|
|
Order by: |
Buy It Now
$28.00 Shipping
Condition: Used Location: Forsyth, United States
6 changers and large lot of parts, large amount of parts are new , tried to get all parts in pics , but too many small pieces, you get everything in this listing
Buy It Now
Free Shipping
Condition: New Location: Buena Vista, United States
Fits Dixie Narco vending machines: 180, 240, 276, 276E, 360, 368, 419, 440, 501, 501T, 501E, 600 and 600E. Fits Vendo Soda vending machine models: 312, 407, 470, 475, 511, 540, 601, 720, and 721. Fan blower motor 115V, 9W, 1550 RPM, CW rotation.
0 bids $14.99 Shipping
Condition: New Location: Aurora, United States
Buy It Now
$14.30 Shipping
Condition: Used Location: Rancho Cucamonga, United States
Supplied with Standard Soda Face. This validator will not work on a single price soda machine. Not supplied with cable harness. Similar to photos THIS IS A 24V/MDB VALIDATOR.
0 bids $14.99 Shipping
Condition: Used Location: , United States
mei bill acceptor with ccr bezal. Refurbished Very good, takes $1 ,2, 5, 10 and 20sThey do not have harness or cover ..
Buy It Now
Free Shipping
Condition: New Location: Laurel, United States
Buy It Now
Free Shipping
Condition: New Location: Lancaster, United States
(1)Dixie Narco. (1)New vending machine plug lock. All locks are keyed alike with two (2) keys for each lock. This lock will most any vending machine with a t-handle including, but not limited to (3) Royal Vendors.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Including: one quarter turn T- handle + cam + inner cylinder lock with 2 keys per lock.
Buy It Now
Free Shipping
Condition: New Location: Mission Viejo, United States
Buy It Now
$15.00 Shipping
Condition: Seller refurbished Location: Medford, United States
2 - This picker will only work in a Bev Max 2 that has been updated to take the newer Picker Cup. These units have been through a complete factory authorized refurbish and then tested. Similar to item shown in picture.
Buy It Now
Free Shipping
Condition: New Location: Montrose, United States
Bill Acceptor Width : 62-74 mm. Interface : Pulse / RS232 or Pulse / CC Talk or Pulse / ID003. Acceptance Rate : 96%. Bill insertion : Four way acceptable.
Buy It Now
$9.50 Shipping
Condition: For parts or not working Location: Cincinnati, United States
COINCO MagPro MAG32R Bill Acceptor Validator 470501290.
Buy It Now
$4.99 Shipping
Condition: New Location: Lancaster, United States
(1)New Royal Vendors 660-9 (RVCC 660-9) vending machine plug lock. All locks are keyed alike with two (2) keys for each lock. This lock will most any vending machine with a t-handle including, but not limited to.
0 bids Free Shipping
Condition: Seller refurbished Location: Orlando, United States
Cashcode Acceptor MSM-3091 Bill Validator Note Validator Banknote Validator MSM-3091 for Kiosk ATM/Banking. Cashcode Acceptor MSM-3024 Bill Validator Note Validator Banknote Validator MSM-3024 for ATM/Banking.
Buy It Now
Free Shipping
Condition: Used Location: Portland, United States
Royal Vendors soda vending machine main control board. This board will work for the following models 500, 550, 650, 660, 804. Pretty sure this board has the eprom chip in it for a royal 660 coke machine. So u will need to pull the eprom off your board and put it in this board if you do not have a 660. Used boards they are dusty don’t expect perfection or don’t buy. Used tested working.
Buy It Now
Free Shipping
Condition: New Location: Portland, United States
Brand new USI/FSI/Fawn/Wittern snack vending machine key pad fits models: 3013a, 3014a, 3015a, 3039, 3044, 3045, 3046, 3076, 3077, 2097, 2098, 2099.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Short Quarter Turn (BLACK) + cylinder lock inserted with 2 keys+ cam.
Buy It Now
$26.94 Shipping
Condition: Seller refurbished Location: Los Angeles, United States
Coinco S75-9800 coin acceptor-changer--110v, 9 pin plug. Its converted to accept Q uarters only to avoid coin jams. Set up for Correct change only- does not give change. Will fit all single price soda machines.
Buy It Now
Free Shipping
Condition: New Location: Manheim, United States
T - Handle Receiver Nut Mounting Bracket Assembly. For Dixie Narco "E" series soda vending machines including models 276E, 501E, 522E & 600E. T - handle Nuts tend to wear out from opening and closing machine door.
Buy It Now
Free Shipping
Condition: Used Location: Chicago, United States
Used item. I have not tested these as there are way too many to test put am under good faith as these are the stanby units that would be swapped with. Buisness sat untouched since 2013. Bill box included, good condition units, minor scuffs, good bill bands/belts.
Buy It Now
Free Shipping
Condition: Used Location: Portland, United States
Vendo Soda vending machine main control board VEC 5.1B. This works for Pepsi models 480, 510, 511, 601. This will not work for coke machines that is VEC 5.2B. Make sure you check no returns on boards at all! Used tested working.
Buy It Now
Free Shipping
Condition: New Location: Manheim, United States
FSI FAWN / USI 6 ct. Dual Soup Coils for the snack vending machine.This is for 1 set / 1 left and 1 right small coil. This is a common coil for most FSI, USI, Wittern & Vendnet dual coil snack machines.
Buy It Now
$8.99 Shipping
Condition: Used Location: , United States
Used. Tested and working.
Buy It Now
$4.99 Shipping
Condition: New Location: Lancaster, United States
These labels are custom made, dye cut and printed on 80 lb., matte paper. Will fit the Dixie Narco 300, Dixie Narco 346, Dixie Narco 360, Vendo and other similar machines. AHA Sparkling Water - 12 oz.
Buy It Now
Free Shipping
Condition: New Location: Manheim, United States
"Can" Vend Label Kit for Royal Vendors 660, 804, 550 drink vending machines. The kit includes 1 of ea of (10) flavors;Coke, Diet Coke, Diet Coke Caffeine Free, Cherry Coke, Sprite, Fanta Orange, Fanta Grape, Barq's Root Beer, Dr. Pepper & Seagram's Ginger Ale.
Buy It Now
Free Shipping
Condition: New Location: Manheim, United States
CRANE NATIONAL GPL 157, 158, 159, 160, 167, 168, 171, 172, 173, 633, 653, 780, 797 SNACK / COMBO / COFFEE VENDING MACHINE COIN CHUTE ASSEMBLY. This coin chute will fit other Crane National GPL Machines not listed.
Buy It Now
$9.99 Shipping
Condition: New – Open box Location: Gaithersburg, United States
This is 10 selection buttons used on different vending machines including live display vending machines. Royal 650 models and Dixie Narco 501E and 276E live display models. Easy to install.
0 bids Free Shipping
Condition: Used Location: Michigan City, United States
Model MK4 Universal Hopper.
Buy It Now
$19.99 Shipping
Condition: New Location: Aurora, United States
BRAND NEW IN THE BOX DIXIE NARCO BEV-MAX 4 Robotic Hand picker ASSEMBLY THIS THE LATES REVISION BY DIXIE NARCO USING MICRO SWITCH SENSOR ON THE BOTTOM This Unit will work on Bev-max IV glass front soda machine with extended cup PLEASE SEE THE PICTURES BRAND NEW IN THE BOX US BIDDERS ONLY
0 bids Free Shipping
Condition: New – Open box Location: Portland, United States
Buy It Now
$24.50 Shipping
Condition: Seller refurbished Location: Nashville, United States
Buy It Now
$19.99 Shipping
Condition: Seller refurbished Location: Aurora, United States
MARS CPI GRYPHON COIN ACCEPTOR 34VOLT WITH MDB. 3 TUBE quarter. 1 TUBE nickel.
0 bids $19.99 Shipping
Condition: Seller refurbished Location: Hazel Park, United States
CONLUX MCM5 COIN MECH WITH US-4 CASSETTE. Condition is Seller refurbished. Shipped with USPS Priority Mail.
Buy It Now
Free Shipping
Condition: Used Location: , United States
Shows lots of use.
Buy It Now
Free Shipping
Condition: Used Location: Nashville, United States
Buy It Now
Free Shipping
Condition: New Location: Manheim, United States
The part# is CR101208.
0 bids $49.00 Shipping
Condition: Used Location: Portland, United States
The BP4SX runs on MDB 24/34 volts only, and is available in MDB only. It is compatible with any MDB vending machine. Bezel style: Coinco "snack" style bezel. Bill box size: Flex Stack starts at 300, expands to 500 bills.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Used for: Motorcycle、Car、Vending Machine,etc.4 keys per lock. High Security Finland Cylinder Lock FOR T-handle.
0 bids Free Shipping
Condition: Used Location: Southampton, United States
Buy It Now
$17.99 Shipping
Condition: Seller refurbished Location: Aurora, United States
ONE UNIT MARS VN2512-U5M BILL ACCEPTOR 24VOLT WITH MDB. THIS UNIT WILL WORK ON ANY VENDING MACHINE WHO USE 24VOLT MDB. THIS MARS VN2512-U5 IS INDENTICAL TO REPLACE YOUR MARS VN2542-U5.
Buy It Now
Free Shipping
Condition: New Location: Manheim, United States
Door Switch for Dixie Narco Multi - Price Soda Vending Machines - including 276E, 501T, 501E & 600E Models. Then door switch is bad and needs replaced. This switch is located on the inside of machine door half way up.
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Including: one quarter turn T- handle+cam, without inner cylinder lock. Screws are not included.
0 bids $10.00 Shipping
Condition: Used Location: West Frankfort, United States
This unit is being sold as is.
Buy It Now
Free Shipping
Condition: Used Location: Portland, United States
This is a single column bottle shim for full shine Dixie Narco soda vending machines flat or bubble front. This will NOT work on any glass front or shallow depth machines or single price machines. Models this will work in: 276e, 501e, 600e. This shim will allow you to vend 20oz & 16.9oz bottles! This will not work with any cans! Used good shapePart no: 80570115001
0 bids $2.50 Shipping
Condition: Used Location: Albemarle, United States
THESE FIT LANCE VENDING MACHINES. (2) LAN 15. (3) LAN 17. "THIS IS FOR ONLY 1 KEY YOU PICK".
Buy It Now
Free Shipping
Condition: New Location: Chino, United States
Used for: Motorcycle, Car, Vending Machine, etc 2 keys per lock.
Buy It Now
Free Shipping
Condition: Used Location: Gambrills, United States
Buy It Now
Free Shipping
Condition: New Location: Evansville, United States
Buy It Now
Free Shipping
Condition: New Location: Manheim, United States
Door Switch for most Vendo soda vending machines including 475, 480, 510, 511, 630, 720, 721, 821, 840.
Buy It Now
$4.99 Shipping
Condition: New Location: Lancaster, United States
Buy It Now
Free Shipping
Condition: Used Location: Milford, United States
Bill Acceptor Validator Stacker. Stacker bezel -. USED /LOT OF 6 PAIRS !
Buy It Now
Free Shipping
Condition: New Location: Laurel, United States
There are 10 dip switches on the side of the validator. The owner’s manual of the validator explains how the dip switches work. The eprom you will received has 32 pins.
Buy It Now
Free Shipping
Condition: New Location: Manheim, United States
These rotor rods are used to prevent two drink products from falling.
Buy It Now
Free Shipping
Condition: New Location: Rancho Cucamonga, United States
Buy It Now
$15.00 Shipping
Condition: Seller refurbished Location: Medford, United States
Buy It Now
Free Shipping
Condition: New Location: Lancaster, United States
For sale are (6)CUSTOM Dixie Narco DNCB 240 138 Flavor Strip/Vend Label Our labels are custom made, dye cut and printed on 80 lb.
Buy It Now
Free Shipping
Condition: New Location: Las Vegas, United States
National 147, 148, 157, 158 and 167 snack vending machines. Nat'l 623, 627, 633, 655 and 677 coffee vending machines. These will fit the following model machines.
Buy It Now
$8.00 Shipping
Condition: Seller refurbished Location: Laurel, United States
Buy It Now
$21.90 Shipping
Condition: Used Location: Nashville, United States
0 bids Free Shipping
Condition: Seller refurbished Location: Madisonville, United States
VN 2512 24v/mdb $1's only. complete with bezel and billbox. Tested, working, as seen in pictures. Sold as is.
|
|
|
|
Fully functioning coin mechs for Anteres drink. Snack or combo machines. These units are in graet shape and cna be set from 5 cents to one dollar. I have approx 50 units and once their gone their gone. I have them priced to move. They are in gray and black. I will try to send the requested color but cannot gurarantee.color request.
|
|
|
Bidding on 2- Coca Cola Vendo machine Shelves. Came out of Vendo 90 but fit other models. 20 1/2" long(end to end including front hooking piece) Please ask any questions c2g3.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp*5f%3Ec2g3-13df7c3dd20-0x101-
|
|
|
Hi TRC-6512. Used mars coin mech Works ill dirty Removed from working unit Prob should rebuild soon but works fine now Vendall 781-849-8256 Posted with
|
|
|
This is a 2.5 in snack delivery coil for the antares combo machine.Good condition. 1f3eb5.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28%3E1f3eb5-13e9015c155-0xf5-
|
|
|
This is a 4in snack delivery coil for the anteres combo machine.Good condition.More than 6 available
|
|
|
Set of 4 Mars Bill Validators All tested with dollar bills These only take $1 bills
|
|
|
Removed in working condition to add new door assy. Sale includes main board.Digital display board and the connecting ribbon.
|
|
|
I offer one or more mechanical drink machine coin mechanisms; used but guaranteed to be in good working condition. Prices can be set from 25 cents to one dollar. The mechanisms were removed from vandalized machines or those removed from service. I could not sell the machines so I am parting them out for mechanisms. Compressors, etc. Check my other sales for snack machine mechanisms and contact me if you need a compressor. Price is $25(I have seen them selling on ebay for $50 or more) each and $5 shipping. I will combine shipping if you buy more than one to save you money. Payment by Paypal.
|
|
|
Unsure if it works. Sold as is. For parts. Posted with
|
|
Lot Of 2 25 Cent Coin Mechanisms NRI. National Rejectors Inc Each measures approx. 6 1/4" x 5" Some sur face rust on steel marks. Pitting on chrome None have been tested Great for parts or for repair Selling here in as is condition Pretty clean but some of the springs or smaller parts may be missing Use the easy calculator below to determine shipping cost to your zip code. Shipping will be combined on multiple items purchased according to the weight and size of the package. Normally for US shipping.50 is added to each additional item purchased unless additional they are heavy or large. International shipping will be combined according to the size& weight of the package. PayPal accepted. Payment is expected within 7 days of winning notice. Item will be re-listed after 7 days& ... moreeBay fee refund process started. Please note I describe my items as accurately& honestly as possible All items sold in as is condition with no warranty If you do not agree with these terms please do not buy Thank you for checking out my item
|
|
Lot Of 2 Vintage 25 Cent Coin Mechanisms NRI. National Rejectors Inc 8000-1& 600501 Each measures approx. 6 1/4" x 5" Some sur face rust on steel marks. Pitting on chrome None have been tested Great for parts or for repair Selling here in as is condition Pretty clean but some of the springs or smaller parts may be missing Use the easy calculator below to determine shipping cost to your zip code. Shipping will be combined on multiple items purchased according to the weight and size of the package. Normally for US shipping.50 is added to each additional item purchased unless additional they are heavy or large. International shipping will be combined according to the size& weight of the package. PayPal accepted. Payment is expected within 7 days of winning notice. Item will ... morebe re-listed after 7 days& eBay fee refund process started. Please note I describe my items as accurately& honestly as possible All items sold in as is condition with no warranty If you do not agree with these terms please do not buy Thank you for checking out my item
|
|
Vintage Coin Mechanism M ade by NRI. National Rejectors Inc Can't find a number on this one, not marked with a manufacturer's name but looks like a common NRI mechanism 12 prong plug Measures approx. 7 1/2" long x 3 7/8" wide x 4 3/4" deep Some sur face rust on steel marks. Pitting on chrome None have been tested Great for parts or for repair Selling here in as is condition Pretty clean but some of the springs or smaller parts may be missing Use the easy calculator below to determine shipping cost to your zip code. Shipping will be combined on multiple items purchased according to the weight and size of the package. Normally for US shipping.50 is added to each additional item purchased unless additional they are heavy or large. International shipping will be combined ... moreaccording to the size& weight of the package. PayPal accepted. Payment is expected within 7 days of winning notice. Item will be re-listed after 7 days& eBay fee refund process started. Please note I describe my items as accurately& honestly as possible All items sold in as is condition with no warranty If you do not agree with these terms please do not buy Thank you for checking out my item
|
|
Lot Of 2 Coin Mechanisms M ade by NRI. National Rejectors Inc Each measures approx. 6 1/4" x 5" Some sur face rust on steel marks. Pitting on chrome None have been tested Great for parts or for repair Selling here in as is condition Pretty clean but some of the springs or smaller parts may be missing Use the easy calculator below to determine shipping cost to your zip code. Shipping will be combined on multiple items purchased according to the weight and size of the package. Normally for US shipping.50 is added to each additional item purchased unless additional they are heavy or large. International shipping will be combined according to the size& weight of the package. PayPal accepted. Payment is expected within 7 days of winning notice. Item will be re-listed after 7 days& ... moreeBay fee refund process started. Please note I describe my items as accurately& honestly as possible All items sold in as is condition with no warranty If you do not agree with these terms please do not buy Thank you for checking out my item
|
|
Lot Of 2 10 Cent Coin Mechanisms One is marked NRI. One is marked Coin Acceptance the last one has no manufacturer's name Each measures approx. 4" x 3 1/2" x 1/2" Some sur face rust on steel marks. Pitting on chrome None have been tested Great for parts or for repair Selling here in as is condition Pretty clean but some of the springs or smaller parts may be missing Use the easy calculator below to determine shipping cost to your zip code. Shipping will be combined on multiple items purchased according to the weight and size of the package. Normally for US shipping.50 is added to each additional item purchased unless additional they are heavy or large. International shipping will be combined according to the size& weight of the package. PayPal accepted. Payment is expected ... morewithin 7 days of winning notice. Item will be re-listed after 7 days& eBay fee refund process started. Please note I describe my items as accurately& honestly as possible All items sold in as is condition with no warranty If you do not agree with these terms please do not buy Thank you for checking out my item
|
|
|
Well fonction vending machine Posted with
|
|
|
Good condition coin acceptor. Buyer must pick up. Posted with
|
|
|
Extra coin acceptor from our vending business this one gives nickels and dimes back as change have several more if interested. Posted with
|
|
|
Coinco Mag52R in excellent working condition. Coinco Refurbished. Accepts all old and new(colored bills) $1. $5, $10 and $20. Comes with standard 500 bill capacity bill magazine. This unit replaces all Coinco BA32R, BA52R,and Mag32R. It has the slimline bezel with the proper 6 pin connectors. Do not attempt to purchase this unit to replace any other Coinco models except those listed above. I can offer a DOA replacement warranty. Sorry, ship to lower 48 states only. Thank You, Good Bidding
|
|
|
Hi u are bidding on a complete automatic products front display.Programing board,keypad and coin chute assembly From a ap model 310 vending machine Removed from a great working machine Questions please call vendall parts ask for Ronnie Soxs 781-849-8256 30 day warranty
|
|
|
Hi you are bidding on a used rowe 548 universal control board Removed from my own machine works great Warranty board is working not DOA vendall 781-849-8256 Posted with
|
|
|
Hi you are bidding on 1 used mei mars VN 2502 u5 24 volt dollar bill validator used Pulled from a great working machine Warranty to be in good working condition! Questions call vendall parts 781-849-8256 Ask for Ronnie Soxs Posted with
|
|
|
Hi you are bidding on 1 Automatic products(AP) model 310 vending machine control module This was pulled from a working frozen food machine Warranty 30 days
|
|
Coinco MAG50 100% Guranteed to work! This can work on both MDB 24V AND 117 volt machines! Does not accept(2008) $5. Will accept all $1's If you are looking for a MagPro acceptor that accepts new currency please check out my other auction items. Like always I'am the best bargain! Stop losing money by frequent jams or your old acceptor not taking bills alltogether replace it today! EASY INSTALLATION Simple plug n play installation. Only takes about 5 Minutes to replaces and basic tools! If you can plug in your lamp you can change this out! Ready to make you money! Stop trying to save pennies while your loose hundreds of dollars! Please call me if you have any questions or if you are looking for a different model. Ships same day if paid by 10am PST. OceanViewVendingStore.com 626-274-7165 ... more``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13ebc38d06e-0x105-
|
|
|
What you are bidding on is a Used but Factory refurbished.VN4510 coin changer for Vending machines. This particular one for auction comes with a removable coin holder that holds(2) slots for dollars, 1) slot for Quarters and(1) slot for nickels. This item is guaranteed for 90 Days.
|
|
|
This is a Coinco 9340-S Coin Mech for a Single price vending machine. It is in working condition. Tested and works great. g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13ebf7f879d-0xf7-
|
|
|
MEI Mars Vending Machine Coin Mechanism With Adapter Cabl e 24 Volt Model# VN 2512 U3 Manufacturer Refurbished and Set Up For Newer $5 Please view the photo closely. Satisfaction Guaranteed! We care about our 100% rating! If you are not satisfied. Your money will be cheerfully refunded! We combine shipping at no additional charge. Please view our other auctions to save money on shipping. If you should choose to add to your order. Please do not pay until you are invoiced. This will allow me to consolidate shipping charges. Please Note That We Do Not Ship Internationally Normal 0 false false false EN-US X-NONE X-NONE
|
|
|
This is a Coinco MAG32SA.Takes new $1's and $5's.This validator has been completely rebuilt with new belts and works great.Works with MDB or high level interface.Replaces BA32SA.BA52SA, and MAG52SA.This validator is sold as is, please ask if you have any questions.
|
|
|
5 Selection Kleen-rite price is over $1100. Drop shelf vendor for car wash or anything you want to vend on a flat shelf. No power required. This unit is in very good condition. Very heavy. 165lbs. Local pick up only or I will work with your shipping company if you make all arangements Posted with the
|
|
|
THIS AUCTION IS FOR A POWER SUPPLY OUT OF AN NATIONAL VENDORS 158 SNACK MACHINE IT WILL ALSO WORK IN A 157 SNACK AND A 328 CUP SODA AND POSSIBLY A 167/68 SNACK THIS IS UNTESTED BUT REMOVED FROM WORKING MACHINE SHIPPING VIA US FLAT RATE PRIORITY MAIL I DO COMBINE SHIPPING WERE EVER POSSIBLE I DO NOT SHIP OUTSIDE CONTINENTAL US GOOD BIDDING AND GOOD LUCK
|
|
|
THIS AUCTION IS FOR 2 MAIN CIRCUIT BOARDS OUT OF A AUTOMATIC PRODUCTS AP 7600/6600 VENDING MACHINE NUMBERS AS FOLLOWS: 1. MAIN BOARD#1 CHIP 1.00-20-170 8035 INTEL CHIP 2. 21635 2.MAIN BOARD#2 CHIP 1. 00-21-001 8048 MITSUBISHI CHIP 2. 21635 J 3. TOUCH PAD WITH DOOOR MOLDING TRIM 4.DISPLAY 5. MONETARY BOARD 6. COIN CHUTE WITH COIN RETURN LEVER(METAL) 7. COIN CHUTE(PLASTIC) 8. COIN RETURN BUTTON 9. COIN SLOT THESE ARE UNTESTED SHIPPING VIA USPS LARGE FLAT RATE PRIORITY MAIL I DO COMBINE SHIPPING WERE EVER POSSIBLE I DO NOT SHIP OUTSIDE CONTINENTAL US GOOD BIDDING AND GOOD LUCK
|
|
|
Untested coinco mech.Has a united coin changers service tag dated'97.Thad's'bout all i know.Cash always welcome with pick-up.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf%60%60%3E-13ec08ac295-0x102-
|
|
|
Up for Bid, Three Black Plastic U-TURN Coin Collectors Terminator or Eliminator vending machine Coin Collectors in used condition. Thanks for looking! I have several of these I am selling as parts. If you need a part please ask. Flat Rate Shipping USA only Please! $ 8.00
|
|
|
This acceptor works in older coinco nickle nickle tube coin mechs. The most common is the S75-9800B.This is for acceptor only(check picture)This acceptor has been cleaned and tested and works great.Sold as is.Please ask if you have any questions.
|
|
|
This listing is for a feminine product vending machine. It is in perfect working condition with the exception of a seized upper lock cylinder on the outside door. It has all the keys for the outer locks and the inner change tray. Perfect low cost replacement for the buisness seeking a replacement unit. 5v.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bkw72shq%3E5v-13ec08db77c-0xf9-
|
|
|
This auction is for a coin Co model number 3302-GX part number 925317 this is for a Coca Cola machine I think someone broke into my machine and stole mine and left this one the side of it lol I'm not sure anything about this other than the information I have given thank you; Posted with
|
|
|
NOT WORKING BILL ACCEPTORS/VALIDATORS FOR PARTS ONLY(1) Conlux 3120(2) Conlux 3140 Total 3 validators These have been cleaned and tested to be found NOT WORKING They have plenty of usable parts including masks. Deep stackers, belts, boards, etc. Do not buy these if you want working units. They will be for you to use as parts or to repair yourself Shipping $15 to all 48 states. No Alaska or Hawaii
|
|
|
This is a used non working Dollar validator. This part needs to be refurbished.It comes with 1 dollar vaildator that come off of a soda vending machine. The reason for selling the item is to help with the cost of the new validators I purchased.
|
|
|
ITEM TOTALLY REBUILT AND ALL NEW BELTS ACCEPTS ALL BILLS
|
|
|
Unsure if they work. Sold as is for parts. Posted with g.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk%601d72f%2Bjw%60hquvg%3Eg-13ec09f9288-0xf8-
|
|
|
Selling a set of twenty-eight(28) locks with EIGHT(8) keys. All locks are keyed alike and any of the keys will fit any of the locks in the set. This is a great set. All the keys have been stamped with the number"23456" so you can easily tell what locks they go with. Many(but not all) of the locks are stamped ACE or ACE II. These locks should fit any of the T-Handle or L-Handles that are used in most standard vending machines today. Like Crane. AP, National. Rowe, USI, GPL, Dixie Narco. Royal, Vendo, Coke, Pepsi. The locks and keys are used but have been tested and found to be in good working condition. Sold as-is. More lots available. Check out our ebay store
|
|
|
Mars Vn 2501/2511 Validator Non Flash port. $1 only. Unit will be retested before it ships.
|
|
|
These are 3 used refillable syrup containers for the Coca-Cola Breakmate machines. They are in excellent condition having only been used once. As shown in the pictures they come with labels on them. Although I can't guarantee which flavors the labels will say. Please note that these three containers DO NOT come with the screw-on caps. We will ship these free anywhere in the continental US. We are a professional office coffee service in Western New York and certify these are in perfect condition. If when you receive them you find they are not in the stated condition. We will work with you to either replace them or refund your money.
|
|
|
USI 3014A Dual spiral snack machine. Machine is in good working condition. It has 5 chip trays and 1 candy tray. Also 4 gum and mint selections. It has a coinco bill validator and a mars coin mech.
|
|
|
115 Volts DC + 20 Volts• 60 Hz 0.10 Amp continuous• 1.2 Amp peak 110VDC Micromech Vending Machine Controller(VMC) applications. Height: 370 mm(14.67" base to top of coin return lever. Width: 136 mm(5.35" Depth: 76 mm(2.99" Weight: 2.6 kg(5 lbs. 12 ozs. in shipping container, The TRC coin changers(Figure 1) are factory-tuned to. Accept U.S. nickels. Dimes, quarters, and dollar coins, And can be re-tuned in the field to accept Canadian coins. with the exception of the $2 coin)
|
|
|
In wall front load vend master non-refrigerated 18 slot vending machine. If this item is purchased it will need to be picked up or shipped on a pallet and cost of shipment will depend on destination zip code. So purchaser will also be responsible for payment of shipping cost! If interested please email zip code and we will get a quote on the shipping cost. Posted with
|
|
|
This is a used ECM board for the Coca-Cola Breakmate machines. It is in excellent working condition. We will ship this free anywhere in the continental US. We are a professional office coffee service in Western New York and certify this is in perfect working condition. If when you receive it you find it is not in the stated condition. We will work with you to either replace it or refund your money.
|
|
|
USED ARDAC INCORPORATED USA 3 BILL VALIDATOR/ACCEPTER/STACKER WITH PIGTAIL PART NUMBER 88X5011 EPROM NUMBER 57X300-21 THOUGH WORKING WHEN REMOVED SEVERAL YEARS AGO, SELLING AS-IS. AS SHOWN, UNTESTED USE FOR PARTS OR TEST/REPAIR AS NEEDED
|
|
|
For auction is a Coinco BA50SA-RLA bill acceptor. This is a used unit. Reconditioned by Coinco and is in excellent working condition and ready to take both old and new(colored) bills, $1, $5, $10, $20 denominations. It is for 110volt application and can replace other Coinco models such as the Mag50SA or BA50SA. Please do not purchase this unit if you are not sure if it is the one that is correct for your vending machine or attempting to substitute for another model# except those two models shown above. I offer a DOA warranty. Sorry, I can only ship to lower 48 states. Thank You and Good Bidding. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28e013%3F%3E%3A-13ee0dc6287-0xff-
|
|
|
This auction is for 3 perfect working mars 2512 bill acceptors. They have all been checked out and flashed for the new $5 bills. 100% Satisfaction guaranteed.
|
|
|
New Page 1 2 Mars MEI AE 2611 U7 bill acceptor validators for 1 price. Both have been tested and they DO NOT WORK. Please bid accordingly. Perhaps these can be sent in to a repair center or can be repaired by the buyer or can be used for parts. The part number is 250005118. Please view photos below of this item.
|
|
|
Hi you are bidding on a used Rowe 4900 jr control board Used works good removed from working unit 7 days so you know it works good Questions call Ronnie vendall parts dept 781-849-8256 Posted with ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13ee1c3485f-0x105-
|
|
|
This auction is for a large lot of untested bill acceptors and coin changers. They are all in good condition but have not been checked out so they are being sold a is. I am sure some of them work or can easily be repaired. There are 4 coinco 9302 MDB 3 tube coin changers. 4 coinco BA 30 bill acceptors, 2 BA 50 bill acceptors and 1 USA 15 Upstack bill acceptor.
|
|
Up for bid is one Coinco Quantum coin changer completely refurbished by the manufacturer. Includes manual. Features: Modular design for easy service. Individual tubes snap in and out for easy customization. Coin tubes are clearly marked with coin denomination in bold white numbers. Programmable acceptor allows for easy reconfiguration of coin tubes in the field. Hinged front cover simplifies tube removal and serviceability. Acceptor"Park Position" allows easy access to the coin tubes. Pays change from self-loading high capacity change tubes. Two motors provide fast accurate payout. Equipped with MDB protocol. Lightweight. Rugged plastic construction. Electronic logic system is designed for reliability and performance. Item will ship within two business days of auction close. Thank ... moreyou for your consideration!
|
|
Set of 2 Medeco lock Keymark cores 4 keys and 1 control key. Also included is 4 Best brand lock cores with 7 keys and 1 control key. All in excellent condition. Please study the photos to make a determination on condition for yourself. Great for machines that are missing locks or need a replacement! NO RESERVE AUCTION! Will be shipped in a padded envelope USPS Standard Mail. Thanks for looking and good luck! PLEASE READ COMPLETELY BEFORE YOU BID! All of our items are sold“AS-IS” We do our very best describing and photographing the items we sell. We do not have extensive knowledge on everything we sell. We gladly welcome questions or requests for additional pictures for buyer’s clarification. Don’t asume anything about our items. Study the pictures(use the“zoom in” feature! and please ask questions. ... moreWe do NOT end our auctions early as a general practice to give all interested bidders a chance at our ítems. The countries which we generally ship to are Canada. Europe, United Kingdom, Germany, Asia, Japan and Australia. If you are a buyer interested in an item but live outside the United States of America, contact us before you bid. Please understand the buyer. If outside the United States, is responsible for any additional fees such as duties, customs fees, foreign taxes, import fees, ect. WITH THE EXCEPTION OF CANADA, INTERNATIONAL SHIPPING COSTS ARE GENERALLY THREE TIMES AS MUCH AS THE DOMESTIC SHIPPING RATES QUOTED IN THE AUCTIONS. PLEASE USE THIS AS A REFERENCE TO DETERMINE SHIPPING COSTS TO YOUR COUNTRY- INSTEAD OF ASKING FOR INTERNATIONAL SHIPPING QUOTES. If an item works(electronics. Clocks, items with moving parts, ect) we will clearly state that in our ad. Some of our ads will say“We can’t guarantee this item works. But we can’t see any reason why it wouldn’t” We are not attempting to“trick” anyone- We are stating honestly that we do not have the knowledge whether or not an item works like it should or not and bidders should bid accordingly. Some. If not most, working clocks need adjustments aft
|
|
|
Up for bid is a Coinco MAG52BX dollar bill acceptor. It has not been programmed for new currency but is programmable for new and future currency changes. Features: Impact resistant. Anti-jam software. Scalloped bill path for wet bill acceptance. Electronic logic system. Switch selectable acceptance of the following bills:$1. $2, $5, $10, $20. Vandal resistant design. Utilizes standard mounting and electrical interfaces. Easily accessible bill path. Self-diagnostics communicated via status light. Standard/High level security switch. Manufactured and supported by Coinco. Made in the U.S.A. Unit will ship within two business days of auction close. Thank you for your consideration!
|
|
|
Unused WBA bill validator with cash box and housing. Complete assembly.Never installed.These are used in vending machines.Gaming machines,slot machines, kiosk,etc.
|
|
|
Coinco 9300 series Coin Changer Features: Reliable 3-tube changer Interface: 110V serial interface, Payout: Nickel. Dime and quarter payout, Capacity: $40.55, item is used in working condition. Has some wear on back as seen on picture but does not interfere with works, needs some fine cleaning, is dusty, item is as is as described, no returns, us shipping.
|
|
This pair of boards both have a aticker that begin with 147. I am assuming they are for a National 147 snack vending machine. I could be wrong so please take a good look. S& H is 10.00 in the lower 48 States. Special note. You own anything you buy from me at my location. The only guaranty I will offer is a copy of the receipt the Post Office supplies me when I ship your order. I have been ripped off at least 6 times by people who are scam artists claiming that they never receive an item. If this doesn't seem fair, it really isn't but those are my rules. I am tired of pay pal taking my funds back and now I am out the item plus the postage. eBay has changed their rules and the buyer has 99% of the rights. The sellers like me that were there for eBay when they opened are left out. ... moreIf you don't agree to these simple shipping rules. Then my items are not for you, sorry to be this way. A 14 year eBay seller that never had 1 negative feedback until a year ago and then I had 5 or 6 all at once. You may request that items be sent with insurance. Signature guaranty and whatever else you like, these all cost extra. Best wishes and thanks to all my loyal clients that have been shopping for a decade with me.If you want extra shipping services or options, they cost money. ``d.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E%60%60d-13ef2bf6ba7-0x101-
|
|
MG BILL ACCEPTER VALIDATOR BL-700 USD2 WITH COIN METER COUNTER TC-126C MG BILL ACCEPTER VALIDATOR BL-700 USD2 WITH COIN METER COUNTER TC-126C IN EXCELLENT WORKING CONDITION. YOU GET THE BILL ACCEPTOR AND THE METER PLEASE SEE ALL PHOTOS TO SEE EXACT COSMETIC CONDITION. YOU GET EXACTLY WHAT YOU SEE IN THE PICTURES AND NOTHING ELSE. PLEASE EMAIL IF YOU HAVE ANY QUESTIONS PRIOR TO BIDDING. Payment must be made within 3 days of winning the auction. If payment is not made with in 3 days a"non payer" claim will be started. If payment is not made within the 6th day a"non payer strike" will be issued to your account. I will ship all items the day after your payment is made. I have several years experience in shipping many and all types of items. Turntables. Big vintage receivers, ... moresmall items, very expensive and not very expensive items will all be treated equal. They will all be packed with plenty of materials and very securely. They will also all be shipped insured. I will ship to Hawaii, Alaska and Puerto Rice, BUT, shipping will be more money. Ups does not ship to most of these states and USPS does not, If they do they charge more. So if you live in any of these states please email me with your address to get a shipping quote. All items sold as"used' are tested and in good working condition unless stated otherwise. The item will be used and not new. All items sold for"parts or non-working" will not be eligible for any refunds or returns. Although they will be sold as such there will be some specifics as to their cosmetic condition and functionality. All"vintage" items will have all specifics in the description section of the ad so please read it. There it will tell you if it is functional or not. The description will also specify the cosmetic condition. All of my items being listed will specify the cosmetic condition. But since we are all different and good cosmetic condition may not be the same for you. I have taken many pictures so you can judge for yourself. If there
|
|
|
Warehouse close-out. Refurbed 6200s. Sold many Coincos to high-satisfied customers. And now we're doing the same with these units. Acceptors leave the warehouse in working orderl. Great price. Great product. Thanks for looking. See our other listings for big deals on other items. Discounts available on multiple items. International buyers should pre-arrange shipping price before purchasing. Posted with
|
|
|
error light? COINCO BA30B not working 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13ef2fb6465-0x105-
|
|
|
This is a vfm3-l2-u4c bill acceptor. Made by mars electronics. Bill acceptor has been tested and is in working condition. This is for a 24 volt machine. Not 115. Posted with
|
|
|
Selling A Dixie-Narco Small So da machine for pats only or you can rebuild. Comes with the pump that works very well but is missing the evaporation fan and some other parts and some mot ors. This machine is very dirty. Its been settin g for a year in my shop. This is for pick up only we do not deliver. I'm starting the bid at $20.00 but the pump is worth more than that. Comes with everything you see in the pictures. If you have any Questions please ask. Please pay at time of purchase. You have 5 days to pick up. This unit is being sold as is without any warranty's or returns. Thanks for looking. 336.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2B%3E336-13ef320afe6-0x108-
|
|
|
8 FLAVOR CARDS for the ANTARES SNACK VENDING MACHINES. These are 100% ORIGINAL.NO DUPLICATES. MINT CONDITION.
|
|
|
ROWE SNACK MACHINE TRC-6000 COIN STACKER. If you are looking at this ad. You probably already know what this does. Sorry, It was left behind in a recently purchased laundromat and I have no idea if it works or not. But it's a vintage part that is from an older snack machine and is probably a hard to come by part. Sold as is.
|
|
|
You are bidding on a lot of two bill acceptors: 1. Ardac USA3 88x5011 short cord in working condition. Somewhat slow with an audible humming sound. 2. Dixie-Narco USA-15 long cord in marginal working condition. Slow intake. These bill acceptors should be restored to full operating condition before installation in a vendor. Thus I'm selling they for parts only.
|
|
|
You are bidding on a Mars TRC-6512 MDB coin acceptor in perfect condition. It was recently removed from a working vending machine. Cleaned and bench tested. The TRC-6512 is a 24 volt, 6 pin connector coin acceptor used in various vending machines. The photos are of the actual item you are bidding on. S/N 07080308282.
|
|
|
You are bidding on a Mars TRC-6000 coin acceptor for use in various vending machines. The 6000 is a 115 volt. 12 pin acceptor. The one you are bidding on was removed a while ago from a working surplussed vendor, and has been cleaned and bench tested. The one in the photo, S/N 42010000406 is the one you are bidding on.
|
|
|
This auction is for everything you need to accept large bills and pay back either $1 or $5 bills. It includes the Bill acceptor with recycle. The 6 tube coin changer and the proper harness. It is used but still functions perfectly. Satisfaction Guaranteed.
|
|
|
For auction is a Coinco Mag32R Bill Acceptor with a spare large capacity bill magazine. This is a used unit. Reconditioned by Coinco and is in excellent working condition. It has been updated to take all bills both old and new(colored bills) in $1,$5,$10,$20 denominations. The spare bill box holds approximately 700 bills. The standard bill box holds approximately 300 bills. I can offer a DOA warranty. Sorry I can ship to lower 48 states only.
|
|
|
MAKA COIN MECH. 24V 12 pin plug. Tested. Works great.
|
|
|
DIXIE NARCO DN5800 BRAND NEW BEV-MAX 2. 3 or 4 GLASS FRONT CONTROL BOARD ASSEMBLY THIS MAIN BOARD COME WITH COMPLETE HARNESS ASSEMBLY AND BRAND NEW TEMPERATURE SENSOR PLUS MANUAL HOW TO INSTALL PLEASE CHECK THE PICTURE. COME WITH 30 DAYS WARRANTY SHIPPING AND HANDLING IS FREE.
|
|
|
Up for bid is an old gas station coin changer. Remember when an employee of a gas station would pump your gas and then collect your payment and make change with this changer. It hangs on your belt. You load the tubes with quarter. Dimes, nickels and pennies and push a lever to give the customer his/her change. Everything is there. I have not worked so it may need some"fine tuning" Email me if you have any questions.
|
|
|
Two Vendo Vmax 540/720 side spacer shim part number 1078864. These side spacers are typically used for vending 16oz bottles or half liter bottles. I'm not sure if these spacers work in other Vendo models. Check with the manufacturer to make sure. I have five more available which will be auctioned following these.
|
|
|
Conlux CCM 5G-2 coin acceptor tested and working. This unit came in a vending machine which I recently purchased. However I don't use these in my business. Unit is set for one nickels, one dimes, and three quarter tubes. I also have one Conlux NBM bill acceptor available in another auction. I will combine shipping.
|
|
|
Up for auction is the Zip cashless payment system for vending machines. As pictured. Designed to fit perfectly into a bill acceptor knockout, this assembly was removed from a coffee machine that I recently purchased. I do not use these in my business so I have no use for this. Unfortunately I do not have the means to test this equipment so I can't say for sure if it works, so bid accordingly. Thanks for looking.
|
|
|
This is a good used bill acceptor harness that can be used on either a MARS BILL ACCEPTOR or an ICT B ILL ACCEPTOR. BELOW IS AN EXAMPLE OF THE TWO DIFFERENT STYLE BILL ACCEPTORS THAT THIS HARNESS WORKS ON: ANY MARS AC STACKERS A LL AC ICT STACKER UN ITS Posted with
|
|
|
WHAT WE HAVE HERE IS A PAIR OF COINCO BA32R BILL ACCEPTORS IN NEED OF REPAIR.BILLS GO IN AND OUT
|
|
|
WHAT WE HAVE HERE IS A NICE WORKING ROWE C2 CHANGER CONTROL BOARD
|
|
|
WHAT WE HAVE HERE IS A NICE WORKING AUTOMATIC PRODUCTS 7000 CONTROL BOARD
|
|
|
LOT OF 2 SPIRAL12 COUNT SPIRAL COIL FOR AUTOMATIC PRODUCTS SNACK VENDING MACHINE. WORKS VERY GOOD. 100% SATISFACTION. DIMENSIONS: 15 INCHES LONG X 2-3/4 INCHES IN DIAMETER. 1 INCH SPACING IN BETWEEN COILS. 12 COUNT COIL. THESE ARE THE ACTUAL PHOTOS OF THE SPIRALS FOR SALE. MADE IN U.S.A. HEAVY DUTY METAL CONSTRUCTION: 5/32 INCH IN DIAMETER. INCLUDED: 2 SPIRALS. AND 2 COTTER PINS FOR INSTALLATION. WE ACCEPT ANY KIND OF PAYMENT AND WILL SHIP WORLDWIDE. WE AUTOMATICALLY LEAVE POSITIVE FEEDBACK AFTER IS LEFT FOR US.
|
|
|
This is a Mars 2502 U3.Takes new $1's and $5's.This validator has been cleaned and tested and works great.The MDB harness is also included.Works with MDB systems.Sold as is. Please ask if you have any questions.
|
|
|
For auction is a Coinco BP2BX Bill Acceptor. This is a used unit.Reconditioned by Coinco and is in excellent working condition. It has an expandable bill box that will hold approximately 500 bills. It has the proper 6 pin plugs for your 24 volt vending machine. It has been updated to accept both $1 and old and new(colored) $5 bills. This unit is typically used on can and bottle cold drink machines that require the 6 pin, 24volt application. I can give a DOA warranty. Sorry, only shipping to lower 48 states. Thank You and Good Bidding.
|
|
|
These came from a drink machine I am not sure which one but they are all working and usable. ag6 2.RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fuk.rp73%28c%3Eag6%3E2-13f0cb79d22-0xf5-
|
|
|
COINCO MAG 52 R in excellent condition. Accepts all old and new Colored bills.
|
|
Click Here. Double your traffic. Get Vendio Gallery- Now FREE! MEI BILL ACCEPTOR ~ SERIES 2000 ~ AE 2411 U7 ~ 115 VAC(Volt) + Flashport Click Images to Enlarge MEI Bill Acceptor(Series 2000) Model AE 2411 U7 LIKE NEW Condition Refurbished Unit This bill acceptor and validator is ready for use in an arcade or other vending machine to accept $1. $2, and $5 bills. It is unclear whether this unit has been flashed to accept the new $5 bills, but the flashport is available for updating. Switches can be set to only allow $1 bills or to allow a combination of different bill types. Included is a 500-note magazine. This item is a refurbished unit and is in like new condition with no discernible use wear(see images for details) We also ship internationally. Check out the Vendio shipping calculator for ... moredetails. Condition: Used Refurbished- like new. Makes a great gift for Any Occasion andale andalesell. Click Images to Enlarge Payment Options: PayPal Shipping Options: Domestic shipping: Weight based Shipping Charges. Domestic Carriers are: Usps Parcel Select. Usps Priority, Usps Express Mail International shipping: Weight based Shipping Charges. International Carriers are: Usps First-Class Intl. Usps Priority Intl, Usps Express Intl I will ship to: United States. Worldwide[Weight] 4 lbs. Shipping and Handling: Customer Service Policy: We offer no-markup shipping prices. The shipping rate you pay is the actual cost incurred by us to send you the purchase. Also. We will combine your purchases to maximize your shipping cost savings. If you purchase multiple items from us. Please wait for a combined invoice before sending your payment. ARE YOU AN INTERNATIONAL BUYER? We love shipping to our international customers. And we offer the same no-markup shipping policy to you. The price we charge to you is the same as our cost to ship your order. Please know that we are not responsible for customs fees. Duties, or delays once the package leaves the United States. Customs forms will be marked as"Merchandise, and it is your
|
|
|
Lot of 74 vending machine keys. Some are marked ACE Chicago Lock Co. other are unmarked. Many different numbers. Some duplicates, the most duplicated numbers are GR200, GR7963 and HG1239. They are in good shape, no abuse. Payment& Shipping SHIPPING COST: $5.00(Priority mail) We accept PayPal and cashiers checks. We ship small. Light weight items via First Class mail& Priority mail. Large and heavy items are shipped via FedEx ground/home delivery. PayPal. EBay's service to make fast, easy, and secure payments for your eBay purchases!
|
|
|
This is a coin tube that was used for a Coffee Inn's change machine that was attached to an Antares Vending machine. Tested to be working. Used but great condition. Posted with
|
|
|
FREE SHIPPING usps priority mail Mars vn4510 34V 6 pin 2 quarter tubes. 1 dime, 1 nickel Refurbished by Changer Services INC. Tested. Works perfect Any mechanical issues. Return for a full refund, and WE PAY FOR THE RETURN SHIPPING!
|
|
|
PLASTIC COIN CHUTE FOR VENDING MACHINE SEE PICTURES FOR DETAILS
|
|
|
MARS MEI AE 2831 D5. D7 AND D10 BILL ACCEPTORS WITH WIRING HARNESS. THIS ITEM IS BEING SOLD AS IS. ALL OF THESE BILL ACCEPTORS ARE IN WORKING ORDER AND FULLY FUNCTIONING. RcmdId ViewItemDescV4,RlogId p4%60bo7%60jtb9%3Fvo%7B%3Dd70f%2Bf52%3E-13f13f0d407-0x103-
|
|
|
Control board removed from working changer model AC 1005.
|
|
|
115 V; 12 pins. removed from working machine. Note: diffirent ser. than on the photo.
|
|
|
DESCRIPTION: This is a 24 VAC Dixie-Narco Up Stack Dollar Bill Acceptor/ Untested/AS-IS. Looks to be in great shape. I have no way of testing this so it is sold AS-IS. I purchased it from an estate sale with numerous other items and don't have the time or capability to test it. It very well may work fine. This is a great chance to save. What is shown is what will be shipped. Thanks for looking at my item. Please check all pictures carefully as they are part of the description.
|
|
|
Main Power Supply Unit For Rowe 4900. Works Great. Note: The power Cord Has Tape Around A Portion Of It; I'm Not sure why; I Have Been Using It Like This For 3 Years And Never Had Any Problems With It. Comes with my personal 14 day money back warranty. Please look at all the pictures. Please pay at time of purchase. I will ship within 72hrs of cleared payment. Thanks for looking
|
|
|
Rowe 4900 inventory and test vend switches. Works great. Comes with my personal 14 day money back warranty. Please look at the pictures. Please pay at time of purchase. I will ship within 72hrs of cleared payment. Thanks for looking.
|
|
|
PLEASE READ! 2 for one Price coin mechs. one is a Mars and the other is a Coinco Both not working and is being sold as is without warranties or returns. I'm selling for repair only These have never been teste d and my or my not work Please look at pictures to see if this is what you need Please pay at time of purchase I will ship within 72hrs of cleared payment Thank s for looking Posted with
|
|
|
MARS ELECTRONICS TRC-6512 MDB 24 VOLT COIN CHANGER/ ACCEPTOR/ MECH PART NUMBER 119546012 PROFESSIONALLY REFURBISHED BY DIEB ENTERPRISES ON 03-08-2013. IT'S BEEN COVERED IN PLASTIC AND STORED SINCE RECEIVING IT FROM DIEB ON 03-18-2013 HOLDS: 25- $15.50 MAX.10- $8.40 MAX.05- $2.90 MAX 24 VOLT PLUG FOR QUICK AND EASY INSTALLATION YOU WILL RECEIVE EXACTLY WHAT IS PICTURED I WILL SHIP ITEM OUT SAME DAY IF PAYMENT IS RECEIVED BY 12PM. PACIFIC TIME I WILL SHIP TO THE UNITED STATES(EXCLUDING ALASKA AND HAWAII) AND TO ELIGIBLE COUNTRIES IN THE EBAY GLOBAL SHIPPING PROGRAM FREE SHIPPING I ACCEPT PAYPAL ONLY IMMEDIATE PAYMENT REQUIRED IF YOU HAVE ANY QUESTIONS AT ALL PLEASE FEEL FREE TO ASK THANK YOU FOR LOOKING
|
|
|
You are viewing an InOne Technologies VMC upgrade kit for the National 147/148 vending machine. This is the latest style of board. One whole piece. It also includes the money board, Dex harness, new digital display, and the instruction manual. This was pulled from a working machine, although we never tested it before we pulled it off. All parts of the kit that were inside the machine are included in this kit, but I am not sure if it is complete or not, we never have sold these or serviced them. As is sale, all items are in excellent condition, backboard included as shown in picture. Thanks! 970-623-1272 for questions.
|
|
|
For sale is a Coinco coin changer model s75-9800B. It was replaced by a newer model awhile ago in a soda can vending machine. The machine would often not accept coins. I also believe the machine is missing a plastic cover that should go on the face of the slug rejecter/coin validator. Not sure how important that is. Item being sold as is for parts or repair. Please let me know if have any questions. Thanks!
|
|
|