must-have for any dental professional. Enhance your dental lab's efficiency and with this indispensable tool. Main unit 1. FDA declaration .
0 bids Free Shipping
Condition: Used Location: Fort Lauderdale, United States
The 07721603 Foot Switch Monoplane for 14/64ct Siemens Axiom Artis Cath/Lab is a specialized device designed for use in the healthcare industry, specifically for Siemens Axiom Artis machines. This foot switch allows for easy and precise control of the monoplane during medical procedures, providing a comfortable and ergonomic solution for healthcare professionals. With a focus on high-quality and reliable medical equipment, this product is essential for efficient and accurate operations in a clinical setting.
0 bids Free Shipping
Condition: New Location: , United States
This injection system is composed of a heater and a hot press. The heater will make a beep sound when it finishes heating. Structure and working principle The function of the hot press is that it injects the molten material into flask.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
27 Pegs Laboratory Drying Rack Lab Draining Peg Board Rack Wall Mount PP. 27pegs drying rack 2 X laboratory drying rack. There is a tray hole and a water outlet hose at the bottom for better drainage and leakage prevention.
Buy It Now
Free Shipping
Condition: New Location: Victor, United States
Each product is carefully designed by a team of laboratory professionals and experienced engineers with quality and durability in mind. Two tapered wedges are provided to ensure firm grip on rods having dia.
0 bids $2.00 Shipping
Condition: New Location: Hebron, United States
Denshine Dental Slow Low Speed Handpiece Contra Angle Straight Air Motor 2/4Hole. Denshine E-Type Dental High Speed LED Handpiece Standard Head Push 2/4Hole CE. Denshine Dental LED High Speed Handpiece Standard Push Button 2/4Hole Turbine CE.
Buy It Now
Free Shipping
Condition: New Location: Newberg, United States
Buy It Now
$49.90 Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , United States
Description Good load-bearing and lifting characteristics make this motorized instrument table stand out among other optometry devices. Its simple and professional appearance adds a professional atmosphere to your glasses store. The product is used to store a slit lamp, auto lensmeter, or other equipment. It is a good helper for optometrists! Specifications Color: White Material: Iron, Aluminium, Plastic, Paintless Board Surface Treatment: Blister Paint Motor: Big Power AC Motor Wheel: Fine Wheel Plug: US Standard Power Supply: AC 110 V/ 60 Hz Loading: 15kg/ 33.07lbs Adjustable Height Range: 60-82cm/ 23.62-32.28in Table Top Size: （L*W）40*48cm/ 15.75*18.9in Package Size: 61*53*26.5cm/ 24.02*20.87*10.43in Net Weight: 19kg/ 41.89lbs.
0 bids $17.00 Shipping
Condition: Used Location: Seattle, United States
Nice piece of lab equipment. See my other listings for more.
Buy It Now
Free Shipping
Condition: New Location: Victor, United States
Jug features excellent optical clarity and easy to read, screen printed graduations. 100ml subdivisions. Features a spout for easy pouring, and handle with thumb grip for stable handling. br>Autoclavable, with superior chemical durability.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
0 bids $1.99 Shipping
Condition: New Location: Lorton, United States
Kidney shaped designs allows for it be held against the patient's body to catch any falling fluids or debris. Manufactured from AISI 420 surgical grade stainless steel. The tray's tall lip guards against spills and secures the contents of the tray.
0 bids Free Shipping
Condition: New Location: Ontario, United States
Application: Used for macro photography ( dental, jewelry, food, ect ). illumination distance: 5m. Tricolor LED Lamp, Triple Handles. brightness: 800Lm. color temperature 3000k-7000k. The design is simple and easy to operate.
0 bids $20.00 Shipping
Condition: New Location: Chino, United States
★ the Denture Injection Unit Consists of a Heater and a Hot Press. Press Dentistry Injection System 400W 110V 282-288 ° C. 3 the Heater Will Beep When It Is Heated. 1x Power Cord. 1x Hot Press. 2 the Function of the Hot Press Is to Inject Molten Material into a Previously Prepared Flask.
0 bids $5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , United States
Remarks: Before operation this therapeutic device need to connect with oil free compressor. Clean water bottle 600ML. 1 set. Saliva ejector. 1 set. 3-way air/water syringe. 1 set.
0 bids $10.00 Shipping
Condition: New Location: , United States
Main unit 1.
Buy It Now
$3.99 Shipping
Condition: New Location: Lorton, United States
1 Pcs Double Ended Spatula. 1 Pcs Bayonet Fine Serrated Tweezers 6". 1 Pcs Straight Micro Scissors 4.5". Provides high degree of flexibility while conducting lab procedures. Suitable for a wide variety of laboratory applications.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Fontana, United States
ETERFANT Wall Hanging Dental Turbine Unit 4 Hole with Weak Suction Work with Air Compressor. Designed for dental surgery, it effectively pressurizes air. - 1 x Rotatable Pylon(Radius of Rotation: 300 mm).
Buy It Now
Free Shipping
Condition: New Location: Victor, United States
Class B tolerance. Class B tolerance. Each product is carefully designed by a team of laboratory professionals and experienced engineers with quality and durability in mind. GREAT FOR PROFESSIONAL LABORATORIES, CLASSROOMS & HOUSEHOLD || High heat tolerance, and very good to excellent chemical resistance.
0 bids $8.00 Shipping
Condition: New Location: La Puente, United States
Product Description: ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. . ★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time. ★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists. ★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded.
0 bids Free Shipping
Condition: Used Location: Lincolnton, United States
from retired lab owner. in original box, may have never been used. Great condition with packing and papers.
Buy It Now
Free Shipping
Condition: New Location: Bensenville, United States
Check item specifics and photos to ensure you make the perfect choice.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Cranbury, United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle. Fully adjustable.
Buy It Now
Free Shipping
Condition: New Location: Victor, United States
This model is a detailed and vibrantly colored, hand painted 3D rendering that effectively shows the life cycle of angiosperms. This model represents the structures involved in the life cycle of a flowering plant, which allows students to visualize and better understand the process.
0 bids $13.32 Shipping
Condition: Used Location: EDINBURGH, GB
A triple output Switch Mode Power Supply recommended for use with a variety of Feedback Instruments equipment, including: Protections: Short circuit / overload Outputs. +5 V @ 1.0 A, +15 V @ 1.5 A, -15 V @ 1.0 A Operating temperature range: 0 to 45 °C Dimensions (net): width 190 mm x depth 130 mm x height 120 mm COMPLETE TESTED SYSTEM NOW AVAILABLE https://www.ebay.co.uk/itm/314129106660 for RRP see https://www.feedback-shop.co.uk/power-supply-5-v-15-v-01-100.html All equoment sold has been tested and is fully operational. See the other available science equipment. We require payment by paypal. All major credit and debit cards are accepted by paypal (no paypal account necessary). All our items are posted from the UK. We ship all items within 3 working days, usually faster. All items are.
0 bids $5.00 Shipping
Condition: New Location: , China
Nozzle size:0.8mm/1.2mm. 1 XSandblasting Pen.
Buy It Now
Free Shipping
Condition: New Location: Victor, United States
Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use. Autoclavable, with superior chemical durability and heat tolerance. Can withstand temperatures ranging from -20?.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Three rollers of the machine with chilled alloy casting, thickness of chilled alloy layer is 15 - 25 mm, surface hardness is HS68 ~ 75. Maintly consists of two copper knife and copper knife holder. Prevent grind maerial to both ends overflow.
Buy It Now
Free Shipping
Condition: New Location: Victor, United States
Suitable for use with liquid petroleum gas or butane gas. Equipped with tapered rifled tube connector that accepts 6-8mm tubing. Unique spring-operated gas safety lock is incorporated for the air/gas mixture.
Buy It Now
$45.00 Shipping
Condition: For parts or not working Location: Owings Mills, United States
The Medline Quincy Lab Model MSCWARMER12S ReadyBath 12 Slot Intelligent Warmer is a reliable and efficient solution for keeping specimens warm and ready for use in various laboratory settings. With its convenient 12 slot design and advanced warming capabilities, this product ensures that samples are always in the appropriate temperature range for optimal testing and analysis. Trust in the Medline brand to provide high-quality and dependable lab equipment for your healthcare and research needs. Unit Powers On. Does NOT include power cord. Unable to test unit. There is a small dent on the top front left corner. Please see pics.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Cranbury, United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle. Fully adjustable.
Buy It Now
$8.00 Shipping
Condition: New Location: La Puente, United States
Product Description: ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. . ★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time. ★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists. ★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded.
Buy It Now
$27.20 Shipping
Condition: New Location: Chino, United States
Features: Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg The package includes: 1X heater 1X hot press 1X picking stick 1X small top bar 1X Big Top Bar 1X Type Box 1X box wrench 1X power cord 1Xproduct brochure.
Buy It Now
Free Shipping
Condition: New Location: Miami, United States
We accept CARE FOR YOUR HEALTH. CHOOSE THE DEAL AND COMPARE PRICES.
0 bids Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Chino, United States
1 Duplicating Flasks. Used for compressor. model: 370023. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. (Amy-China-Beijing-86-13578947868).
Buy It Now
Free Shipping
Condition: New Location: Victor, United States
With this kit you will receive everything needed in one kit: 60cm Stainless Steel Rod, Powder Coated Base (20 X 12.5cm), Rubber Coated Burette Clamp with Boss Head, 50ml Burette. Kit Contains: 60cm Stainless Steel Rod, Powder Coated Base (20 X 12.5cm), Rubber Coated Burette Clamp with Boss Head, 50ml Burette.
0 bids $2.00 Shipping
Condition: New Location: , United States
This is a very well made flask for Dental Lab Press. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. only to United-States.
0 bids Free Shipping
Condition: New Location: Monroe Township, United States
Quiet, powerful, and highly durable, this is the perfect tool for any dentist! Intended Use/DisciplineDental Laboratory. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: Victor, United States
Each product is carefully designed by a team of laboratory professionals and experienced engineers with quality and durability in mind. Designed for use in professional laboratories, but makes an excellent addition to any kitchen.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including： 1*Plaster filter.
Buy It Now
Free Shipping
Condition: New Location: Victor, United States
Each product is carefully designed by a team of laboratory professionals and experienced engineers with quality and durability in mind. PREMIUM QUALITY || Test tube rack featuring a sturdy hardwood construction that will stand up to the wear and tear of the lab.
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids $10.00 Shipping
Condition: New Location: Chino, United States
Dental flexible denture machine is a 400W/110V dental laboratory equipment for making flexible removable partial dentures. ★ The denture produced by the invisible denture injection molding machine has almost no waste edge, and the grinding process can be completed at one time. ★The denture injection system is easy to operate, has a long service life, low maintenance cost, high success rate, and dental laboratory equipment for denture injection system, which is very necessary for dentists. ★ This machine is produced according to international standards. The operation is simple, time-saving, the casting success rate is high, and the common tooth box can also be injection molded.
0 bids Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Flexible Denture Material Injection System Injector Machine 110V. ★ The denture injection unit consists of a heater and a hot press. 3 The heater will beep when it is heated. 1X hot press.
|
|
|
|