|
|
Order by: |
Buy It Now
Free Shipping
Condition: New Location: Wyoming, United States
This particular keg is the keg for the professional brewer. or if you just want to play one on T.V. Just fill and hook up, and you are ready to brew! It boasts style and substance. Its lightweight design and single steel handle make it easy to transport wherever the party is at.
Buy It Now
$5.95 Shipping
Condition: New Location: Buena Vista, United States
A complete set with hardware is included. After over 40 years of refrigeration service - I may know what you need…. not a used part that others had in their hands. Easy to install – connect the two wires plus ground (don't need an electrician!).
Buy It Now
Free Shipping
Condition: Used Location: Minneapolis, United States
This 5-gallon ball lock Cornelius "Corny" style keg has a dual grip rubber handle and rubber boot bottom. It has seen its fair share of parties but cleans up pretty well, and we would know because we have done the work for you.
Buy It Now
Free Shipping
Condition: New Location: El Paso, United States
Start your DIY kegerator tour! The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. D-System Keg Coupler. A pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
0 bids $25.00 Shipping
Condition: New Location: , United States
We bring over a decade of experience and knowledge from the brewing and beverage industry online. We're committed to continually bringing unique and exciting beverage products and appliances to you at great low prices.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
All you need is a cooler, drill, and our Jockey Box Stainless Coil Kits to build your own high quality draft dispensing system. Serve cold draft beer in style at your next party or event. Custom jockey box coils and coolers are available.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
All you need is a cooler, drill, and our Jockey Box Stainless Coil Kits to build your own high quality draft dispensing system. Serve cold draft beer in style at your next party or event. Custom jockey box coils and coolers are available.
0 bids $50.00 Shipping
Condition: Used Location: Beaufort, United States
MICROMATIC 4 line FOB and CO2 regulator panel. Pre-assembled and ready to use.
Buy It Now
Free Shipping
Condition: New Location: Cherry Hill, United States
Introducing the Kegco Deluxe Hand Pump Pressurized Cleaning Kit! Simply unscrew the beer line off of the keg coupler, and screw this directly to the cleaning kit. Includes a High Pressure Hand Pump Cleaning Bottle, a 32 oz Bottle of Kegco Beer Line Cleaner, and a Nylon Beer Faucet Brush.The 1/2 Gallon Cleaning Bottle holds plenty of cleaning solution for you to keep your draft beer lines clean.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
304 or 316 Stainless Steel Available. approx- 9" high. Length of Coil: 50 feet. 1/2" Stainless Steel tubing 50'.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
Shank : This connects the faucet to the jockey box and serves as a secure passageway for beer to flow out. Coil : Stainless steel coils (part of the kit) are installed inside the jockey box. Beer flows through these coils and is chilled to the desired serving temperature.
Buy It Now
$20.00 Shipping
Condition: New Location: Bend, United States
(Tanks can be used for five years between hydro tests). • 10 lb aluminum Co2 tank - Powder Coated Black. 10 lb aluminum co2 cylinder + TUBULAR Protective carry handle.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
Our 3/8" X 120' coil has a 3/8" x 100' coil attached to a 1/4" x 20' coil to increase line restriction to decrease foaming and to slow the flow for even better cooling. Custom jockey box coils and coolers are available.
Buy It Now
Free Shipping
Condition: Used Location: Wyoming, United States
This 5-gallon ball lock Cornelius "Corny" style keg has a dual grip rubber handle and rubber boot bottom. It has seen its fair share of parties but cleans up pretty well, and we would know because we have done the work for you.
Buy It Now
Free Shipping
Condition: New Location: Bell, United States
Start your DIY kegerator tour! A convenient knob style pressure dial that can be adjusted without tools. Shutoff valve with built in spring loaded check valve to prevent beer from flowing backward into the gas lines.
Buy It Now
Free Shipping
Condition: New Location: Wyoming, United States
Nitrogen Keg Kit. Ball Lock Keg. New 2.5 Gallon Ball Lock Keg. This compact AMCYL keg may be small in stature, but it's big in performance! Just fill with your favorite beverage and you are ready to go.
0 bids $21.95 Shipping
Condition: New Location: , United States
Aluminum CO. Claims filed after 48 hours of receipt may not be honored. We bring over a decade of experience and knowledge from the brewing and beverage industry online. We're committed to continually bringing unique and exciting beverage products and appliances to you at great low prices.
Buy It Now
$20.00 Shipping
Condition: New Location: Bend, United States
(Tanks can be used for five years between hydro tests). 10 lb aluminum co2 cylinder + TUBULAR Protective carry handle. • 10 lb aluminum Co2 tank - Powder Coated Black.
Buy It Now
Free Shipping
Condition: New Location: Sandusky, United States
The exclusively designed cleaning pads are made of a 100% non-woven viscose material specially processed using air-spun technology. This makes the Keg Cleaner cleaning pads super absorbent, lint free, strong, yet soft enough that it will not scratch any fine surface.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
As a leading manufacturer of jockey boxes, all of our jockey boxes and dispensing kits use the standard beer industry specifications. (4) Beer Line Jumper Assembly for Jockey Box, 5/16" ID - 5 Feet. (1) CO2 Primary Regulator, Dual Gauge with 5/16" Hose Barb.
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
This kegerator tower kit includes a 5ft beer tubing, 1 D-system keg coupler, 1 dual-gauge CGA320 regulator, 1 tap wrench, 1 cleaning brush, 1 faucet cover, and a set of assembly accessories. VEVOR single tap kegerator tower kit serves a variety of beverages, featuring 8mm internal insulation foam that minimizes the impact of external temperatures, ensuring beverages like beer, kombucha, soda water, and carbonated drinks remain at the ideal temperature for a perfect taste.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
All you need is a cooler, drill, and our Jockey Box Stainless Coil Kits to build your own high quality draft dispensing system. Serve cold draft beer in style at your next party or event. Custom jockey box coils and coolers are available.
0 bids $25.00 Shipping
Condition: New Location: , United States
Specially designed by Kegco to include everything you'll need to pressurize and tap a D system keg. We bring over a decade of experience and knowledge from the brewing and beverage industry online. We're committed to continually bringing unique and exciting beverage products and appliances to you at great low prices.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
Sanke Keg Coupler. Complete Single Tap Jockey Box Kit-No Cooler. This kit includes all of the hardware that you need in order to convert your cooler to pour ice cold draft beer almost anywhere! 3" Cooler shank and 3 1/8" faucet shank.
Buy It Now
Free Shipping
Condition: New Location: Aurora, United States
This kit includes everything you need for a simple and highly portable dispensing setup. Just connect the 8" hand pump and pin or ball lock gas coupler to your keg and pressurize as needed. Then use the included picnic faucet set for quick, easy dispensing.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
The Back-Flush Hose Assembly can be used with the Blichmann Therminator to flush water back through, to clean out unit after use. Flush Out Cleaning Hose for Beer Jockey Box Coil Coolers - Assembled in the USA.
Buy It Now
Free Shipping
Condition: New Location: Aurora, United States
Build your own KEGERATOR or KEEZER! Our DIY Kegerator Conversion Kits make it easy to quickly and economically transform any suitable refrigerator or freezer into an amazing beverage dispenser! This high quality dual gauge CO2 regulator is perfect for draft beer dispensing, and ideal for kegerator conversions!
Buy It Now
Free Shipping
Condition: New Location: Aurora, United States
A quick way to make a high quality sampling tap! This stainless steel adapter lets you connect a beer faucet directly to a 1/4" MFL threaded corny keg beverage coupler, allowing you to easily dispense directly from your corny keg! Fits any standard beer faucet. Adapter only. Faucet and corny keg coupler sold separately.
Buy It Now
Free Shipping
Condition: New Location: Denver, United States
Start your DIY kegerator tour! The lever-handle design is easy to use - simply grip the handle and then down on the handle to couple the keg. A pressure relief valve makes this coupler even more convenient to use, allowing over-pressurized gas to escape before it enters your keg.
Buy It Now
$5.95 Shipping
Condition: New Location: Buena Vista, United States
Remove the old thermostat and unplug the three wires, and plug them in the new thermostat. NOTE #2: Programmable digital thermostats. Our new conversion thermostat is. Too many brewers lost a whole batch of excellent butfrozen beer!
Buy It Now
Free Shipping
Condition: New Location: Wyoming, United States
20 Cuft Nitro Tank. This compact AMCYL keg may be small in stature, but it's big in performance! Just fill with your favorite beverage and you are ready to go. Perfect for your favorite brews such as beer, soda, nitro coffee, cold brew coffee, cider, or Kombucha tea!
Buy It Now
Free Shipping
Condition: New Location: Lansing, United States
This kit contains all the seals, o-rings, and gaskets you need to fully rebuild a corny ball lock keg. Also includes tailpiece gaskets for keg couplers or draft shanks and nylon regulator gaskets for the KOMOS CO2 regulator.
0 bids Free Shipping
Condition: New – Open box Location: Brigantine, United States
TURBO CHILL BEER KEG CHILLER. DEMO UNIT. Condition is "Certified refurbished". Minor scratches on lid and bottom of thermos. Thermos is a common item and can be changed as long as it holds enough ice to surround the aluminum chiller.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
Very compact design can fit into small coolers. For very tight spaces you can clamp beer line directly to the tubing for reduced clearances. Choose which direction you would like it coiled (use one left and one right for a 2 tap jockey box).
Buy It Now
Free Shipping
Condition: New Location: Aurora, United States
Build your own KEGERATOR or KEEZER! Our DIY Kegerator Conversion Kits make it easy to quickly and economically transform any suitable refrigerator or freezer into an amazing beverage dispenser! This high quality dual gauge CO2 regulator is perfect for draft beer dispensing, and ideal for kegerator conversions!
Buy It Now
Free Shipping
Condition: New Location: Aurora, United States
With our easy-to-use Kegerator Conversion Kits, you can quickly and economically transform almost any refrigerator or freezer into an amazing beer dispenser! This high quality dual gauge CO2 regulator is perfect for draft beer dispensing, and ideal for kegerator conversions!
Buy It Now
Free Shipping
Condition: New Location: Bend, United States
This regulator is perfect for any application and performs well inflating tires without freezing, re-seating tires, running air tools and just about anything needing compressed Carbon Dioxide. • 10 lb aluminum Co2 tank - Powder Coated GLOSS BLACK.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
Choose which direction you would like it coiled(use one left and one right for a 2 tap jockey box). Custom jockey box coils and coolers are available. We are here to help you resolve these issues as quickly and easily as possible.
Buy It Now
Free Shipping
Condition: New Location: Cedar Rapids, United States
Item model number BF DDK. Specially designed by Kegco to include everything you'll need to pressurize and tap a D system keg. This direct draw kit includes everything you need to pressurize and tap a D system keg.
Buy It Now
Free Shipping
Condition: New Location: Wyoming, United States
And now you can have twice the value with this set of two 5 Gallon Ball Lock Kegs with built-in pressure relief valves. These particular kegs are the kegs for the professional brewer. or if you just want to play one on T.V.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
3/8" coils provide a larger beer capacity, and require less CO2 pressure for dispensing. Choose which direction you would like it coiled(use one left and one right for a 2 tap jockey box). Custom jockey box coils and coolers are available.
Buy It Now
Free Shipping
Condition: New Location: Bend, United States
All cylinders are current hydros and supplied with CGA320 valve installed. (Tanks can be used for five years between hydro tests). HIGH GLOSS CANDY BLUE DURABLE POWDER COATING .
Buy It Now
Free Shipping
Condition: New Location: Bend, United States
This regulator is perfect for any application and performs well inflating tires without freezing, re-seating tires, running air tools and just about anything needing compressed Carbon Dioxide. All cylinders are current hydros and supplied with CG320 valve installed.
Buy It Now
$21.95 Shipping
Condition: New Location: Ridgefield, United States
This aluminum block cold plate with Stainless Steel tubing completes your Jockey Box project. For use with your Jockey Box specifically where no electrical connection will be used, i.e., camping, tailgating, etc.Fittings not included.
Buy It Now
Free Shipping
Condition: New Location: Bend, United States
COMPLETE SOURCE CO2 SYSTEM + DUAL (2) 2 GALLON JERRY CANS WITH mounts! All cylinders are current hydros and supplied with CGA320 valve installed. The SOURCE 10 lb aluminum co2 cylinder system. 2 GALLON JERRY CANS WITH MOUNTS.
Buy It Now
$19.50 Shipping
Condition: New Location: Ridgefield, United States
Are you building a Jockey Box and looking for aCOLD PLATE to complete the project?. Let us know how we can be of service. without fittings, IF YOU WANT FITTINGS We have those listed too. 8" x 12" (Cold Plate).
Buy It Now
$49.00 Shipping
Condition: New Location: Ridgefield, United States
All beer and gas lines hook up to Keg and couplers. Professional Grade. Sold to all Big Beer Distributors. Let us know how we can be of service. Two 6' sections of 3/8" ID beer jumpers. From Coupler to back of Jockey Box.
0 bids $21.00 Shipping
Condition: New Location: , United States
For added convenience, Kegco has also included other premium features like a lightweight 5 lb. KEGCO PREMIUM KEGERATOR CONVERSION KIT COMPONENTS. Keg Coupler Kegco KT85D-L D System Keg Coupler. There is nothing else on the market quite like this Perlick beer faucet.
Buy It Now
Free Shipping
Condition: New Location: Aurora, United States
Lightweight and portable, great for parties! 24" Picnic dispenser faucet.
Buy It Now
Free Shipping
Condition: New Location: Aurora, United States
Use this mini CO2 regulator to quickly and conveniently pressurize your corny keg for serving. Lightweight and portable, great for parties! Threaded pin lock corny keg coupler - Gas Side.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
Use this item to add a draft line to your draft system, or to replace an old line. This long length of tubing ensures proper constriction to prevent foaming while dispensing. 15' of 3/16" I.D. Clear Beer Line Tubing.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
Save money over the cost of our assembled Jockey Box models! Serve cold draft beer in style at your next party or event. Our 3/8" X 50' coil has a 1/4" x 20' coil attached to increase line restriction to decrease foaming and to slow the flow for even better cooling.
Buy It Now
Free Shipping
Condition: New Location: Boise, United States
The Ball Lock Door Mount Kegerator Conversion Kit is designed for converting a refrigerator into a kegerator system. The kit is specifically designed for ball lock style kegs and is meant to be mounted on the door of the refrigerator. This conversion kit allows users to easily dispense draft beer from their kegs, making it a convenient option for homebrewers or those looking to have a draft beer system in their home or business.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
Our Jockey Box Cooler with Stainless Steel Coils is perfect for dispensing ice cold beer at any party or event. Simply fill the cooler with ice and water, attach your keg(s), and you are ready to pour cold beer.
Buy It Now
Free Shipping
Condition: New Location: Bend, United States
This regulator is perfect for any application and performs well inflating tires without freezing, re-seating tires, running air tools and just about anything needing compressed Carbon Dioxide. • 10 lb aluminum Co2 tank - Powder Coated CANDY BLUE.
Buy It Now
Free Shipping
Condition: New Location: Aurora, United States
High quality stainless steel faucet for long life and great performance! Pin lock corny keg beverage coupler.
Buy It Now
$5.95 Shipping
Condition: New Location: Ridgefield, United States
(Are you building a Jockey Box?. Can't find your old jumper?. Our beer jumper is special for five reasons 1) The wing nuts make it easy to attach to the back of the box and to the coupler. 3) Smooth inside bore to help fight foaming.
Buy It Now
Free Shipping
Condition: New Location: Bristol, United States
High quality, extruded aluminum body, Co2 splitter. 1 inlet, 4 outlets with check valves. Check valves prevent beer from ever backing up into the regulator. Four hose barb shutoff valves with built in check valves.
Buy It Now
Free Shipping
Condition: New Location: San Bernardino, United States
This Standard Tower Conversion kit is the perfect solution for those who are converting a compact refrigerator or converting a freezer into a kegerator. The lever-handle design is easy to use; simply pull out and then down on the handle to couple the keg.
Buy It Now
Free Shipping
Condition: Used Location: Wyoming, United States
Reconditioned 5 Gallon Pin Lock Keg. Pin Lock Keg. The 5-gallon pin lock style keg has a dual grip rubber handle (colors may vary) and rubber boot bottom. It has seen its fair share of parties but cleans up pretty well, and we would know because we have done the work for you.
|
|
|
Click To Enlarge. Manufacturer: Beverage-Air, Condition: Refurbished, The BM23 Keg Refrigerator is perfect for home or commercial use. This draft beer refrigerator offers full beer keg capacity. Is heavy-duty, has forced air cooling for ice cold draft beer dispensing. It is one of the highest quality units available! The unit is coated with black wear-resistant vinyl on steel. Top is made from heavy-duty stainless steel. Includes drip tray for easy cleaning. The inside of the unit features galvanized steel walls and ceilings. Reinforced floors and door sills are made from heavy-duty stainless steel for long life Magnetic door gaskets provide positive door sealing. The cabinet is insulated with foamed-in-place polyurethane which helps to provide maximum operating efficiency and strengthen the ... moreoverall construction. Lift-out heavy duty forced-air refrigeration system creates a steady flow of cold air through the complete product load and provides fast uniform recovery and cooling. Refrigerant used is R134a. Which is CFC free for full compliance to all environmental concerns. A 6' cord and grounded plug are provided. Features• Stainless steel interior floor. New Compressor. Black vinyl coated steel exterior. Specs• Net Capacity: 7.8 Cu Ft. Dimensions: 24"W x 37 1/2"H x 28 1/2"D• Weight: 167lbs. Power Cord dimensions: 6' 1/6 HP Compressor. 4.0 amps. 115 VAC Power Connection. Caster Dimensions: 4" Unit will hold and dispense one 1/2 keg. One 1/4 keg or one 5 gallon keg. Price $1.150.00 Availability In Stock FREIGHT CHARGE: $175.00(rate does not include New York City or Chicago) Call for quote if you need deliveries to these cities. The above Freight charge is for delivery to a Business(Not including Churches. Schools, or Hotels) without a lift gate. If you need a lift gate, you need to let us know prior to check out, as it is an additional charge($35) If you need a Special Delivery(School. Church, or Hotel/Motel) or a Residential there is an additional $85 Charge. There are NO ADDITIONAL cha
|
|
7 lb CO2 Steel Tank Suitable for most brew at home beverage. Carbonic& industrial applications including home brewed beer, soda, paintball and aquariums. This steel CO2 tank has a fresh hydro-test. New rust resistant paint and a new CGA320 CO2 valve installed! CGA320 is the industry standard CO2 valve connection for all your CO2 applications. Includes a co2 label to assist fillers. Yes. The size is odd and the dimensions are tall and skinny.yet we've received great reviews on this extra capacity cylinder. Beverage Elements offers new and re-certified cylinders that meet all required Department of Transportation specifications. A properly re-certified cylinder is like new! It's important that every re-certified cylinder be inspected and tested by a DOT(Department of Transportation) ... moreauthorized service center. All cylinders offered by Beverage Elements have been certified by one of the largest cylinder service centers in the United States with over 30 years of experience in cylinder maintenance. In order for a service center to maintain a DOT license to certify cylinders they must adhere to the same strict quality standards as the original cylinder manufacturer: Hydro-testing cylinders well in excess of their operating pressures; Ensuring no rust or pitting is on the cylinder prior to painting with industrial paint with rust inhibitors; Proper valve type. Safety pressure rating and correct valve installation. See the for more CO2 tank sizes both Steel and Aluminum. Beer Gas tanks, as well as used corny kegs! All reconditioned tanks offered have been hydro-tested within 120 days of shipping. Includes Valve that meets CGA 320 specifications with male threads. Measurements– 4” Diameter x 29 3/4” Tall w/ valve. All CO2 cylinders used to deliver gaseous(vs. liquid) CO2 should be operated in an upright position in order to avoid expelling liquid CO2. If you have questions feel free to contact us. Visit My eBay Store: Beverage Elements 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13e
|
|
PLZ DON'T BID IF YOU DONT WANT TO PAY. You are bidding on LOT OF 4 SHURFLO BEER PUMPS WITH 5 Y CONNECTIONS. MOD# 166-257-16 It work when removed from a closing down business. As seen in pic selling as is. Welcome to Bargainsfoodequipment where you can get the restaurant. Food service equipment at cheap price. We have 25000 sq ft ware house located in Battle Creek, Michigan. We are one of the biggest used restaurant equipment reseller in South west Michigan specializing in Restaurant, Bakery, Pizza, Ice cream and Grocery Deli Supermarket equipment. We work closely with repo company and bank so we are able to get the equipment at low prices which we are able to pass on to you. Why buy new? Save BIG $$$$ here. Thank you for visiting our store and May you all have The Happy Life. We ship to ... moreyour paypal shipping address or make sure you individually email for different shipping address. Why pay $ more for brand new one? Here is used condition with the cheaper price. Please call 616-638-2465 for more information and faster service. Also click this link to save big $$$$$ for restaurant equipments. Indoor, outdoor lightings, household goods, tools and more. For our store inventory. Please visit our pro store Bargainsfoodequipment.COM e and save money here. Thank you very much for visiting our store. Bargains-R-Ours offers the following Policy: PAYMENT OF ITEMS We accept PayPal and other payment methods. Payment must be completed within 5 days of sale end We will send you final notice if we don't receive the payment 7 days after of the sale and report to eBay team to dispute your account then re list it If you are not so sure to pay. Please don't waste your or our time. You agree to pay 15% restock fee if you don't pay after you purchasing whether you or someone make mistake or have no funds available. If you live in Michigan we have to charge a sales tax of 6.00% SHIPPING AND CLAIMS Please check all items for damage before accepting them from shipper We ship any where in US and Canada. For Canada.
|
|
|
A rare find. Double tap Jockey Box used for Coca Cola products. or course other liquids could pass through! It pretty good shape overall. Hinges are strong, plate, coils, and taps seem fine. Not really much that can go wrong with these. It looks as though there was a third tap on the side at one point. BEST OF ALL. FREE SHIPPING AND HANDLING IN THE LOWER 48 AT BUY IT NOW PRICE EXCEPT WEST OF THE MISSISSIPPI ADD $ 40 TO COVER THE UPS FUEL SURCHARGE. sorry. Maine's not close! JUST CLICK BUY IT NOW, SIT BACK& WAIT FOR THE UPS MAN TO SHOW UP! ALWAYS FREE PICK-UP AT OUR PLACE! PLEASE VISIT OUR EBAY STORE OR COME CHECK OUT YOUR J OCKEY BOX#2 451 AT OUR WAREHOUSE FULL OF ANTIQUES. ARCHITECTURAL SALVAGE, AND FUNKY STUFF AT 170 ANDERSON STREET IN PORTLAND, MAINE. CALL FOR AN APPOINTMENT, 207-874-0700.
|
|
WOW!A RARE FIND INDEED with FREE SHIPPING These Rarely Make it to the Online Community as"Second Hand" Most are destroyed by contractors in a remodel because they don't know what they have in hand CABRO DRAUGHT 1000 Nitrogen Generator for Draft Beer We acquired this unit from a local Brew House that closed its doors. We are selling as USED. We are unable to check this unit out. Selling it as-is Included in this SALE a. USED Carbo Draught 1000 Panel b. 35 gallon Stainless Steel Receiving/Storage Tank Specifics 1. Manufacturer: Domnick Hunter 2. Model: Carbo Draught 1000 Your not going to find another second hand unit available online. Compare to New prices of over $16.000 We are offering this Used unit at $12.995.00 This Unit was developed to provide the highest quality draught ... morebeer for small to medium bars and restaurants. Dispensing up to 100 KEGS per month. This system has a 5 hour surge capacity of 9 Kegs(4 pints per minute. WHY CARBO DRAUGHT? You need Carbo Draught for one or two main reasons. You serve a nitrogenated beer like GUINNESS or BODDINGTON'S. You dispense some or all of your beers over the"balance point" the pressure above which 100% CO2 will over carbonate the beer) Carbo Draught will Keep the"nitro" beer properly carbonated, keep beers properly carbonated, regardless of time on tap, prevent beers from going flat, prevent beers from overcarbonation, prevent wasted beer in kegs, and reduce foaming problems due to temperature fluctuations causing foaming. SHIPS FREE TO THE LOWER 48 STATES ONLY TO A COMMERCIAL ADDRESS. We will not ship this Draught System to Alaska. Hawaii, Puerto Rico, Guam, Samoa, US Virgin Island, or Internationally. Ships Common Carrier via Carrier of our choice. On Jul-14-10 at 12:14:15 PDT. Seller added the following information: Froo www.froo.com | Froo Cross Sell. Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application. 6gf1.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*2%60%3E6gf1-13eb92ae22e
|
|
|
6"x 4" Stainless Steel Refrigerator Drip Tray 2" tall backsplash and no drain. The backsplash has keyhole shaped mounting holes that allow easy removal for cleaning. This is perfect for a refrigerator with two taps
|
|
|
10"x 6" Stainless Steel Refrigerator Drip Tray 2" tall backsplash and no drain. The backsplash has keyhole shaped mounting holes that allow easy removal for cleaning. This is perfect for a refrigerator with three or four taps
|
|
Ice refrigeration system Made of fiberglass. Stainless steel and aluminum. Insulated compartment for coil and ice. Compartment for 50liter/13Gallon KEG. KEG not included) 2.5lbs capacity CO2 cylinder(not included– available for $140) accommodates larger size cylinders. Set of manometers, max pressure 3 bar. Flow control faucet Out put capacity– 330 x 300ml glasses/hr Umbrella included. Cup dispenser. Coil: 12,7mm x 35mm, AISI 304 x 0.7mm, In/Out Line 01.01 Connection gauge BSP/G5/8I inch. 02 Tires with inner tube 3,25x8. Front wheel with inner tube 200x55. This unique concept for commercializing beer makes ice-cold beer available to the consumer in open areas such as events at the beach, poolside at resorts, stadiums, etc. Ice refrigeration gives cart total mobility, no electricity necessary. ... moreDimensions: H: 45in/ 1143mm W: 35in/ 889mm L: 58in/ 1473mm Net weight: 150lbs/68kg Video: http:www.youtube.com/watch?v=d0Hr9sHG-G8
|
|
Adventures in Homebrewing(313) 277-2739 This chrome beer faucet will work with both homebrew and commercial keg systems. Works with shanks and towers. Use with a faucet adaptor and attach it right to your homebrew keg disconnect! Works with all standard(3/8" 16) tap handles If you need any other supplies. Please call us(313) 277 2739 for any add ons. Adventuresinhomebrewing.com has everything needed for your home tap system and all of your homebrew supplies! Shipping Policy Shipping Time- Most orders received before 12:00PM EST will ship the same day. Provided the product ordered is in stock. Most orders received after 12:00 PM EST will ship the next business day. Orders are not processed or shipped on Saturday, Sunday, and Monday, except by prior arrangement. We cannot guarantee when ... morean order will arrive. Consider any shipping or transit time offered to you by Adventures in Homebrewing or other parties only as an estimate. We encourage you to order in a timely fashion to avoid delays caused by shipping or product availability.
|
|
SquareTrade © AP6.0 You are bidding on one previously owned Wunder Bar Oil dispenser cart on casters. NSF. Model WB-ODW-1-1-PC4. Serial number 12202-004, 115volts, 1 phase. Overall dimensions are approximately 27 1/2"x24 1/2"x36"ht) Unit is used and has normal wear of used equipment.surface scratches, dings, dents and will required some extra cleaning. Inventory number: R94015. Buyer must pick up at our warehouse or make arrangements for shipping. WE DO NOT PROVIDE SHIPPING QUOTES OR MAKE SHIPPING ARRANGEMENTS ON FREIGHT ITEMS. Buyer must make shipping arrangements for freight items. You may email Roy Spencer at Freightquote. Or call him at(800-323-5441 ext 1496) Shipping weight is 131 lbs. Pallet dimensions are 4' x 4' x 3'ht) Buyer pays all shipping plus $55.00 ... morefor packaging/handling. PLEASE REVIEW OUR POLICIES BY CLICKING ON THE FOLLOWING LINK: http:stores.ebay.com/ABC-Restaurant-Equipment/PLEASE-REVIEW-OUR-POLICIES.html Your bid on this item confirms that you have read and agree to the Terms and Conditions of Sale. Feel free to check out our feedback and buy with confidence. Please e-mail with questions before bidding. Check our other auctions for more great deals. Good luck and happy bidding! We reserve the right to cancel any bid at any time from Ebayers with no feedback. Ebayers with no feedback must contact us before bidding or bid may be canceled without notice.
|
|
|
American Sankey D system Keg Coupler Tap Good working order Works on American standard kegs PLEASE FEEL FREE TO ASK ANY QUESTIONS YOU MAY HAVE
|
|
|
American Sankey Tapping Tube for Full Size Keg with spring clip.
|
|
You are bidding on a USED CONDITION HD COMMERCIAL"WUNDER-BAR" BAR LIQUOR AUTOMATIC DISPENSING CONTROL SYSTEM Note: These two control boxes is sold as one unit for this auction; they are capable to handle(2) pour stations; each box have its own transformer. MAKE: AUTOMATIC BAR CONTROLS INC. MODEL# WB-16-4-A-111.48 SN# 4407-001 120v. 50/60HZ. 2AMPS. 24V out@10A AC UL CERTIFIED THIS ITEM WAS IN OPERATION WHEN REMOVED FROM A CLOSING BUSINESS. AS SEEN IN THESE PHOTOS. SELLING AS IS. ALL SHIPMENTS THAT MAY BE SHIPPED TO ALASKA. HAWAII, OR PUERTO RICO, MUST PAY ACTUAL SHIPPING COSTS. ID# 13-0120M LOC- UP5 Welcome to“Bargains“R” Ours Food Equipment” Where you can get Restaurant and Food Service equipment at a bargain! Our 35.000 sq. ft. warehouse, with over 4000 items, is located in Battle ... moreCreek, Michigan. We are one of the largest used restaurant equipment re-seller in South West Michigan specializing in Restaurant; Bakery; Pizza; Ice Cream Shop; Grocery Store; Deli; and Supermarket equipment. We work closely with Repossessing Companies and Banks, so we are able to get these equipment at low prices which we are able to pass on the saving to you. Why buy new? Save BIG $$$$ here! Thank you for visiting our store, and may you all have The Happy Life. We ship to your PAYPAL shipping address. UNLESS you contact us and tell us otherwise. Please call(269)963-3333 for more information and faster service(M- Fr/ 9-5 Eastern Time) If no answer, you may call(616)638-2465. Also click this link http:stores.ebay.com/BARGAINS-R-OURS to save big $$$$$ for restaurant equipment. Indoor, outdoor lightings, household goods, tools and much more! For our store inventory. Please visit our“pro-store” www.Bargainsfoodequipment.com and save money here! Thank you very much for visiting our store. Bargains-R-Ours offers the following Policies: PAYMENT OF ITEMS We accept PayPal and other payment methods. Please call us for specifics. Payment must be made within 5 days of winning bids. Or acceptance of your offe
|
|
Please read the descriptions carefully, So you know better what you are bidding on. Thanks! DESCRIPTION- This is a listing for a Draftec Advanced Acid Keg Beer Line Cleaner blue Tracer 32 oz Kegerator detergent liquid. This bottle has been already opened. But you get the bottle that is pictured so you can see how much liquid is left. Condition: This bottle has been already opened. But you get the bottle that is pictured so you can see how much liquid is left. Included: Auction is for just what you see in the pictures and what is described above. Nothing else is included. Welcome to the Treasure Hunt Store! We hope that your shopping experience with us is pleasant! We work hard to keep all of our buyers happy. So please give us a chance before giving us neutral or negative feedback. Most problems ... morein this business. If not all of them, have a happy middle ground or solution for both the buyer and the seller, if both parties are willing to work something out. Thanks! ALL OF OUR ITEMS ARE FROM A SMOKE FREE HOME! IF THIS ITEM DOESN'T GET A BID, THERE IS A CHANCE THAT WE MAY NOT OFFER IT AGAIN ON EBAY! CHECK OUT OUR OTHER AUCTIONS FOR MORE GREAT STUFF FROM: CLICK HERE: TREASURE HUNT STORE#1 CLICK HERE TOO: TREASURE HUNT STORE#2- SHIPPING& HANDLING CHARGES. ETC. Winning bidder pays for shipping and handling costs which for this item tota ls: FREE for United States addresses. this price does NOT already include insurance. 0.5) This item will be shipped via parcel Post SORRY. WE DO NOT SHIP ITEMS OVERNIGHT, OR NEXT DAY AIR, NOR DO WE SHIP C.O.D. Utah Residents must pay for SALES TAX. LOCAL PICKUPS CAN BE ARRANGED, BUT THE BUYER MUST STILL PAY FOR HANDLING COSTS AND SALES TAX. SORRY. WE WILL NOT ALLOW ANY EXCEPTIONS TO OUR POLICIES, OR TO THE TERMS OF THIS LISTING. INTERNATIONAL BIDDERS. PLEASE ASK US FIRST IF WE ARE WILLING TO SHIP THE ITEM TO YOUR COUNTRY, BEFORE BIDDING OR PURCHASING. THANKS. HOWEVER. WE DO SHIP TO US MILITARY BASES AROUND THE WORLD AND TO COUNTRIES SUCH AS PUERTO RICO. US V
|
|
Up for auction is a used Wall Mounted 30 Head Beer Tap Draft System. It is all stainless steel construction and includes the 30 head beer tap. 7 Regulators, 13 Taps, and some of the heads might need to be repalced. This item may have light scratches, etc, from use. Dimensions: 93" Wide. 9"Deep, 8.5" Height You are encouraged to call with specific questions. Please know what you are bidding on and ask questions if you are unsure. We can be reached by phone at: 303-289-5999 This item will need to be freighted. Straped to a pallet and or shrink wrapped etc. if it is not picked up locally. When inquiring about shipping costs please indicate if the delivery address is a commercial or a residential property. If it is commercial, specify if you have a loading dock or a forklift for ... moredelivery.We will only ship to the address listed with paypal, if you would like us to ship to a different address, please change the shipping address when paying. ITEM IS SELLING WITH NO RESERVE! Good luck to the winning bidder! We accept Paypal. Money Orders, Cashiers Checks, Visa, Mastercard, Discover& American Express. Item ships within 3 days of payment being received. Check out my other items! Be sure to add me to your favorites list! Terms of Sale: Returns are not accepted. All of our items are sold as-is. Most of our items are used so there is no warrantee expressed or implied on any item. We do our best to test what we can. But there are many items we cannot test. Most of the items come from working restaurants that have recently closed down or are government tax sale items. Everyone has different expectations of used equipment but you need to realize that if it is used, there will be flaws. We try to find as much info out about our items and pass that on to you in the listing(if we see a dent, we note the dent, etc) It is up to you to decide if this is the right equipment for your location and use. We accept no responsibility for shipping once it leaves our facility. Powered by The free listing tool. List your item
|
|
|
SINGLE LINE BEER KEG COLD PLATE 12 x 8 W025 2696.Thanks for shopping! Live Life!
|
|
You are bidding on a USED CONDITION"BERG CO" ASST. LIQUOR DISPENSING SYSTEM W/ 2 AIR PUMPS. 2.5GAL PRESSURIZED TANK MAKE: BERG COMPANY MODEL# AC S/N: 0680035/ 0676115 120v. 60HZ. 1Ph. UL. AND NSF CERTIFIED(2) OIL-LESS AIR PUMP" COMPRESSOR. MADE BY WAISCO INC. MODEL# CM124 S/N: 47024/ 41117(1) PRESSURIZED STAINLESS STEEL TANK/KEG" MADE BY: FIRESTONE STEEL PRODUCTS CO. MAX CAPACITY: 2.5GAL MODEL# NSDA-VS-01 MAX WORKING PRESSURE 30P.S.I. NOTE: SOME CONNECTING-PVC? PIPES WAS BROKEN IN DISMANTLING THIS UNIT FROM ITS LOCATION. THEY NEED TO BE REPLACED. THIS UNIT WAS IN OPERATION WHEN REMOVED FROM A CLOSING BUSINESS. THE PHYSICAL CONDITION. AND ALL ACCESSORIES INCLUDED WITH THIS ITEM, IS AS REPRESENTED IN THESE PHOTOS. SELLING AS SHOWN. FOR DELIVERY TO ALASKA. HAWAII OR PUERTO ... moreRICO, buyers are subject to a higher shipping cost. ID# 13-0145M LOC- UP5 Welcome to“Bargains“R” Ours Food Equipment” Where you can get Restaurant and Food Service equipment at a bargain! Our 35.000 sq. ft. warehouse, with over 4000 items, is located in Battle Creek, Michigan. We are one of the largest used restaurant equipment re-seller in South West Michigan specializing in Restaurant; Bakery; Pizza; Ice Cream Shop; Grocery Store; Deli; and Supermarket equipment. We work closely with Repossessing Companies and Banks, so we are able to get these equipment at low prices which we are able to pass on the saving to you. Why buy new? Save BIG $$$$ here! Thank you for visiting our store, and may you all have The Happy Life. We ship to your PAYPAL shipping address. UNLESS you contact us and tell us otherwise. Please call(269)963-3333 for more information and faster service. If no answer, you may call(616)638-2465. Also click this link http:stores.ebay.com/BARGAINS-R-OURS to save big $$$$$ for restaurant equipment. Indoor, outdoor lightings, household goods, tools and much more! For our store inventory. Please visit our“pro-store” www.Bargainsfoodequipment.com and save money here! Thank you very much f
|
|
Draft Beer Conversion Kit Faucet/ 6" Shank Kegerator/ Jockey Box I picked this up from a man sell off some of his things. I have never used it. Like all of the items we sell. This item is sold"AS IS" We sell a wide variety of used items. We try to describe them as best we can but we are not professionals. Nor are we experts on any type of items we sell. Most of the items we sell are used. When we sell a used item normal wear, scratches, signs of use should be expected. Most items will need a quick cleaning. We do not offer warranties or refunds. Should a refund be granted for any reason it will be less all the shipping fees. All items are sold"AS IS" All sales final. No returns. Shipping is a flat $ 12.35 in the 48 states. You are welcomed to come by& pick it up ... moreif you live close enough. Please ask any& all questions prior to bidding. Attention PAYPAL users* Due to paypals nonexistent seller protection policy I will only ship to the address paypal sends me NO EXCEPTIONS. I answer all emails. If you are not receiving my emails then check your spam filters on your email. Or that your email address is current with ebay.
|
|
Four Tap Home Brewing Basic Keg System. Kit Comes With Four Reconditioned Corny Keg. All Hoses and Dis-Connects are Assembled. Liquid and Gas Dis-Connects are Threaded and Connect To Hose Using Swivel Nut and Stem The Kit Includes: 1: new(empty) Aluminum 5 lb. CO2 cylinder 1: 2 gauge CO2 regulator connected to manifold with 3' of gas commercial 5/16 gas hose 1: 4 port gas distribution manifold with four shut-off and check valves 4: 4' pieces of commercial grade 5/16 gas hose with ball lock dis-connect. Swivel nut and stem. 4: 5' pieces of beer hose ball lock dis-connect with. Swivel nut and stem 4: Picnic Type Faucets 4: Cornelius style 5-gallon ball lock kegs. Reconditioned and pressure tested Everything in this kit is new(except the kegs) Kegs has been dis-assembled. Inside cleaned ... morewith a PBW solution, washed and cleaned on the outside, re-assembled with new o-rings on the dip tubes and poppets, a new o-ring is placed on the lid, and the kegs are pressure-tested. All decals,stickers and glue have been removed. The kegs you receive will not be the ones that are shown in picture. Kegs will be shipped with black tops and bottoms, other colors available upon request. However, please note there is a limited quantity of other colors. Please allow 5 to10 days for delivery. This kit can also be made to different specifications E-mail me at with any questions or comments.
|
|
Three Tap Home Brewing Basic Keg System. Kit Comes With Three Reconditioned Corny Keg. All Hoses and Dis-Connects are Assembled. Liquid and Gas Dis-Connects are Threaded and Connect To Hose Using Swivel Nut and Stem The Kit Includes: 1: new(empty) Aluminum 5 lb. CO2 cylinder 1: 2 gauge CO2 regulator connected to manifold with 3' of gas commercial 5/16 gas hose 1: 3 port gas distribution manifold with three shut-off and check valves 3: 4' pieces of commercial grade 5/16 gas hose with ball lock dis-connect. Swivel nut and stem. 3: 5' pieces of beer hose ball lock dis-connect with. Swivel nut and stem 3: Picnic Type Faucets 3: Cornelius style 5-gallon ball lock kegs. Reconditioned and pressure tested Everything in this kit is new(except the kegs) Kegs has been dis-assembled. Inside ... morecleaned with a PBW solution, washed and cleaned on the outside, re-assembled with new o-rings on the dip tubes and poppets, a new o-ring is placed on the lid, and the kegs are pressure-tested. All decals,stickers and glue have been removed. The kegs you receive will not be the ones that are shown in picture. Kegs will be shipped with black tops and bottoms, other colors available upon request. However, please note there is a limited quantity of other colors. Please allow 5 to10 days for delivery. This kit can also be made to different specifications E-mail me at with any questions or comments.
|
|
|
Beer Keg Tapping System complete with Anheuser Busch pressure tubing(5/16) and Micro Matic Gauges
|
|
|
Used Multiplex 4 faucet beer tower. Great functioning oder. Has a few paint chips displayed in the pictures. Comes with the 3 regular faucets and the one for stouts or dark beers. Great for professional or home use. New 4 faucet taps run close to $1000. Save a little money and buy this used one and use the rest to get the beer flowing. Thanks For Looking(Shipping is flat rate $50 dollars. When I go to actually ship the item I will confirm actual cost and you will be charged that. I will also send a receipt to prove shipping costs. I will confirm with you first if shipping is any more than $50.
|
|
|
I bought this from a woodworking company that went out of business. These are New high quality Saw Blades with Tungsten Carbide re-enforced tips. The arbor is 3/4" and the blade is 8" I offer reduced shipping when buying more than one. Each additional blade will be $2.50 in extra shipping. Works for cutting Wood. Plastic and Metal. These are high quality blades that normally cost $60 per blade. These are multi-purpose and will cut wood, metal or plastic.
|
|
|
10" Draft Beer Wall Shank Used. But in very good condition. Some minor wear marks, but no corrosion or damage to the threads, so this shank has lots of life left in it! Auction includes all the mounting hardware(collar nut, plastic flange, compression nut) 10" Long. 7/8" Diameter. 1/4" Bore.
|
|
YOU ARE LOOKING AT A LOT OF 3 MICRO MATIC BEER KEG/DRAFT BEER TAPS/COUPLERS SPECS ARE AS FOLLOW: STAINLESS STEEL SK 184.03. KEG D SYSTEM COUPLER TAP. UNITS ARE USED BUT IN VERY GOOD COSMETIC AND WORKING CONDITION. GREAT DEAL. CATCH IT FAST! PLEASE READ AHEAD FOR ADVISEMENT AND CONSENT BEFORE PURCHASE OR BID: COMPANY: WE ARE A SURPLUS/LIQUIDATION SELLER. WE LIST AND DESCRIBE TO THE BEST OF OUR ABILITY AND KNOWLEDGE. IF YOU HAVE A QUESTION DO NOT HESITATE TO ASK WE WILL GIVE YOU THE BEST ANSWER POSSIBLE. WE ARE A BUSINESS AND ONLY OPERATE MONDAY THRU FRIDAY, PLEASE WAIT FOR A BUSINESS DAY FOR COMMUNICATION AND RESPONSE TO ANY MESSAGES OR CONCERNS ITEM CONTENTS: ONLY WHAT IS PICTURED AND DESCRIBED IS INCLUDED. IF IT IS NOT PICTURED OR LISTED IN DESCRIPTION IT IS NOT INCLUDED. TERMS: ALL ITEMS ... moreNEED TO BE PAID FOR WITHIN 72 HRS. OF AUCTIONS END/ BUY IT NOW. IF REQUIREMENTS ARE NOT MET YOU FORE-FIT YOUR RIGHT TO THE ITEM. AFTER DEADLINE POINT WE HAVE THE RIGHT TO REFUSE SALE AND CANCEL THE TRANSACTION AT ANY GIVEN TIME. PACKAGING: WE USE NEW AND USED PACKING MATERIAL(DEPENDING ON WHAT’S AT HAND AT THE MOMENT) TO SHIP OUT ANY AND ALL ITEMS. WE USE ANY MATERIALS FROM BUBBLE WRAP. NEWSPAPER, PACKING PEANUTS, TO PAPER. WE DO THIS TO RECYCLE MATERIAL AND BE ABLE TO HAVE COMPETITIVE PRICES. PLEASE BE ASSURED ANY USED MATERIAL WE USE WILL ENSURE PROPER PACKAGING AND IN NO WAY WILL WE EVER SHIP OUT YOUR ITEM IN AN UNSAFE MANNER. SHIPPING: WE ONLY SHIP TO THE CONTINENTAL/CONTIGUOUS 48 STATES. ALL ITEMS ARE SHIPPED WITHIN 48 HOURS OF PAYMENT CLEARING. INSURANCE COVERAGE IS ONLY INCLUDED IN SALES TOTALING $99.99 AND UP. TRACKING NUMBERS ARE PROVIDED ON REQUEST AND VIA PAYPAL. RETURNS/REFUNDS: FIRST AND FOREMOST YOU MUST CONTACT US( 720-212-8328 OR 303-718-7834) AND STATE YOUR CONCERN BEFORE MAKING A RETURN. RETURNS MUST BE MADE AWARE OF AND ARE ACCEPTED WITHIN 14-DAYS OF ITEM BEING DELIVERED. ITEM/S MUST BE SHIPPED BACK WITH THE ORIGINAL CARRIER UNDER THE SAME DELIVERY METHOD(I.E. IF IT WAS SHIPPED USPS PARCEL SELECT IT M
|
|
|
Good condition. Reach me for comments/questions 8one89one3397one. Posted with
|
|
MAD COW The Tippy-Dump sculpture is named after it's tipping Mash Tun. Place a garbage can on the built-in step and dump away after the brewing session is over. A nice benefit of the Tippy-Dump design is the placement of the Hot Liquor Tank under the Mash Tun. Excess heat rising above the Hot Liquor Tank helps keep the Mash Tun warm during the Mash. This comes with 26 Gallon Kettles. If you plan to mostly make 15-20 gallons at a time this is definitely the BrewSculpture for you. A folding handle allows you to pick up and move the system in a wheel barrow fashion. Easy to move. Yet very stable in brewing position. Pros: Smaller footprint than the Flat Sculptures. Gravity from Mash Tun to Boil Kettle makes for an easy sparge. Built in casters for easy movement. Dump your mash after the brew ... moreis over. Built in Step for easy access to Mash Tun. Cons: Taller than the 2100 Flat System. You do have to use the step to mix grains into the Mash Tun. Base Dimensions: 61" Tall(Does not include height of kettles) 23" Deep 48" Long This Digital Tippy-Dump Sculpture features: Stainless Steel Maximizers and Diverter Analog Thermometers High Flow March Pump Stainless Steel Sparge Arm Assembly 304-Brushed Stainless Steel Frame Control Panel Mash Tun and Hot Liquor Tank Float Switches Mash Tun and Hot Liquor Tank Digital Temperature Control Propane Gas System(Compatible With Low and High Pressure Propane) Automated Hot Liquor Tank burner Boil Kettle Whirlpool Arm Convoluted Heat Exchanger All Necessary Tubing Accessories Two Mini Brew Conical Fermenter with Thermometer and airlock kits. Eight Kegs with repair seal kits. CO2 tank, Pressure Gages, valves and connectors to multiple kegs. Lots of extras: Custom Electric malt mill. 45 Seat Rotating Red Bottle Tree. 2 Bottle Washers. Bottle Capper- Red Plastic with Magnet. Counter Pressure Bottle Filler. Portable Refractometer. 2 Star San- 8 oz. PBW(Little left. Clean a few times) White Scrub Pads. Brush- Beer Bottle. Line, Wine, Keg. Stainless Scrub Pads. Extra parts-
|
|
|
Used but in excellent condition. Only selling because I got a double tap jockey box. It was only used a couple of times. Works perfectly. CLEAN. 50' stainless steel coil keeps more beer cold! Always flushed it out with star san after use. Never let old beer sit in it. Tap handle not included(you can buy one for $5 or add on you already have)
|
|
|
Up for sale is a Kegerator convertion kit. Everything you need. Except the keg and co2 bottle not included* This set up is used but in good condition.
|
|
|
Used Kegerator includes tap. CO2 tank, Regulator with gage, tap lines, spill tray, brackets, cleaning kit and instructions.
|
|
|
I just borrowed this image. It's just one standard food grade co2. 20lb tank. Stainless steel. 100%funxtional Posted with
|
|
|
3/8 inch 50' Stainless Steel Coil for jockey box. Has been used. Still in great shape and ready to go.
|
|
ar) Perlick Tap Draft Beer Beverage Systems Nitrogen Generator Model 669N This nitrogen generator is in pretty good used condition with just some normal signs of use like scuffs and scratches. Most of the hoses were removed when I bought the unit. So I have no knowledge of its functionality outside of the the pump motor powering on and appearing to work without issue. This unit is being sold as is. Thank you for visiting our eBay store! If you have any questions. Just send us an email through eBay messaging. We strive to answer all questions as soon as possible. NOTE ON SHIPPING: Shipping is free and offered only to U.S. customers living in the lower 48 contiguous states. All items will be shipped within 1 business day of completed payment. Please note that this item will be palletized& ... morefreighted to ensure its safe arrival. The number code in parenthesis at the beginning of the title is an internal company inventory code. It is in no way affiliated with the actual title. Please do not hesitate to contact us with any questions or comments. Prompt. Friendly, and accurate service is our main priority.
|
|
|
Barrel wall mount beer tap dispenser. Give your place a great look. Perfect for that palace saloon look. Used but great find. Posted with
|
|
|
Stainless steel MicroMatic"slider" keg tap w/ Rodenbach logo handle. Comes with beer isolation valve as pictured. Rubber seal is intact and in good condition. This assembly is ready to slide on to a keg of Rodenbach or any other beer that uses the slider design. Questions? Hit me up. Cheers!
|
|
ESM LISTING FRAME(BETA) 100% Customer Satisfaction Guaranteed! | Guaranteed to be in good working order upon delivery. | Guaranteed NO DOA Parts( 14-Day Warranty Included) Cornelius Double Line 2 Pass Aluminum Keg Beer Cooler Cold Plate Motherboard Scrap CPU Scrap Memory Scrap Misc Board Scrap PC/Laptop Parts PRODUCT INFO/SPECS- Manufacturer: Cornelius Part(s) Warranty: 14-Day(NO DOA) Guaranteed Features: Double Line(2 Pass) Cold Plate System Estimated Package Weight: 18lbs Additional Information: Hoses/Tubing not included. But can be made available upon request. 14-Day(NO DOA) Warranty Included Quantity of this item is available. Please read below for additional information. FREE UPS Shipping(Continental United States Only) You are bidding on(1) Double Line(2 Pass) Aluminum Cold Plate. The ... morehoses/tubing is not included with purchase. You are bidding on the cold plate only as described in this listing. The plate has recently been cleaned. Flushed and cleared out out so everything should be working great& be fully functional. This cold plate is used and naturally shows some wear from previous use. We will guarantee it to be as described& fully functional upon arrival. Please feel free to email us with any questions regarding this or any of our other products listed for sale. We now have some tubing used with these cold plates available. So as an extra bonus. Upon purchase, we will throw in some tubing for free. So upon purchasing this item, please let us know and we will be happy to cut off a reasonable amount of tubing for you if you need it. Also. We have several more cold plates in our inventory that we need to do a little refurbishing to. If you are interested in more than one of these items just let us know or save us to your favorite sellers& be sure to keep an eye on our listings. Auction Terms: Your bid is a legal contract to buy. Payments are due within 48 hours after auction closes. Non-Paying bidders will be reported to eBay. We are not responsible for compatibility issues. We keep detaile
|
|
Beer is Fun! Refrigerator or Freezer Conversion to Beer Tapper-Temp Controller-Thermostat. It would be great to build your kegerator or beermeister or Keezer. It will fit your standard freezer or refrigerator. Not tested. Defects: See above.See photos. Condition: Worked when removed. I do combine shipping to save you $$$. If you do win two auctions. request a total" before paying. I will send you a combined invoice. Pay that lower cost invoice and I will ship right away! Does not apply to international sales. Height 4 inches Width 2 inches Material Metal Shipping Weight 1 lb.7 oz. About the Beer: As always I guarantee that you will be happy with your value. Thanks for looking! Check out my other beer stuff I have for sale! Thanks for your interest. waddinsky Noteworthy Feedback: 1. Awesome ... moreseller! great transaction. Super fast shipping; buy with confidence! 2. Worked extensively to fix order mistake. Thanks" Bitmap 3. Thanks! I love it! Kegerator Kit) And it was a great price for a great item! Bitmap Think Green Bitmap I use recycled packaging whenever possible. Drink Draft Beer-No cans or bottles ever make it into the environment! Saves energy too! Bitmap Bitmap Note: Any equipment that comes in contact with your beer should be thoroughly cleaned before use. My goal is for you to be a happy customer. When you are happy you will buy from me again. I strive for accurate descriptions. Courteous communication and great packaging. I ship as quickly as possible(mostly the next day after payment is received) If you have a problem or question please contact me and I will address it promptly. Once you feel completely happy with the value of your purchase. Please leave positive feedback.
|
|
|
Slightly used Johnson Controls refrigerator thermostat to keep your fridge/freezer at consistent temperature for lagering your homebrew. Just checked it out and it works great!
|
|
|
Commercial grade Insulated Keg cooler with co2 bottle and regulator and two keg connecters. This unit is set up to hold two kegs. Great for any indoor or outdoor event. Two draft towers.The cooler is 60x30x41 towers not in measurments. On Jun-11-14 at 10:26:59 PDT. Seller added the following information: This is like IDC draft cooler that sells for over 5000.00.
|
|
This is a used beer spigot without attachment. It needs to be cleaned prior to use. It measures 10.5" overall length. It is used and is being sold as is. We do our best to describe each item to the best of our ability. Many items come to us preowned. Questions contact 609-267-8923 x1018(Ask for Jerry in the eBay department) Please feel free to contact us with any and all of your questions. We describe each item as best as we can. Get in touch through eBay. Stop by, or give us a call. 609-267-8923 x1018 Paypal& Local Pickup Available Allied Recycling 2658 Rt. 206 Mount Holly. NJ 08060 We take pride in our listings and appreciate all of our watchers and buyers. We'd love for you to look around at our other items. Many of them are very unique-as we are in a very unique business. ... more609-267-8923 x1018(Ask for Jerry in the eBay department) The items we acquire we are able to test the functionality and assess the overall condition. Because some of these items come to us pre-owned we do not offer a return policy.
|
|
This is a used beer spigot with attachment. It needs to be cleaned prior to use. It measures 10.5" overall length. It has a generic beer handle on it. It is used and is being sold as is. We do our best to describe each item to the best of our ability. Many items come to us preowned. Questions contact 609-267-8923 x1018(Ask for Jerry in the eBay department) Please feel free to contact us with any and all of your questions. We describe each item as best as we can. Get in touch through eBay. Stop by, or give us a call. 609-267-8923 x1018 Paypal& Local Pickup Available Allied Recycling 2658 Rt. 206 Mount Holly. NJ 08060 We take pride in our listings and appreciate all of our watchers and buyers. We'd love for you to look around at our other items. Many of them are very unique-as we ... moreare in a very unique business. 609-267-8923 x1018(Ask for Jerry in the eBay department) The items we acquire we are able to test the functionality and assess the overall condition. Because some of these items come to us pre-owned we do not offer a return policy.
|
|
|
1" X 8" X 12" Aluminum Cold Plate. Has two independent circuits that can be configured as one.
|
|
|
Up for auction is a Perlick 4210-UL Refrigerated Glycol Chiller and power pack system that chills great. This unit will pump freezing glycol to chill your beer or soda tower for a 300 foot run. This auction is for the power pack and compressor. Power pack made by Perlick equipment company model 4210-ul hose range 300 feet 4 gal glycol reservoir tank. The hoses and beer lines are not included. Also included is 5 chrome finish double tap glycol Perlick towers all in good shape. This was a complete system with mounted secondary gauges for gas lines, everything is in good operting condition just needs a new home. Any questions or need more pictures feel free to ask. Thanks
|
|
|
Perlick 8 head draft beer system with glycol unit. Gas blender, valves, taps,etc Perlick Century 8 head draft beer system. Glycol ready 110V glycol system gas blender for long pulls and guiness is needed valves. Taps, matching drain pan This system is removed as a working unit. The bar was upgraded to a much larger system.
|
|
POSTAL PLUS CONSIGNMENT We offer an excellent return policy within the continental United States. If your item arrives damaged from shipping or is not as described in the auction. WE will pay the return shipping in addition to a full refund if notified via email within 48 hours of delivery. Buy from a Trusted Seller! WE ALSO ALLOW FOR LOCAL PICK-UP! Shipping cost listed is for Continental United States ONLY. Additional shipping costs will apply for all other locations( I ncluding Alaska and Hawaii) Please Email me prior to bidding for your shipping cost. We will also combine shipping for multiple purchases. Let us know during payment process. USED CATALINA 5LB CO2 TANK- This Tank is Pre-owned and in Very Good Condition. The Previous Owner Stated that the Item Was Last Serviced A Year Ago. ... moreTank is Being Sold as is and is Empty. Great For Charging Corny Kegs. Aquariums, and Kegerators. Technical Info Off Tank is Listed Above Please feel free to ask more questions or request additional photos. Check out my! Be sure to add me to your. FOR MORE AWESOME DEALS!
|
|
|
According to the manufacturer this system is between 5 and 10 years old. It is rated for 200' with 8 lines. It runs at 29 degrees utilizing one glycol supply line and one glycol return line. It will handle more beer lines, for example if you want 12 beer lines, it is rated for 100' feet, you use two glycol supply lines and two glycol return lines. Msrp is $1900. Low opening bid with no reserve sale. Please message me if you are interested and have questions. No shipping. Local pick up only. Paypal preferred. Thanks for looking.
|
|
|
Welcome! My used Co2 gas system that I used to fill my older Soda Stream dispenser. The older system bottles and units are no longer supplied. The system has two valves and a pin valve control. The tank will be shipped empty by UPS. Unless you can pickup. The tank has CO2 in it now. Maybe you can use it to fill paintball tanks. I don't know what kinds of tanks it will work on. Maybe with an adapter hose you can use it on the later soda Stream systems.
|
|
|
You are bidding on two beer taps. These come just as pictured with shanks and all. I believe one shank is about 5 inches not including the barb fitting and the other is 2.5 inches not including the barb fitting. They have had beer line cleaner and water ran through them to ensure they dont accumulate bacteria. I pulled them from personal kegerator to install 4 perlicks. Not sure if these are perlicks or not. Just standard faucets and shanks. Please ask any questions and good luck.
|
|
|
This listing is for 2 used pin lock posts; 1 liquid. 1 gas. Each post includes a poppet valve. These posts came off of a used pin lock corny keg that was converted to ball lock. The keg was in working order prior to their removal. It held pressure. And the posts worked as they should. Please ask all and any questions before you place a bid. I will answer all questions promptly. I will ship within the US only.
|
|
|
CO2 Two Cylinders Steel Tanks 11 lb. capacity Here are two steel tanks for CO2. Both tanks have an 11 lb. capacity.
|
|
|
Temp Control Unit The Dixell XR03CX unit is 230V power. We needed 120V unit and was purchased incorrectly so it has never been used in our pocession.
|
|
|
You are bidding on a genuine Cornelius brand cast aluminum 4 circuit cold plate. Used item; great shape. Stainless flare fittings shown included. Measures 15" X 10" X 1-1/2" thick. The photos show the cold plate you will receive. Packaged for added protection in transit to your"man cave" Buyer pays actual shipping cost via FedEx Ground or Home Delivery to any physical adress in the continental USA. USPS Parcel Select shipping is available for PO Box delivery if desired. Use the eBay shipping calculator for estimated cost to your zip code. Pick-up is welcome in Milwaukee. Wi. at no cost. Good luck. And.Thanks for looking! 3c0.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E3c0-146cc207458-0x106-
|
|
|
Lot of beer tapping equipment. Used and has signs of wear as seen in pictures. Pressure gauge missing glass. 2 coors light beer tap handles 1 tap right pressure gauge 2 faucets 1 grundy coupler other misc. items
|
|
|
Up for sale is a 35 lb CO2 Tank Steel cylinder see scan. test date is 10/08 TW Empty 64LB. new Superior valve also new safety.s&h is due to size and weight.I have more then one so if you want more then one send an e-mail.tank is about 48"tall with cylinder cap on. winner add's $ 5.00 more for s&h. I will check rates for price will be sent by ups or uspo or fedex. will send the lowest price I can find for the winner.good luck and check out my other auctions 2p5ddv.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2B26rk%3E2p5ddv-146d7076d0f-0x107-
|
|
|
Co2 5 lb cylinder cga 320 empty any questions please ask thanks!
|
|
Can easily be converted to single kegerator or dual pony kegerator I didn't want a kegerator that hat taps sticking out of the top so I made one that would carbonate and dispense my own homebrew. I just found out I am going back to school in the fall and cannot continue this hobby. This is a great Lagerer. Carbonation System, and Homebrew Dispenser that takes up little space and uses very little electricity. This Dispenser can also be customizable to your Home brewery. Comes with: Danby Refrigerator: DAR1102WE 11.00 cu. ft. Energy Star runs great! Dual system three valve regulator- for carbonating and dispensing lagers and Ales at the same time• 3-5 Gallon Kegs for kegging 3 separate homebrew batches• 2.5g Co2 Tank that is half full. 3- Perlick Removable Stainless Steel Taps-can totally ... morebe removed and disassembled for easy cleaning• Stainless Steel Drip Tray- it is also removable for easy cleaning
|
|
|
TRUE- 2-Door Keg Cooler Model No: TDD-2 Treat your customers to an ice cold. Refreshing beer from this True TDD-2 direct draw beer tap! This dispenser's spacious interior accommodates(2) half barrel kegs of your finest brews, while(2) 3" diameter stainless steel insulated tap towers allow easy dispensing and reduce product foaming. For quick temperature pull down and years of reliable service, it also boasts True's oversized, factory balanced refrigeration sysyem.
|
|
|
Item is exactly as shown in photos. There's rust which goes with normal wear and tear. If you need any additional photos please let me know and I'll send them or you can come and take a look. Item is used and working. Being sold"AS IS" This is local pick up only unless you arrange your own shipping. The item is located in Kimberly. Wisconsin. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*3A%3Cd%3Ff6%3E-146fe21a4be-0x105-
|
|
|
Jockey box with 2 selections and separate coils Regulator included
|
|
|
Autek liquor control system. 1 system can control two stations, over 100 different tips for the different bottles, two dispenser holders, 1 dispenser cord 1 power cord. Missing cords for the second unit tested the units and 1 works perfect the other one turns on but somehow the counter don't register may be a simple fix or use for spare part. US Shipping only. This item is sold as is condition. Invested $6500. Good luck:RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-1470e7a91ab-0x113-
|
|
|
Here is a 8 1/4 X 14 aluminum cold plate by Cornelius. It has 5 circuits. All fittings come with the plate. Great for a beer jockey box or its original use. A soda gun. I have the original soda gun still attached but all lines will be cut before shipping and WILL NOT be included. If you want it with everything intact let me know and we can work something out. Shipping to the continental U.S. only please since this is very heavy. Thanks for looking.
|
|
|
Two CO2 tanks and one tap up for auction. I don't know much about the age of these items. The tanks are empty and the blue part of the tap handle has a crack. The tanks measure 22" high and 27" high(I think they are a 10# and a 20# tank size) This auction is for pickup only. Pickup only. Ask questions before bidding. Payment requested within 5 business days via paypal. I request the items be picked up within 14 days of the auction end. Thanks!
|
|
Incomplete Kegerator Kit Up for auction is an Incomplete Kegerator Kit. This was originally purchased with the intent to build a Kegerator. But it never happened. All pieces have never been used. Comes with all the pieces that you see in the picture. This item came from a smoke free home. I found a manual for it here: From this site it appears to be missing the tools. Screws, bolts, etc, and items D G and K( The Ruber tower gasket, black rubber washer, and CO2 tank) it is also missing the top piece of the tower which you can see in picture 2 although this piece is not necessary for the kegerator to work. I accept Paypal only and I will only ship to your payment billing address.Once payment is received item will either ship same day or early the following day. No international shipping is offered ... moreat this time. No returns will be accepted. If you have any question please feel free to ask. Thanks for looking. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf54%3E-147354a36aa-0x112-
|
|
Selling a Micro Matic 1/3 HP glycol chiller for beverage chilling. This machine works great. I only used it for home brewing and it is more than I need. This machine is $2200 new. Very heavy. So I am selling for local pick up only. If you want to ship it, I will be happy to if you pay for it. Just know the stated shipping weight is 110lbs. Feel free to ask me any questions. Good luck! Specifications: Approval, ETL Listed, Maximum Distance To Tower, 125 Ft. Second Pump& Motor, Optional, Compressor, 1/3 HP, Compressor Cooling, Air Cooled, Capillary tube size, 054 x 112" Suction pressure, 18 PSI with bath filled at 32 degrees, Refrigerant, R-134a, Refrigerant Charge, 12 oz. Refrigerant Pressure, 185(Low) 235(High) BTUs, 2.600/H, Volts, 115, Plug Type, NEMA 5-15P, Amps(Startup) Amps(Running) ... more11.5, Bath Capacity, 11.5 Gallons, Pump Type, Gear with 1/3 HP Motor, Pump Capacity, 80 GPH, Dimensions, 28"H x 18"W x 26"D, Weight, 110 lbs,
|
|
Our Surplus Items Listed Here On EBay May Be Limited In Quantity. While We Do Our Best to Accurately Describe Quantities. We Occasionally Sell Out of Some Popular Items. Mr Beer Home Brewing System. Hard ware kit only(NO SUPPLIES) 2 Gallon Keg(Fermenter) with lid, 1 spigot, washer and nut, 8 reusable 1 liter plastic bottles, Bottle caps and labels. and printed instructions. Why buy manufactured beer make your own. all you need is a refill kit NOT INCLUDED Thanks for shopping with Wardens Supply Co. Please Read.This information will help with item and shipping information. Wardens Supply Company. A Mail Order Army Navy Surplus sales company, has been selling Genuine U.S. Govt. Surplus and Quality Outdoor Gear Since 1980, and selling on eBay Since 1999. We ship our eBay items to addresses in ... morethe USA and APO and FPO addresses. Our business hours are 10 am to 4 pm Eastern Standard time Most weekdays. Business days are days the U.S. Post Office is open. With the exception of Saturdays and Holidays when we are closed. During those hours we can usually be reached by email or telephone at 234-248-4124. We will answer your email or call during those hours. Our goal is 100% customer satisfaction. There is never a reason to leave us negative feedback as we will always work with our customers. We have been in the surplus business for over 30 years. We will cheerfully refund your bid price if you are not happy with an item or we have made a mistake on your order. If there are any questions before or after the sale. Please contact us before leaving feedback. For a shipping quote Click on"SEE MORE SERVICES" next to"Shipping" and under the price of the item to pick USPS Priority mail or UPS Ground shipping service. Enter the number of items you want for multiple purchases of the same item. To see a larger picture of the item. Click on the magnifying glass logo or"Enlarge" under the photo. For still more magnification click on the 100% icon in the lower right corner of the new photo window. Some phot
|
|
|
Commercial grade purchased from distributor fits Miller Kegs-should fit others-Little use
|
|
|
Cornelius 5 Circuit Aluminum Keg Beer Cooler Cold Plate Soda Coldplate w/fittings as shown. Good Shape. Guaranteed. Flushed years ago but I would again of course. 14"x8 1/4"
|
|
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 This is an Ammunition Component Box MK2 converted into a Jockey box. The inside of the box has been lined with tin to give it a double wall for better cooling. The double wall is ¾ of an inch. The faucet and inner brass parts in the box are mark Perlick Milwaukee. The inner tubing is plastic. Looks to be 75 feet. The end that would go to the barrel is marked TAP-RITE 406. The outside of the box is painted and shows signs of wear. The cover and the side of the box are marked Ammunition Component Box MK2 Mod 0. The outside measurements of the box are 15 inches wide, 12 ½ inches deep and 14 ½ inches tall. Read Prior to Bidding High bidder pays shipping cost of their choice. Calculated from one of the eBay ... moreshipping calculators provided in this listing. A tracking number will be given with every purchase. Combined shipping is available with most items, but my not be able, due to size of items. Local pickup is an option. I’m not an“Expert” in any field of the items I’m selling. I try to describe items to the best of my knowledge, and what I see. So if you feel that you need more details/pictures about any item, be sure to ask questions before bidding. Bid with confidence, and thanks for looking.
|
|
Please Read the WHOLE Description of Item. Although I don’t smoke or have pets. Many of my items have been previously used and I cannot guarantee that they have not been exposed to pets, smoke or perfumes. However, previously owned items are freshly laundered before being shipped. Please make all inquiries prior to bidding. I acquire my merchandise from many sources and I can't guarantee that they originated from a scent-free, smoke-free environment. Please consider this before bidding if you are allergic or sensitive to candles, gas grill BBQ's, cigarette smoke, perfumes, dry cleaning fluids, scented laundry detergent, fabric softener, burnt food, household cleaners, etc. Thanks! Now for the item that is up for bidding! I have up for your consideration a very nice 11 1/2" Perlick ... moreStainless Beer Faucet Chrome Shank Combo Kit. The tap is in great shape and handle moves back and forth nicely. If you have an old fridge with a thick door. No problem! This will fit it. Add your own tap handle and enjoy! Overall length is 15" This is a very heavy duty faucet and will last for many years to come! Check out my other auctions for all kinds of cool stuff. Please see pics for condition. If you have any questions. Please feel free to ask. Winner must pay 3 days after auction ends or it will be re-listed. Thanks for stopping by and have a great day! 643.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d71f%2B%3E643-1477fbe6c01-0x112-
|
|
|
This a used 2 passage cold plate that has been cleaned. Flushed and all water cleared out. It is in great working condition.This is part of a beverage dispensing system and can be used for fast chilling of water, soda, beer, wine or any of your favorite beverages. When you connect it to a bar gun or tap all you need to do is place it in ice to chill your beverages. It is 12 inches long by 8 inches wide and is 1 inch thick. It comes with 1/4 inch stainless fittings. No reserve price and Free shipping in the lower 48 states!
|
|
Beer is Fun! 9 oz Paintball style CO2 Tank + Regulator with Adapter for standard CO2 regulator. It would be great to take your small corny kegs to parties and outings.Will fit all standard Paintball Tanks.Regulator will fit all standard CO2 tanks. Cleaned and tested. Defects: Normal wear.See photos. Condition: Very Good. I do combine shipping to save you $$$. If you do win two auctions. request a total" before paying. I will send you a combined invoice. Pay that lower cost invoice and I will ship right away! Height 12 inches Width 7 inches Material Brass& Steel Shipping Weight 3 lb.15 oz. About the Beer: As always I guarantee that you will be happy with your value. Thanks for looking! Check out my other beer stuff I have for sale! Thanks for your interest. waddinsky Noteworthy Feedback: ... more1. Awesome seller! great transaction. Super fast shipping; buy with confidence! 2. Worked extensively to fix order mistake. Thanks" Bitmap 3. Thanks! I love it! Kegerator Kit) And it was a great price for a great item! Bitmap Think Green Bitmap I use recycled packaging whenever possible. Drink Draft Beer-No cans or bottles ever make it into the environment! Saves energy too! Bitmap Bitmap Note: Any equipment that comes in contact with your beer should be thoroughly cleaned before use. My goal is for you to be a happy customer. When you are happy you will buy from me again. I strive for accurate descriptions. Courteous communication and great packaging. I ship as quickly as possible(mostly the next day after payment is received) If you have a problem or question please contact me and I will address it promptly. Once you feel completely happy with the value of your purchase. Please leave positive feedback.
|
|
Beer is Fun! CO2 Paintball Tank Filling Station Filler.CO2 tank not included. It would be great to fill small paintball tanks.Will fit all standard Paintball Tanks.and standard CO2 tanks. Cleaned and tested. Defects: Normal wear.See photos. Condition: Very Good. I do combine shipping to save you $$$. If you do win two auctions. request a total" before paying. I will send you a combined invoice. Pay that lower cost invoice and I will ship right away! Height 1 inches Width 9 inches Material Brass& Steel Shipping Weight 2 lb.3 oz. About the Beer: As always I guarantee that you will be happy with your value. Thanks for looking! Check out my other beer stuff I have for sale! Thanks for your interest. waddinsky Noteworthy Feedback: 1. Awesome seller! great transaction. Super fast shipping; ... morebuy with confidence! 2. Worked extensively to fix order mistake. Thanks" Bitmap 3. Thanks! I love it! Kegerator Kit) And it was a great price for a great item! Bitmap Think Green Bitmap I use recycled packaging whenever possible. Drink Draft Beer-No cans or bottles ever make it into the environment! Saves energy too! Bitmap Bitmap Note: Any equipment that comes in contact with your beer should be thoroughly cleaned before use. My goal is for you to be a happy customer. When you are happy you will buy from me again. I strive for accurate descriptions. Courteous communication and great packaging. I ship as quickly as possible(mostly the next day after payment is received) If you have a problem or question please contact me and I will address it promptly. Once you feel completely happy with the value of your purchase. Please leave positive feedback.
|
|
|
Bought new in Mai- but have since expanded. So don;t need it anymore. Does make some popping noise, which is normal for KegCo fridges. http:www.homebrewtalk.com/f35/kegerator-started-making-popping-noise-171827/ Comes with homebrew ball-lock connectors- no CO2 bottle. Sold As-IS. Where IS. No refunds or returns. No shipping
|
|
This unit up for auction is a used K-WAY Syestems Glycol line chiller power pack for beer tap cooler system. This item may contain some scratches. Dings, etc. from normal use. Model: BC3-A. Serial: 23229. Made 9/2003. It measures 27" W X 18" D X 18" H. You are encouraged to call with specific questions. Please know what you are bidding on and ASK QUESTIONS if you are unsure. We can be reached by by phone at 303-289-5999. This item will need to be freighted. Straped to a pallet and or shrink wrapped etc. if it is not picked up locally. When inquiring about shipping costs please indicate if the delivery address is a business or residence and if you have a loading dock or if you will require a lift gate for delivery. Sometimes pickup is avaliable at your local terminal, if you ... moreare interested in picking your item up at your local terminal please indicate so. ITEM IS SELLING WITH NO RESERVE! Good luck to the winning bidder! I accept Paypal. Money Orders, or Cashiers Checks. Item ships within 3 days of payment being received. Check out my other items! Be sure to add me to your favorites list! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
Co2 5 lb aluminum cylinder cga 320.Cylinder is empty any questions please ask thanks! Test date is 7/2013
|
|
YOU ARE LOOKING AT A BLM2000"THE NEW CONCEPT IN BEER LINE MAINTENANCE" MODEL BLM2000C. SPECS ARE AS FOLLOW: INPUT VOLTAGE AC 16V. INCLUDES 1QTY CONTROL UNIT. 1QTY DOUBLE TRANSPONDER. 1QTY- SINGLE LINE TRANSPONDER. 1QTY AC POWER ADAPTER. 1QTY ELECTRIC LINE EXTENDER. UNIT IS USED BUT IS IN GOOD COSMETIC AND WORKING CONDITION. GREAT DEAL. CATCH IT FAST! PLEASE READ AHEAD FOR ADVISEMENT AND CONSENT BEFORE PURCHASE OR BID: COMPANY: WE ARE A SURPLUS/LIQUIDATION SELLER. WE LIST AND DESCRIBE TO THE BEST OF OUR ABILITY AND KNOWLEDGE. IF YOU HAVE A QUESTION DO NOT HESITATE TO ASK WE WILL GIVE YOU THE BEST ANSWER POSSIBLE. WE ARE A BUSINESS AND ONLY OPERATE MONDAY THRU FRIDAY, PLEASE WAIT FOR A BUSINESS DAY FOR COMMUNICATION AND RESPONSE TO ANY MESSAGES OR CONCERNS ITEM CONTENTS: ONLY WHAT ... moreIS PICTURED AND DESCRIBED IS INCLUDED. IF IT IS NOT PICTURED OR LISTED IN DESCRIPTION IT IS NOT INCLUDED. TERMS: ALL ITEMS NEED TO BE PAID FOR WITHIN 72 HRS. OF AUCTIONS END/ BUY IT NOW. IF REQUIREMENTS ARE NOT MET YOU FORE-FIT YOUR RIGHT TO THE ITEM. AFTER DEADLINE POINT WE HAVE THE RIGHT TO REFUSE SALE AND CANCEL THE TRANSACTION AT ANY GIVEN TIME. PACKAGING: WE USE NEW AND USED PACKING MATERIAL(DEPENDING ON WHAT’S AT HAND AT THE MOMENT) TO SHIP OUT ANY AND ALL ITEMS. WE USE ANY MATERIALS FROM BUBBLE WRAP. NEWSPAPER, PACKING PEANUTS, TO PAPER. WE DO THIS TO RECYCLE MATERIAL AND BE ABLE TO HAVE COMPETITIVE PRICES. PLEASE BE ASSURED ANY USED MATERIAL WE USE WILL ENSURE PROPER PACKAGING AND IN NO WAY WILL WE EVER SHIP OUT YOUR ITEM IN AN UNSAFE MANNER. SHIPPING: WE ONLY SHIP TO THE CONTINENTAL/CONTIGUOUS 48 STATES. ALL ITEMS ARE SHIPPED WITHIN 48 HOURS OF PAYMENT CLEARING. INSURANCE COVERAGE IS ONLY INCLUDED IN SALES TOTALING $99.99 AND UP. TRACKING NUMBERS ARE PROVIDED ON REQUEST AND VIA PAYPAL. RETURNS/REFUNDS: FIRST AND FOREMOST YOU MUST CONTACT US( 720-212-8328 OR 303-718-7834) AND STATE YOUR CONCERN BEFORE MAKING A RETURN. RETURNS MUST BE MADE AWARE OF AND ARE ACCEPTED WITHIN 14-DAYS OF ITEM BEING DELIVERED. ITEM/S MUST BE SH
|
|
|
On-site accurate gas blending. Standard Flow: Up to 20 kegs/hr. 10 kegs/hr. per blend) dispensed. More cost-effective than pre-mixed cylinders. Lager Blend: 60% CO2& 40% Nitrogen Stout Blend: 25% CO2& 75% Nitrogen- See more at: micromatic.com
|
|
SINGLE Tower Refrigerator to Kegerator Conversion Kit- NO TANK-BLACK- USED TOWER REFRIGERATOR CONVERSION KIT THIS KIT LOOKS LIKE IT BEEN USED MAYBE ONCE OR TWICE! THIS KIT HAS: ONE BLACK TOWER, FAUCET HEAD.DOUBLE GAUGE CO2 REGULATOR, US SANKEY KEG COUPLER(BLACK HANDLE) BEER LINE,DRIP TRAY, TAP, BOTTLE HOLDER AND A CHROME SAFETY RAIL NO CO2 BOTTLE! THIS HAS NOT BEEN TESTED. BUT IT LOOKS LIKE IT HAS BEEN USED, WHAT YOU SEE IS WHAT YOU GET! SEE PICS AND ASK QUESTIONS EARLY! ebay 8002 This kegerator kit is made for smaller. Shorter fridges. Instead of running the faucet and shank through the door of the fridge, we replace it with a single tap tower. The tower can be mounted on top of the fridge. This kit can also be used another way, the tower can be mounted on top of your bar. The beer line would ... morerun from the tower to your refrigerator. The shorter the run the better. Your refrigerator should be set directly underneath the bar where the tower is mounted. Beer line in the tower must receive cold air from the refrigerator.
|
|
|
The thermostat sensor is missing. I took photos with the cover off also. Unit was working before being put away in storage. Will refund if doa Good Luck Bidding! Kbbox.
|
|
|
COLD PLATE- 7 CIRCUIT Save over $65 off new/wholesale. Good cold plate for either 7 products or jumper circuits together for maximum cooling. Comes with 1/4" barbed fittings. 3"h. 14"l, 8"w. 29Lbs. Units are USED. But in good, ready to use condition. Used in soda gun setup. Great for beer setup as well. Sold as is. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-14809c13132-0x111-
|
|
|
HERES A USED SOLID ALUMINUM TURBO TAP BEER CHILLER PLATE BLOCK STILL IN GOOD SHAPE
|
|
|
HERES A USED ALUMINUM COORS LIGHT SUPER COLD DRAFT BEER CHILLER PLATE MOUNTAIN BLOCK IN GOOD SHAPE 0fe.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d70f%2B%3E0fe-1483455a2f1-0x10e-
|
|
|
4 Faucet Draft Beer Keg Tap Tower Dispenser With Handles.
|
|
|
This is a Stella Artois clamp on bar beer dispensing tower. It clamps to the bar. It lights up, has its own drip tray,and dispenses beer. It is about 28" tall. A good looking piece for your bar. It is used but in great shape. Will ship USPS or Fed X which ever is cheaper and will be securely packed. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bfg2%3E-1484e203726-0x108-
|
|
|
Commercial grade Heineken draft beer tower and tap. Great for any home bar or restaurant set up. Solid piece well crafted
|
|
Reuse. Recycle, Repurpose. Double Keg Two Beer Coil Jockey Box Coleman Xtreme Cooler Football season is here and it's time for tailgate parties! Untested item. Right pull/tap seems locked up. Not sure if it needs to be cleaned out only or if the pull needs to be replaced. Nice clean piece and no damage is apparent, Stainless steel tubing No shipping. Local pickup only for this item. R1 FL sc Have any questions/need more pictures? Contact us! Please see all photos as part of the description and to determine the condition. You'll receive everything displayed in the photos. We have no other accessories. Parts, pieces, etc. to accompany this item unless noted. All of our packages are packaged in durable. Recyclable. Shipping materials. Eco Relics was established early in 2014 by Michael& ... moreAnn Murphy. We built a company that prides itself on keeping usable construction supplies out of landfills and saving as many architectural remnants as possible. This business is passionate about investing in the community by salvaging building materials from diverse sources and selling them to their patrons at a fraction of the retail cost. In keeping with the company’s mission of reusing and re-purposing they purchased an old freight depot to house Eco Relics. Reduce. Reuse, Repurpose We are devoted to preserving historical architectural building materials. We are dedicated to keeping architectural salvage and building materials out of our landfills. We are always looking for opportunities to reclaim and salvage building materials that would otherwise be sent to dumpsters and trucked to landfills. We want to discount building materials to renovate older homes with historical accuracy. Eco Relics is committed to reducing waste. Repurposing supplies, and providing reclaimed building materials at a reasonable cost. We want to provide a place where people that share our commitment to the environment and can reuse and repurpose what we salvage and sell us their unneeded items. We will ship your item safely& securely with
|
|
|
Used Luxfer 5lb CO2 tank. Comes with hose pictured. Good used condition. I offer a 14 day money back guarantee!
|
|
|
Guinness keg coupler/slider/sankey. In good working condition. Does not include screw on nipples for beer outtake hose or gas intake hose. These can be bought cheep from micromatic or kegworks. New with nipples is around $75. Posted with
|
|
|
This a used 1 passage cold plate that has been cleaned. Flushed and all water cleared out. It is in great working condition. This is part of a beverage dispensing system and can be used for fast chilling of water, soda, beer, wine or any of your favorite beverages. When you connect it to a bar gun or tap all you need to do is place it in ice to chill your beverages. It is 12 inches long by 8 inches wide and is 1 inch thick. It comes with 1/4 inch stainless fittings. No reserve price and Free shipping in the lower 48 states!
|
|
|
Clean cylinder. di,RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishhov%3C%3Edi-1486cda124f-0x10e-
|
|
|
Vintage 1970's cream coat. Purchased by my mother in the 70's this coat has only ever had one owner and is in great condition. Has a comfy relaxed fit. Looks almost new except for some pilling. Full zip front with button cover overlay. 65% Polyester 35% Cotton Shoulder: 14 Sleeve: 24 Bust: 24 Waist: 21 Hips: Length: 31 Tag Size: M Brand: This item is posted and managed courtesy of Bonanza.com
|
|
|
This is a 6 product glycol. Long draw dispensing beer tower. It is about 14" tall, 18" wide,5" deep and has a 5 1/4" base. A good looking piece for your bar. It is used but in great shape. Will ship USPS or Fed X which ever is cheaper and will be securely packed.
|
|
|
USED EMPTY 20 LB. Co2 ALUMINUM CYLINDER TANK WITH BRASS VALVE AND PROTECTIVE CARRY HANDLE FOR BEVERAGE. WELDING, HYDROPONICS. TANK AND VALVE ARE IN GOOD FUNCTIONING CONDITION. CHECK SHIPPING DETAILS TO CHOOSE THE BEST OPTION FOR YOUR LOCATION. Check out my! Be sure to add me to your!
|
|
|
This is a used 4 passage cold plate that has been cleaned. Flushed and all water cleared out. It is in great working condition.This is part of a beverage dispensing system and can be used for fast chilling of water, soda, beer, wine or any of your favorite beverages. When you connect it to a bar gun or tap all you need to do is place it in ice to chill your beverages. It is 14 inches long by 8 inches wide and is 2 inches thick and weighs 23 pounds! It comes with 1/4 inch stainless fittings. No reserve price and Free shipping in the lower 48 states!
|
|
|
Here are the tools you would need to do this job: vice. Vice grips, drill press, drill bits, epoxy, various sized metal tubes, tap, connector, cups, tooth picks. 7 days of waiting, 2 hours of working, 1 hour of cleanup. You can save the hassle and buy it from me for $39.95 and I'll handle and ship it for free. Each converter is quality tested with soapy water for leaks and arrives washed and no-rinse sanitized. Just bore out the plastic a bit, I'm sure a finger file would work, and you'll save $$$100s on CO2.
|
|
YOU ARE LOOKING AT A MICRO MATIC BEER KEG/DRAFT BEER TAPS/COUPLERS SPECS ARE AS FOLLOW: STAINLESS STEEL SK 184.03. KEG D SYSTEM COUPLER TAP. AS PICTURED HAS GUNIESS/HARP LAGER BEER PAINTED ON HANDLE. UNITS ARE USED BUT IN VERY GOOD COSMETIC AND WORKING CONDITION. GREAT DEAL. CATCH IT FAST! PLEASE READ AHEAD FOR ADVISEMENT AND CONSENT BEFORE PURCHASE OR BID: COMPANY: WE ARE A SURPLUS/LIQUIDATION SELLER. WE LIST AND DESCRIBE TO THE BEST OF OUR ABILITY AND KNOWLEDGE. IF YOU HAVE A QUESTION DO NOT HESITATE TO ASK WE WILL GIVE YOU THE BEST ANSWER POSSIBLE. WE ARE A BUSINESS AND ONLY OPERATE MONDAY THRU FRIDAY, PLEASE WAIT FOR A BUSINESS DAY FOR COMMUNICATION AND RESPONSE TO ANY MESSAGES OR CONCERNS ITEM CONTENTS: ONLY WHAT IS PICTURED AND DESCRIBED IS INCLUDED. IF IT IS NOT PICTURED OR LISTED IN ... moreDESCRIPTION IT IS NOT INCLUDED. TERMS: ALL ITEMS NEED TO BE PAID FOR WITHIN 72 HRS. OF AUCTIONS END/ BUY IT NOW. IF REQUIREMENTS ARE NOT MET YOU FORE-FIT YOUR RIGHT TO THE ITEM. AFTER DEADLINE POINT WE HAVE THE RIGHT TO REFUSE SALE AND CANCEL THE TRANSACTION AT ANY GIVEN TIME. PACKAGING: WE USE NEW AND USED PACKING MATERIAL(DEPENDING ON WHAT’S AT HAND AT THE MOMENT) TO SHIP OUT ANY AND ALL ITEMS. WE USE ANY MATERIALS FROM BUBBLE WRAP. NEWSPAPER, PACKING PEANUTS, TO PAPER. WE DO THIS TO RECYCLE MATERIAL AND BE ABLE TO HAVE COMPETITIVE PRICES. PLEASE BE ASSURED ANY USED MATERIAL WE USE WILL ENSURE PROPER PACKAGING AND IN NO WAY WILL WE EVER SHIP OUT YOUR ITEM IN AN UNSAFE MANNER. SHIPPING: WE ONLY SHIP TO THE CONTINENTAL/CONTIGUOUS 48 STATES. ALL ITEMS ARE SHIPPED WITHIN 48 HOURS OF PAYMENT CLEARING. INSURANCE COVERAGE IS ONLY INCLUDED IN SALES TOTALING $99.99 AND UP. TRACKING NUMBERS ARE PROVIDED ON REQUEST AND VIA PAYPAL. RETURNS/REFUNDS: FIRST AND FOREMOST YOU MUST CONTACT US( 720-212-8328 OR 303-718-7834) AND STATE YOUR CONCERN BEFORE MAKING A RETURN. RETURNS MUST BE MADE AWARE OF AND ARE ACCEPTED WITHIN 14-DAYS OF ITEM BEING DELIVERED. ITEM/S MUST BE SHIPPED BACK WITH THE ORIGINAL CARRIER UNDER THE SAME DELIVERY METH
|
|
|
Pictures say at all. Get started today with everything you need to convert your fridge into a beer dispensing place of happiness. Connections for both European and domestic beers in the us. 20 tap handles including leinies red. Oberon, and ear, blue moon( repaired) Also included is some extra parts like a pump to clean out your line and cleaning agent to keep it fresh and clean. There are extra o rings and rubber washer. Plus a uni seal so you can run your drain back into a storage container within the fridge. All you need is PVC, rubber hose, and a storage tank. Posted with
|
|
You are bidding on one(1) previously owned Wunder Bar Oil dispenser cart on casters. NSF. Model WB-ODW-1-1-PC4. Serial number 12202-004, 115volts, 1 phase. Overall dimensions are approximately 27 1/2"x24 1/2"x36"ht) Unit is used and has normal wear of used equipment.surface scratches, dings, dents and will required some extra cleaning. Inventory number: R94015. For more information on this manufacturer please visit: ABC Restaurant Equipment 5201 Grisham Drive Rowlett. Texas 75088(214) 607-4424 Open Monday-Friday from 8am-5pm CST Buyer can pick up from our warehouse in Rowlett. TX(Dallas area) or make shipping arrangements through freightquote.com or the freight carrier of your choice. Please contact Freightquote.com for a free shipping quote at 1-800-323-5441 EXT. 1496 attention ... moreRoy Spencer or email him. Buyer pays all shipping costs plus $35.00 for packaging and handling. Shipping weight is approximately 185 lbs. Pallet dimensions are approximately 4'x4'x4'ht) Due to the high level of non-paying Ebayer with no feedback. We reserve the right to cancel any bid at any time from Ebayer with no feedback. Ebayer with no feedback must contact us before bidding or bid will be cancel with out notice. Feel free to check out our feedback and buy with confidence. Please e-mail with questions before bidding. Check our other auctions for more great deals. Good Luck and Happy bidding!
|
|
|
This is a lot of 4 Draft Keg Taps. I don't know the working condition of these. The knobs do turn and the lever(on the Micro matic) do work but I have no idea if the seals are any good. Only one is identified with a manufacturer name(the Micro Matic) The others just say"Do Not Exceed 50 PSI" Being Sold AS IS I'll try to answer any questions that I can.
|
|
|
This a used LARGE 1 passage cold plate that has been cleaned. Flushed and all water cleared out. It is in great working condition. This is part of a beverage dispensing system and can be used for fast chilling of water, soda, beer, wine or any of your favorite beverages. When you connect it to a bar gun or tap all you need to do is place it in ice to chill your beverages. It is 14 1/2 inches long by 9 1/2 inches wide and is 1 inch thick. It comes with 1/4 inch stainless fittings. No reserve price.
|
|
|