|
|
Order by: |
Buy It Now
$800.00 Shipping
Condition: New Location: , China
It is use in restaurant, dinning room and food factory for making dumplings. It also can make fried dumplings, egg roll, samosa, wonton and other foods by changing different forming parts. The dumpling size: 58 30mm.
0 bids Free Shipping
Condition: Used Location: Naugatuck, United States
Older Robot Coupe R2. Still operates, the broken piece is still inside the housing.
0 bids Free Shipping
Condition: Used Location: Brooklyn, United States
0 bids Free Shipping
Condition: New Location: Cranbury, United States
Vegetables (cabbage, cabbage, lettuce, spinach, fennel, eggplant, rape, etc.). Long fiber vegetables (leeks, shallot, asparagus, celery, bamboo shoots, green onions, beans, spinach, etc.). Power: 600W.
0 bids $40.00 Shipping
Condition: New Location: Miami, United States
Manufacturer: Winco. Fits on any 7 or larger receptacle. Cutting plates have perforations of (1-/16", 3/32", 5/32"). Stainless steel. Puts out 3 lbs per minute.
Buy It Now
Free Shipping
Condition: Used Location: Dyersburg, United States
This Shredder is used. It has two sets of numbers or identifying numbers letters on the top side it has E3, and the bottom side it has a number that is etched in the middle C446S. The shaft has a measurement of 0.81 in across. I really do not know which Dito Electrolux vegetable slicer this goes with. The blade measures 7 1/2 in across on the top side. Please look at all of the photos as they are very important part of the description. I I have quite a few blades available and they are all used. Please message me if you have any questions and thank you so very much for looking at my vegetable shredding blade.
Buy It Now
Free Shipping
Condition: Used Location: Dyersburg, United States
This unit has a serrated blade and is used. It has two sets of numbers or identifying numbers letters on the top side it has E10, and the bottom side it has a number that is etched in the middle C435S.
0 bids $5.00 Shipping
Condition: New – Open box Location: Southbridge, United States
Part# 2-40RX-SFYS-10#.
Buy It Now
Free Shipping
Condition: Used Location: Dyersburg, United States
This double blade slicer is used. Model number is TR 21 1402. I really do not know which Dito Electrolux vegetable slicer this goes with. THE BLADES NEED REPLACING. I have quite a few blades available and they are all used.
Buy It Now
Free Shipping
Condition: Used Location: Bend, United States
LOT OF 4 Waring WFP14S 3.5 Qt. Food Processor Discs WFP14S10, 11, 12, & WFP143.
0 bids Free Shipping
Condition: Used Location: Castalia, United States
SALSA SCREEN~ EXTRA COARSE. VICTORIO STRAINER ACCESSORY. This item is pre-owned and will have visual and physical cues typical of an item that has been handled and used.
0 bids $42.81 Shipping
Condition: Used Location: Senatobia, United States
Up for sale is a heavily used Robot Coupe R4X Food Processor with extras. It's been well used/rough but it appears to be working see video. You can see the broken off plastic pieces on feeder. See all pics. Once again it's in heavily used/ rough condition
Buy It Now
Free Shipping
Condition: Used Location: Dyersburg, United States
This double blade slicer is used. Model number is TR 21 1303. I really do not know which Dito Electrolux vegetable slicer this goes with. THE BLADES NEED REPLACING. I have quite a few blades available and they are all used.
0 bids Free Shipping
Condition: Used Location: Littleton, United States
• Cashew Butter. Olde Style Fresh Nut Butter. • Peanut Butter. • Almond Butter. • Organic Butter. • Honey Butter.
Buy It Now
Free Shipping
Condition: New Location: Perth Amboy, United States
The Pro Classic™ boasts an extra-large feed tube to handle whole fruits and vegetables, a slicing disc, a shredding disc, and a chopping/mixing blade to tackle all your prep work with ease. 7 cup work bowl.
0 bids Free Shipping
Condition: New – Open box Location: Spokane, United States
With a capacity of 4QT, this food processor can handle large amounts of ingredients with ease.
0 bids Free Shipping
Condition: New Location: Kansas City, United States
New box of 25. Se Habla Español.
0 bids $7.95 Shipping
Condition: Used Location: Columbus, United States
Waring Commercial BFP13 5/32” (4mm) slicing Disc for FP25, FP25C, & FP1000 Food Processors. Blade is 6-1/4” in diameter.
0 bids Free Shipping
Condition: New – Open box Location: Warrenville, United States
INDUCTION COOKTOP: The Vollrath Mirage Pro can be used only with induction ready cookware - ferrous stainless steel, iron and cast iron.
Buy It Now
Free Shipping
Condition: New Location: Chicago, United States
Robot Coupe Foot 101082.
Buy It Now
$200.00 Shipping
Condition: Used Location: Naperville, United States
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Used, very good condition as shown in pictures.
Buy It Now
Free Shipping
Condition: New – Open box Location: Ashland, United States
7/32 Slicer Blade and food slinger included. The compact design has a small footprint while still processing 11 lbs. of produce per minute. Get precise cutting and dicing action without bruising your vegetables.
Buy It Now
Free Shipping
Condition: New Location: Saint Cloud, United States
MANITOWOC ICE MACHINE SERIES: Q, EXCEPT Q130,Q210, Q270. ICE THICKNESS PROBE, 4" 3-1/4" OVVERALL.
Buy It Now
Free Shipping
Condition: New Location: Lathrop, United States
Robot Coupe 59280 Details.
0 bids Free Shipping
Condition: Used Location: Doylestown, United States
Get this workhorse for a fraction of the price.
0 bids Free Shipping
Condition: Used Location: Schertz, United States
This is in excellent used condition. Pulled from a Brunner Quattro. 180mm or about 7". We can resolve most any problem easily.
0 bids $25.00 Shipping
Condition: New Location: , PT
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
We stand behind our products.
0 bids Free Shipping
Condition: New Location: Hayward, United States
The tilting tub makes adding and removing mixtures from this unit simple, as you can shovel the contents into a nearby container. The unit can also be surface-mounted for even more stability.
0 bids $120.00 Shipping
Condition: New Location: , China
Power: 220W. vegetables (cabbage, cabbage, lettuce, spinach, fennel, eggplant, rape, etc.). Long fiber vegetables (leeks, shallot, asparagus, celery, bamboo shoots, green onions, beans, spinach, etc.).
0 bids Free Shipping
Condition: New Location: Cranbury, United States
For vegetables (cabbage, cabbage, lettuce, spinach, fennel, eggplant, rape, etc.). 【Efficient, Durable and Powerful】Food-grade stainless steel ensures the durability of the food processor. Strong and sharp steel blade for fast food processing and increased efficiency.
0 bids $99.99 Shipping
Condition: New Location: , China
Power: 220W. vegetables (cabbage, cabbage, lettuce, spinach, fennel, eggplant, rape, etc.). Long fiber vegetables (leeks, shallot, asparagus, celery, bamboo shoots, green onions, beans, spinach, etc.).
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
& Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
0 bids Free Shipping
Condition: Used Location: Leander, United States
Model: WFP14. Manufacturer: Waring (by Cuisinart). The Batch Bowl, Cover with Shoot, Plunger, and Serrated S Blade are included. Notes:This food processor was removed from a working lab. We powered it on and observed the motor and blade turning smoothly as designed during both ON and PULSE mode.
0 bids Free Shipping
Condition: New Location: , China
Vegetables (cabbage, cabbage, lettuce, spinach, fennel, eggplant, rape, etc.). Long fiber vegetables (leeks, shallot, asparagus, celery, bamboo shoots, green onions, beans, spinach, etc.). Stainless steel + food grade ABS material.
0 bids Free Shipping
Condition: New – Open box Location: Warrenville, United States
On-off and pulse switches. stainless steel bowl and see-thru lid. Direct drive motor, fan-cooled.
Buy It Now
Free Shipping
Condition: New Location: Ashland, United States
Hobart Part # 00-274312. Dishwasher safe.
0 bids Free Shipping
Condition: Used Location: Rancho Cucamonga, United States
Power: 750W(1HP). Fruit and Vegetable Slicing/Shredding/Dicing Cutter Machine. Vegetable cutter 1 Dicing knife 1 Cutter mounting wrench 1. Cutter material: Aluminium magnesium alloy. - Easy to replace the cutter, simple operation, high efficiency.
0 bids Free Shipping
Condition: New Location: Chino, United States
This machine is a wet grinding machine can grind soybeans. It is especially suitable for grinding soaked soybeans and rice into pulp. Rice Corn Copper/Aluminum Wire. TypeBean Grinder. 1 x Grinding Machine.
0 bids $200.00 Shipping
Condition: New Location: , China
0 bids $9.00 Shipping
Condition: Used Location: Schertz, United States
We can resolve most any problem easily.
Buy It Now
Free Shipping
Condition: Used Location: Paradise, United States
Food Processor Motor Base. Works great.
0 bids Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Can make smoothies drink. Durable carbon steel blade, full-stainless steel material. ▲ 6 months' warranty for the machines, not for the consumables. Hope for your understanding.
0 bids $19.00 Shipping
Condition: Used Location: San Antonio, United States
This front hopper assembly is specifically designed for use with the OLDE TYME PN2 nut butter grinder. It is a genuine Hampton Farms product, made of high-quality materials that ensure durability and longevity. The hopper is an essential component of the grinder, allowing for efficient processing of nuts and other ingredients. Also with cover and screw parts
Buy It Now
Free Shipping
Condition: Used Location: New Orleans, United States
Buy It Now
Free Shipping
Condition: Used Location: Grand Saline, United States
The FP100 is a used item, but it has been well-maintained and is in excellent working condition. It has a 1-speed motor that can handle even the toughest jobs in the kitchen. The compact unit is designed for ease of operation and quick cleaning.
Buy It Now
Free Shipping
Condition: New Location: , United States
Model # 27263 ". Use with Robot Coupe R2 and R2 Dice Ultra. Standard Features.
Buy It Now
Free Shipping
Condition: Used Location: Christiansburg, United States
Hobart 84186 15 lb. 1HP Buffalo Chopper Food Processor Cutter 208V 3-Phase. We tested the processor by connecting it to a 208VAC three-phase line and powering it on The machine will not start with the cover open.
0 bids $5.00 Shipping
Condition: New Location: Southbridge, United States
0 bids $16.36 Shipping
Condition: Used Location: Albuquerque, United States
This Robot Coupe RC-2800 food processor whole bowl feeder system G0-28 is a must-have for any kitchen. Made in France, this whole bowl feeder system is designed to fit seamlessly with your RC-2800 model and features a durable construction that can withstand the demands of a busy kitchen.
Buy It Now
$49.95 Shipping
Condition: Used Location: Brooklyn, United States
Comes as pictured. works fine
0 bids Free Shipping
Condition: Used Location: Marshalltown, United States
Up for sale is a large vegetable pusher for Robot Coupe commercial food processors. This pusher has a 6-inch diameter and is designed to fit various models of the brand. Please note that the top handle of the pusher is chipped, but this does not affect its ability to be used effectively. The pusher comes with a bundle that includes a large vegetable pusher, making it a perfect addition for any food preparation equipment. This unit type is ideal for use in restaurants and food service businesses. Don't miss out on this opportunity to enhance your commercial kitchen equipment with this versatile pusher.
0 bids Free Shipping
Condition: New – Open box Location: Fredericksburg, United States
Robot coupe R 301 This unit has all complete attachments , small scratch was noticed on the gray bowl ( pic 18 ).Please see all pics for all attachments included .Discs included :Slicer 4Grater 2Fine grater S blade Free shipping with signature required please .
0 bids $9.00 Shipping
Condition: Used Location: Schertz, United States
This is in great pre-owned condition. Includes set screws.
Buy It Now
Free Shipping
Condition: Used Location: Mount Vernon, United States
Then this Dicing Grid 1/4" Disc Plate is exactly what you have been looking for. There are scratches on one side and has a stain on the other. The Dicing Grid is 1/4" in size. (#OC3-00- CCAB-1948 ) RL2 PR24 HC.
0 bids $5.30 Shipping
Condition: New Location: San Antonio, United States
Buy It Now
$5.00 Shipping
Condition: New Location: , United States
Cantex 5133696 Service Entrance Cap, Pvc, 12-25/32 In. L, Overall Length: 15 In. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose.
Buy It Now
$6.00 Shipping
Condition: New Location: Farmington, United States
Brunner Anliker Coarse cut (G6) replacement blade 232.01809 NEW. 102121-510
0 bids $34.95 Shipping
Condition: For parts or not working Location: Seattle, United States
Everything in the photos is what you will be receiving, If not, will not be included.
0 bids Free Shipping
Condition: Used Location: San Dimas, United States
|
|
|
The Olde Tyme grinder is a commercial duty mill. It's perfectly suited to specialty food stores. Either as a self-serve machine or behind the counter. Now with an even stronger 1 HP high torque motor and NSF certification, the Olde Tyme is ready to tackle your most demanding needs. The Olde Tyme nut grinder produces 2.5 lbs. of nut butter per minute. The switch on the face of the motor cabinet turns the machine on. And nut butter is dispensed from the bottom of the milling head. This mill has a heavy duty TEFC motor. TEFC" means"Totally Enclosed Fan Cooled" And the fan referred to is an integral part of the motor itself. Olde Tyme grinders have a 100% duty cycle, meaning that they will not overheat under steady use. Nut butter output generally runs about 100-110° F. ... moreThis mill is rated for 110 volt/20 amp and is UL Listed and NSF certified. The 110V model includes power cord with standard 3 pole grounded plug end. Height to top of upper chute is 22.75" Width of motor enclosure is 11.5" Depth from front of hopper to back of motor enclosure is 21" Depth of motor enclosure alone is 14.4" Height of motor enclosure alone is 11.9" Width of hopper lid is 11.1" The Olde Tyme grinder's hopper holds approximately 20 lbs. of peanuts. Disassembly and cleanup of the Olde Tyme nut mill is very easy. With full accessibility requiring no tools. Products Ground: The Olde Tyme will grind peanuts. Honey roasted peanuts, almonds, pecans, macadamia nuts, hazelnuts, pistachios, cacao beans and cashews in either roasted or blanched state, for a spreadable butter containing fine-textured particles. Raw nuts of the same types can also be ground, but texture will vary between types when ground raw. Nuts used must be the size of"butter stock" or smaller. All nuts must be"butter stock" size. Or smaller. Butter stock nuts are sized to feed into the mill properly; they're smaller and contain more split pieces than"fancier" grades—and they cost less. Pro
|
|
BERKEL TM-100 Food Processor Slicer Grater Chopper NO RESERVE AT THE END. This auction is for a used BERKEL TM-100 Food Processor. The unit is in excellent condition. The machine is very powerful and the motor sounds strong. Everything works as it should.This is a nice clean restaurant grade food processor. I do not have any cutting discs for it.You will have to purchase a disc(you probably can find some on Ebay) A super machine for that new restaurant on a budget or to have a backup. Sold with no reserve. Please email with any questions. GOOD LUCK! Paypal is accepted and preferred. Payment is expected within 48 hours of purchase. Items are shipped USPS. Unless weight or size exceed shipping requirements. Fed Ex is used for larger items. Delivery confirmation is required. Add To Favorites ... moreMy Auctions Feedback Template and Photo By Olde*Blue*Barn*Primitives Copyright © 2008. 2009
|
|
|
Used. Works great Posted with Posted with
|
|
You are bidding on used working condition HD LOT OF 8 COMMERCIAL 9" SERVING PLASTIC TONGS SALAD/BUFFET/SUNDRY MERCHANDISE THESE TONGS ARE PERFECT FOR SALAD BAR. BUFFET TABLES OR OTHER SUNDRY MERCHANDISE As seen in pic. Selling as is. PEOPLE OF AK,PR,HI MUST PAY DIFFERENT SHIPPING COST ID# 16-0028M LO# UP 7 We ship to your paypal shipping address or make sure you individually email for different shipping address. Why pay $ more for brand new one? Here is used condition with the cheaper price. Please call 616-638-2465 for more information and faster service. Also click this link to save big $$$$$ for restaurant equipments. Indoor, outdoor lightings, household goods, tools and more. For our store inventory. Please visit our pro store Bargainsfoodequipment.COMe and save money here. Thank ... moreyou very much for visiting our store. Bargains-R-Ours offers the following Policy: PAYMENT OF ITEMS We accept PayPal and other payment methods. Payment must be completed within 5 days of sale end We will send you final notice if we don't receive the payment 7 days after of the sale and report to eBay team to dispute your account then re list it If you are not so sure to pay. Please don't waste your or our time. You agree to pay 15% restock fee if you don't pay after you purchasing whether you or someone make mistake or have no funds available. If you live in Michigan we have to charge a sales tax of 6.00% SHIPPING AND CLAIMS Please check all items for damage before accepting them from shipper We ship any where in US and Canada. For Canada. We need your broker's name and number for custom purpose. If you don't have one, we can tell you where you can have one. We also ship other countries as long as you arrange your own carrier from a USA port to your country We have loading dock and forklift for local pick up Used equipment will be shipped as described Please allow up to 2 days after payment has been received for item to be shipped The buyer is responsible for filing claims with the shipping service. We will g
|
|
PL Z DON'T BID IF YOU DON'T WANT TO PAY AFTER YOU WIN. You are bidding on A USED CONDITION HD COMMERCIAL LOT OF 3 KITCHEN ASSORTED GRADE STAINLESS STEEL FRYING SKIMMER AND STRAINER TWO SKIMMER ARE OF THIS SIZES: APPX# 17" LENGTH x 6 1/2" DIAMETER(OVERALL) ONE STRAINER IS OF THIS SIZE: APPX# 23" LENGTH x 10" DIAMETER x 4 1/2" DEEP WE REMOVED THIS ITEM FROM CLOSING DOWN BUSINESS. IT MAY NEED TO BE CLEAN MORE. THERE ARE SOME MINOR IMPERFECTIONS ON THIS ITEM FROM USE. As seen in pic. Selling as is. ALL SHIPMENTS THAT MAY BE SHIPPED TO ALASKA. HAWAII, OR PUERTO RICO, MUST PAY ACTUAL SHIPPING COSTS. ID#16-0140 M LOC.UP1 Welcome to Bargainsfoodequipment where you can get the restaurant. Food service equipment at cheap price. We have 35000 sq ft ware house located ... morein Battle Creek, Michigan. We are one of the biggest used restaurant equipment reseller in South west Michigan specializing in Restaurant, Bakery, Pizza, Ice cream and Grocery Deli Supermarket equipment. We work closely with repo company and bank so we are able to get the equipment at low prices which we are able to pass on to you. Why buy new? Save BIG $$$$ here. Thank you for visiting our store and May you all have The Happy Life. We ship to your paypal shipping address or make sure you individually email for different shipping address. Why pay $ more for brand new one? Here is used condition with the cheaper price. Please call 616-638-2465 for more information and faster service. Also click this link to save big $$$$$ for restaurant equipments. Indoor, outdoor lightings, household goods, tools and more. For our store inventory. Please visit our pro store Bargainsfoodequipment.COM e and save money here. Thank you very much for visiting our store. Bargains-R-Ours offers the following Policy: PAYMENT OF ITEMS We accept PayPal and other payment methods. Payment must be completed within 5 days of sale end We will send you final notice if we don't receive the payment 7 days after of the sale and report to eBay team to dispute y
|
|
Robot Coupe RC 3500/3600 Food Processors Discs Stem Prologator Attachments This sale is for Robot Coupe RC 3500& RC 3600 Food Processors attachments. GO-350 Made in France These attachments includes everything shown in the photos. Schredding disc Slicing disc Carrier ring Stem prologator PayPal Preferred. Please pay with your credit card through Paypal. You will receive an invoice via email with checkout instructions when the auction closes. If payment is not received within 4 days of purchase. An unpaid item case will be opened. Buy it now items require immediate payment. Shipping is through USPS and the cost is calculated. We charge a handling fee ranging from $.50- $3.00 depending on the item being shipped. We pack all items with proper packing materials so they will arrive to you safely. ... moreWe ship 6 days a week. Monday through Saturday. Local pickup can be arranged if you choose. Certain items such as home audio systems are shipped through UPS Ground or. If preferred, FedEx Home. The cost for shipping through UPS is calculated as well and should readily show in the shipping and payment tab. Since FedEx does not offer calculated shipping at this time. You should request for a shipping estimate from us before bidding on an item. International Buyers- Please Note: Import duties. Taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. All items SOLD AS-IS. Unless stated in the item description. Returns are accepted. We accept returns only if the item was significantly not as described in the auction. Buyer must notify us via email within 48 hours and return the item within 3 days. Buyer is responsible for return shipping charges. We do our best to give accurate information about each item we sell. If you have any questions. Please email us BEFORE placing your bid or buying an item. Welcome to Bric-à-Brac& Beyon
|
|
|
THIS BLADE IS IN GREAT CONDITION. NO CHIPS OR DINGS, NOT SURE IF IT WAS EVER USED.
|
|
|
Tech Life. A division of Life Span Technology Recycling We specialize in asset recovery and remarketing of laptops. Personal computers, servers, LCD monitors and other IT related equipment. ROBOT COUPE R2NCLR R2 COMMERCIAL FOOD PROCESSOR Manufacturer ROBOT COUPE, Model. R2NCLR, WAS USED COMMERCIALLY FOR 6 MONTHS ONLY! Warranty: QUALITY TESTED/ FULLY FUNCTIONAL. 30 DAY WARRANTY. Condition: VERY GOOD OVERALL CONDITION EXPECT MINOR WEAR(SEE PHOTOS) What's included: 1) ROBOT COUPE R2NCLR R2 COMMERCIAL FOOD PROCESSOR Photo Gallery: Please note: 15% restocking fee applies to all returns due to incompatibility or return of functioning items. Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
Hello! I’m proud to be involved with L&L Restaurant Equipment here in Nashville. TN. Their 49 years in the business and almost 60,000 square feet of new and used restaurant equipment is amazing to say the least. As their online auction agent, it’s my pleasure to help serve as a bridge between their huge and sometimes hard-to-find inventory and the needs of others who need a great deal on commercial and residential equipment and just can’t find anywhere else. ====================================================================================================================================================================================================================== HOBART UMP-4D DISHWASHER ====================================================================================================================================================================================================================== ... moreTerms and Conditions* The seller is L&L Restaurant Equipment. A winning bid on E Bay represents a purchase agreement with L&L Restaurant Equipment* L&L Restaurant Equipment strives to create a positive experience for all our customers and welcomes your suggestions. We value our reputation and hope you will give us the opportunity to proactively address any concerns you may have. Please do not hesitate to call us at 615-576-0331 with any questions. We reserve the right to modify these terms from time to time. It is the buyer's responsibility to review all terms and conditions before purchasing. The buyer is responsible for obtaining all information necessary to make an educated decision regarding the purchase. The buyer accepts responsibility for checking applicable state and local codes and for ensuring items meet those codes before purchasing. The buyer will not hold L&L Restaurant Equipment responsible for anything not stated in the listing or included in the picture. Including, but not limited to, assumptions made by the buyer or any verbal statements. EBAY PURCHASES* For any items sold
|
|
Very Good Condition! Commercial Mannhart Hobart Food Processor Dicing Blade Model: D-11 Mannhart Dicer Grid For M2000#DICE-D11 Excellent Condition! 3/8" Holes Dicing Grid. 3/8" 11mm) use with SLICER-S11 slicer for dicing, or SLICER-J4X4 or SLICER-J6X6 julienne slicer for brunoise style onions& celery, for M2000& M3000 vegetable cutters. NSF Approved Made in USA Heavy duty Restaurant quality! Only includes what is in picture no extra attachments. THANK YOU for bidding! Works great- g uaranteed! FEEDBACK: Our goal is total customer satisfaction! We always give feedback after we know you are satisfied. We do our best to give you 5 Star service! If you feel you have received less than 5 Star service. Please let us know before leaving feedback so we can try to make it right. SHIPPING: ... moreWe love to work with you on discounts for multiple purchases-please contact us and we'll give you more information! We try to ship within 1 business day or sooner after payment is received. Heavy. Bulky or fragile items may take slightly longer to give them TLC packaging. Buyer is responsible for any customs fees. RETURNS: Returns are accepted within 14 days. But you must contact us first. In the rare event that something would need to be returned, buyer is responsible for return postage unless we determine it is our mistake. Merchandise MUST be returned in the same condition it was received. There is a 15% restocking fee unless return is due to our mistake. If you have any questions or we can be of assistance please contact us. Check out my other items! Browse our REMODEL and MORE for more restaurant supplies! Powered by The free listing tool. List your items fast and easy and manage your active items.
|
|
|
THIS CL50 DOES RUN. BUT MAY NEED A GOOD OILING. DOES NOT COME WITH ALL BLADES, ONLY WHAT YOU SEE IN THE PICTURES. I HAVE TWO OF THESE. THEY ARE IN NYC AND CAN BE PICKED UP OR SHIPPED.THIS AUCTION IS ONLY FOR ONE UNIT. 560.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E560-13ec77d70d9-0x105-
|
|
|
Robot Coupe R6N Commercial Countertop Food Processor Used Description: Came out of a working environment. These retail for a LOT more than we have this listed for. Comes with 1 blade. Ships within 48 business after after payment has been received. Shipping- UPS Ground: $40.00
|
|
|
Globe GFP500 Food Processor Vegetable Slicer Cutter 1/2 HP Used Description: Came out of a working environment. Runs on a standard 110v outlet- These are extremely pricey if bought new. Does not come with the food pusher or blade. Which both can be purchased on eBay very cheap! Standard Features 1/2 HP gear driven motor, Plate speed of 340 RPMs, Thermal overload protection, Polished cast aluminum construction, Interlocked hopper head and food pusher, Ergonomic 45° food hopper incline, Discs are rigid cast aluminum, Stainless steel knives are hardened. Ground, and hand polished, Shipping- UPS Ground: $40.00
|
|
|
This is a used Robot Coupe R4 Food Processor. This item is in decent condition and runs nice and quiet. This comes with the continous feed attachment. One metal bowl and one blade. This unit requires 208-240 volt, 3 phase power and has a 1 HP motor and two speeds(1700/850 RPM) Watch video to see/hear it running. Contact Dave at 954-760-9333. Lauro Auctioneers. 1224 NE 7th. Ave. Fort Lauderdale. FL. 33304.
|
|
Globe Anliker Gsm 5 Star GFP550 This is a very nice and very clean low use Globe GFP550. It was only used for a short time before its previous owners shut their doors. This machine was purchased for over $4.500 new. This is a great deal for someone in the market for a low use or new unit. This unit ships FREE- It is wrapped in layers of thick packing paper and secured in premium packing foam and ready to ship in a heavy duty double walled shipping box. Extra care is taken in packing all our shipments to ensure a safe arrival. This processor is manufactured in Switzerland by Anliker. Piper Products is the current US distributer of these processors- Globe now longer handles them. Parts and accessories can be purchase from Piper Products. For a list of available cutting disc please click HERE. ... moreSpec Sheet HERE Operation Manual HERE Please watch the videos below to see some of the capabilities of this amazing machine. Posted with
|
|
|
BIDDING ON A"NEW" GLOBE CMAT6 FOODM PROCESSOR.NEW UNIT.RUNS ON 115. FOR MORE COMPLETE INFORMATION ON THIS MACHINE CALL PAT OR JOE AT 704 333-5609.Check out my!Be sure to add me to your! FREE LOCAL PICK UP WELCOME.BUYER RESPONSIBLE FOR ALL SHIPPING ARRANGEMENTS.SOLD AS IS WITH NO WARRANTY.CASH OR CERTIFIED CHECK DUE AT CLOSE OF AUCTION.
|
|
|
Electrolux Dito Dean M10 Dicing Blade Plate 10mm Fits TR21 Model Please see photos and email with any questions.
|
|
|
1 continuous feeder- 1 S Blade- 2 Disc Blades
|
|
Description. 7 Robot Coupe Discs/ Blades- 7 3/8" Dia. E series? E/S5 RG3 E/S3 J4*4 Es/10 the es/10 has a crack in the blade. The others appear to be good condition. I am selling the es10 with the lot because you might be able to replace the blade? I ran these in hot soapy water and did a quick clean on them, they will need a nice deep cleaning before being put to use. thanks for looking. As is. Shipping. $ 18 insurance is always provided with any item over $99 attention! I do all my shipping on Wednesday. And sometimes Saturday, I usually ship more than this but I am disclosing this in my auction because sometimes it works out this way, so please be fair on rating my shipping time since this is disclosed) If there is a need for your item to be promptly shipped please write me after you ... morehave won the bid and I will try to make arrangements and let me know. I ship to the lower 48 United states only! Residents in Ak. Hi, Pr, or Apo/Fpo please email first for a shipping quote! Most of my pieces are vintage(20+ years old) Condition will vary. I always take good close up pics showing any condition issues Please keep in mind that I do not claim to be an expert and that condition is based on opinion(not fact) I ALLOW FREE LOCAL PICK UP! IF YOU DECIDE TO PICK UP YOUR ITEM I WOULD PERFER CASH! DISCLAIMER all items are single quantity and will be the actual item you see pictured. Items are sold in"AS IS/ AS FOUND/ AS DESCRIBED" condition. Unless otherwise stated. I do not give warranties for items because of the age of what I sell. I do guarantee Items to not be DOA unless the item was described in need of repair ect. All auctions won must be paid for within four days.
|
|
|
DITO dean tr 22 commerical processor. barley used. comes with one single blade. in 100% working condition. for more info or local pickup 604-723-4018
|
|
From a state surplus sale. A WFP122 food processor hopper. Comes with blade and WFP123"work bowl cover" The safety interlock post works fine. Weight 2.1 lbs(Before packaging) Items ship from zip code 68512 in the U.S. Shipping costs quoted are to the continental states only. Anywhere else will be more. Payment is expected within 10 days. Otherwise I reserve the right to file for non-paying bidder,and re-list the item. SHIPPING-USPS: Please note that I am NOT responsible for the time the post office takes to deliver the package. Tracking numbers will show up in the'order details' section once I ship the item. SHIPPING-OTHER" If the shipping is'Other' then it is Fedex. Fedex does NOT ship to PO boxes. So please provide a"real" address. SHIPPING-COMBINED: ... moreI always do my best to combine multiple wins to save on shipping. I make full use of USPS flat rate boxes wherever possible. And will only charge you for one box if I can fit multiple wins in the same box. If you win more than one auction I will send you a new quote with new shipping. Also. I am happy to hold items for you if you plan on buying many items from me over time, in order to combine their shipping. This is at my discretion, for buyers with dodgy or low feedback. Contact me for details. FOREIGN BIDDERS: I am happy to send you a quote during the auction if you want to know how much it will cost. Items are declared as"Other: ebay" I will NOT mark them as'gift' I DO NOT under-declare item value on the invoice. Do not ask. SHIPPING- PACKING: I take packaging seriously. I know how fragile cast iron is. I use newspaper for small items. And packing peanuts only for very light items. I use a variety of bubble wrap and peanut-packs for most mid-size items. I do have costs associated with packaging materials, so please keep that in mind on the shipping amounts. Heavy items will be packaged using solid styrofoam block. It is very rare for the items I pack to be broken, as my feedback should attest. I do not
|
|
|
Used bl ade for Dito Dean TR21. Will be shipped Priority Mail.
|
|
Hobart FP200 High Volume Food Processor The high production Hobart FP200 is designed for cutting of vegetables. Fruits, and cheeses. A system of partition walls inside 7" feed head accepts food size ranging from single head of lettuce to stacks of tomatos or potatos. Easy to clean removable head Large 7" feed head Powerful 3/4 ho motor 485 RPM plate speed FREE SHIPPING! Comes with 1 grater plate Free shipping to a COMMERCIAL ADDRESS ONLY. Please call for residential delivery surcharge(usually $65- $125) Shipping insurance on this item is only $36, liftgate service $90. Extra fees we collect and pass through to carriers. Buy it now price always includes shipping insurance. To add shipping insurance or liftgate fee, simply make a note on Paypal or tell us when you call to pay with ... morecredit cards. Please be certain you want the item before making an offer. We file all non pays with ebay. Please call with any questions prior to purchase,better safe than sorry from both sides. See terms and conditions before purchasing. Quality Restaurant Supplies and Equipment Always at Affordable Prices PoBoys Discount 215 Church Street. Georgetown, SC 29440 Questions? Call Rodney or Dwayne at 843-545-7777 or e-mail eBay@PoBoysDiscount.com(when emailing please leave item description) We specialize in both new and used restaurant equipment and supplies. Whether it's for your commercial kitchen at your restaurant. Your outdoor kitchen at home, or even your man cave, everyone is welcome to purchase any of our restaurant supplies and cooking equipment. At PoBoys Discount, we pride ourselves in taking care of all our customers. Click here to ask an e-mail question Pay securely with any major credit card through Paypal. Or by phone directly with us! 843) 545-7777 Please read the following terms and conditions carefully before bidding. Our goal is to describe our items clearly. To respond to questions quickly and accurately, and to deliver your package promptly and safely. If you have any questions or concerns about an item, pl
|
|
Olde Tyme Commercial Nut Butter Mill: The Olde Tyme grinder is a commercial duty mill. It's perfectly suited to specialty food stores. Either as a self-serve machine or behind the counter. It's available with red or stainless steel cabinet. Now with an even stronger 1.5 HP high torque motor and NSF certification, the Olde Tyme is ready to tackle your most demanding needs. Production Rate: The Olde Tyme nut grinder produces 2.5 lbs. of nut butter per minute. Its heavy duty switch has an internal timer that can be adjusted to run from 1 second to 17 minutes. The machine is shipped with with the switch set to 24 seconds. Which produces 1 pound of nut butter. Fineness of Grind: The Olde Tyme mill makes spreadable nut butters containing fine-textured particles. Operation: The switch on ... morethe face of the motor cabinet turns the machine on. And nut butter is dispensed from the bottom of the milling head(at the bottom of the silver cap in photo at left. Internal timer controls run interval. Duty Cycle: All mills have heavy duty TEFC motors. TEFC" means"Totally Enclosed Fan Cooled" And the fan referred to is an integral part of the motor itself. Olde Tyme grinders have a 100% duty cycle, meaning that they will not overheat under steady use. Product Temperature: Nut butter output generally runs about 100-110° F. Electrical: Models for U.S.A. electric power(which is 60 HZ) are available in 110 volt/20 amp We're asking $1.295.00 for this mill. Please contact Chris at City Food Equipment for more information. Simply reply to this ad, or call me at(847) 952-9888 This item is available for local pick up or we can arrange delivery within the Chicago land area for a nominal charge. We also ship nationally/internationally. The buyer assumes all shipping costs. ABOUT US: City Food Equipment is an independent reseller of quality new and refurbished restaurant equipment. We stand behind every item we sell with a 90 day parts/labor warranty(refrigerated equipment: 30 day parts/labor) Through our Service C
|
|
|
Commercial industrial strength WARING FP510 food processor. Perfect for restaurant use. Ready to shred. Recently tested out& cleaned up to make sure it works appropriately& is presentable. Used but not abused condition. Strong motor. Solid construction. All 5 parts seen in the picture are included. Standard 4'4" long white plug-in cord in excellent condition as well. All 4 round rubber securing feet intact& complete. 120 Volts. 4.2 Amps. Measures 8" wide X 10 1/4" deep X 15 1/4" tall. Any questions answered asap.
|
|
|
THIS AUCTION IS FOR A DITO DEAN TR-22 FOOD SLICER. THE UNIT IS USED. BUT IN GREAT CONDITION. IT COMES WITH 5 SLICERS, THEY ARE $200.00 A PIECE NEW. IF YOU OWN ANY DELI, RESTAURANT, HOTEL OR FOOD SERVICE THEN YOU NEED THIS. THE UNIT COST OVER $3000.00 NEW. PLEASE ASK QUESTIONS. SHIPPING WILL BE $100/ WEIGHT. THANKS AND PLEASE QUESTIONS. Posted with
|
|
|
S Blade for Robot Coupe R2. In excellent used condition.
|
|
I HAVE UP FOR AUCTION THIS GREAT"ROBOT COUPE" SINGLE SPEED FOOD PROCESSOR. I DO NOT KNOW A LOT ABOUT THIS PRODUCT SO YOU WILL HAVE TO BE THE JUDGE. I WAS TOLD THAT THE INTERIOR IS MADE OF STAINLESS STEEL. MADE IN FRANCE PRIOR TO 1985. IT IS IN GREAT WORKING ORDER. PLEASE CHECK OUT MY PHOTOS AS I TRIED TO SHOW YOU EVERYTHING. ======================================================================= HERE IS ALL THE IMPORTANT INFORMATION FROM THE LABELS ON THE BOTTOM OF THE BASE: LABEL#1- PRODUCTION ROBOT COUPE SA FRANCE TYPE RC 2100 120 V 60HZ 6 AMP UL/ 14 B9 MADE IN FRANCE RC 2 B-LABEL#2- SERIE R 3189501-LABEL#3- THIS ONE IS DIFFICULT TO READ. 1985 CONTROL 18 ========================================== THANK YOU FOR YOUR INTEREST. PLEASE CHECK OUT MY STORE FOR OTHER ITEMS I HAVE UP FOR ... moreSALE AS I OFFER SHIPPING DISCOUNT ON MULTIPLE ITEMS SHIPPING TO THE SAME LOCATION AT THE SAME TIME.
|
|
|
Robot Coupe R2 Food Processor RG2 Grater Disc. Almost mint condition. It was used twice only. See pictures. Shipping is: $20 Canada and $25 USA.
|
|
|
Light-duty vegetable prep& vertical cutter-mixer. Prepare 400 servings in 3 hours. Extended shaft accommodates 21 different discs to slice. Shred, grate, and julienne. Bowl and stainless steel cutter blade designed for mixing, chopping, pureeing, blending, and kneading. Features Power: 3/4 HP- single phase 1 speed: 1725 rpm Induction motor. Magnetic safety system and motor brake. Attachments easily removed for cleaning Feed head tilts in the line of the motor base for space savings Stainless steel motor base Includes standard blade Comes with 5 blades: 2 shredders. 2 slicers, 1 julienne, and blade connector.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ef1f91dd1-0x104-
|
|
|
The name says it all.Dito Dean food prep large cutting plate. Marked MS 20. Used but very sharp. More information on request.
|
|
|
Waring Commercial Blender/ Stainless Steel Pitcher This is a one gallon capacity. Stainless steel, commercial blender/pitcher, with 2 locking latches! Manufacturer: Waring Country of Origin: US Model: 1 gallon Condition: Used. But in EXCELLENT condition! Accessories Included: Pictured item only. Terms: 14-Day Money Back Guarantee! Item ships via USPS If you have any questions. Please feel free to contact me directly prior to purchase. Thank you for your business!
|
|
From a state surplus sale. A WFP11S2 food processor hopper. Comes with WFP11S3B"sealed bowl cover"re and blade. NO PLUNGER. The safety interlock post works fine. Weight 1.5 lbs(Before packaging) Items ship from zip code 68512 in the U.S. Shipping costs quoted are to the continental states only. Anywhere else will be more. Payment is expected within 10 days. Otherwise I reserve the right to file for non-paying bidder,and re-list the item. SHIPPING-USPS: Please note that I am NOT responsible for the time the post office takes to deliver the package. Tracking numbers will show up in the'order details' section once I ship the item. SHIPPING-OTHER" If the shipping is'Other' then it is Fedex. Fedex does NOT ship to PO boxes. So please provide a"real" address. ... moreSHIPPING-COMBINED: I always do my best to combine multiple wins to save on shipping. I make full use of USPS flat rate boxes wherever possible. And will only charge you for one box if I can fit multiple wins in the same box. If you win more than one auction I will send you a new quote with new shipping. Also. I am happy to hold items for you if you plan on buying many items from me over time, in order to combine their shipping. This is at my discretion, for buyers with dodgy or low feedback. Contact me for details. FOREIGN BIDDERS: I am happy to send you a quote during the auction if you want to know how much it will cost. Items are declared as"Other: ebay" I will NOT mark them as'gift' I DO NOT under-declare item value on the invoice. Do not ask. SHIPPING- PACKING: I take packaging seriously. I know how fragile cast iron is. I use newspaper for small items. And packing peanuts only for very light items. I use a variety of bubble wrap and peanut-packs for most mid-size items. I do have costs associated with packaging materials, so please keep that in mind on the shipping amounts. Heavy items will be packaged using solid styrofoam block. It is very rare for the items I pack to be broken, as my feedback shou
|
|
From a state surplus sale. A WFP11 food processor. Works fine. They had tons of bowls for just this one machine, so bowls and so forth are for sale in separate listings. Weight 11.4 lbs(Before packaging) Items ship from zip code 68512 in the U.S. Shipping costs quoted are to the continental states only. Anywhere else will be more. Payment is expected within 10 days. Otherwise I reserve the right to file for non-paying bidder,and re-list the item. SHIPPING-USPS: Please note that I am NOT responsible for the time the post office takes to deliver the package. Tracking numbers will show up in the'order details' section once I ship the item. SHIPPING-OTHER" If the shipping is'Other' then it is Fedex. Fedex does NOT ship to PO boxes. So please provide a"real" address. ... moreSHIPPING-COMBINED: I always do my best to combine multiple wins to save on shipping. I make full use of USPS flat rate boxes wherever possible. And will only charge you for one box if I can fit multiple wins in the same box. If you win more than one auction I will send you a new quote with new shipping. Also. I am happy to hold items for you if you plan on buying many items from me over time, in order to combine their shipping. This is at my discretion, for buyers with dodgy or low feedback. Contact me for details. FOREIGN BIDDERS: I am happy to send you a quote during the auction if you want to know how much it will cost. Items are declared as"Other: ebay" I will NOT mark them as'gift' I DO NOT under-declare item value on the invoice. Do not ask. SHIPPING- PACKING: I take packaging seriously. I know how fragile cast iron is. I use newspaper for small items. And packing peanuts only for very light items. I use a variety of bubble wrap and peanut-packs for most mid-size items. I do have costs associated with packaging materials, so please keep that in mind on the shipping amounts. Heavy items will be packaged using solid styrofoam block. It is very rare for the items I pack to be broken, as my feedback shoul
|
|
Super Condition! Commercial Hobart Food Processor Dicing Blade Model: 83270 Hobart Dicer Grid For Hobart Food Processor Excellent Condition! 3/4" 20 mm) Holes Heavy Duty Commercial Plastic NSF Approved Made in USA Heavy duty Restaurant quality! Only includes what is in picture no extra attachments. THANK YOU for bidding! Works great- g uaranteed! FEEDBACK: Our goal is total customer satisfaction! We always give feedback after we know you are satisfied. We do our best to give you 5 Star service! If you feel you have received less than 5 Star service. Please let us know before leaving feedback so we can try to make it right. SHIPPING: We love to work with you on discounts for multiple purchases-please contact us and we'll give you more information! We try to ship within 1 business day ... moreor sooner after payment is received. Heavy. Bulky or fragile items may take slightly longer to give them TLC packaging. Buyer is responsible for any customs fees. RETURNS: Returns are accepted within 14 days. But you must contact us first. In the rare event that something would need to be returned, buyer is responsible for return postage unless we determine it is our mistake. Merchandise MUST be returned in the same condition it was received. There is a 15% restocking fee unless return is due to our mistake. If you have any questions or we can be of assistance please contact us. Check out my other items! Browse our REMODEL and MORE for more restaurant supplies! Powered by The free listing tool. List your items fast and easy and manage your active items. Hallde. Berkel, Robot Coupe, Mannhart
|
|
|
12" tall. X 7.5" x 12&1/4" base. Gears move smoothly. Seems very sturdy, and able to go back to work. Base has Crack as seen in last picture. Base is still sturdy and secure.I think this base was added after market, so could easily be replaced or taken off. Stain on top, may need sanding and re oiling. I cleaned up unit with non toxic natural wood cleaner. Oiled with non toxic almond oil. Other than crack in wood base, I see no other issues in structure. I unscrewed wood handle from unit, to ship. I charge no extra for shipping, Just the straight shipping cost. If you choose UPS it will take a day or 2 longer to get item shipped, as I am a bit far from UPS store.
|
|
|
Large half intch chopping and slicing blade for the Dito Dean food prep food processor.
|
|
|
The name says it all. Dito Dean food prep 1/4 inch veggie slicing blade. Used but very sharp.more information on request.
|
|
|
Qualheim Commercial Food Processor Chopper Model 200. made in Racine Wis. USA by Qualheim inc. used good working condition(See Video) missing 1 push rod, includes 1 choping or slicing blade, this is heavy duty(70lbs) will be shipped in 2 boxes for the price of the 1st to insure small enough and weight wise to go standard ground 1st package(without door) is 55lbs, the 2nd package(door) will ship seperate free,well packed and insured,see video link below,other blade are availble online, for shredding, chop, dice, different blades for different purposes, also the door may be interchangable for other intake sizes? the missing straight push would also be easy to find, or make. thanks for looking v=nj-FbtqupOg 3j.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bij%7Fil7g%3E3j-13f04c55a9c-0xfe-
|
|
Globe GFP700 1.5 H.P. Food Processor The original retail price was $4364 It is in good condition and was just serviced by a professional. It comes with one blade(value of $200) You can purchase more blades for this machine. This food processor is used in many restaurants. Below are the specs from GLOBE* GFP700 Food Processors Standard Features• Motor 1 1/2 HP motor Plate speed of 280 RPMs Sealed planetary gear transmission with permanent grease lubrication Automatic reset thermal overload protection• Other• All polished cast aluminum construction q GFP700- Food Processor Creates Brunoise(small diamond shape) and Gaufrette(waffle design) cuts Process up to 1.700 lbs. per hour Ideal for up to 1,000 servings per meal• Cutting versatility• 35 discs are available for the GFP700• No discs are included ... morewith unit. Must be ordered separately• 6 foot cord and plug No plastic components Ergonomic 45° food hopper incline Hopper latch is both on/off switch and safety interlock Removable hopper head and food pusher(no tools required) Discs are cast aluminum with removable stainless steel knives Stainless steel knives are hardened. Ground. And hand polished Food Processors GFP700 Food Processors GFP700 Motor: 1 1/2 HP. 115-60-1, 10 amps, automatic reset thermal overload protection. On/Off Latch: The hopper latch serves as the on/off switch and interlock for the hopper head. The unit will not operate with the hopper head open or unlatched. Gear Drive: Sealed planetary gear transmission with permanent grease lubrication. Output 280 RPMs. Design: Ergonomic 45° incline for convenient feeding. Cutting, and ejection of food. Separate food hopper permits continuous cutting of long products. Also, when a Brunoise or Gaufrette disc is used the separate food hopper creates theseuniquecuts. Thefoodpusher enables even pressure to be applied whencuttingfood. Thehopper head, foodpusher, and cutting discs are easily removable, without the use of tools, for quick cleaning. Interlocks: The food pro
|
|
|
Perfect working order Dito Dean TR21 Commercial Food Processor. Also Includes J7 Blade
|
|
|
Fits Touch& Go Blending Station Polycarbonate door cover only P.S WE HAVE 3 OF THEM. FEEL FREE TO ASK QUESTION. WILLING TO GO LOWER IF YOU BUY ALL 3. THANK YOU. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bi%3Ahtpqto%3E%7B-13f135b981a-0xfd-
|
|
Insinger 50VP-2 w Vegtable Potato Peeler USED TESTED I plugged in. it powered on and spun. no problem. Works good. From the internet. retails for almost 6k. Insinger's 50VP-2 Vegetable Peeler can peel 50 pounds of vegetables in 45 seconds. Stainless steel hopper Stainless steel cabinet Stainless steel feet Stainless steel peel trap Stainless steel screen Stainless steel disc and discharge door Unique wave pattern stainless steel disc Specifications: Manufacturer: Insinger Model: 50VP-2 List Price: $7.300 Width: 29 1/2" Depth: 32 1/2" Height: 56 1/4" Weight: 215 Volts: 115 Local pick up only. However, I can strap to a skid a shrink wrap, for free. You send your truck to pick up at my commercial address, in las Vegas,NV 89122. I have no dock, but do have a forklift to load.Freightquote.com ... moreis a good place to get a estimate for you to have this picked up. You are also welcome to come preview them item. Just send us a message. To get your freight shipping estimate. You will need to know the following. The item will be placed on a standard pallet 40X48, or larger if necessary. It will be shipped from a commercial facility. We will load the truck with our forklift. Weight with pallet is 215. Dimentions are 62"h x 40"w x 42" d. WE COMBINE SHIPPING IF POSSIBLE. LOCAL PICK UP IS ALWAYS WELCOMED PAYMENTS ARE DUE WITHIN 3 DAYS(72)HOURS. PLEASE MAKE PAYMENTS WITHIN THIS TIME. OR CONTACT US IF THERE IS A PROBLEM. WE DO OUR BEST TO LIST ITEMS AS WE SEE THEM. TEST THEM OR HEAR THEM.WE ARE LIQUIDATORS, AND DO NOT HAVE EXTENSIVE KNOWLEDGE OF EVERYTHING WE SELL. INFORMATION IS GIVEN AS TO WHAT WE KNOW OR SEE. TO HELP IN YOUR DETERMINATION OF PURCHASE. PLEASE REVIEW DESCRIPTION AND PHOTOS AS TO CONDITION OF ITEMS AND/OR WHAT IS INCLUDED WITH ITEM. RETURNS ARE ACCEPTED FOR MISREPRESENTED ITEMS ONLY. PLEASE CHECK OUR OTHER AUCTIONS. AS THERE ARE MANY LISTED. IF BIDDING/BUYING FROM ALASKA OR HAWAII. PLEASE CONTACT US PRIOR TO PURCHASING FOR SHIPPING COSTS.AMOUNT MAY BE HIGHER THAN IN DESCRIPTION. Inte
|
|
Globe GFP700 1.5 H.P. Food Processor It is in good condition and was just serviced by a professional. It comes with two blade(value of $400) You can purchase more blades for this machine. This food processor is used in many restaurants. Below are the specs from GLOBE* GFP700 Food Processors Standard Features• Motor 1 1/2 HP motor Plate speed of 280 RPMs Sealed planetary gear transmission with permanent grease lubrication Automatic reset thermal overload protection• Other• All polished cast aluminumconstruction q GFP700- Food Processor Creates Brunoise(small diamond shape) and Gaufrette(waffle design) cuts Process up to 1.700 lbs. per hourIdeal for up to 1,000 servings per meal• Cutting versatility• 35 discs are available for the GFP700• No discs are included with unit. Must be ordered separately• ... more6 foot cord and plug No plastic components Ergonomic 45° food hopper incline Hopper latch is both on/off switch and safety interlock Removable hopper head and food pusher(no tools required) Discs are cast aluminum with removable stainless steel knives Stainless steel knives are hardened, ground. And hand polished Food Processors GFP700 Food Processors GFP700 Motor: 1 1/2 HP. 115-60-1, 10amps, automatic reset thermaloverload protection. On/Off Latch: The hopper latchserves as the on/off switch andinterlock for the hopper head. Theunit will not operate with the hopperhead open or unlatched. Gear Drive: Sealed planetary geartransmission with permanent greaselubrication. Output 280 RPMs. Design: Ergonomic 45° incline forconvenient feeding. Cutting, andejection of food. Separate foodhopper permits continuous cutting oflong products. Also, when aBrunoise or Gaufrette disc is usedthe separate food hopper createstheseuniquecuts. Thefoodpusherenables even pressure to be appliedwhencuttingfood. Thehopperhead, foodpusher, and cutting discsare easily removable, without theuse of tools, for quick cleaning. Interlocks: The food processor willoperate only if the hopper head isclosed and latche
|
|
|
This cutter blade that came with an FPC15 Food Processor. I'm calling it used. See pics to judge condition. I should fit Waring Models: 11FP10 11FP28 11FP29 11FP44 31FP12 31FP13 31FP15 31FP58 31FP83 31FP85 31FP85/86 31FP86 31FP91 31FP93 32FP12 32FP13 32FP15 FP510 FPC10 FPC12 FPC14 FPC15 FPC15D FPC70 FPC99 FPX10 FPX15 Thanks for Looking
|
|
|
This is a used. Working McGraw-Edison Toastmaster Food Processor Model F1100 BASE ONLY. Made in Japan- Don't see these often Has a button that needs to be pushed down by bowl to operate- see pic Motor seems STRONG Thanks for Looking
|
|
Main Overview Side Top Lid Bowl Controls" title="Next" |" title="End" An industrial-sized food processor/chopper with variable speeds. The information plate is worn on the unit. And we're not sure what make nor model it is. It has three speed settings: High, Low, and Jog( as well as a safety Stop switch(the latter is required to open the bowl) Comes with a blade and stirring paddle(to sift product during mid-operation, insures consistency and flow) Runs on 208-240 3-phase power. Serial: FH00261. Power Source: 208-240V. 3-phase, 20 Amps. Our skilled on-site technicians inspect and certify each piece of equipment. Before it ever leaves our bay door. We want you to be happy with your purchase! Preferred Payment Methods: PayPal gladly accepted. Credit/Debit Cards ... moregladly accepted during office hours. Inquire for details. Certified/Cashier's Checks. And Money Orders also accepted. Inquire for details. Shipping: Freight shipping. At buyer's expense. We can arrange shipping, at buyer's option. Packaging fees may apply. Rates vary by purchase. Delivery is also available. In the Greater Detroit Area. Inquire for details. We have a semi-truck loading dock and bay. For your convenience. Returns: Our"no return" policy is not adamant-if you have a good reason. We'll listen and try to work with you for an agreeable solution.
|
|
|
UP FOR AUCTION GRINDMASTER PERFECTLY PURE COMMERCIAL PEANUT GRINDER MODEL# 3000. THE MACHINE IS CLEAN. WITH ONLY FEW SCRATCHES IT'S IN GOOD WORKING CONDITION, HERE ARE THE SPECS:115 VOLTS, 12 AMPS AND 60 Hz. THE PLASTIC HOPPER IS NOT PERFECT, IT'S BENT ON FEW DIFFRENT SPOTS AROUND EDGE AND TWO BROKEN SPOTS DUE TO OVERHEATING IN STORAGE. GO OVER THE PICTURES TO SEE PMPERFECTION. BESIDES THAT GRINDER IS GREAT CONDITION. WINNING BIDDER WILL PAY $92.50 TO LOWER 48 STATES. ITEM WILL BE SHIPPED WITHIN 48 HOURS AFTER RECEIVING CLEARED PAYMENT. WE ONLY ACCEPT PAYPAL AS PAYMENT METHODS. ANY QUESTIONS OR CONCERN PLASE CONTACT SELLER BEFORE YOU BIDD THANKS FOR LOOKING IN AND GOOD LUCK c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13f2af9890c-0xf7-
|
|
|
Used Robot Coupe#28130 Dicing Disc DS0- CL50 Posted with
|
|
|
Used Robot Coupe#28119- CL50 Dicing Grid 10 Posted with.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*73c7e%3D%3E-13f2dad9016-0xf1-
|
|
UP FOR AUCTION IS THIS NEARLY NEW R2DICE FOOD PROCESSOR. IT HAS BEEN USED MAYBE A DOZEN TIME. THIS FOOD PROCESSOR LOOKS AND RUNS EXCELLENT. IT HAS A FEW VERY MINOR SCRATCHES. COMES WITH THE ORIGINAL BOX AND OWNERS MANUAL. THANK YOU FOR LOOKING. The Robot Coupe R2 Dice commercial food processor is a multi-purpose machine suitable for any commercial kitchen. A handy continuous feed vegetable prep attachment designed for quality continuous feed slicing. Dicing, shredding, grating and julienne is standard as well as a 3 quart gray bowl attachment designed for vertical cutting and mixing. The vegetable prep attachment accommodates 21 different processing discs(2mm grating disc and 4mm slicing disc included) and 3 dicing kits(10mm dicing kit included) allowing you to control how you want your veggies ... moreprepped. The R2Dice also features a powerful direct drive, fan-cooled, 2 horsepower motor to assure you that you can prepare 850 servings in 3 hours or less! Features• Commercial food processor• Prepares 850 servings in 3 hours or less• 3 quart plastic bowl with handle• Kidney-shaped opening• Continuous feed vegetable prep attachment• Includes"S" blade. 2 mm(5/64" grating disc, 4 mm(5/32" slicing disc and 10mm(3/8" dicing kit• On/off and pulse switch• Direct drive• 1725 RPM• 120V. 13 amps, 2 HP• 1-year parts and labor warranty• 3-year motor warranty• ETL listed Specs Capacity: 3 qt, Volts: 120, Amps: 13, Horsepower: 2,
|
|
|
Manufacturer: Robot Coupe Model# R6N Description: Heavy Duty Commercial Food Processor 208V- 60Hz 3 Phase Motor, See my collection: Condition of unit: Used but in excellent working condition. Normal wear and tear but got plenty of life left in this. Unit as shown in pictures. Terms of Sale: Paypal payment due within 72-hour of auction ending. Shipping quoted is for lower 48-States only. Others please inquire. Any question please email me. Posted with
|
|
|
You are bidding on a robot coupe 25 quart tilting mixer. Chopper, blender and bread kneader. This is a very nice unit, the tilting bowl makes it easy to mix large batches and simply tilt the bowl and pour your batch into the serving or storing container. The bowl is removable for easy cleaning. This unit has been tested and is in good working order. This unit can be seen at 1757 Park Dr Traverse City MI 49686 and you can call with any questions at 23-421-9292. Any and all shipping cost is the responsibility of the buyer. Robot Coupe 25 quart mixer Model# R25T Serial# 000352 Manufacture# 0-12 230V 60Hz 3 phase 23/19 AMP Dimension 22"x34"x41"
|
|
|
Condition: Used, Price $95.00 Availability In Stock There are NO ADDITIONAL charges if you are picking the item up from our warehouse location and we are glad to help you load the item. Please bring rope or tie downs to fasten the item securely. See our other Items on our company website at mikesupply Dot com for the newest items that have just arrived. 714)648-0788 Warehouse Hours: Monday-Friday 9 Am to 5 Pm Our Warehouse is Located at 1638 E. Edinger Ave. Santa Ana. Ca 92705 The Above Shipping quotes are for THE LOWER 48 States Only. Hawaii and Alaska are EXTRA CHARGES and need to be quoted before you Purchase. We DO NOT ship to Canada. But will Package the item and send it on Your carrier. You will need to email us all the proper Paperwork prior to shipping.
|
|
|
My business recently purchased newer blenders for the facility so I am selling this one. Blendtec18 Model:ICB5. Works great. Has some wear which can be seen in the pictures but overall an amazing piece of machinery. Blender only. No containers as we kept those to use with the newer model Blendtecs we purchased. Power Watts: 2000 Volts: 120 Measurements Width: 10.25" 26.04 cm. Height: 10.25" 26.04 cm. Depth: 9.98" 25.35 cm. Weight: 25.00 lbs. 10.43 kg. Any questions please do not hesitate to ask. Posted with
|
|
|
Robot Coupe Blixer BX4 Food Processor. Unit Has 4 Qt. Capacity. 2 H/P With 2 Speeds. 1725/ 3450 RPM. This Processor Is 208 Volts/ 3 Phase And Includes Everything In Photos. Stainless Steel Bowl.Stainless Steel Blade,Lid,And Food Wiper. Excellent Condition. Available For Inspection In Phoenix.AZ. Shipping Cost For Continental U.S.A. Only. Tested And Works.
|
|
| Search: Spec. Sheet, Warranty, Specifications SKU: 148623, Manufacturer: Robot Coupe, Model: CL 50 SERIES D, Serial Number: 3150 212003Y 11, List price: $3.613.00 Weight: 51 lbs. Width: 12 in. Depth: 14 in. Height: 23.5 in. Powered by: 120 volts, Phases: 1 Our Store Categories effepbdc Finance This Equipment For Your Business Available for purchases totalling $2.000 or more Used Robot Coupe CL 50 SERIES D Commercial Restaurant Food Processor FREE SHIPPING! To receive Free Shipping. This item must be completely paid for at the time of checkout. Offer does not include packing, handling, lift gate fees, residential delivery fees, or taxes. Valid only for Customers within the 48 Contiguous States ZipCode: Restaurant Equipment warehouse located in Norcross. GA 30093, Customer Pick Up Available( ... moreDirections to our Restaurant Equipment Warehouse) Item: Robot Coupe Commercial Food Processor Metal Base Model Number: CL50 Ideal for corporate cafeterias and restaurants. Features Metal motor base Induction motor Magnetic safety system and motor base Motor: 1.5HP. Single phase, 1 speed, 425 RPM Auto restart of machine with half-moon shaped pusher Metal vegetable preparation attachment with half moon hopper and a cylindrical hopper(1) Disc included: 1/8" 3mm) slicing disc This is a used item and there are scratches.Nicks,dings and discoloration from use. The plastic round push rod is chewed up on the end,due to daily use. A Restaurant Equipment Technician inspected the electrical system of this unit. And it appears to be working properly. This item weighs 51 lbs. but we have added 20 lbs. to the weight for packing and shipping. Prior to placing your bid on this item please use the Shipping Calculator provided above to calculate the actual shipping cost to your destination. We strive to offer good shipping charges. However the size of restaurant equipment, and the cost of gas, means that freight can be expensive. Consider this amount when placing your bid, as it will be added to the final auctio
|
|
ROBOT COUPE R18 D 18 QUART VERTICAL FOOD PROCESSOR Vestco Food Equipment Robot Coupe R18 D 18 Quart Vertical Food Processor Great working condition! 18 quart capacity Stainless steel bowl See through lid Open chute to add ingredients while mixing Easy to clean Two speed. And pulse setting 220v 1 phase 20 amps FOR MORE INFORMATION CALL US AT 760-747-1970 Trust your equipment needs to people with integrity. Resources and know-how. Vestco Food Equipment not only offers a wide array of program options and competitive pricing, but is fully committed to providing you with the personalized care and professional expertise that you deserve. We will ensure that your equipment needs are not only properly identified, but capably met. Owner Gary Vest knows how to help his clients weigh their options. Not ... moreone to rush in. He begins with the first step-building confidence and trust. Vest knows the value of time and is available to meet customers at their place of business. Vest's approach is based on sincere attention to customer needs together with his business philosophy of quality. Integrity and professionalism. Feel free to contact us for any of your restaurant and bakery equipment needs. You may reach one of our sales representatives by phone. E-mail, or by simply filling out the customer service form below. Our staff at Vestco Food Equipment will be more than happy to assist you. Operation Hours: Monday through Friday 8 A.M. to 3:30 P.M. PST Address: Vestco Food Equipment. Inc. 1220 INDUSTRIAL AVENUE ESCONDIDO, CA 92029 Telephone& Fax: Tel: 888) 324-9849(Toll Free) Tel: 760) 747-1970 Fax: 760) 747-1939 lm3vhp.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60%3Elm3vhp-13f4536d7b5-0xfa-
|
|
This is an Olde Tyme Food Products model PN-1 Peanut Butter maker. It is commercial grade and runs on standard 115 Volts current. It is in working condition and makes great peanut butter. The Auger may need replacing at your discretion[ see pics]available from manufacturer] there is some damage to it but it does not seem to affect the operations of the unit at all. There are also some surface scratches and paint chips[easily repaintableif desired] and on the lid of the hopper a corner of the plastic has broken off, this also does not affect the operation of the unit. Hopper also has some discoloring from use, the peanuts stained the plastic but it is clean. Shipping price includes insurance and signature confirmation. Hopper will be shipped in a seperate box to avoid any damage from the heavy ... moreunit which weighs about 50 lbs. The unit has been well-maintained. And has been disassembled and cleaned. This is a heavy Commercial Duty Unit such as used in Healthfood Stores and currently retail for $2,400. It has been testedwith roasted peanuts and is in working condition. The grinder will hold up to 20 lbs. of peanuts(with hopper) I found complete instructions for use online and am including them Unit is very simple to use. Just fill the hopper and flip the switch on, making sure you have a container under the the bottom of the milling head located at the bottom of the black cap to catch your fresh Peanut Butter. Also very easy to cleanup, requires no tools. The Olde Tyme PN-1 will grind-Peanuts, Honey Roasted Peanuts, Almonds, Pecans, Macademia Nuts, Hazel Nuts, Pistachios, Cacao Beans and Cashews in either roasted or blanched form. Raw Nuts of the same types can also be ground but texture will vary between types when ground raw. Products not grindable: Sesame Seeds. Pumpkin Seeds, Flax, Walnuts Electrical: Plugs into a standard 115 volt/ 20 amp outlet Duty Cycle: All Units have heavy duty TEFC motors[ totally enclosed fan cooled] Grinders have a 100% duty cycle which means they will not overheat under steady
|
|
|
HOBART FP150 The Hobart FP150-1A is a continuous feed food processor. It provides reliable performance using a planetary gear drive. So there's no rest required between loads. The interlock protection prevents the machine from running when the pusher plate swings away from the hopper. The plates feature"Diwash" and cutlery grade stainless steel cutting surfaces for optimum results. Red OFF. Green ON Buttons, Compact Design, Angled Front(50 Degrees) Planetary Drive, Large Full Size Feed Hopper, All Aluminum Hopper and Housing, Double Interlock Switch, Plate Speed 396 RPM, Estimated Ship time is 3-12 Days(free shipping) What you see is what you get. It has been tested and it works great, comes with a 3/8 10 blade
|
|
|
Here is the HOBART FP-41. It has general wear and is missing a rubber foot on the bottom(see pic) It turns on and spins in both modes but makes a sound like something is hitting when it turns. The shaft looks like its rubbing on the bowl because the space is not even around it. The bowl is not hard to take on or off and everything spins. I obviously am not an expert so I will answer questions the best I can. This one is way cheaper than any other available. I will listen to buy it now offers. I have tried to describe this the best I could. It is really heavy and will cost a bunch to ship so I would rather not get it back. Please ask questions or ask for more pics if you do not understand something.
|
|
|
This Hobart 84186-1 food processor with#12 hub features an 18" stainless steel bowl. With 20 RPM bowl rotation. The 84186-1 has cutlery-grade, stainless steel knives that rotate at 1725 RPM, with a stainless steel knife comb and 3" stainless steel legs with rubber feet. On the 84186-1, you can remove the bowl cover, knives and bowl without the use of tools, and it also features a safety lock for the bowl cover. For durability and sanitary purposes, the 84186-1's housing is 1-piece, burnished aluminum, and contains no cracks or crevices to allow food product to hide and cross-contaminate. This 84186- 1 has a 6' flexible cord, a 1 hp motor and is 115/60/1. NSF listed.
|
|
|
QUALHEIM FOOD PROCESSOR MFG: QUALHEIM MODEL# 440 SERIAL#97211F UNIT WAS BROUGHT IN ON TRADE FOR ANOTHER ITEM THAT WE HAD PREVIOUSLY LISTED ON EBAY. UNIT WAS CHECKED OUT BY OUR IN-HOUSE SERVICE TECH AND FOUND TO BE WORKING GOOD. UNIT IS SOLD AS IS THOUGH. WITH NO WARRANTY. NOTE: BUYER IS REQUIRED TO SUBMIT PAYMENT WITHIN 48 HRS OF PURCHASE. NOTE: BUYER IS RESPONSIBLE FOR SCHEDULING AND PAYING FOR FREIGHT OR PICK-UP OF UNIT. FEATURES& SPECS VOLTS: 115 AMPS: 6.4 PHASE: 1 UNIT IS USED AS A VEGETABLE SLICER. SHREDDER& GRATER UNIT COMES WITH A TOTAL OF(3) VARIOUS STYLES OF BLADES. SHIPPING INFO: CHEF SUPPLY 1512 W. MAIN STREET LOUISVILLE. KY 40203 502-585-1907 EXT 106 SHIPPING DIMENSIONS: 48 X 42 X 24 SHIPPING WEIGHT: 150LB FREIGHT CLASS: 85
|
|
Hobart FP100 This auction is for one Hobart FP100 food processor. This is a powerful counter top unit. Come with an almost new 3/8" 10mm) slicing disk. Lots of other grating/ slicing/ dicing plates are available for this food processor. Works fine and ready to use. 120v standard plug. These sell new for $3000. Will be shipped via UPS. Or can be picked up. Any questions? Just ask. Bid with confidence. Email me if you have any questions. All items listed are described to the best of my ability. And are sold as-is. Items are carefully packaged and shipped. I will not be liable for damage in shipping. If you have any problems, I will try to resolve them. I expect payment within three days unless you email me and make other arrangements. Click here to see my other items for more great deals. ... moreRcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13f5b40d61d-0x106-
|
|
|
Lightly used Robo Coupe S/S Bowl. Comes with 2 new pins and springs. New Bowls sell for $900.
|
|
|
Nice Waring FP25 2.5-Qt. Batch Bowl Food Processor. The bowl top is broken and missing the blades. On Jun-22-13 at 07:21:34 PDT. Seller added the following information: ON SHIPPING! uShip is the first and largest auction style marketplace for shipping and transportation services. SHIPPING PRICE ESTIMATOR. Delivery ZIP Code: Item Weight: lbs. MORE RESOURCES:
|
|
|
Great tamale making machine. Saves hours of hard labor. Easy to use. Just fill each cylinder with masa and meat and crank away!
|
|
|
Robot Coupe CL50 Series D Commercial Food Processor. Comes with a total of 5 blades. 3 Chopping and 2 shredding. In good working condition and good preowned condition with scratches and marks from normal use. The plastic pusher on top has 2 chips in it and the plastic blade on the bottom has a crack in it. Otherwise very good shape. Please see all the pics. Winning bidder pays $60.00 Shipping. GOOD LUCK! Check out my other auctions to save on shipping.
|
|
|
I have a used shrimp pro 2000. I used in restaurant for a month and the size shrimp we used barely fit through it so we ended up jut doing by hand. It comes with the tray which is sold seperately for 50-70. There is a guy on eBay that sells these new without tray for $670. And that's a good price for this machine. It can do shrimp up to u-10. We had u10 but on big size. More like a u8. It cuts the back so you can peel and devein easy. Can set depth to whatever you want even to butterfly the shrimp too. Works great. There's a small crack in the black housing that doesn't affect performance. Half off what it would cost new. If you have any questions let me know. Posted with
|
|
|
Please read full description prior to bidding. Available are four(4) slicing plates/blades and one(1) Shredder plate that were acqiured from an estate sale along with a non-working Hobart Food Processer.Model FP100. The following Hallde Sweden Plates are available: 1) 5/32- 4, 1) 7/32- 6, 1) 3/8- 10, 1) 3/16- 4.5, 1) Shredder Plate 4 5. Also included is a 1/16- 1.5 Slicing Plate that is cracked at left side of plate near blade(see pic)maybe can be repaired? Plates/blades all show surface wear. Scratches, nicks due to normal use. Please view all the pics closely and be aware of the crack in the 1/16- 1.5 plate(double bladed) and ask any question. Concerns prior to bidding. Thanks!
|
|
Slightly used EXTRUDER PASTA MACHINE ITALGI P17 ITALGI PASTA MACHINE EXTRUDER ITALGI MODEL P17 BUILT IN 2002. VERY LOW HOURS, HOURLY PRODUCTION KGS. 15. ELECTRICAL EQUIPMENT 220/380V- 3 PHASES- 50/60 Hz. DOUBLE OVER TURNABLE HOPPER, WITH 5 NEW DIES FEEL FREE TO CALL Ben FOR ANY INFO: 540-239-2031 local pick up is also available item Located in Blacksburg VA 24060 SHIPPING: Buyer is responsible for all shipping charges· Shipping weight 325 lbs PAYMENT: Winning bidder will be contacted via email within 24 hours after auction closing· Payment can be made by PayPal. Payment through PayPal must be received within 3- day period after auction closing· Feel free asking seller on payment means· at 540-239-2031 Item will be shipped within 4-8 days receipt of confirmed payment. Even ... morewith a“PayPal confirmed address” NO shipping will be made prior confirming of: Residential or business receiving address? Business name if any? Contact name Complete shipping address(no P.O. Box)Phone# For Freight shipping unloading conditions& needs will have to be specified: Business location or not? Unloading dock? if you Lift gate need Driver help needed inside? If you have any question please ask before bidding COMMITMENT: Your bid is a contract· Place a bid only if you are serious& able of buying this item. If you are the winning bidder you will enter into a legally contract to purchase the item from the seller· IMPORTANT: If you are a new comer into the Ebay family please understand that bidding is your commitment to purchase the item. More importantly if you use the“BUY IT NOW” offer the auction will end and you WILL HAVE to pay for the item& shipping If you have any doubt or question please contact the seller before bidding 540-239-2031* GOOD LUCK AND THANK YOU FOR BIDDING*
|
|
|
Ditto Dean model TR-23 food processor. WORKS GREAT.QUIET.SMOOTH 115 volts 19 H x 19 D x 10 W. Ready to put in use. A heavy duty unit!
|
|
|
Very Nice Machine. For Dicing Slicing etc. 120 volt. in G.C. one rubber foot missing and No Cutting Blades, a great buy at this Price. Or Make an Offer jy.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw4sjm5%3Ejy-13f8187d1c7-0xfd-
|
|
|
You are bidding on 7 Hallde Sweden slicer blades that fit a Hobart FP100. Blades are in good to great condition. Some are dirty and a few of the actual blades have a small ding on them. There are 2 with double blades. One is marked 1/16#1,5 and the other has no markings but looks to be the same size. There are 3 7/32#6, 3/8#10 and a 5/32#4. Items sold as is like all auctions so email with any questions. Thanks for looking.
|
|
Quickly prepare up to 1200 servings in three hours or less with the Robot Coupe CL50E continuous feed food processor. This sturdy machine features one. 6 3/5" x 3" kidney-shaped hopper and one, 2" diameter cylindrical hopper to accommodate vegetables and other items in a variety of shapes and sizes. This versatile unit can slice. Dice, shred, grate, julienne, and even make French fries with one of the 38 available processing discs. A 1/8" slicing disc and a 1/8" grating disc are included so you can start processing right away! This machine's heavy duty belt drive 1.5 HP motor is fan cooled and includes a magnetic safety system and motor brake. For additional convenience, the machine attachments may be easily removed for cleaning. The Robot Coupe CL50E is ETL Listed ... moreand requires a 120V electrical connection for operation. Overall Dimensions: Width: 12" Depth: 15" Height: 13"
|
|
|
this lot includes 5 Dito Dean food cutting blades and plates. This inclu des the small grating blade. 1/2 inch chopping blade. 1/4 inch veggie slicing blade. Fine cutting plate and the large cutting plate. each blade is in good condition and is worth over the price of the lot buy them and use them or resell them for profit. do not let this deal get away.
|
|
|
Manufacturer: Hobart Model# HCM61 Description: Heavy Duty Commercial Food Processor Comes with 24 Cups stainless Steel Bowl and blade as shown. 120V- 60Hz 1.5 HP Single Phase Motor See my collection: Condition of unit: Used but in excellent working condition. Normal wear and tear but got plenty of life left in this. Unit as shown in pictures. Terms of Sale: Paypal payment due within 72-hour of auction ending. Shipping quoted is for lower 48-States only. Others please inquire. Any question please email me. Posted with
|
|
THIS IS A ROBOT COUPE R-2 BASE UNIT IS IN GOOD SHAPE# Shipping on this item is 25.00 to the lower 48 states. If you are from overseas or Alaska or Hawaii please email me for a shipping quote. Please understand if it is going out of the country it can take between 3 and 6 weeks depending on customs. If item is weight is over 150 pounds too large for Fedex it will need to be sent Freight This will require a commercial address name of Business phone number if it is going to a residential address there will be extra 100.00 charge also if lift gate is needed that is a additional charge Please email me with this information. If it is not shown in the picture then it probably does not come with the item please email me if you have a question before purchasing. Paypal Is accepted. All Items will be ... moreshipped out within 48 hours of purchase if it is a item that must be palletized I need a commercial address and phone number. If you have any problems with the item please email us so we can work the problem out. Thank You For Looking At Are Item120. 1?RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Feog4d72f%2B%3E%3B1%3F-13f96dc73d7-0xfe-
|
|
Robot Coupe Slicer Blade 3mm GENUINE. OEM, EXCELLENT CONDITION, IN ORIGINAL BOX! For use with Robot Coupe commercial food processors. This item is in excellent condition and will ship in its original box. Don't be fooled by imitations or knock-offs! If it's listed on eBay for super cheap. Chances are it's too good to be true and might damage your very expensive Robot Coupe processor! Be sure to use only authentic OEM blades with it, like this one. Questions? Ask away. Thank you for your interest and consideration. And be sure to check out all of the other great items I am selling on eBay. I'm always selling lots of great restaurant equipment and supplies for ridiculously low prices. If you are interested in multiple items, feel free to make me an offer. I am happy to sell and ... moreship multiple items together to save you money. SK Restaurant Equipment& Supply"The best value in restaurant equipment and supplies on eBay. Period. Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
Great buy for someone looking for a great machine at a bargain price. Retails around $1.200. Perfect for home or commercial use. Posted with dhep.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bishm%3Ed%7Fhep-13f9b47b1aa-0xfc-
|
|
A gently used. Well maintained Robot Coupe R2N CLR food processor Used for 18 months and meticulously cared for Please make your bid count by bid ding realistic. I will ship immediately upon payment confirmation Thank you for viewing my listing Manufacturers Detail: Prepare 850 servings in 3 hours or less! Vegetable prep attachment specially designed for quality. Continuous feed slicing, shredding, grating and julienne. Accomodates 21 different processing blades. Bowl attachment designed for vertical cutting and mixing: mix, chop, puree, blend, mix and knead doughs. Ref No. R2NCLR 120V/60/1. Machine Diagrams can be accessed under the. These files are password protected and can only be accessed by Authorized Robot Coupe Customers and Service Agencies. Your User ID is your Robot Coupe Customer ... morenumber and the Password is your zip code that Robot Coupe has on file. All other inquires can contact our Customer Service Department at 800-824-1646. Power: 1 HP—Single phase. 1 speed: 1725 rpm. Induction motor. Magnetic safety system and motor brake. Delivered with: 3 Qt. clear cutter bowl in polycarbonate and stainless steel“S” blade included. Vegetable preparation attachment with external ejection. 2 disc included: R209(2mm) 5/64" grating disc and R211(4mm) 5/32" slicing disc. Complete selection of 21 stainless steel discs available. Dimensions(H×L×W) 19 1/4" × 15 3/4" × 8 3/4" Extended H: 25 1/4" Approx. Shipping Weight: 31 lbs. Approx. Carton Size: 20 1/4" × 15 3/4" × 10"Cube 1.85, ETL Electrical and Sanitation Listed/CETL(Canada) 3 year motor warranty. 1 year parts and labor.
|
|
|
Continuous feed attachment. 2 blades and blade carrier. Blades r211 and r209 for older r2 unit. Great condition with no housing cracks.
|
|
HOBART FP-150 Up for sale is this used food processor. It works fine and never had a problem with it, works great. The Hobart FP150-1A is a continuous feed food processor. It provides reliable performance using a planetary gear drive. So there's no rest required between loads. The interlock protection prevents the machine from running when the pusher plate swings away from the hopper. The plates feature"Dish wash" and cutlery grade stainless steel cutting surfaces for optimum results. Red OFF. Green ON Buttons Compact Design Angled Front(50 Degrees) Planetary Drive Large Full Size Feed Hopper All Aluminum Hopper and Housing Double Interlock Switch Plate Speed 396 RPM Estimated Ship time is 3-12 Days(free shipping) What you see is what you get. It has been tested and it works ... moregreat, comes with a 3/8 10 blade FEEL FREE TO SEND US YOUR QUESTIONS! WE STAND BEHIND OUR SALES. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*05e54c%3E-13fb242dbf8-0xfa-
|
|
|
General model#GSM-1/66 top replacement. Good condition, pusher works good, so does latch. Hit the BUY IT NOW& SAVE BIG! Please be sure this fits your model& year. If your unsure please email me or call with model& dimensions or pics, as there are several other models over the years. Also if you are looking for any other parts to this machine let me know I have several. Shipping is a Flat $25 to the continental USA NOTE: THIS ITEM WILL NOT SHIP UNTIL AFTER SEPTEMBER 18TH IF PURCHASED TODAY ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13fb33cf0f9-0xfd-
|
|
|
very clean.Well taken care of, All new up seals on upper shafts,casters are in good shape,needle head is in great shape,this is a real good looking and running machine just have no longer a need for it. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13fb74f816b-0x100-
|
|
|
Very well kept Robot Coupe R2. From a home not a restaurant. Infrequently used. Runs perfectly. The base looks like new. The bowl and lid look good but show general wear. No cracks anywhere. The S blade is still very sharp. Happy Bidding
|
|
Landa Electric Grater This Landa electric grater was purchased from a restaurant in Manhattan. It is in good working condition. Dimensions: 16"h) x 18.5"w) x 8"d) Weight: 30 lbs. For more detailed information on this unit feel free to contact us at 718-522-2656. Please call or email us for a shipping quote before bidding. Local pick up is available at no extra charge! Payment Info Pay now call(718) 522-2656 9AM– 5PM– Monday– Friday Time: 5 days from auction end Tax: 8.875% sales tax will be added to any pick up or any shipments within New York State. Type: Visa. MasterCard, American Express, Discover, Paypal, Money Orders, and checks. Method: The fastest and easiest methods are: credit card over the phone and PayPal. Slower methods are checks or money orders via USPS. Non-Payment: ... moreWe understand that things may occur and you may not be able to proceed with the transaction. We ask with mutual respect that you let us know within a few days so we may get our money back from eBay and sell the item to someone else. Shipping Info Quotes/ Shipping prices Call(718) 522-2656 9AM– 5PM Monday to Friday for a detailed freight quote. Freight quote may also be requested by emailing Time: We will ship your unit(s) within 24 hours from payment date. Type: Let us know if we are shipping to a business or a residence. Method: Food service equipment may be heavy and truck platforms are often 5 feet off the ground. If you do not have a loading dock or forklift. You will require a liftgate, which is a mechanical platform attached to the truck which lowers your equipment to the ground. Inspect: Only sign for freight or packages after inspecting the unit thoroughly. For more detailed questions concerning shipping please call or visit our About Me Page Please take a look at our crating video to get an idea of what goes into our crating jobs!
|
|
USED* OLD TYME PEANUT BUTTER GRINDER M ODEL# P.N.1 NEW THIS ITEM COSTS MUCH. MUCH MORE! SAVE BIG $$$$$ NOW! THIS ITEM WAS REMOVED FROM A WORKING ENVIRONMENT AND PLACED IN OUR WAREHOUSE. IT HAS BEEN TESTED AND IS WORKING; CLEANED AND IS SPOTLESS. WHAT YOU SEE IS WHAT YOU GET. AND THIS ITEM IS BEING SOLD AS-IS WITH NO WARRANTY OR GUARANTEE. ELECTRICAL REQUIREMENTS: 115 VOLT- 1 PHASE- 15 AMPS- 60 Hz. SHIPPING& HANDLING DETAILS: We do not charge extra for packing/ palletizing. It will be shipped via FedEx Ground If the item is damaged when it is delivered DO NOT accept the delivery. No International Shipping; Domestic United States Only. Local pick up is acceptable with no fee. PAYMENT DETAILS& TERMS: We accept Paypal. Check, All Credit/ Debit Cards, Cash. Sales tax applies for local pick ... moreups or if the item is shipped to a Georgia, United States address. Please pay with in 1-Day after the item is purchased, otherwise we have the right to cancel your bid/ offer. All used equipment is sold AS-IS and without warranty. If you have questions do not hesitate to ask. We are a business and only operate on weekdays. All items listed on eBay are always available for purchase in person in our warehouse. RETURNS: We do our best to make sure that we represent the items we sell accurately. We only issue refunds if our description was not accurate and within 30 days of purchase. The buyer must contact us within 2 days of the delivery if there is a problem. We accept returns within 30 days of the purchase. There is a 10% restocking fee for all returns. The buyer is responsible for all return shipping charges.
|
|
|
Commercial counter top cheese grater with bowl.works great.just bought a Hobart 60 QT mixer with a Pelican grinder and as the result I don't need it anymore. I bought it used 5 years ago for $500 Im looking to get rid of it quick.Over $1000 new.gonna start the bidding at $99.00 plus shipping.Its heavy so figure about $60.00 for shipping.
|
|
|
Salad Dryer Designed with a brake to extend the life of the gears, Heavy duty. FDA approved plastic provides a reliable and safe product, Patented. Innovative"Braking System" will protect and increase the life of the gears, Convenient side handles allow for quick and safe transport, Comfortable finger grip handle on the crank will maximize productivity and minimize operator fatigue, No assembly required- Ready to use out of the box, Can spin both clockwise and counter-clockwise, Crank shaft is made of rust resistant commercial grade chrome plated brass, Large 5 gallon capacity accommodates approximately 5-6 heads of lettuce, ETL certification, Warranty: One Year, Dimensions: 24" H x 17.25" Dia,
|
|
|
Robot Coupe Commercial Food Processor. R6N Chopper, Slicer, LIKE NEW) WORKS GREAT/ USED ONLY FEW TIMES! Item Description: This is a Robot Coupe Commercial Food Processor. R6N Made by Robot Coupe Model R6N 220 volt. 3 phase Comes with attachment(see photos) 4 BLADES Approx. dimensions: 12”W) x 14.75”L) x 25.75“H)
|
|
|
This is a Hobart FP350-1 commercial food processor. It is in great working condition. Very Powerful! Comes with everything pictured. All reasonable offers will be considered. Machine will be shipped in two double walled heavy duty boxes due to the weight and size of the machine. Shipping is free. Plate Selections Operations Manual Parts Manual Spec Sheet
|
|
|
ebay template KitchenAid•Widemouth•KFPW760•12 Cup•Red•Food Processor•Attachments: Thick Shredding Disc. 2 Slicing Discs. 1 Full Bottom Base Blade. 1 Small Half Based Blade. 1 Spatula. 1 Plastic Mixer Blade. 1 Disc Stop. Length: 10" Width: 8" Height: 16" with top on) Stored Smoke Free. Pictures show all. Thank you for shopping! We offer a 20% discount on shipping when purchasing multiple items. All used items are sold as is Please visit our store at Put your listings on autopilot with Kyozou
|
|
|
CHROME ROBOT COUPE RC 2B FOOD PROCCESSOR BASE ONLY WORKS GREAT
|
|
Vintage Hollymatic Holly Jr Patty Machine Press Cast Aluminum Holly Jr Patty machine.Automatic meat forming and makes pattys up to 5 inches. Good condition.Shows signs of use. Made of cast alumium. 13 1/4 inches long 8 inches wide at the widest part. Unit itself is 6 inches tall Operates smoothly and has predrilled factory holes so is easily mounted. Clean and in great working order. Great Pieces to add to your collection or for everyday use. Please view the pictures. As they are a part of the descriptions. I am not an expert, I leave that up to you. If you have any questions. Please ask. I will reply promptly. I can ship internationally, please contact me for a price. Please view my many other items Pavailable for bidding. I will try to combine shipping when you buy more than 1 item FEEDBACK ... morePOLICY: Positive feedback is important for both the buyer and the seller and impacts the ability to continue to buy and sell. I would greatly appreciate you leaving me positive feedback if the transaction has gone well. If you have any concerns about the transaction. Please contact me to work it out, prior to leaving me negative feedback or opening a case. This makes all transactions much smoother for all of us. 1700
|
|
This is a USED Robo Coupe CL-50. Great working condition. Some signs of use and ware. Vegetable prep specialty machine designed for speciality cuts that are difficult and time consuming to prepare by hand. The waffle/gaufrette and brunoise cuts can be achieved quickly and perfectly every time with this exclusive patented model. Also. Can produce quality continuous feed slicing, dicing, shredding, grating, french fry, and julienne. Accommodates 44 different processing discs. Ref No. CL50Gourmet. Machine Diagrams can be accessed under the. These files are password protected and can only be accessed by Authorized Robot Coupe Customers and Service Agencies. Your User ID is your Robot Coupe Customer number and the Password is your zip code that Robot Coupe has on file. All other inquires can contact ... moreour Customer Service Department at 800-824-1646. Exclusive"patented" machine that has waffle/gaufrette and brunoise cuts capability in addition to all the additional cuts of the standard CL50D, Power: 1.5 HP—Single phase. 1 speed: 425 rpm. Induction motor. Magnetic safety system and motor brake. All metal motor base. Automatic restart of the machine with the half-moon shaped pusher. Delivered with: All metal vegetable prep attachment with a half moon hopper(L×W—7 3/16" × 3" and a cylindrical hopper(diameter 2 5/16" for specialty cuts. Removal catch pan with lid for small quantities of brunoise. 2 discs included: C446SA(3mm) 1/8" slicing disc and C450GPA(3mm) 1/8" grating disc, Complete selection of 44 discs available. Dimensions: H×L×W) 23.5" × 14" × 12" Cube: 3.5, Approx. shipping weight—51 lbs, ETL electrical and sanitation listed/cETL(Canada) NEMA# 5-15P,
|
|
|
Krups The Butcher Shop with all pieces pictured. The small meat grinder disc is rusted all others are mostly unused. I live in a smoke free/ pet free home Posted with
|
|
Here are 12 pieces that go to a Waring Commercial Continuous Feed Food Processor FPC15. I don't know if they would fit an other model or not. Not sure how old these pieces are. We had the whole processor to use in our family business, but, the business closed 5 years ago, and we just came across this box with the remaining pieces, do not know what happened to the base with the motor. Definitely don't need these now. There is the bowl with lid, plunger, a cone like shaped thing, that is open on both ends, two s-shaped blades, one that is sharper than the other, not sure what the not sharp one is for, maybe dough? Then there are 5 disc blades, too. They are in the original box, which is soiled from sitting all these years, but, we hardly used the processor, so these pieces are in good ... moreshape. The middle stem on the round discs measures 1 1/2 inches long, the discs are about 6 inches across. On the S-Shaped blades the stem in the middle is about 4 inches long, they are about 6 inches across. Great if you have a base that these items would fit! Please use the postal calculator to determine the cost of postage to the U. S. IF OUTSIDE OF THE U. S. PLEASE EMAIL ME FOR A POSTAGE PRICE. I only accept PayPal for payment. Thank you!
|
|
ROBOT COUPE R2N COMMERCIAL FOOD PROCESSOR + 2 BOWLS CONTINUOUS FEED BLADES FOR SALE HERE WE HAVE THIS AWSOME ROBOT COUPE COMMERCIAL FOOD PROCESSOR MODEL R2N COMES FROM A WORKING RESTAURANT THAT IS CLOSING DOWN. HAS SCRATCHES/SCUFFS/DIRT FROM KITCHEN USAGE BUT WORKS GREAT COMES WITH THE CONTINIUOUS FEED ATTACHMENT. 2 BOWLS ONE PLASTIC ONE STAINLESS AND ONE TOP, ALSO COUPLE OF BLADES, I DON'T KNOW EXACTLY WHAT BLADE GOES WITH WHAT, HOW THEY ATTACH OR IF ANYTHING IS MISSING, YOU WILL GET EVERYTHING YOU SEE IN THE PICTURES RETURNS- YOU CAN RETURN THIS ITEM WITHIN 10 DAYS OF RECEIVING IT. IF YOU ARE NOT SATISFIED FOR ANY REASON AT ALL, NO QUESTION ASKED,YOU WILL GET REFUNDED ONCE THE ITEM IS BACK HERE BUT SHIPPING BACK WILL BE AT YOUR EXPENCE-NO EXEPTIONS, PLEASE NOTE THAT BEFORE BIDDING SHIPPING- ... moreWILL BE $45 IN THE USA LOWER 48 STATES, WE DON'T SHIP TO ANY COUNTRY OUT OUTSIDE OF THE USA INCLUDING MEXCICO AND CANADA IF YOU LIVE IN HI. AK, OR PR. PLEASE EMAIL ME BEFORE BIDDING SO I CAN TELL YOU IF I CAN SHIP IT TO YOU AND HOW MUCH IT WILL COST, SOME ITEMS I WILL NOT BE ABLE TO SHIP TO YOU AT ALL I SHIP UPS GROUND ONLY SO NO P.O BOXES. ONLY REAL ADDRESS NO PERSONAL PICK-UP AVAILABLE AT ALL. EVEN IF YOU LIVE CLOSE BY I WILL ONLY SHIP IT TO YOU, SORRY Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Fixed Shipping Charges. Shipping Carrier Domestic Ups Ground $45.00 I will ship to: United States a pretty image. templates with Vendio Sales Manager. Vendio provides powerful selling automation for sellers of all sizes. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
ROBOT COUPE R6V COMMERCIAL FOOD PROCESSOR CHOPPER SLICER WITH BLADE FOR SALE HERE WE HAVE THIS GREAT ROBOT COUPE COMMERCIAL FOOD PROCESSOR MODEL R6V IT COMES WITH THE BLADE SHOWN BUT NO BOWL OR FEED OR ANY OTHER ATTACHMENT. COMES FROM A WORKING RESTAURANT THAT WAS CLOSING DOWN, HAS SCRATCHES/SCUFFS/DIRT FROM KITCHEN USAGE, WORK GREAT COMES EXACTLY AS SHOWN RETURNS- YOU CAN RETURN THIS ITEM WITHIN 10 DAYS OF RECEIVING IT. IF YOU ARE NOT SATISFIED FOR ANY REASON AT ALL, NO QUESTION ASKED,YOU WILL GET REFUNDED ONCE THE ITEM IS BACK HERE BUT SHIPPING BACK WILL BE AT YOUR EXPENCE-NO EXEPTIONS, PLEASE NOTE THAT BEFORE BIDDING SHIPPING- WILL BE $56 IN THE USA LOWER 48 STATES, WE DON'T SHIP TO ANY COUNTRY OUT OUTSIDE OF THE USA INCLUDING MEXCICO AND CANADA IF YOU LIVE IN HI. AK, OR PR. PLEASE ... moreEMAIL ME BEFORE BIDDING SO I CAN TELL YOU IF I CAN SHIP IT TO YOU AND HOW MUCH IT WILL COST, SOME ITEMS I WILL NOT BE ABLE TO SHIP TO YOU AT ALL I SHIP UPS GROUND ONLY SO NO P.O BOXES. ONLY REAL ADDRESS NO PERSONAL PICK-UP AVAILABLE AT ALL. EVEN IF YOU LIVE CLOSE BY I WILL ONLY SHIP IT TO YOU, SORRY Condition: Used andale andalesell. Payment Options: PayPal Shipping Options: Domestic shipping: Fixed Shipping Charges. Shipping Carrier Domestic Ups Ground $56.00 I will ship to: United States a pretty image. templates with Vendio Sales Manager. Vendio provides powerful selling automation for sellers of all sizes. Click Here. Double your traffic. Get Vendio Gallery- Now FREE!
|
|
|