|
Order by:
|
0 bids $2.99 Shipping
Condition: New Location: , China
· The sloping edge of the pot permits wax to drip back into the pot. · It can quickly heat the wax and keep in its liquid condition without changing its physical. · Even temperature throughout the pot.
0 bids Free Shipping
Condition: New Location: Chino, United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
Buy It Now
Free Shipping
Condition: New Location: , United States
Pitched Blade Propellor with Shaft, For Use With BDC1850, BDC3030, BDC6015, BDC2002, BDC2010, A161, Shaft Dia. 5/16 In., Shaft Length 16 In., Material Stainless Steel, Blade Dia. 2.5 In., Includes Blade Fastened to Shaft with Set Screws.
Buy It Now
Free Shipping
Condition: New Location: Fontana, United States
Capacity: 50L. Weak saliva suction device 1 set. 7, 600ml water storage bottle 1 set. Working Pressure For High Speed Hand Piece: 0.36Mpa. Working Pressure For Low Speed Hand Piece: 0.34Mpa. - Type: Air Pump.
Buy It Now
Free Shipping
Condition: New Location: Victor, United States
Constructed of glazed porcelain for strength, thermal performance, and enhanced chemical resistance. Tall form body with lid.
0 bids Free Shipping
Condition: New Location: Ambala G.P.O., India
This cell counter is featured with reliability, accuracy, stability and it is a sleek device. These are economical. DIGITAL BLOOD CELL COUNTER. The DURGA DG27 is a digital blood cell counter designed for use in biological laboratories.
Buy It Now
Free Shipping
Condition: New Location: Victor, United States
UNGLAZED STREAK PLATE || Single, unglazed porcelain streak plate. Off-white color. Single streak plate for mineral identification. Great for geology classrooms, earth science students and field geologists.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Salem, United States
The product is a NEW SEALED Millipore Quantum TEX Cartridge QTUM0TEX1 designed for the Milli-Q water purification system. It is manufactured by Millipore, a prominent brand in the healthcare and lab equipment industry.
0 bids Free Shipping
Condition: New Location: Cranbury, United States
Dental Lab Surveyor. Complete set with handpiece holder precise angle. Fully adjustable.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Lab Flexible Denture Machine Dentistry Injection Molding Machine 400w. Press Dentistry Injection System 400W 110V 282-288 ° C. ★ the Denture Injection Unit Consists of a Heater and a Hot Press.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental visualizer JT-10. Dental Lab Surveyor. Complete set with handpiece holder precise angle.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Fontana, United States
Designed for dental surgery, it effectively pressurizes air. - 1 x Rotatable Pylon(Radius of Rotation: 300 mm). - The foot pedal turns water on and off and allows you to keep both hands free while working.
Buy It Now
Free Shipping
Condition: New Location: Carlisle, United States
Tapered walls allow simple nesting for storage. BUILT FOR DURABILITY: Made from resilient polypropylene, this durable plastic tray resists chemicals and tough conditions, making it perfect for laboratories.
0 bids Free Shipping
Condition: Used Location: White Marsh, United States
Material: LenSx. OEM: Alcon Laboratories Inc. Freight quotes will be provided promptly upon request, or one can select Local Pickup and manage the transportation pickup and expense directly. SKU#: Inv-00529744.
Buy It Now
Free Shipping
Condition: New Location: Fullerton, United States
High Speed Handpiece Pipe 1pc. Low Speed Handpiece Pipe 1pc. Dental High & Low Speed Handpiece Kit 4 Hole. Portable Dental Unit with Air Compres s or. Model:BD-406 Portable Dental Unit. High speed handpiece.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Equipped with its own dust removal system, it ensures better sealing performance. Dental Automatic Power Sandblaster 1 Air hose connector 1. Sandblasting angle: Adjustable. The side of the machine is designed with a dust outlet, which can be connected to a vacuum cleaner for easy removal of dust generated during operation, ensuring optimal sandblasting performance.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Press Dentistry Injection System 400W 110V 282-288 ° C. ★ the Denture Injection Unit Consists of a Heater and a Hot Press. TypeDental Lab Flexible Denture Machine. Gross Weight: 30kg. 1x Power Cord. Gross weight30kg.
Buy It Now
Free Shipping
Condition: New Location: , United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including: 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: , China
✨Wide Range of Uses: Our selfie light's versatility extends dentistry. Dental Curing Light LED Resin Cure Lamp Style 2000mw/cm² 1 Second Curing Light. Dental Ultrasonic Piezo Scaler 2 Bottles Fits EMS Cavitron Woodpecker Handpiece.
Buy It Now
Free Shipping
Condition: New Location: Fontana, United States
ETERFANT Wall Hanging Dental Turbine Unit 4 Hole with Weak Suction Work with Air Compressor. Weak saliva suction device 1 set. 7, 600ml water storage bottle 1 set. Working Pressure For High Speed Hand Piece: 0.36Mpa.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including: 1*Plaster filter.
0 bids Free Shipping
Condition: Used Location: Garden City, United States
Item Includes: Abbott eReader+ drug Screening machine, 120 volt power cord, Micro USB cord. Model: eReader+. Manufacturer: Abbott. The sale of this item may be subject to strict regulation by the US Food and Drug Administration and state and local regulatory agencies.
0 bids Free Shipping
Condition: Used Location: Seattle, United States
Similar to EMD Millipore xx6700P05. Millipore xx6700P05 5 liter pressure vessel. Millipore xx6700L05 5 liter pressure vessel. Millipore xx670053 3 gallon pressure vessel. Dispensing pressure vessels hold liquid for filtration through Millipore pressure-operated filter holders, if connected to an external pressure source.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
Buy It Now
$53.01 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
The set includes A glass chamber 12 position cover with luer fittings Gasket 12 individual flow control stopcocks 3 posts 2 shelves 12 guide needles Vacuum gauge 12 retaining clips 4 supports 12 luer plugs.
0 bids $2.99 Shipping
Condition: New Location: , China
(The Tooth Dryeris used to dry the tooth surface. 2)Connect the AC adapter with the device properly,and insert the AC USB adapter plug to the power socket. 2)Press the button to turn ON/OFF the fan and light.
Buy It Now
Free Shipping
Condition: New Location: Victor, United States
Autoclavable, with superior chemical durability. Low temperature gradient - can withstand high temperatures & thermal shocks. Eisco Labs borosilicate glass has the following heat tolerances: Strain Point 515°C | Annealing Point 565°C | Softening Point 820°C.
0 bids Free Shipping
Condition: New Location: Chino, United States
400w Dental Flexible Denture Machine Lab Heater Dentistry Injection System 110v Product Description: ★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. . ★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time. ★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists. ★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded. ★.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
0 bids Free Shipping
Condition: New Location: Ambala G.P.O., India
The body is finished in epoxy powder coating.
0 bids Free Shipping
Condition: New Location: Lakewood, United States
Manufacturer Code: 8071. For repair of minor problems occurring most frequently in dental units. Includes: 1/4" & 1/8"Plastic Sleeves (10 ea.)., 1/4" Poly Sleeve (5), 1/4" Poly Nut & Sleeve (2), 10-32 Plastic Washer (20), 10-32 x 1/8" & 10-32 x 1/16" Plated Barbs (5 ea.).
0 bids Free Shipping
Condition: New Location: Ambala G.P.O., India
The product images shown are for illustration purposes only and may not be an exact representation of the product. We will solve your problem.
Buy It Now
Free Shipping
Condition: New Location: Victor, United States
Each product is carefully designed by a team of laboratory professionals and experienced engineers with quality and durability in mind. EQUILATERAL PRISM || Triangular equilateral prism. Made of high quality, polished acrylic material.
Buy It Now
Free Shipping
Condition: New Location: Victor, United States
Designed for use in professional laboratories, but is an ideal choice for science classrooms and household use. Product TypeScience Lab Funnels. INDUSTRIAL QUALITY || Made of chemical resistant polyethylene plastic.
Buy It Now
$5.00 Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: , United States
1 Plaster filter. you should consult with the FDA's Center for Devices and Radiological Health state and local regulatory agencies. If the item is subject to FDA regulation. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and.
Buy It Now
Free Shipping
Condition: New Location: Victor, United States
Jug features excellent optical clarity and easy to read, raised graduations and specifications. 50ml subdivisions. Features a spout for easy pouring, and handle for stable handling and convenient lifting.
Buy It Now
Free Shipping
Condition: New Location: Clermont, United States
0 bids Free Shipping
Condition: New Location: Brooklyn, United States
ALL 4 BOXES INCUDES IN SALE. PRICED FOR ALL 4 TOGETHER.
0 bids $18.00 Shipping
Condition: New Location: , China
Type:square base. Material:stainless steel,steel,iron,aluminum.
0 bids Free Shipping
Condition: New Location: Chino, United States
Dental Lab Equipment Plaster Trap Plaster Filter Gypsum Sedimentat Tank Gray Specifications: Material: Polypropylene Color: gray Product size: 38*28*26cm (14.96*11.02*10.23 inch) Product weight: approx 3.5kg Purpose: The gypsum separator is installed under the drainage system to collect floating objects, such as gypsum, resin, etc., and can prevent the drainage system from being blocked. Packing including: 1*Plaster filter.
0 bids Free Shipping
Condition: New Location: Miami, United States
5 SCALPEL BLADES #22. TEASING NEEDLE BENT CURVED. SET Details. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Dental Flexible Denture Injection Machine Lab Molding Heating Injection Device. ★ the Denture Injection Unit Consists of a Heater and a Hot Press. TypeDental Lab Flexible Denture Machine. 3 the Heater Will Beep When It Is Heated.
0 bids $14.99 Shipping
Condition: New Location: New Bedford, United States
Entire Lot of Laboratory Supplies
Buy It Now
Free Shipping
Condition: New Location: Hialeah, United States
Exceptions are stated below. PRIVACY AND PROTECTION OF PERSONAL INFORMATION Your privacy is important to us. They are required to maintain the confidentiality of the information and are prohibited from using that information for any other purpose.
0 bids Free Shipping
Condition: New Location: , China
Feature: 1. Item Type: 3 Prong Lab Clamp. With Rubber Coating: The jaws have a nonslip rubber coating to prevent scratches and breakage of glassware. Material: Stainless Steel, Rubber. If you are satisfied with our service, pls.
0 bids Free Shipping
Condition: New Location: Chino, United States
Perfect for streamlining workflows and enhancing productivity in dental labs. - Equipped with advanced features for precise and efficient dental laboratory workflows. - Easy-to-use interface for seamless integration into dental lab processes.
0 bids Free Shipping
Condition: New Location: Voorhees, United States
Adson Brown Tweezers Angled (Hole Handle) 12cm. If you are purchasing more than one item from us. PRODUCT GARUANTEE. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
0 bids Free Shipping
Condition: New Location: , United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
Buy It Now
$5.00 Shipping
Condition: New Location: Chino, United States
★ the Denture Injection Unit Consists of a Heater and a Hot Press. TypeDental Lab Flexible Denture Machine. Press Dentistry Injection System 400W 110V 282-288 ° C. 3 the Heater Will Beep When It Is Heated.
Buy It Now
Free Shipping
Condition: New Location: , United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications Voltage: 110V/60Hz ±10% Power: 100W Dimensions: 14x15x11cm.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
Quiet, powerful, and highly durable, this is the perfect tool for any dentist! HighlightsCompact Design,Unique Appearance,high reliability. Feature Creative Design,Durable Material,Beautiful Appearance.
Buy It Now
Free Shipping
Condition: New Location: Monroe Township, United States
This variable-intensity model vibrator is ideal for mixing plaster/gypsum, pouring models, and investing. Quiet, powerful, and highly durable, this is the perfect tool for any dentist! It comes brand new in original factory packagin and is covered by a one year warranty. Specifications Voltage: A)110V/50Hz ±10% Power: 100W Dimensions: 14x15x11cm Statement (FDA, ARTG) The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. If you have any problem. Please contact us through eBay Message and we will gladly assist you.
0 bids $49.90 Shipping
Condition: New Location: Monroe Township, United States
Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Features: 27pegs drying rack: Material: Polypropylene (PP) 6 rows of nails, staggered. 27 detachable dry nails, 5" (125 mm) long, 0.35" (9 mm) diameter. Built-in molded drain pan 22 inches (550 mm) x 4.8 inches (120 mm) The tray has holes for drainage and is fitted with a 30-inch (760 mm) vinyl tube. Rack 22 inches (550 mm) high x 16 inches (400 mm) wide Wall mounting brackets are included. Product size: 55 * 40 * 12cm Size of the hanging nail: 12.5 * 0.9 * 0.9cm The package includes: 2 X laboratory drying rack.
|
|
|